static int cfa10036_devices_init(void)
{
int i, ret;
/* initizalize muxing */
for (i = 0; i < ARRAY_SIZE(cfa10036_pads); i++)
imx_gpio_mode(cfa10036_pads[i]);
armlinux_set_bootparams((void *)IMX_MEMORY_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_CFA10036);
add_generic_device("mxs_mci", 0, NULL, IMX_SSP0_BASE, SZ_8K,
IORESOURCE_MEM, &mci_pdata);
add_generic_device("ocotp", 0, NULL, IMX_OCOTP_BASE, SZ_8K,
IORESOURCE_MEM, NULL);
i2c_register_board_info(0, cfa10036_i2c_devices, ARRAY_SIZE(cfa10036_i2c_devices));
add_generic_device_res("i2c-gpio", 0, NULL, 0, &i2c_gpio_pdata);
cfa10036_detect_hw();
ret = envfs_register_partition("disk0", 1);
if (ret != 0)
printf("Cannot create the 'env0' persistent "
"environment storage (%d)\n", ret);
return 0;
}
static int imx23_olinuxino_devices_init(void)
{
int i, rc;
/* initizalize gpios */
for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
imx_gpio_mode(pad_setup[i]);
armlinux_set_bootparams((void *)IMX_MEMORY_BASE + 0x100);
armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);
/* enable IOCLK to run at the PLL frequency */
imx_set_ioclk(480000000);
/* run the SSP unit clock at 100,000 kHz */
imx_set_sspclk(0, 100000000, 1);
add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
0x8000, IORESOURCE_MEM, &mci_pdata);
olinuxino_init_usb();
rc = envfs_register_partition("disk0", 1);
if (rc != 0)
printf("Cannot create the 'env0' persistent "
"environment storage (%d)\n", rc);
return 0;
}
static int imx23_olinuxino_devices_init(void)
{
int i, rc;
/* initizalize gpios */
for (i = 0; i < ARRAY_SIZE(pad_setup); i++)
imx_gpio_mode(pad_setup[i]);
armlinux_set_architecture(MACH_TYPE_IMX233_OLINUXINO);
add_generic_device("mxs_mci", DEVICE_ID_DYNAMIC, NULL, IMX_SSP1_BASE,
0x8000, IORESOURCE_MEM, &mci_pdata);
olinuxino_init_usb();
rc = envfs_register_partition("disk0", 1);
if (rc != 0)
printf("Cannot create the 'env0' persistent "
"environment storage (%d)\n", rc);
return 0;
}