/*
* Go into ``delete mode''. If the
* sequence which goes into delete mode
* is the same as that which goes into insert
* mode, then we are in delete mode already.
*/
void
godm(void)
{
if (insmode) {
if (eq(DM, IM))
return;
endim();
}
vputp(DM, 0);
}
/*
* We need cnt more positions on this line.
* Open up new space on the screen (this may in fact be a
* screen rollup).
*
* On a dumb terminal we may infact redisplay the rest of the
* screen here brute force to keep it pretty.
*/
void
vneedpos(int npcnt)
{
register int d = DEPTH(vcline);
register int rmdr = d * WCOLS - linend;
/*
* Delete the showmode string on wraparound to last line. Cannot use
* vclrech() since the mode string is printed on the echo area, but
* not actually a part of it.
*/
if (value(SHOWMODE) && (value(REDRAW) || (IM && EI)) &&
npcnt == rmdr - IN && LINE(vcline) + d == WECHO) {
int sdc, sdl;
char *ocurs;
endim();
sdc = destcol, sdl = destline, ocurs = cursor;
splitw++;
vgoto(WECHO, 0);
if (CD) {
vputp(CD, 1);
} else if (CE) {
vputp(CE, 1);
} else {
int i;
for (i = 1; i < WCOLS; i++)
vputchar(' ');
}
destcol = sdc, destline = sdl; cursor = ocurs;
splitw = 0;
}
if (npcnt <= rmdr - IN)
return;
endim();
vnpins(1);
}
/*
* Rigidify the rest of the line after the first
* group of following tabs, typing blanks over ``spaces''.
*/
void
vrigid(void)
{
register int col;
register cell *tp = vtube0 + tabend;
for (col = tabend; col < linend; col++) {
if ((*tp++ & TRIM) == 0) {
endim();
vgotoCL(col);
vputchar(' ' | QUOTE);
}
}
}
/*
* Something weird just happened and we
* lost track of whats happening out there.
* Since we cant, in general, read where we are
* we just reset to some known state.
* On cursor addressible terminals setting to unknown
* will force a cursor address soon.
*/
void
termreset(void)
{
endim();
if (TI) /* otherwise it flushes anyway, and 'set tty=dumb' vomits */
putpad(TI); /*adb change -- emit terminal initial sequence */
destcol = 0;
destline = TLINES - 1;
if (CA) {
outcol = UKCOL;
outline = UKCOL;
} else {
outcol = destcol;
outline = destline;
}
}
void
lsmatch(char *cp)
{
char *save = smalloc(LBSIZE);
register char *sp = save;
register char *scurs = cursor;
wcursor = cp;
lcpy(sp, linebuf, LBSIZE);
*wcursor = 0;
strcpy(cursor, genbuf);
cursor = strend(linebuf) - 1;
if (lmatchp(dot - vcline)) {
register int i = insmode;
register int c = outcol;
register int l = outline;
if (!MI)
endim();
vgoto(splitw ? WECHO : LINE(wdot - llimit), column(wcursor) - 1);
flush();
sleep(1);
vgoto(l, c);
if (i)
goim();
}
else {
strcLIN(sp);
strcpy(scurs, genbuf);
if (!lmatchp((line *) 0))
beep();
}
strcLIN(sp);
wdot = 0;
wcursor = 0;
cursor = scurs;
free(save);
}
/*
* Get a line into genbuf after gcursor.
* Cnt limits the number of input characters
* accepted and is used for handling the replace
* single character command. Aescaped is the location
* where we stick a termination indicator (whether we
* ended with an ESCAPE or a newline/return.
*
* We do erase-kill type processing here and also
* are careful about the way we do this so that it is
* repeatable. (I.e. so that your kill doesn't happen,
* when you repeat an insert if it was escaped with \ the
* first time you did it.
*/
char *
vgetline(int cnt, char *gcursor, bool *aescaped)
{
register int c, ch;
register char *cp;
int x, y, iwhite;
char *iglobp;
void (*OO)() = Outchar;
/*
* Clear the output state and counters
* for autoindent backwards motion (counts of ^D, etc.)
* Remember how much white space at beginning of line so
* as not to allow backspace over autoindent.
*/
*aescaped = 0;
ogcursor = gcursor;
flusho();
CDCNT = 0;
HADUP = 0;
HADZERO = 0;
gobbled = 0;
iwhite = whitecnt(genbuf);
iglobp = vglobp;
/*
* Carefully avoid using vinschar in the echo area.
*/
if (splitw)
Outchar = vputchar;
else {
Outchar = vinschar;
vprepins();
}
for (;;) {
if (gobblebl)
gobblebl--;
if (cnt != 0) {
cnt--;
if (cnt == 0)
goto vadone;
}
ch = c = getkey() & (QUOTE|TRIM);
if (!iglobp) {
/*
* Erase-kill type processing.
* Only happens if we were not reading
* from untyped input when we started.
* Map users erase to ^H, kill to -1 for switch.
*/
if (c == tty.c_cc[VERASE])
c = CTRL('h');
else if (c == tty.c_cc[VKILL])
c = -1;
switch (c) {
/*
* ^? Interrupt drops you back to visual
* command mode with an unread interrupt
* still in the input buffer.
*
* ^\ Quit does the same as interrupt.
* If you are a ex command rather than
* a vi command this will drop you
* back to command mode for sure.
*/
case ATTN:
case QUIT:
ungetkey(c);
goto vadone;
/*
* ^H Backs up a character in the input.
*
* BUG: Can't back around line boundaries.
* This is hard because stuff has
* already been saved for repeat.
*/
case CTRL('h'):
bakchar:
cp = gcursor - 1;
if (cp < ogcursor) {
beep();
continue;
}
goto vbackup;
/*
* ^W Back up a white/non-white word.
*/
case CTRL('w'):
wdkind = 1;
for (cp = gcursor; cp > ogcursor && isspace((int)cp[-1]); cp--)
continue;
for (c = wordch(cp - 1); cp > ogcursor && wordof(c, cp - 1); cp--)
continue;
goto vbackup;
/*
* users kill Kill input on this line, back to
* the autoindent.
*/
case -1:
cp = ogcursor;
vbackup:
if (cp == gcursor) {
beep();
continue;
}
endim();
*cp = 0;
c = cindent();
vgotoCL(qcolumn(cursor - 1, genbuf));
if (doomed >= 0)
doomed += c - cindent();
gcursor = cp;
continue;
/*
* \ Followed by erase or kill
* maps to just the erase or kill.
*/
case '\\':
x = destcol, y = destline;
ex_putchar('\\');
vcsync();
c = getkey();
if (c == tty.c_cc[VERASE]
|| c == tty.c_cc[VKILL]) {
vgoto(y, x);
if (doomed >= 0)
doomed++;
goto def;
}
ungetkey(c), c = '\\';
goto noput;
/*
* ^Q Super quote following character
* Only ^@ is verboten (trapped at
* a lower level) and \n forces a line
* split so doesn't really go in.
*
* ^V Synonym for ^Q
*/
case CTRL('q'):
case CTRL('v'):
x = destcol, y = destline;
ex_putchar('^');
vgoto(y, x);
c = getkey();
if (c != NL) {
if (doomed >= 0)
doomed++;
goto def;
}
break;
}
}
/*
* If we get a blank not in the echo area
* consider splitting the window in the wrapmargin.
*/
if (c == ' ' && !splitw) {
if (gobblebl) {
gobbled = 1;
continue;
}
if (value(WRAPMARGIN) && outcol >= WCOLS - value(WRAPMARGIN)) {
c = NL;
gobblebl = 2;
}
}
switch (c) {
/*
* ^M Except in repeat maps to \n.
*/
case CR:
if (vglobp)
goto def;
c = '\n';
/* presto chango ... */
/*
* \n Start new line.
*/
case NL:
*aescaped = c;
goto vadone;
/*
* escape End insert unless repeat and more to repeat.
*/
case ESCAPE:
if (vglobp && *vglobp)
goto def;
goto vadone;
/*
* ^D Backtab.
* ^T Software forward tab.
*
* Unless in repeat where this means these
* were superquoted in.
*/
case CTRL('d'):
case CTRL('t'):
if (vglobp)
goto def;
/* fall into ... */
/*
* ^D|QUOTE Is a backtab (in a repeated command).
*/
case CTRL('d') | QUOTE:
*gcursor = 0;
cp = vpastwh(genbuf);
c = whitecnt(genbuf);
if (ch == CTRL('t')) {
/*
* ^t just generates new indent replacing
* current white space rounded up to soft
* tab stop increment.
*/
if (cp != gcursor)
/*
* BUG: Don't hack ^T except
* right after initial
* white space.
*/
continue;
cp = genindent(iwhite = backtab(c + value(SHIFTWIDTH) + 1));
ogcursor = cp;
goto vbackup;
}
/*
* ^D works only if we are at the (end of) the
* generated autoindent. We count the ^D for repeat
* purposes.
*/
if (c == iwhite && c != 0) {
if (cp == gcursor) {
iwhite = backtab(c);
CDCNT++;
ogcursor = cp = genindent(iwhite);
goto vbackup;
} else if (&cp[1] == gcursor &&
(*cp == '^' || *cp == '0')) {
/*
* ^^D moves to margin, then back
* to current indent on next line.
*
* 0^D moves to margin and then
* stays there.
*/
HADZERO = *cp == '0';
ogcursor = cp = genbuf;
HADUP = 1 - HADZERO;
CDCNT = 1;
endim();
back1();
vputc(' ');
goto vbackup;
}
}
if (vglobp && vglobp - iglobp >= 2 &&
(vglobp[-2] == '^' || vglobp[-2] == '0')
&& gcursor == ogcursor + 1)
goto bakchar;
continue;
default:
/*
* Possibly discard control inputs.
*/
if (!vglobp && junk(c)) {
beep();
continue;
}
def:
ex_putchar(c);
noput:
if (gcursor > &genbuf[LBSIZE - 2])
error("Line too long");
*gcursor++ = c & TRIM;
vcsync();
#ifdef LISP
if (value(SHOWMATCH) && !iglobp)
if (c == ')' || c == '}')
lsmatch(gcursor);
#endif
continue;
}
}
vadone:
*gcursor = 0;
Outchar = OO;
endim();
return (gcursor);
}
void
vappend(int ch, int cnt, int indent)
{
register int i;
register char *gcursor;
bool escape;
int repcnt;
short oldhold = hold;
/*
* Before a move in hardopen when the line is dirty
* or we are in the middle of the printed representation,
* we retype the line to the left of the cursor so the
* insert looks clean.
*/
if (ch != 'o' && state == HARDOPEN && (rubble || !ateopr())) {
rubble = 1;
wcursor = cursor;
vmove();
}
vaifirst = indent == 0;
/*
* Handle replace character by (eventually)
* limiting the number of input characters allowed
* in the vgetline routine.
*/
if (ch == 'r')
repcnt = 2;
else
repcnt = 0;
/*
* If an autoindent is specified, then
* generate a mixture of blanks to tabs to implement
* it and place the cursor after the indent.
* Text read by the vgetline routine will be placed in genbuf,
* so the indent is generated there.
*/
if (value(AUTOINDENT) && indent != 0) {
gcursor = genindent(indent);
*gcursor = 0;
vgotoCL(qcolumn(cursor - 1, genbuf));
} else {
gcursor = genbuf;
*gcursor = 0;
if (ch == 'o')
vfixcurs();
}
/*
* Prepare for undo. Pointers delimit inserted portion of line.
*/
vUA1 = vUA2 = cursor;
/*
* If we are not in a repeated command and a ^@ comes in
* then this means the previous inserted text.
* If there is none or it was too long to be saved,
* then beep() and also arrange to undo any damage done
* so far (e.g. if we are a change.)
*/
if ((vglobp && *vglobp == 0) || peekbr()) {
if ((INS[0] & (OVERBUF|TRIM)) == OVERBUF) {
beep();
if (!splitw)
ungetkey('u');
doomed = 0;
hold = oldhold;
return;
}
/*
* Unread input from INS.
* An escape will be generated at end of string.
* Hold off n^^2 type update on dumb terminals.
*/
vglobp = INS;
hold |= HOLDQIK;
} else if (vglobp == 0)
/*
* Not a repeated command, get
* a new inserted text for repeat.
*/
INS[0] = 0;
/*
* For wrapmargin to hack away second space after a '.'
* when the first space caused a line break we keep
* track that this happened in gobblebl, which says
* to gobble up a blank silently.
*/
gobblebl = 0;
/*
* Text gathering loop.
* New text goes into genbuf starting at gcursor.
* cursor preserves place in linebuf where text will eventually go.
*/
if (*cursor == 0 || state == CRTOPEN)
hold |= HOLDROL;
for (;;) {
if (ch == 'r' && repcnt == 0)
escape = 0;
else {
gcursor = vgetline(repcnt, gcursor, &escape);
/*
* After an append, stick information
* about the ^D's and ^^D's and 0^D's in
* the repeated text buffer so repeated
* inserts of stuff indented with ^D as backtab's
* can work.
*/
if (HADUP)
addtext("^");
else if (HADZERO)
addtext("0");
while (CDCNT > 0)
addtext("\204"), CDCNT--;
if (gobbled)
addtext(" ");
addtext(ogcursor);
}
repcnt = 0;
/*
* Smash the generated and preexisting indents together
* and generate one cleanly made out of tabs and spaces
* if we are using autoindent.
*/
if (!vaifirst && value(AUTOINDENT)) {
i = fixindent(indent);
if (!HADUP)
indent = i;
gcursor = strend(genbuf);
}
/*
* Limit the repetition count based on maximum
* possible line length; do output implied
* by further count (> 1) and cons up the new line
* in linebuf.
*/
cnt = vmaxrep(ch, cnt);
CP(gcursor + 1, cursor);
do {
CP(cursor, genbuf);
if (cnt > 1) {
int oldhold = hold;
Outchar = vinschar;
hold |= HOLDQIK;
ex_printf("%s", genbuf);
hold = oldhold;
Outchar = vputchar;
}
cursor += gcursor - genbuf;
} while (--cnt > 0);
endim();
vUA2 = cursor;
if (escape != '\n')
CP(cursor, gcursor + 1);
/*
* If doomed characters remain, clobber them,
* and reopen the line to get the display exact.
*/
if (state != HARDOPEN) {
DEPTH(vcline) = 0;
if (doomed > 0) {
register int cind = cindent();
physdc(cind, cind + doomed);
doomed = 0;
}
i = vreopen(LINE(vcline), lineDOT(), vcline);
}
/*
* All done unless we are continuing on to another line.
*/
if (escape != '\n')
break;
/*
* Set up for the new line.
* First save the current line, then construct a new
* first image for the continuation line consisting
* of any new autoindent plus the pushed ahead text.
*/
killU();
addtext(gobblebl ? " " : "\n");
vsave();
cnt = 1;
if (value(AUTOINDENT)) {
#ifdef LISP
if (value(LISP))
indent = lindent(dot + 1);
else
#endif
if (!HADUP && vaifirst)
indent = whitecnt(linebuf);
vaifirst = 0;
strcLIN(vpastwh(gcursor + 1));
gcursor = genindent(indent);
*gcursor = 0;
if (gcursor + strlen(linebuf) > &genbuf[LBSIZE - 2])
gcursor = genbuf;
CP(gcursor, linebuf);
} else {
CP(genbuf, gcursor + 1);
gcursor = genbuf;
}
/*
* If we started out as a single line operation and are now
* turning into a multi-line change, then we had better yank
* out dot before it changes so that undo will work
* correctly later.
*/
if (vundkind == VCHNG) {
vremote(1, (void (*)(int))yank, 0);
undap1--;
}
/*
* Now do the append of the new line in the buffer,
* and update the display. If slowopen
* we don't do very much.
*/
vdoappend(genbuf);
vundkind = VMANYINS;
vcline++;
if (state != VISUAL)
vshow(dot, NOLINE);
else {
i += LINE(vcline - 1);
vopen(dot, i);
if (value(SLOWOPEN))
vscrap();
else
vsync1(LINE(vcline));
}
strcLIN(gcursor);
*gcursor = 0;
cursor = linebuf;
vgotoCL(qcolumn(cursor - 1, genbuf));
}
/*
* All done with insertion, position the cursor
* and sync the screen.
*/
hold = oldhold;
if (cursor > linebuf)
cursor--;
if (state != HARDOPEN)
vsyncCL();
else if (cursor > linebuf)
back1();
doomed = 0;
wcursor = cursor;
vmove();
}
/*
* Get a line into genbuf after gcursor.
* Cnt limits the number of input characters
* accepted and is used for handling the replace
* single character command. Aescaped is the location
* where we stick a termination indicator (whether we
* ended with an ESCAPE or a newline/return.
*
* We do erase-kill type processing here and also
* are careful about the way we do this so that it is
* repeatable. (I.e. so that your kill doesn't happen,
* when you repeat an insert if it was escaped with \ the
* first time you did it. commch is the command character
* involved, including the prompt for readline.
*/
char *
vgetline(int cnt, char *gcursor, bool *aescaped, int commch)
{
register int c, ch;
register char *cp;
int x, y, iwhite, backsl=0;
cell *iglobp;
char cstr[2];
int (*OO)(int) = Outchar;
/*
* Clear the output state and counters
* for autoindent backwards motion (counts of ^D, etc.)
* Remember how much white space at beginning of line so
* as not to allow backspace over autoindent.
*/
*aescaped = 0;
ogcursor = gcursor;
flusho();
CDCNT = 0;
HADUP = 0;
HADZERO = 0;
gobbled = 0;
iwhite = whitecnt(genbuf);
iglobp = vglobp;
/*
* Carefully avoid using vinschar in the echo area.
*/
if (splitw)
Outchar = vputchar;
else {
Outchar = vinschar;
vprepins();
}
for (;;) {
backsl = 0;
if (gobblebl)
gobblebl--;
if (cnt != 0) {
cnt--;
if (cnt == 0)
goto vadone;
}
c = getkey();
if (c != ATTN)
c &= (QUOTE|TRIM);
ch = c;
maphopcnt = 0;
if (vglobp == 0 && Peekkey == 0 && commch != 'r')
while ((ch = map(c, immacs)) != c) {
c = ch;
if (!value(REMAP))
break;
if (++maphopcnt > 256)
error(catgets(catd, 1, 234,
"Infinite macro loop"));
}
if (!iglobp) {
/*
* Erase-kill type processing.
* Only happens if we were not reading
* from untyped input when we started.
* Map users erase to ^H, kill to -1 for switch.
*/
if (c == tty.c_cc[VERASE])
c = CTRL('h');
else if (c == tty.c_cc[VKILL])
c = -1;
if (c == ATTN)
goto case_ATTN;
switch (c) {
/*
* ^? Interrupt drops you back to visual
* command mode with an unread interrupt
* still in the input buffer.
*
* ^\ Quit does the same as interrupt.
* If you are a ex command rather than
* a vi command this will drop you
* back to command mode for sure.
*/
case QUIT:
case_ATTN:
ungetkey(c);
goto vadone;
/*
* ^H Backs up a character in the input.
*
* BUG: Can't back around line boundaries.
* This is hard because stuff has
* already been saved for repeat.
*/
case CTRL('h'):
bakchar:
cp = gcursor + skipleft(ogcursor, gcursor);
if (cp < ogcursor) {
if (splitw) {
/*
* Backspacing over readecho
* prompt. Pretend delete but
* don't beep.
*/
ungetkey(c);
goto vadone;
}
beep();
continue;
}
goto vbackup;
/*
* ^W Back up a white/non-white word.
*/
case CTRL('w'):
wdkind = 1;
for (cp = gcursor; cp > ogcursor
&& isspace(cp[-1]&0377); cp--)
continue;
for (c = wordch(cp - 1);
cp > ogcursor && wordof(c, cp - 1); cp--)
continue;
goto vbackup;
/*
* users kill Kill input on this line, back to
* the autoindent.
*/
case -1:
cp = ogcursor;
vbackup:
if (cp == gcursor) {
beep();
continue;
}
endim();
*cp = 0;
c = cindent();
vgotoCL(qcolumn(cursor +
skipleft(linebuf, cursor), genbuf));
if (doomed >= 0)
doomed += c - cindent();
gcursor = cp;
continue;
/*
* \ Followed by erase or kill
* maps to just the erase or kill.
*/
case '\\':
x = destcol, y = destline;
putchar('\\');
vcsync();
c = getkey();
if (c == tty.c_cc[VERASE]
|| c == tty.c_cc[VKILL])
{
vgoto(y, x);
if (doomed >= 0)
doomed++;
goto def;
}
ungetkey(c), c = '\\';
backsl = 1;
break;
/*
* ^Q Super quote following character
* Only ^@ is verboten (trapped at
* a lower level) and \n forces a line
* split so doesn't really go in.
*
* ^V Synonym for ^Q
*/
case CTRL('q'):
case CTRL('v'):
x = destcol, y = destline;
putchar('^');
vgoto(y, x);
c = getkey();
if (c != NL) {
if (doomed >= 0)
doomed++;
goto def;
}
break;
}
}
/*
* If we get a blank not in the echo area
* consider splitting the window in the wrapmargin.
*/
if (c != NL && !splitw) {
if (c == ' ' && gobblebl) {
gobbled = 1;
continue;
}
if (value(WRAPMARGIN) &&
(outcol >= OCOLUMNS - value(WRAPMARGIN) ||
(backsl && outcol == 0)) &&
commch != 'r') {
/*
* At end of word and hit wrapmargin.
* Move the word to next line and keep going.
*/
wdkind = 1;
gappend(c);
if (backsl)
gappend(getkey());
*gcursor = 0;
/*
* Find end of previous word if we are past it.
*/
for (cp=gcursor; cp>ogcursor
&& isspace(cp[-1]&0377); cp--)
;
if (outcol+(backsl?OCOLUMNS:0) - (gcursor-cp) >= OCOLUMNS - value(WRAPMARGIN)) {
/*
* Find beginning of previous word.
*/
for (; cp>ogcursor && !isspace(cp[-1]&0377); cp--)
;
if (cp <= ogcursor) {
/*
* There is a single word that
* is too long to fit. Just
* let it pass, but beep for
* each new letter to warn
* the luser.
*/
c = *--gcursor;
*gcursor = 0;
beep();
goto dontbreak;
}
/*
* Save it for next line.
*/
macpush(cp, 0);
cp--;
}
macpush("\n", 0);
/*
* Erase white space before the word.
*/
while (cp > ogcursor && isspace(cp[-1]&0377))
cp--; /* skip blank */
gobblebl = 3;
goto vbackup;
}
dontbreak:;
}
/*
* Word abbreviation mode.
*/
cstr[0] = c;
if (anyabbrs && gcursor > ogcursor && !wordch(cstr) && wordch(gcursor-1)) {
int wdtype, abno;
cstr[1] = 0;
wdkind = 1;
cp = gcursor + skipleft(ogcursor, gcursor);
for (wdtype = wordch(cp - 1);
cp > ogcursor && wordof(wdtype, cp - 1); cp--)
;
*gcursor = 0;
for (abno=0; abbrevs[abno].mapto; abno++) {
if (!abbrevs[abno].hadthis &&
eq(cp, abbrevs[abno].cap)) {
abbrevs[abno].hadthis++;
macpush(cstr, 0);
macpush(abbrevs[abno].mapto, 0);
goto vbackup;
}
}
}
#ifdef BIT8
if (c == OVERBUF)
goto btrp;
#endif
switch (c) {
/*
* ^M Except in repeat maps to \n.
*/
case CR:
if (vglobp)
goto def;
c = '\n';
/* presto chango ... */
/*
* \n Start new line.
*/
case NL:
*aescaped = c;
goto vadone;
/*
* escape End insert unless repeat and more to repeat.
*/
case ESCAPE:
if (lastvgk)
goto def;
goto vadone;
/*
* ^D Backtab.
* ^T Software forward tab.
*
* Unless in repeat where this means these
* were superquoted in.
*/
case CTRL('d'):
case CTRL('t'):
if (vglobp)
goto def;
/* fall into ... */
/*
* ^D|QUOTE Is a backtab (in a repeated command).
*/
#ifndef BIT8
case CTRL('d') | QUOTE:
#else
btrp:
#endif
*gcursor = 0;
cp = vpastwh(genbuf);
c = whitecnt(genbuf);
if (ch == CTRL('t')) {
/*
* ^t just generates new indent replacing
* current white space rounded up to soft
* tab stop increment.
*/
if (cp != gcursor)
/*
* BUG: Don't hack ^T except
* right after initial
* white space.
*/
continue;
cp = genindent(iwhite = backtab(c + value(SHIFTWIDTH) + 1));
ogcursor = cp;
goto vbackup;
}
/*
* ^D works only if we are at the (end of) the
* generated autoindent. We count the ^D for repeat
* purposes.
*/
if (c == iwhite && c != 0) {
if (cp == gcursor) {
iwhite = backtab(c);
CDCNT++;
ogcursor = cp = genindent(iwhite);
goto vbackup;
} else if (&cp[1] == gcursor &&
(*cp == '^' || *cp == '0')) {
/*
* ^^D moves to margin, then back
* to current indent on next line.
*
* 0^D moves to margin and then
* stays there.
*/
HADZERO = *cp == '0';
ogcursor = cp = genbuf;
HADUP = 1 - HADZERO;
CDCNT = 1;
endim();
back1();
vputchar(' ');
goto vbackup;
}
}
if (vglobp && vglobp - iglobp >= 2 &&
(vglobp[-2] == '^' || vglobp[-2] == '0')
&& gcursor == ogcursor + 1)
goto bakchar;
continue;
default:
/*
* Possibly discard control inputs.
*/
if (!vglobp && junk(c)) {
beep();
continue;
}
def:
if (!backsl) {
/* int cnt; */
putchar(c);
flush();
}
if (gcursor > &genbuf[LBSIZE - 2])
error(catgets(catd, 1, 235, "Line too long"));
gappend(c & TRIM);
vcsync();
if (value(SHOWMATCH) && !iglobp)
if (c == ')' || c == '}')
lsmatch(gcursor);
continue;
}
}
vadone:
*gcursor = 0;
if (Outchar != termchar)
Outchar = OO;
endim();
return (gcursor);
}
void
vundo (
int show /* if true update the screen */
)
{
register int cnt;
register line *addr;
register char *cp;
char *temp = smalloc(LBSIZE);
bool savenote;
int (*OO)(int);
short oldhold = hold;
switch (vundkind) {
case VMANYINS:
wcursor = 0;
addr1 = undap1;
addr2 = undap2 - 1;
vsave();
YANKreg('1');
notecnt = 0;
/* fall into ... */
case VMANY:
case VMCHNG:
vsave();
addr = dot - vcline;
notecnt = 1;
if (undkind == UNDPUT && undap1 == undap2) {
beep();
break;
}
/*
* Undo() call below basically replaces undap1 to undap2-1
* with dol through unddol-1. Hack screen image to
* reflect this replacement.
*/
if (show)
if (undkind == UNDMOVE)
vdirty(0, TLINES);
else
vreplace(undap1 - addr, undap2 - undap1,
undkind == UNDPUT ? 0 : unddol - dol);
savenote = notecnt;
undo(1);
if (show && (vundkind != VMCHNG || addr != dot))
killU();
vundkind = VMANY;
cnt = dot - addr;
if (cnt < 0 || cnt > vcnt || state != VISUAL) {
if (show)
vjumpto(dot, NOSTR, '.');
break;
}
if (!savenote)
notecnt = 0;
if (show) {
vcline = cnt;
vrepaint(vmcurs);
}
vmcurs = 0;
break;
case VCHNG:
case VCAPU:
vundkind = VCHNG;
CP(temp, vutmp);
CP(vutmp, linebuf);
doomed = column(vUA2 - 1) - column(vUA1 - 1);
strcLIN(temp);
cp = vUA1; vUA1 = vUD1; vUD1 = cp;
cp = vUA2; vUA2 = vUD2; vUD2 = cp;
if (!show)
break;
cursor = vUD1;
if (state == HARDOPEN) {
doomed = 0;
vsave();
vopen(dot, WBOT);
vnline(cursor);
break;
}
/*
* Pseudo insert command.
*/
vcursat(cursor);
OO = Outchar; Outchar = vinschar; hold |= HOLDQIK;
vprepins();
temp[vUA2 - linebuf] = 0;
for (cp = &temp[vUA1 - linebuf]; *cp;) {
int c, n;
nextc(c, cp, n);
cp += n;
putchar(c);
}
Outchar = OO; hold = oldhold;
endim();
physdc(cindent(), cindent() + doomed);
doomed = 0;
vdirty(vcline, 1);
vsyncCL();
if (cursor > linebuf && cursor >= strend(linebuf))
cursor += skipleft(linebuf, cursor);
vfixcurs();
break;
case VNONE:
beep();
break;
}
free(temp);
}
void
vappend(int ch, int cnt, int indent)
{
int i;
unsigned char *gcursor;
bool escape;
int repcnt, savedoomed;
short oldhold = hold;
int savecnt = cnt;
line *startsrcline;
int startsrccol, endsrccol;
int gotNL = 0;
int imultlinecnt = 0;
int omultlinecnt = 0;
if ((savecnt > 1) && (ch == 'o' || ch == 'O')) {
omultlinecnt = 1;
}
#ifdef XPG6
if ((savecnt > 1) && (ch == 'a' || ch == 'A' || ch == 'i' || ch == 'I'))
imultlinecnt = 1;
#endif /* XPG6 */
/*
* Before a move in hardopen when the line is dirty
* or we are in the middle of the printed representation,
* we retype the line to the left of the cursor so the
* insert looks clean.
*/
if (ch != 'o' && state == HARDOPEN && (rubble || !ateopr())) {
rubble = 1;
gcursor = cursor;
i = *gcursor;
*gcursor = ' ';
wcursor = gcursor;
(void) vmove();
*gcursor = i;
}
/*
* If vrep() passed indent = 0, this is the 'r' command,
* so don't autoindent until the last char.
*/
vaifirst = indent == 0;
/*
* Handle replace character by (eventually)
* limiting the number of input characters allowed
* in the vgetline routine.
*/
if (ch == 'r')
repcnt = 2;
else
repcnt = 0;
/*
* If an autoindent is specified, then
* generate a mixture of blanks to tabs to implement
* it and place the cursor after the indent.
* Text read by the vgetline routine will be placed in genbuf,
* so the indent is generated there.
*/
if (value(vi_AUTOINDENT) && indent != 0) {
unsigned char x;
gcursor = genindent(indent);
*gcursor = 0;
vgotoCL(nqcolumn(lastchr(linebuf, cursor), genbuf));
} else {
gcursor = genbuf;
*gcursor = 0;
if (ch == 'o')
vfixcurs();
}
/*
* Prepare for undo. Pointers delimit inserted portion of line.
*/
vUA1 = vUA2 = cursor;
/*
* If we are not in a repeated command and a ^@ comes in
* then this means the previous inserted text.
* If there is none or it was too long to be saved,
* then beep() and also arrange to undo any damage done
* so far (e.g. if we are a change.)
*/
switch (ch) {
case 'r':
break;
case 'a':
/*
* TRANSLATION_NOTE
* "A" is a terse mode message corresponding to
* "APPEND MODE".
* Translated message of "A" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("A"));
} else {
vshowmode(gettext("APPEND MODE"));
}
break;
case 's':
/*
* TRANSLATION_NOTE
* "S" is a terse mode message corresponding to
* "SUBSTITUTE MODE".
* Translated message of "S" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("S"));
} else {
vshowmode(gettext("SUBSTITUTE MODE"));
}
break;
case 'c':
/*
* TRANSLATION_NOTE
* "C" is a terse mode message corresponding to
* "CHANGE MODE".
* Translated message of "C" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("C"));
} else {
vshowmode(gettext("CHANGE MODE"));
}
break;
case 'R':
/*
* TRANSLATION_NOTE
* "R" is a terse mode message corresponding to
* "REPLACE MODE".
* Translated message of "R" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("R"));
} else {
vshowmode(gettext("REPLACE MODE"));
}
break;
case 'o':
/*
* TRANSLATION_NOTE
* "O" is a terse mode message corresponding to
* "OPEN MODE".
* Translated message of "O" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("O"));
} else {
vshowmode(gettext("OPEN MODE"));
}
break;
case 'i':
/*
* TRANSLATION_NOTE
* "I" is a terse mode message corresponding to
* "INSERT MODE" and the following "INPUT MODE".
* Translated message of "I" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INSERT MODE"));
}
break;
default:
/*
* TRANSLATION_NOTE
* "I" is a terse mode message corresponding to
* "INPUT MODE" and the previous "INSERT MODE".
* Translated message of "I" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INPUT MODE"));
}
}
ixlatctl(1);
if ((vglobp && *vglobp == 0) || peekbr()) {
if (INS[128] == 0200) {
(void) beep();
if (!splitw)
ungetkey('u');
doomed = 0;
hold = oldhold;
return;
}
/*
* Unread input from INS.
* An escape will be generated at end of string.
* Hold off n^^2 type update on dumb terminals.
*/
vglobp = INS;
inscdcnt = INSCDCNT;
hold |= HOLDQIK;
} else if (vglobp == 0) {
/*
* Not a repeated command, get
* a new inserted text for repeat.
*/
INS[0] = 0;
INS[128] = 0;
INSCDCNT = 0;
}
/*
* For wrapmargin to hack away second space after a '.'
* when the first space caused a line break we keep
* track that this happened in gobblebl, which says
* to gobble up a blank silently.
*/
gobblebl = 0;
startsrcline = dot;
startsrccol = cursor - linebuf;
/*
* Text gathering loop.
* New text goes into genbuf starting at gcursor.
* cursor preserves place in linebuf where text will eventually go.
*/
if (*cursor == 0 || state == CRTOPEN)
hold |= HOLDROL;
for (;;) {
if (ch == 'r' && repcnt == 0)
escape = 0;
else {
ixlatctl(1);
/*
* When vgetline() returns, gcursor is
* pointing to '\0' and vgetline() has
* read an ESCAPE or NL.
*/
gcursor = vgetline(repcnt, gcursor, &escape, ch);
if (escape == '\n') {
gotNL = 1;
#ifdef XPG6
if (ch == 'r') {
/*
* XPG6 assertion 313 [count]r\n :
* Arrange to set cursor correctly.
*/
endsrccol = gcursor - genbuf - 1;
}
#endif /* XPG6 */
} else {
/*
* Upon escape, gcursor is pointing to '\0'
* terminating the string in genbuf.
*/
endsrccol = gcursor - genbuf - 1;
}
ixlatctl(0);
/*
* After an append, stick information
* about the ^D's and ^^D's and 0^D's in
* the repeated text buffer so repeated
* inserts of stuff indented with ^D as backtab's
* can work.
*/
if (HADUP)
addtext("^");
else if (HADZERO)
addtext("0");
if(!vglobp)
INSCDCNT = CDCNT;
while (CDCNT > 0) {
addtext("\004");
CDCNT--;
}
if (gobbled)
addtext(" ");
addtext(ogcursor);
}
repcnt = 0;
/*
* Smash the generated and preexisting indents together
* and generate one cleanly made out of tabs and spaces
* if we are using autoindent and this isn't 'r' command.
*/
if (!vaifirst && value(vi_AUTOINDENT)) {
i = fixindent(indent);
if (!HADUP)
indent = i;
gcursor = strend(genbuf);
}
/*
* Set cnt to 1 to avoid repeating the text on the same line.
* Do this for commands 'i', 'I', 'a', and 'A', if we're
* inserting anything with a newline for XPG6. Always do this
* for commands 'o' and 'O'.
*/
if ((imultlinecnt && gotNL) || omultlinecnt) {
cnt = 1;
}
/*
* Limit the repetition count based on maximum
* possible line length; do output implied
* by further count (> 1) and cons up the new line
* in linebuf.
*/
cnt = vmaxrep(ch, cnt);
/*
* cursor points to linebuf
* Copy remaining old text (cursor) in original
* line to after new text (gcursor + 1) in genbuf.
*/
CP(gcursor + 1, cursor);
/*
* For [count] r \n command, when replacing [count] chars
* with '\n', this loop replaces [count] chars with "".
*/
do {
/* cp new text (genbuf) into linebuf (cursor) */
CP(cursor, genbuf);
if (cnt > 1) {
int oldhold = hold;
Outchar = vinschar;
hold |= HOLDQIK;
viprintf("%s", genbuf);
hold = oldhold;
Outchar = vputchar;
}
/* point cursor after new text in linebuf */
cursor += gcursor - genbuf;
} while (--cnt > 0);
endim();
vUA2 = cursor;
/* add the remaining old text after the cursor */
if (escape != '\n')
CP(cursor, gcursor + 1);
/*
* If doomed characters remain, clobber them,
* and reopen the line to get the display exact.
* eg. c$ to change to end of line
*/
if (state != HARDOPEN) {
DEPTH(vcline) = 0;
savedoomed = doomed;
if (doomed > 0) {
int cind = cindent();
physdc(cind, cind + doomed);
doomed = 0;
}
if(MB_CUR_MAX > 1)
rewrite = _ON;
i = vreopen(LINE(vcline), lineDOT(), vcline);
if(MB_CUR_MAX > 1)
rewrite = _OFF;
#ifdef TRACE
if (trace)
fprintf(trace, "restoring doomed from %d to %d\n", doomed, savedoomed);
#endif
if (ch == 'R')
doomed = savedoomed;
}
/*
* Unless we are continuing on to another line
* (got a NL), break out of the for loop (got
* an ESCAPE).
*/
if (escape != '\n') {
vshowmode("");
break;
}
/*
* Set up for the new line.
* First save the current line, then construct a new
* first image for the continuation line consisting
* of any new autoindent plus the pushed ahead text.
*/
killU();
addtext(gobblebl ? " " : "\n");
/* save vutmp (for undo state) into temp file */
vsave();
cnt = 1;
if (value(vi_AUTOINDENT)) {
if (value(vi_LISP))
indent = lindent(dot + 1);
else
if (!HADUP && vaifirst)
indent = whitecnt(linebuf);
vaifirst = 0;
strcLIN(vpastwh(gcursor + 1));
gcursor = genindent(indent);
*gcursor = 0;
if (gcursor + strlen(linebuf) > &genbuf[LBSIZE - 2])
gcursor = genbuf;
CP(gcursor, linebuf);
} else {
/*
* Put gcursor at start of genbuf to wipe
* out previous line in preparation for
* the next vgetline() loop.
*/
CP(genbuf, gcursor + 1);
gcursor = genbuf;
}
/*
* If we started out as a single line operation and are now
* turning into a multi-line change, then we had better yank
* out dot before it changes so that undo will work
* correctly later.
*/
if (FIXUNDO && vundkind == VCHNG) {
vremote(1, yank, 0);
undap1--;
}
/*
* Now do the append of the new line in the buffer,
* and update the display, ie: append genbuf to
* the file after dot. If slowopen
* we don't do very much.
*/
vdoappend(genbuf);
vundkind = VMANYINS;
vcline++;
if (state != VISUAL)
vshow(dot, NOLINE);
else {
i += LINE(vcline - 1);
vopen(dot, i);
if (value(vi_SLOWOPEN))
vscrap();
else
vsync1(LINE(vcline));
}
switch (ch) {
case 'r':
break;
case 'a':
if (value(vi_TERSE)) {
vshowmode(gettext("A"));
} else {
vshowmode(gettext("APPEND MODE"));
}
break;
case 's':
if (value(vi_TERSE)) {
vshowmode(gettext("S"));
} else {
vshowmode(gettext("SUBSTITUTE MODE"));
}
break;
case 'c':
if (value(vi_TERSE)) {
vshowmode(gettext("C"));
} else {
vshowmode(gettext("CHANGE MODE"));
}
break;
case 'R':
if (value(vi_TERSE)) {
vshowmode(gettext("R"));
} else {
vshowmode(gettext("REPLACE MODE"));
}
break;
case 'i':
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INSERT MODE"));
}
break;
case 'o':
if (value(vi_TERSE)) {
vshowmode(gettext("O"));
} else {
vshowmode(gettext("OPEN MODE"));
}
break;
default:
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INPUT MODE"));
}
}
strcLIN(gcursor);
/* zero genbuf */
*gcursor = 0;
cursor = linebuf;
vgotoCL(nqcolumn(cursor - 1, genbuf));
} /* end for (;;) loop in vappend() */
if (imultlinecnt && gotNL) {
imultlinerep(savecnt, startsrcline, startsrccol, endsrccol);
} else if (omultlinecnt) {
omultlinerep(savecnt, startsrcline, endsrccol);
#ifdef XPG6
} else if (savecnt > 1 && ch == 'r' && gotNL) {
/*
* XPG6 assertion 313 & 254 : Position cursor for [count]r\n
* then insert [count -1] newlines.
*/
endsrccol = gcursor - genbuf - 1;
rmultlinerep(savecnt, endsrccol);
#endif /* XPG6 */
}
/*
* All done with insertion, position the cursor
* and sync the screen.
*/
hold = oldhold;
if ((imultlinecnt && gotNL) || omultlinecnt) {
fixdisplay();
#ifdef XPG6
} else if (savecnt > 1 && ch == 'r' && gotNL) {
fixdisplay();
/*
* XPG6 assertion 313 & 254 [count]r\n : Set flag to call
* fixdisplay() after operate() has finished. To be sure that
* the text (after the last \n followed by an indent) is always
* displayed, fixdisplay() is called right before getting
* the next command.
*/
redisplay = 1;
#endif /* XPG6 */
} else if (cursor > linebuf) {
cursor = lastchr(linebuf, cursor);
#ifdef XPG6
/*
* XPG6 assertion 313 & 254 [count]r\n :
* For 'r' command, when the replacement char causes new
* lines to be created, point cursor to first non-blank.
* The old code, ie: cursor = lastchr(linebuf, cursor);
* set cursor to the blank before the first non-blank
* for r\n
*/
if (ch == 'r' && gotNL && isblank((int)*cursor))
++cursor;
#endif /* XPG6 */
}
if (state != HARDOPEN)
vsyncCL();
else if (cursor > linebuf)
back1();
doomed = 0;
wcursor = cursor;
(void) vmove();
}
/*
* Insert character c at current cursor position.
* Multi-character inserts occur only as a result
* of expansion of tabs (i.e. inssize == 1 except
* for tabs) and code assumes this in several place
* to make life simpler.
*/
int
vinschar(int c)
/* int c; /\* mjm: char --> int */
{
register int i;
register cell *tp;
char *OIM;
bool OXN;
int noim, filler = 0;
insmc1 = colsc(c) - 1;
if ((!IM || !EI) && ((hold & HOLDQIK) || !value(REDRAW) || value(SLOWOPEN))) {
/*
* Don't want to try to use terminal
* insert mode, or to try to fake it.
* Just put the character out; the screen
* will probably be wrong but we will fix it later.
*/
if (c == '\t') {
vgotab();
return c;
}
vputchar(c);
#ifdef MB
if (insmc1 == 0 && (vtube0[destcol]&(TRIM|MULTICOL))==MULTICOL)
vtube0[destcol] = INVBIT;
#endif /* MB */
if (DEPTH(vcline) * WCOLS + !value(REDRAW) >
(destline - LINE(vcline)) * WCOLS + destcol)
return c;
/*
* The next line is about to be clobbered
* make space for another segment of this line
* (on an intelligent terminal) or just remember
* that next line was clobbered (on a dumb one
* if we don't care to redraw the tail.
*/
if (AL) {
vnpins(0);
} else {
c = LINE(vcline) + DEPTH(vcline);
if (c < LINE(vcline + 1) || c > WBOT)
return c;
i = destcol;
vinslin(c, 1, vcline);
DEPTH(vcline)++;
vigoto(c, i);
vprepins();
}
return c;
}
/*
* Compute the number of positions in the line image of the
* current line. This is done from the physical image
* since that is faster. Note that we have no memory
* from insertion to insertion so that routines which use
* us don't have to worry about moving the cursor around.
*/
if (*vtube0 == 0)
linend = 0;
else {
/*
* Search backwards for a non-null character
* from the end of the displayed line.
*/
i = WCOLS * DEPTH(vcline);
if (i == 0)
i = WCOLS;
tp = vtube0 + i;
while (*--tp == 0)
if (--i == 0)
break;
linend = i + insmc1;
}
/*
* We insert at a position based on the physical location
* of the output cursor.
*/
inscol = destcol + (destline - LINE(vcline)) * WCOLS;
insmc0 = 0;
#ifdef MB
i = 0;
while (inscol+i < LBSIZE && vtube0[inscol+i]&MULTICOL &&
(vtube0[inscol+insmc0+i]&(MULTICOL|TRIM)) != MULTICOL)
i++;
while (inscol+insmc0+i < LBSIZE &&
(vtube0[inscol+insmc0+i]&(MULTICOL|TRIM)) == MULTICOL)
insmc0++;
#endif /* MB */
if (c == '\t') {
/*
* Characters inserted from a tab must be
* remembered as being part of a tab, but we can't
* use QUOTE here since we really need to print blanks.
* QUOTE|' ' is the representation of this.
*/
inssiz = tabcol(inscol+insmc0, value(TABSTOP)) - inscol - insmc0;
c = ' ' | QUOTE;
} else
inssiz = 1;
/*
* If the text to be inserted is less than the number
* of doomed positions, then we don't need insert mode,
* rather we can just typeover.
*/
if (inssiz + insmc1 <= doomed) {
endim();
if (inscol + insmc0 != linend)
doomed -= inssiz + insmc1;
#ifdef MB
if (insmc1 == 0 && c != '\t' &&
vtube0[inscol+insmc0] & MULTICOL)
vtube0[inscol+insmc0] = INVBIT;
#endif /* MB */
do
vputchar(c);
while (--inssiz);
return c;
}
/*
* Have to really do some insertion, thus
* stake out the bounds of the first following
* group of tabs, computing starting position,
* ending position, and the number of ``spaces'' therein
* so we can tell how much it will squish.
*/
tp = vtube0 + inscol + insmc0;
for (i = inscol + insmc0; i < linend; i++) {
if (*tp++ & QUOTE) {
--tp;
break;
}
}
tabstart = tabend = i;
tabslack = 0;
while (tabend < linend) {
i = *tp++;
if ((i & QUOTE) == 0)
break;
if ((i & (TRIM|MULTICOL)) == 0)
tabslack++;
tabsize++;
tabend++;
}
tabsize = tabend - tabstart;
/*
* For HP's and DM's, e.g. tabslack has no meaning.
*/
if (!IN)
tabslack = 0;
#ifdef IDEBUG
if (trace) {
fprintf(trace, "inscol %d, inssiz %d, tabstart %d, ",
inscol, inssiz, tabstart);
fprintf(trace, "tabend %d, tabslack %d, linend %d\n",
tabend, tabslack, linend);
}
#endif
OIM = IM;
OXN = XN;
noim = 0;
#ifdef MB
if (mb_cur_max > 1) {
if (destcol + 1 + insmc1 == WCOLS + 1) {
noim = 1;
if (insmc1 == 1 && insmc0 == 0)
filler = 1;
}
for (i = inscol; vtube0[i]; i++)
if (i + 1 >= WCOLS && vtube0[i] & MULTICOL) {
noim = 1;
break;
}
}
#endif /* MB */
if (noim) {
endim();
IM = 0;
XN = 0;
}
/*
* The real work begins.
*/
slakused = 0;
shft = 0;
if (tabsize) {
/*
* There are tabs on this line.
* If they need to expand, then the rest of the line
* will have to be shifted over. In this case,
* we will need to make sure there are no ``spaces''
* in the rest of the line (on e.g. CONCEPT-100)
* and then grab another segment on the screen if this
* line is now deeper. We then do the shift
* implied by the insertion.
*/
if (inssiz >= doomed + tabcol(tabstart, value(TABSTOP)) - tabstart) {
if (IN)
vrigid();
vneedpos(value(TABSTOP));
vishft();
}
} else if (inssiz + insmc1 > doomed)
/*
* No tabs, but line may still get deeper.
*/
vneedpos(inssiz + insmc1 - doomed);
/*
* Now put in the inserted characters.
*/
viin(c);
/*
* Now put the cursor in its final resting place.
*/
destline = LINE(vcline);
destcol = inscol + inssiz + insmc1 + filler;
vcsync();
if (IM != OIM) {
IM = OIM;
XN = OXN;
}
return c;
}
/*
* Move cursor to line y, column x, handling wraparound and scrolling.
*/
void
vgoto(register int y, register int x)
{
register cell *tp;
register int c;
/*
* Fold the possibly too large value of x.
*/
if (x >= WCOLS) {
y += x / WCOLS;
x %= WCOLS;
}
#ifdef MB
if (y >= 0 && y <= WLINES && mb_cur_max > 1 && !insmode) {
while (x > 0 && (vtube[y][x]&(MULTICOL|TRIM)) == MULTICOL &&
vtube[y][x-1] & MULTICOL &&
(vtube[y][x-1]&(MULTICOL|TRIM)) != MULTICOL)
x--;
}
#endif /* MB */
if (y < 0)
error(catgets(catd, 1, 238, "Internal error: vgoto"));
if (outcol >= WCOLS) {
if (AM) {
outline += outcol / WCOLS;
outcol %= WCOLS;
} else
outcol = WCOLS - 1;
}
/*
* In a hardcopy or glass crt open, print the stuff
* implied by a motion, or backspace.
*/
if (state == HARDOPEN || state == ONEOPEN) {
if (y != outline)
error(catgets(catd, 1, 239, "Line too long for open"));
if (x + 1 < outcol - x || (outcol > x && !BS))
destcol = 0, fgoto();
tp = vtube[WBOT] + outcol;
while (outcol != x)
if (outcol < x) {
if (*tp == 0)
*tp = ' ';
c = *tp++ & TRIM;
vputc(c && (!OS || EO) ? c : ' ');
outcol++;
} else {
if (BC)
vputp(BC, 0);
else
vputc('\b');
outcol--;
}
destcol = outcol = x;
destline = outline;
return;
}
/*
* If the destination position implies a scroll, do it.
*/
destline = y;
if (destline > WBOT && (!splitw || destline > WECHO)) {
endim();
vrollup(destline);
}
/*
* If there really is a motion involved, do it.
* The check here is an optimization based on profiling.
*/
destcol = x;
if ((destline - outline) * WCOLS != destcol - outcol) {
if (!MI)
endim();
fgoto();
}
}
/*
* Now do the insert of the characters (finally).
*/
void
viin(int c)
/* int c; /\* mjm: char --> int */
{
register cell *tp, *up;
register int i, j;
register bool noim = 0;
int remdoom;
short oldhold = hold;
hold |= HOLDPUPD;
if (tabsize && (IM && EI) && inssiz - doomed > tabslack)
/*
* There is a tab out there which will be affected
* by the insertion since there aren't enough doomed
* characters to take up all the insertion and we do
* have insert mode capability.
*/
if (inscol + insmc0 + doomed == tabstart) {
/*
* The end of the doomed characters sits right at the
* start of the tabs, then we don't need to use insert
* mode; unless the tab has already been expanded
* in which case we MUST use insert mode.
*/
slakused = 0;
noim = !shft;
} else {
/*
* The last really special case to handle is case
* where the tab is just sitting there and doesn't
* have enough slack to let the insertion take
* place without shifting the rest of the line
* over. In this case we have to go out and
* delete some characters of the tab before we start
* or the answer will be wrong, as the rest of the
* line will have been shifted. This code means
* that terminals with only insert chracter (no
* delete character) won't work correctly.
*/
i = inssiz - doomed - tabslack - slakused;
i %= value(TABSTOP);
if (i > 0) {
vgotoCL(tabstart);
godm();
for (i = inssiz - doomed - tabslack; i > 0; i--)
vputp(DC, DEPTH(vcline));
enddm();
}
}
/*
* Now put out the characters of the actual insertion.
*/
vigotoCL(inscol);
remdoom = doomed;
for (i = inssiz; i > 0; i--) {
if (remdoom > insmc1) {
remdoom--;
endim();
} else if (noim || insmc1 && remdoom == insmc1)
endim();
else if (IM && EI) {
vcsync();
goim();
}
vputchar(c);
}
if (!IM || !EI || remdoom && remdoom == insmc1) {
/*
* We are a dumb terminal; brute force update
* the rest of the line; this is very much an n^^2 process,
* and totally unreasonable at low speed.
*
* You asked for it, you get it.
*/
tp = vtube0 + inscol + doomed;
for (i = inscol + doomed; i < tabstart; i++)
vputchar(*tp++);
hold = oldhold;
vigotoCL(tabstart + inssiz + insmc0 - doomed);
for (i = tabsize - (inssiz - insmc0 - doomed) + shft;
i > 0; i--)
vputchar(' ' | QUOTE);
} else {
if (!IN) {
/*
* On terminals without multi-line
* insert in the hardware, we must go fix the segments
* between the inserted text and the following
* tabs, if they are on different lines.
*
* Aaargh.
*/
tp = vtube0;
for (j = (inscol + insmc0 + inssiz - 1) / WCOLS + 1;
j <= (tabstart + inssiz - doomed - 1) / WCOLS; j++) {
vgotoCL(j * WCOLS);
i = inssiz - doomed + insmc1;
up = tp + j * WCOLS - i;
goim();
do
vputchar(*up++);
while (--i && *up);
}
} else {
/*
* On terminals with multi line inserts,
* life is simpler, just reflect eating of
* the slack.
*/
tp = vtube0 + tabend;
for (i = tabsize - (inssiz + insmc1 - doomed); i >= 0; i--) {
if ((*--tp & (QUOTE|TRIM)) == QUOTE) {
--tabslack;
if (tabslack >= slakused)
continue;
}
*tp = ' ' | QUOTE;
}
}
/*
* Blank out the shifted positions to be tab positions.
*/
if (shft) {
tp = vtube0 + tabend + shft;
for (i = tabsize - (inssiz - doomed) + shft; i > 0; i--)
if ((*--tp & QUOTE) == 0)
*tp = ' ' | QUOTE;
}
}
/*
* Finally, complete the screen image update
* to reflect the insertion.
*/
hold = oldhold;
tp = vtube0 + tabstart;
up = tp + insmc1 + inssiz - doomed;
for (i = tabstart; i > inscol + doomed; i--)
*--up = *--tp;
#ifdef MB
for (i = insmc1; i > 0; i--)
*--up = MULTICOL;
#endif
for (i = inssiz; i > 0; i--)
*--up = c | (insmc1 ? MULTICOL : 0);
doomed = 0;
}
