void DlgSettingsColorFilter::load (CmdMediator &cmdMediator)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsColorFilter::load";
setCmdMediator (cmdMediator);
// Flush old data
if (m_modelColorFilterBefore != 0) {
delete m_modelColorFilterBefore;
}
if (m_modelColorFilterAfter != 0) {
delete m_modelColorFilterAfter;
}
// Save new data
m_modelColorFilterBefore = new DocumentModelColorFilter (cmdMediator.document());
m_modelColorFilterAfter = new DocumentModelColorFilter (cmdMediator.document());
// Populate controls. First load curve name combobox. The curve-specific controls get loaded in slotCurveName
m_cmbCurveName->clear ();
m_cmbCurveName->addItem (AXIS_CURVE_NAME);
QStringList curveNames = cmdMediator.curvesGraphsNames();
QStringList::const_iterator itr;
for (itr = curveNames.begin (); itr != curveNames.end (); itr++) {
QString curveName = *itr;
m_cmbCurveName->addItem (curveName);
}
// This sets the curve name
m_cmbCurveName->setCurrentText (mainWindow().selectedGraphCurve());
loadForCurveName();
enableOk (false); // Disable Ok button since there not yet any changes
}
void DlgSettingsMainWindow::loadMainWindowModel (CmdMediator &cmdMediator,
const MainWindowModel &modelMainWindow)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsMainWindow::loadMainWindowModel";
setCmdMediator (cmdMediator);
// Flush old data
if (m_modelMainWindowBefore != 0) {
delete m_modelMainWindowBefore;
}
if (m_modelMainWindowAfter != 0) {
delete m_modelMainWindowAfter;
}
// Save new data
m_modelMainWindowBefore = new MainWindowModel (modelMainWindow);
m_modelMainWindowAfter = new MainWindowModel (modelMainWindow);
// Populate controls
int index = m_cmbZoomFactor->findData (m_modelMainWindowAfter->zoomFactorInitial());
m_cmbZoomFactor->setCurrentIndex (index);
index = m_cmbZoomControl->findData (m_modelMainWindowAfter->zoomControl());
m_cmbZoomControl->setCurrentIndex (index);
updateControls ();
enableOk (false); // Disable Ok button since there not yet any changes
}
void DlgSettingsPointMatch::load (CmdMediator &cmdMediator)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsPointMatch::load";
setCmdMediator (cmdMediator);
// Flush old data
if (m_modelPointMatchBefore != 0) {
delete m_modelPointMatchBefore;
}
if (m_modelPointMatchAfter != 0) {
delete m_modelPointMatchAfter;
}
// Save new data
m_modelPointMatchBefore = new DocumentModelPointMatch (cmdMediator.document());
m_modelPointMatchAfter = new DocumentModelPointMatch (cmdMediator.document());
// Sanity checks. Incoming defaults must be acceptable to the local limits
ENGAUGE_ASSERT (POINT_SEPARATION_MIN <= m_modelPointMatchAfter->minPointSeparation());
ENGAUGE_ASSERT (POINT_SEPARATION_MAX > m_modelPointMatchAfter->minPointSeparation());
ENGAUGE_ASSERT (POINT_SIZE_MIN <= m_modelPointMatchAfter->maxPointSize());
ENGAUGE_ASSERT (POINT_SIZE_MAX > m_modelPointMatchAfter->maxPointSize());
// Populate controls
m_spinMinPointSeparation->setValue(m_modelPointMatchAfter->minPointSeparation());
m_spinPointSize->setValue(m_modelPointMatchAfter->maxPointSize());
int indexAccepted = m_cmbAcceptedPointColor->findData(QVariant(m_modelPointMatchAfter->paletteColorAccepted()));
ENGAUGE_ASSERT (indexAccepted >= 0);
m_cmbAcceptedPointColor->setCurrentIndex(indexAccepted);
int indexCandidate = m_cmbCandidatePointColor->findData(QVariant(m_modelPointMatchAfter->paletteColorCandidate()));
ENGAUGE_ASSERT (indexCandidate >= 0);
m_cmbCandidatePointColor->setCurrentIndex(indexCandidate);
int indexRejected = m_cmbRejectedPointColor->findData(QVariant(m_modelPointMatchAfter->paletteColorRejected()));
ENGAUGE_ASSERT (indexRejected >= 0);
m_cmbRejectedPointColor->setCurrentIndex(indexRejected);
initializeBox ();
// Fix the preview size using an invisible boundary
QGraphicsRectItem *boundary = m_scenePreview->addRect (QRect (0,
0,
cmdMediator.document().pixmap().width (),
cmdMediator.document().pixmap().height ()));
boundary->setVisible (false);
m_scenePreview->addPixmap (cmdMediator.document().pixmap());
updateControls();
enableOk (false); // Disable Ok button since there not yet any changes
updatePreview();
}
void DlgSettingsDigitizeCurve::updateControls()
{
// Cursor has to fit into current extent
bool isGoodState = 2 * (m_modelDigitizeCurveAfter->cursorInnerRadius() + LINE_LENGTH_MIN) <=
CursorSizeToPixels (m_modelDigitizeCurveAfter->cursorSize());
enableOk (isGoodState);
m_spinInnerRadius->setEnabled (m_btnCustom->isChecked());
m_cmbSize->setEnabled (m_btnCustom->isChecked());
m_spinLineWidth->setEnabled (m_btnCustom->isChecked());
}
void DlgSettingsColorFilter::updatePreview ()
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettings::updatePreview";
enableOk (true);
// This (indirectly) updates the preview
QString curveName = m_cmbCurveName->currentText();
emit signalApplyFilter (m_modelColorFilterAfter->colorFilterMode(curveName),
m_modelColorFilterAfter->low(curveName),
m_modelColorFilterAfter->high(curveName));
}
bool DateInterval::qt_invoke( int _id, QUObject* _o )
{
switch ( _id - staticMetaObject()->slotOffset() ) {
case 0: languageChange(); break;
case 1: enableDate(); break;
case 2: enableOk(); break;
case 3: ok(); break;
default:
return QDialog::qt_invoke( _id, _o );
}
return TRUE;
}
NamespaceManagementDialog::NamespaceManagementDialog(QWidget *parent, Element *element, NamespaceManager *nsManager) :
QDialog(parent),
ui(new Ui::NamespaceManagementDialog)
{
_goComboNs = false;
_element = element ;
_nsManager = nsManager ;
ui->setupUi(this);
init();
setupData();
updateButtonsNs();
enableOk();
}
void DlgSettingsGridRemoval::load (CmdMediator &cmdMediator)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsGridRemoval::load";
setCmdMediator (cmdMediator);
// Flush old data
if (m_modelGridRemovalBefore != 0) {
delete m_modelGridRemovalBefore;
}
if (m_modelGridRemovalAfter != 0) {
delete m_modelGridRemovalAfter;
}
// Save new data
m_modelGridRemovalBefore = new DocumentModelGridRemoval (cmdMediator.document());
m_modelGridRemovalAfter = new DocumentModelGridRemoval (cmdMediator.document());
// Sanity checks. Incoming defaults must be acceptable to the local limits
ENGAUGE_ASSERT (CLOSE_DISTANCE_MIN <= m_modelGridRemovalAfter->closeDistance());
ENGAUGE_ASSERT (CLOSE_DISTANCE_MAX >= m_modelGridRemovalAfter->closeDistance());
// Populate controls
m_chkRemoveGridLines->setChecked (m_modelGridRemovalAfter->removeDefinedGridLines());
m_editCloseDistance->setText (QString::number (m_modelGridRemovalAfter->closeDistance()));
int indexDisableX = m_cmbDisableX->findData (QVariant (m_modelGridRemovalAfter->gridCoordDisableX()));
m_cmbDisableX->setCurrentIndex (indexDisableX);
m_editCountX->setText(QString::number(m_modelGridRemovalAfter->countX()));
m_editStartX->setText(QString::number(m_modelGridRemovalAfter->startX()));
m_editStepX->setText(QString::number(m_modelGridRemovalAfter->stepX()));
m_editStopX->setText(QString::number(m_modelGridRemovalAfter->stopX()));
int indexDisableY = m_cmbDisableX->findData (QVariant (m_modelGridRemovalAfter->gridCoordDisableY()));
m_cmbDisableY->setCurrentIndex (indexDisableY);
m_editCountY->setText(QString::number(m_modelGridRemovalAfter->countY()));
m_editStartY->setText(QString::number(m_modelGridRemovalAfter->startY()));
m_editStepY->setText(QString::number(m_modelGridRemovalAfter->stepY()));
m_editStopY->setText(QString::number(m_modelGridRemovalAfter->stopY()));
m_scenePreview->clear();
m_scenePreview->addPixmap (cmdMediator.document().pixmap());
updateControls ();
enableOk (false); // Disable Ok button since there not yet any changes
updatePreview();
}
DlgImportAdvanced::DlgImportAdvanced(MainWindow &mainWindow) :
DlgSettingsAbstractBase (tr ("Import Advanced"),
"DlgImportAdvanced",
mainWindow)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgImportAdvanced::DlgImportAdvanced";
QWidget *subPanel = createSubPanel ();
finishPanel (subPanel,
MINIMUM_DIALOG_WIDTH_COORDS);
// Accept even the default value without any additional actions, rather than delay the Ok button to after a change
enableOk (true);
setDisableOkAtStartup (false);
}
void DlgSettingsExportFormat::updateControls ()
{
bool isGoodState = goodIntervalFunctions() &&
goodIntervalRelations();
enableOk (isGoodState);
int selectedForInclude = m_listExcluded->selectedItems().count();
int selectedForExclude = m_listIncluded->selectedItems().count();
int inInclude = m_listIncluded->count();
m_btnInclude->setEnabled (selectedForInclude > 0); // Need at least one selection
m_btnExclude->setEnabled ((selectedForExclude > 0) && (inInclude - selectedForExclude > 0)); // Need at least one selection, and one left after the move
m_editFunctionsPointsEvenlySpacing->setEnabled (m_haveFunction && m_btnFunctionsPointsEvenlySpaced->isChecked ());
m_editRelationsPointsEvenlySpacing->setEnabled (m_haveRelation && m_btnRelationsPointsEvenlySpaced->isChecked ());
m_editXLabel->setEnabled (!m_btnHeaderNone->isChecked());
}
void DlgSettingsSegments::load (CmdMediator &cmdMediator)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsSegments::load";
// Loading starts here
m_loading = true;
setCmdMediator (cmdMediator);
// Flush old data
if (m_modelSegmentsBefore != 0) {
delete m_modelSegmentsBefore;
}
if (m_modelSegmentsAfter != 0) {
delete m_modelSegmentsAfter;
}
// Save new data
m_modelSegmentsBefore = new DocumentModelSegments (cmdMediator.document());
m_modelSegmentsAfter = new DocumentModelSegments (cmdMediator.document());
// Sanity checks. Incoming defaults must be acceptable to the local limits
ENGAUGE_ASSERT (MIN_LENGTH_MIN <= m_modelSegmentsAfter->minLength ());
ENGAUGE_ASSERT (MIN_LENGTH_MAX >= m_modelSegmentsAfter->minLength ());
ENGAUGE_ASSERT (POINT_SEPARATION_MIN <= m_modelSegmentsAfter->pointSeparation());
ENGAUGE_ASSERT (POINT_SEPARATION_MAX >= m_modelSegmentsAfter->pointSeparation());
// Populate controls
m_spinPointSeparation->setValue (m_modelSegmentsAfter->pointSeparation());
m_spinMinLength->setValue (m_modelSegmentsAfter->minLength());
m_chkFillCorners->setChecked (m_modelSegmentsAfter->fillCorners ());
m_spinLineWidth->setValue (m_modelSegmentsAfter->lineWidth());
int indexLineColor = m_cmbLineColor->findData(QVariant (m_modelSegmentsAfter->lineColor()));
ENGAUGE_ASSERT (indexLineColor >= 0);
m_cmbLineColor->setCurrentIndex(indexLineColor);
// Loading finishes here
m_loading = false;
updateControls();
enableOk (false); // Disable Ok button since there not yet any changes
updatePreview();
}
void DlgSettingsGridRemoval::updateControls ()
{
m_editCloseDistance->setEnabled (m_chkRemoveGridLines->isChecked ());
m_cmbDisableX->setEnabled (m_chkRemoveGridLines->isChecked ());
GridCoordDisable disableX = (GridCoordDisable) m_cmbDisableX->currentData().toInt();
m_editCountX->setEnabled (m_chkRemoveGridLines->isChecked () && (disableX != GRID_COORD_DISABLE_COUNT));
m_editStartX->setEnabled (m_chkRemoveGridLines->isChecked () && (disableX != GRID_COORD_DISABLE_START));
m_editStepX->setEnabled (m_chkRemoveGridLines->isChecked () && (disableX != GRID_COORD_DISABLE_STEP));
m_editStopX->setEnabled (m_chkRemoveGridLines->isChecked () && (disableX != GRID_COORD_DISABLE_STOP));
m_cmbDisableY->setEnabled (m_chkRemoveGridLines->isChecked ());
GridCoordDisable disableY = (GridCoordDisable) m_cmbDisableY->currentData().toInt();
m_editCountY->setEnabled (m_chkRemoveGridLines->isChecked () && (disableY != GRID_COORD_DISABLE_COUNT));
m_editStartY->setEnabled (m_chkRemoveGridLines->isChecked () && (disableY != GRID_COORD_DISABLE_START));
m_editStepY->setEnabled (m_chkRemoveGridLines->isChecked () && (disableY != GRID_COORD_DISABLE_STEP));
m_editStopY->setEnabled (m_chkRemoveGridLines->isChecked () && (disableY != GRID_COORD_DISABLE_STOP));
QString textCloseDistance = m_editCloseDistance->text();
QString textCountX = m_editCountX->text();
QString textStartX = m_editStartX->text();
QString textStepX = m_editStepX->text();
QString textStopX = m_editStopX->text();
QString textCountY = m_editCountY->text();
QString textStartY = m_editStartY->text();
QString textStepY = m_editStepY->text();
QString textStopY = m_editStopY->text();
int pos;
bool isOk = (m_validatorCloseDistance->validate (textCloseDistance, pos) == QValidator::Acceptable) &&
(m_validatorCountX->validate (textCountX, pos) == QValidator::Acceptable) &&
(m_validatorStartX->validate (textStartX, pos) == QValidator::Acceptable) &&
(m_validatorStepX->validate (textStepX, pos) == QValidator::Acceptable) &&
(m_validatorStopX->validate (textStopX, pos) == QValidator::Acceptable) &&
(m_validatorCountY->validate (textCountY, pos) == QValidator::Acceptable) &&
(m_validatorStartY->validate (textStartY, pos) == QValidator::Acceptable) &&
(m_validatorStepY->validate (textStepY, pos) == QValidator::Acceptable) &&
(m_validatorStopY->validate (textStopY, pos) == QValidator::Acceptable);
enableOk (isOk);
}
void DlgSettingsMainWindow::loadMainWindowModel (CmdMediator &cmdMediator,
const MainWindowModel &modelMainWindow)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsMainWindow::loadMainWindowModel";
setCmdMediator (cmdMediator);
// Flush old data
delete m_modelMainWindowBefore;
delete m_modelMainWindowAfter;
// Save new data
m_modelMainWindowBefore = new MainWindowModel (modelMainWindow);
m_modelMainWindowAfter = new MainWindowModel (modelMainWindow);
// Populate controls
int index = m_cmbZoomFactor->findData (m_modelMainWindowAfter->zoomFactorInitial());
m_cmbZoomFactor->setCurrentIndex (index);
index = m_cmbZoomControl->findData (m_modelMainWindowAfter->zoomControl());
m_cmbZoomControl->setCurrentIndex (index);
QString locLabel = QLocaleToString (m_modelMainWindowAfter->locale());
index = m_cmbLocale->findText (locLabel);
m_cmbLocale->setCurrentIndex(index);
index = m_cmbImportCropping->findData (m_modelMainWindowAfter->importCropping());
m_cmbImportCropping->setCurrentIndex (index);
m_chkTitleBarFormat->setChecked (m_modelMainWindowAfter->mainTitleBarFormat() == MAIN_TITLE_BAR_FORMAT_PATH);
#ifdef ENGAUGE_PDF
index = m_cmbPdfResolution->findData (m_modelMainWindowAfter->pdfResolution());
m_cmbPdfResolution->setCurrentIndex(index);
#endif
m_spinMaximumGridLines->setValue (m_modelMainWindowAfter->maximumGridLines());
m_spinHighlightOpacity->setValue (m_modelMainWindowAfter->highlightOpacity());
m_chkSmallDialogs->setChecked (m_modelMainWindowAfter->smallDialogs());
m_chkDragDropExport->setChecked (m_modelMainWindowAfter->dragDropExport());
m_spinSignificantDigits->setValue (m_modelMainWindowAfter->significantDigits ());
updateControls ();
enableOk (false); // Disable Ok button since there not yet any changes
}
void DlgSettingsDigitizeCurve::load (CmdMediator &cmdMediator)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsDigitizeCurve::load";
setCmdMediator (cmdMediator);
// Flush old data
if (m_modelDigitizeCurveBefore != 0) {
delete m_modelDigitizeCurveBefore;
}
if (m_modelDigitizeCurveAfter != 0) {
delete m_modelDigitizeCurveAfter;
}
// Save new data
m_modelDigitizeCurveBefore = new DocumentModelDigitizeCurve (cmdMediator.document());
m_modelDigitizeCurveAfter = new DocumentModelDigitizeCurve (cmdMediator.document());
// Sanity checks. Incoming defaults must be acceptable to the local limits
ENGAUGE_ASSERT (INNER_RADIUS_MIN <= m_modelDigitizeCurveAfter->cursorInnerRadius ());
ENGAUGE_ASSERT (INNER_RADIUS_MAX >= m_modelDigitizeCurveAfter->cursorInnerRadius ());
ENGAUGE_ASSERT (LINE_WIDTH_MIN <= m_modelDigitizeCurveAfter->cursorLineWidth ());
ENGAUGE_ASSERT (LINE_WIDTH_MAX >= m_modelDigitizeCurveAfter->cursorLineWidth ());
// Populate controls
m_btnStandard->setChecked (m_modelDigitizeCurveAfter->cursorStandardCross());
m_btnCustom->setChecked (!m_modelDigitizeCurveAfter->cursorStandardCross());
m_spinInnerRadius->setValue (m_modelDigitizeCurveAfter->cursorInnerRadius());
int index = m_cmbSize->findData (QVariant (m_modelDigitizeCurveAfter->cursorSize()));
m_cmbSize->setCurrentIndex (index);
m_spinLineWidth->setValue (m_modelDigitizeCurveAfter->cursorLineWidth());
updateControls();
enableOk (false); // Disable Ok button since there not yet any changes
updatePreview();
}
void DlgSettingsSegments::updateControls()
{
enableOk (true);
}
void DlgSettingsExportFormat::load (CmdMediator &cmdMediator)
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsExportFormat::load";
setCmdMediator (cmdMediator);
// Flush old data
if (m_modelExportBefore != 0) {
delete m_modelExportBefore;
}
if (m_modelExportAfter != 0) {
delete m_modelExportAfter;
}
// Save new data
m_modelExportBefore = new DocumentModelExportFormat (cmdMediator.document());
m_modelExportAfter = new DocumentModelExportFormat (cmdMediator.document());
// Populate controls. First load excluded curves
m_listExcluded->clear();
QStringList curveNamesExcluded = m_modelExportAfter->curveNamesNotExported();
QStringList::const_iterator itr;
for (itr = curveNamesExcluded.begin (); itr != curveNamesExcluded.end(); ++itr) {
QString curveNameNotExported = *itr;
m_listExcluded->addItem (curveNameNotExported);
}
// Include curves that are not excluded
m_listIncluded->clear();
QStringList curveNamesAll = cmdMediator.document().curvesGraphsNames();
for (itr = curveNamesAll.begin (); itr != curveNamesAll.end(); itr++) {
QString curveName = *itr;
if (!curveNamesExcluded.contains (curveName)) {
m_listIncluded->addItem (curveName);
}
}
ExportPointsSelectionFunctions pointsSelectionFunctions = m_modelExportAfter->pointsSelectionFunctions();
m_btnFunctionsPointsAllCurves->setChecked (pointsSelectionFunctions == EXPORT_POINTS_SELECTION_FUNCTIONS_INTERPOLATE_ALL_CURVES);
m_btnFunctionsPointsFirstCurve->setChecked (pointsSelectionFunctions == EXPORT_POINTS_SELECTION_FUNCTIONS_INTERPOLATE_FIRST_CURVE);
m_btnFunctionsPointsEvenlySpaced->setChecked (pointsSelectionFunctions == EXPORT_POINTS_SELECTION_FUNCTIONS_INTERPOLATE_PERIODIC);
m_btnFunctionsPointsRaw->setChecked (pointsSelectionFunctions == EXPORT_POINTS_SELECTION_FUNCTIONS_RAW);
ExportLayoutFunctions layoutFunctions = m_modelExportAfter->layoutFunctions ();
m_btnFunctionsLayoutAllCurves->setChecked (layoutFunctions == EXPORT_LAYOUT_ALL_PER_LINE);
m_btnFunctionsLayoutOneCurve->setChecked (layoutFunctions == EXPORT_LAYOUT_ONE_PER_LINE);
ExportPointsSelectionRelations pointsSelectionRelations = m_modelExportAfter->pointsSelectionRelations();
m_btnRelationsPointsEvenlySpaced->setChecked (pointsSelectionRelations == EXPORT_POINTS_SELECTION_RELATIONS_INTERPOLATE);
m_btnRelationsPointsRaw->setChecked (pointsSelectionRelations == EXPORT_POINTS_SELECTION_RELATIONS_RAW);
ExportDelimiter delimiter = m_modelExportAfter->delimiter ();
m_btnDelimitersCommas->setChecked (delimiter == EXPORT_DELIMITER_COMMA);
m_btnDelimitersSpaces->setChecked (delimiter == EXPORT_DELIMITER_SPACE);
m_btnDelimitersTabs->setChecked (delimiter == EXPORT_DELIMITER_TAB);
ExportHeader header = m_modelExportAfter->header ();
m_btnHeaderNone->setChecked (header == EXPORT_HEADER_NONE);
m_btnHeaderSimple->setChecked (header == EXPORT_HEADER_SIMPLE);
m_btnHeaderGnuplot->setChecked (header == EXPORT_HEADER_GNUPLOT);
m_editXLabel->setText (m_modelExportAfter->xLabel());
m_editFunctionsPointsEvenlySpacing->setText (QString::number (m_modelExportAfter->pointsIntervalFunctions()));
m_editRelationsPointsEvenlySpacing->setText (QString::number (m_modelExportAfter->pointsIntervalRelations()));
ExportPointsIntervalUnits pointsIntervalUnitsFunctions = m_modelExportAfter->pointsIntervalUnitsRelations();
ExportPointsIntervalUnits pointsIntervalUnitsRelations = m_modelExportAfter->pointsIntervalUnitsRelations();
int indexFunctions = m_cmbRelationsPointsEvenlySpacingUnits->findData (QVariant (pointsIntervalUnitsFunctions));
int indexRelations = m_cmbRelationsPointsEvenlySpacingUnits->findData (QVariant (pointsIntervalUnitsRelations));
m_cmbFunctionsPointsEvenlySpacingUnits->setCurrentIndex (indexFunctions);
m_cmbRelationsPointsEvenlySpacingUnits->setCurrentIndex (indexRelations);
initializeIntervalConstraints ();
updateControls();
updateIntervalConstraints();
enableOk (false); // Disable Ok button since there not yet any changes
updatePreview();
}
void DlgSettingsColorFilter::updateHistogram()
{
LOG4CPP_INFO_S ((*mainCat)) << "DlgSettingsColorFilter::updateHistogram";
enableOk (true);
const double PEN_WIDTH = 0.0; // Zero value gives one-pixel width at all scales
QString curveName = m_cmbCurveName->currentText();
m_sceneProfile->clear();
m_scale->setColorFilterMode (m_modelColorFilterAfter->colorFilterMode(curveName));
// Start with original image
QImage image = cmdMediator().document().pixmap().toImage();
double *histogramBins = new double [ColorFilterHistogram::HISTOGRAM_BINS ()];
ColorFilter filter;
ColorFilterHistogram filterHistogram;
int maxBinCount;
filterHistogram.generate (filter,
histogramBins,
m_modelColorFilterAfter->colorFilterMode (curveName),
image,
maxBinCount);
// Draw histogram, normalizing so highest peak exactly fills the vertical range. Log scale is used
// so smaller peaks do not disappear
double logMaxBinCount = qLn (maxBinCount);
for (int bin = 1; bin < ColorFilterHistogram::HISTOGRAM_BINS (); bin++) {
double x0 = PROFILE_SCENE_WIDTH () * (bin - 1.0) / (ColorFilterHistogram::HISTOGRAM_BINS () - 1.0);
// Map logPixelCount through 0 to 0 through PROFILE_SCENE_HEIGHT-1, using log scale
double count0 = 1.0 + histogramBins [bin - 1];
double y0 = (PROFILE_SCENE_HEIGHT () - 1.0) * (1.0 - qLn (count0) / logMaxBinCount);
double x1 = PROFILE_SCENE_WIDTH () * (bin - 0.0) / (ColorFilterHistogram::HISTOGRAM_BINS () - 1.0);
// Map logPixelCount through 0 to 0 through PROFILE_SCENE_HEIGHT-1, using log scale
double count1 = 1.0 + histogramBins [bin];
double y1 = (PROFILE_SCENE_HEIGHT () - 1.0) * (1.0 - qLn (count1) / logMaxBinCount);
QGraphicsLineItem *line = new QGraphicsLineItem (x0, y0, x1, y1);
line->setPen (QPen (QBrush (Qt::black), PEN_WIDTH));
m_sceneProfile->addItem (line);
}
// Create low and high dividers
m_dividerLow = new ViewProfileDivider(*m_sceneProfile,
*m_viewProfile,
PROFILE_SCENE_WIDTH (),
PROFILE_SCENE_HEIGHT (),
PROFILE_SCENE_HEIGHT () * 2.0 / 3.0,
true);
m_dividerHigh = new ViewProfileDivider(*m_sceneProfile,
*m_viewProfile,
PROFILE_SCENE_HEIGHT (),
PROFILE_SCENE_WIDTH (),
PROFILE_SCENE_HEIGHT () / 3.0,
false);
// Connect the dividers to each other since the shaded areas depend on both divides when low divider is
// moved to the right of the high divider
connect (m_dividerLow, SIGNAL (signalMovedLow (double)), m_dividerHigh, SLOT (slotOtherMoved(double)));
connect (m_dividerHigh, SIGNAL (signalMovedHigh (double)), m_dividerLow, SLOT (slotOtherMoved(double)));
// Update preview when the dividers move
connect (m_dividerLow, SIGNAL (signalMovedLow (double)), this, SLOT (slotDividerLow (double)));
connect (m_dividerHigh, SIGNAL(signalMovedHigh (double)), this, SLOT (slotDividerHigh (double)));
if (m_btnForeground->isChecked()) {
// Foreground
m_dividerLow->setX (m_modelColorFilterAfter->foregroundLow(curveName), FOREGROUND_MIN, FOREGROUND_MAX);
m_dividerHigh->setX (m_modelColorFilterAfter->foregroundHigh(curveName), FOREGROUND_MIN, FOREGROUND_MAX);
} else if (m_btnIntensity->isChecked()) {
// Intensity
m_dividerLow->setX (m_modelColorFilterAfter->intensityLow(curveName), INTENSITY_MIN, INTENSITY_MAX);
m_dividerHigh->setX (m_modelColorFilterAfter->intensityHigh(curveName), INTENSITY_MIN, INTENSITY_MAX);
} else if (m_btnHue->isChecked()) {
// Hue
m_dividerLow->setX (m_modelColorFilterAfter->hueLow(curveName), HUE_MIN, HUE_MAX);
m_dividerHigh->setX (m_modelColorFilterAfter->hueHigh(curveName), HUE_MIN, HUE_MAX);
} else if (m_btnSaturation->isChecked()) {
// Saturation
m_dividerLow->setX (m_modelColorFilterAfter->saturationLow(curveName), SATURATION_MIN, SATURATION_MAX);
m_dividerHigh->setX (m_modelColorFilterAfter->saturationHigh(curveName), SATURATION_MIN, SATURATION_MAX);
} else if (m_btnValue->isChecked()) {
// Value
m_dividerLow->setX (m_modelColorFilterAfter->valueLow(curveName), VALUE_MIN, VALUE_MAX);
m_dividerHigh->setX (m_modelColorFilterAfter->valueHigh(curveName), VALUE_MIN, VALUE_MAX);
} else {
ENGAUGE_ASSERT (false);
}
free (histogramBins);
}
void DlgSettingsMainWindow::updateControls ()
{
enableOk (true);
}
void DlgSettingsPointMatch::updateControls()
{
// All controls in this dialog are always fully validated so the ok button is always enabled (after the first change)
enableOk (true);
}