void __init
brcm_setup(void)
{
char *value;
/* Get global SB handle */
sih = si_kattach(SI_OSH);
/* Initialize clocks and interrupts */
si_mips_init(sih, SBMIPS_VIRTIRQ_BASE);
if (BCM330X(current_cpu_data.processor_id) &&
(read_c0_diag() & BRCM_PFC_AVAIL)) {
/*
* Now that the sih is inited set the proper PFC value
*/
printk("Setting the PFC to its default value\n");
enable_pfc(PFC_AUTO);
}
#ifdef CONFIG_SERIAL_CORE
/* Initialize UARTs */
serial_setup(sih);
#endif /* CONFIG_SERIAL_CORE */
/* Override default command line arguments */
value = nvram_get("kernel_args");
if (value && strlen(value) && strncmp(value, "empty", 5))
strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
if ((lanports_enable = getgpiopin(NULL, "lanports_enable", GPIO_PIN_NOTDEFINED)) ==
GPIO_PIN_NOTDEFINED)
lanports_enable = 0;
/* wombo reset */
if ((wombo_reset = getgpiopin(NULL, "wombo_reset", GPIO_PIN_NOTDEFINED)) !=
GPIO_PIN_NOTDEFINED) {
int reset = 1 << wombo_reset;
printk("wombo_reset set to gpio %d\n", wombo_reset);
si_gpioout(sih, reset, 0, GPIO_DRV_PRIORITY);
si_gpioouten(sih, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(10);
si_gpioout(sih, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(20);
}
/* Generic setup */
_machine_restart = bcm947xx_machine_restart;
_machine_halt = bcm947xx_machine_halt;
pm_power_off = bcm947xx_machine_halt;
}
void __init
brcm_setup(void)
{
char *s;
int i;
char *value;
/* Get global SB handle */
sbh = sb_kattach();
/* Initialize clocks and interrupts */
sb_mips_init(sbh, SBMIPS_VIRTIRQ_BASE);
if (BCM330X(current_cpu_data.processor_id) &&
(read_c0_diag() & BRCM_PFC_AVAIL)) {
/*
* Now that the sbh is inited set the proper PFC value
*/
printk("Setting the PFC to its default value\n");
enable_pfc(PFC_AUTO);
}
#ifdef CONFIG_SERIAL
sb_serial_init(sbh, serial_add);
/* reverse serial ports if nvram variable starts with console=ttyS1 */
/* Initialize UARTs */
s = nvram_get("kernel_args");
if (!s) s = "";
if (!strncmp(s, "console=ttyS1", 13)) {
for (i = num_ports; i; i--)
do_serial_add(&ports[i - 1]);
} else {
for (i = 0; i < num_ports; i++)
do_serial_add(&ports[i]);
}
#endif
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
ide_ops = &std_ide_ops;
#endif
/* Override default command line arguments */
value = nvram_get("kernel_cmdline");
if (value && strlen(value) && strncmp(value, "empty", 5))
strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
/* Generic setup */
_machine_restart = bcm947xx_machine_restart;
_machine_halt = bcm947xx_machine_halt;
_machine_power_off = bcm947xx_machine_halt;
board_time_init = bcm947xx_time_init;
board_timer_setup = bcm947xx_timer_setup;
}
void __init
brcm_setup(void)
{
char *value;
/* Get global SB handle */
sih = si_kattach(SI_OSH);
/* Initialize clocks and interrupts */
si_mips_init(sih, SBMIPS_VIRTIRQ_BASE);
if (BCM330X(current_cpu_data.processor_id) &&
(read_c0_diag() & BRCM_PFC_AVAIL)) {
/*
* Now that the sih is inited set the proper PFC value
*/
printk("Setting the PFC to its default value\n");
enable_pfc(PFC_AUTO);
}
#ifdef CONFIG_SERIAL_CORE
/* Initialize UARTs */
serial_setup(sih);
#endif /* CONFIG_SERIAL_CORE */
iswrt350n=1;
iswrt300n11=1;
char *boardtype = nvram_get("boardtype");
char *boothwmodel = nvram_get("boot_hw_model");
char *boothwver = nvram_get("boot_hw_ver");
char *cardbus = nvram_get("cardbus");
if (boardtype==NULL || strcmp(boardtype,"0x478"))iswrt350n=0;
if (cardbus!=NULL && !strcmp(cardbus, "0") && boardtype!=NULL && !strcmp(boardtype,"0x478"))
{
iswrt350n=0;
iswrt300n11=0;
}
if (boothwmodel==NULL || strcmp(boothwmodel,"WRT300N"))iswrt300n11=0;
if (boothwmodel!=NULL && !strcmp(boothwmodel,"WRT610N"))
{
iswrt300n11=0;
iswrt350n=0;
}
if (boothwver==NULL || strcmp(boothwver,"1.1"))iswrt300n11=0;
if (iswrt300n11)
iswrt350n=0;
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
ide_ops = &std_ide_ops;
#endif
sprintf(arcs_cmdline, "root=/dev/mtdblock%d console=ttyS0,115200 init=/sbin/preinit", rootfs_mtdblock());
/* Override default command line arguments */
value = nvram_get("kernel_args");
if (value && strlen(value) && strncmp(value, "empty", 5))
strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
if ((lanports_enable = getgpiopin(NULL, "lanports_enable", GPIO_PIN_NOTDEFINED)) ==
GPIO_PIN_NOTDEFINED)
lanports_enable = 0;
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
/* Check if we want to enable cpu wait */
if (nvram_match("wait", "1"))
cpu_wait_enable = 1;
#endif
/* Generic setup */
_machine_restart = bcm947xx_machine_restart;
_machine_halt = bcm947xx_machine_halt;
pm_power_off = bcm947xx_machine_halt;
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)
board_time_init = bcm947xx_time_init;
#endif
}
