/*********************************************************************
* @fn checkDL
*
* @brief Check validity of the downloaded image.
*
* input parameters
*
* None.
*
* output parameters
*
* None.
*
* @return TRUE or FALSE for image valid.
*/
static uint8_t checkDL(void)
{
bool ret;
uint16_t crc[2];
ret = extFlashOpen();
if (ret)
{
ret = extFlashRead((size_t)APP_IMAGE_START, sizeof(crc), (uint8_t*)crc);
if (ret)
{
if ((crc[0] == 0xFFFF) || (crc[0] == 0x0000))
{
ret = false;
}
if (crc[1] == 0xFFFF || crc[1] == 0x0000)
{
crc[1] = crcCalcDL();
}
ret = crc[0] == crc[1];
}
extFlashClose();
}
return ret ? TRUE : FALSE;
}
/*********************************************************************
* @fn OADTarget_getCurrentImageHeader
*
* @brief Get the header of the running image.
*
* @param pValue - pointer to store running image header.
*
* @return none
*/
void OADTarget_getCurrentImageHeader(img_hdr_t *pHdr)
{
if (extFlashOpen())
{
//N.B: it is assumed that OADTarget_storeImageHeader() has been called prior
// to this function.
uint32_t metaDataAddr;
ExtImageInfo_t tempHdr;
if (imgInfo.imgType == EFL_OAD_IMG_TYPE_STACK || imgInfo.imgType == EFL_OAD_IMG_TYPE_NP)
{
metaDataAddr = EFL_IMAGE_INFO_ADDR_BLE;
}
else // Assume imgInfo.imgType == EFL_OAD_IMG_TYPE_APP
{
metaDataAddr = EFL_IMAGE_INFO_ADDR_APP;
}
extFlashRead(metaDataAddr, sizeof(ExtImageInfo_t), (uint8_t*)&tempHdr);
extFlashClose();
pHdr->len = tempHdr.len;
pHdr->ver = tempHdr.ver == 0xFF ? 0x00 : tempHdr.ver; // In case metadata does not exist.
memcpy(pHdr->uid,tempHdr.uid,sizeof(tempHdr.uid));
pHdr->res[0] = HI_UINT16(tempHdr.addr);
pHdr->res[1] = LO_UINT16(tempHdr.addr);
pHdr->res[2] = tempHdr.imgType;
pHdr->res[3] = 0xFF;
}
}
/*******************************************************************************
* @fn SensorTag_saveFactoryImage
*
* @brief Save the current image to external flash as a factory image
*
* @return none
*/
static bool SensorTag_saveFactoryImage(void)
{
bool success;
success = extFlashOpen();
if (success)
{
uint32_t address;
// Erase external flash
for (address= 0; address<EFL_FLASH_SIZE; address+=EFL_PAGE_SIZE)
{
extFlashErase(address,EFL_PAGE_SIZE);
}
// Install factory image
for (address=0; address<EFL_SIZE_RECOVERY && success; address+=EFL_PAGE_SIZE)
{
success = extFlashErase(EFL_ADDR_RECOVERY+address, EFL_PAGE_SIZE);
if (success)
{
size_t offset;
static uint8_t buf[256]; // RAM storage needed due to SPI/DMA limitation
for (offset=0; offset<EFL_PAGE_SIZE; offset+=sizeof(buf))
{
const uint8_t *pIntFlash;
// Copy from internal to external flash
pIntFlash = (const uint8_t*)address + offset;
memcpy(buf,pIntFlash,sizeof(buf));
success = extFlashWrite(EFL_ADDR_RECOVERY+address+offset,
sizeof(buf), buf);
// Verify first few bytes
if (success)
{
extFlashRead(EFL_ADDR_RECOVERY+address+offset, sizeof(buf), buf);
success = buf[2] == pIntFlash[2] && buf[3] == pIntFlash[3];
}
}
}
}
extFlashClose();
}
return success;
}
/*********************************************************************
* @fn OADTarget_imgIdentifyWrite
*
* @brief Process the Image Identify Write. Determined if the image
* header identified here should or should not be downloaded by
* this application.
*
* @param connHandle - connection message was received on
* @param pValue - pointer to image header data
*
* @return status
*/
bStatus_t OADTarget_imgIdentifyWrite(uint16_t connHandle, uint8_t *pValue)
{
static img_hdr_t rxHdr;
static img_hdr_t ImgHdr;
oadBlkNum = 0;
rxHdr.ver = BUILD_UINT16(pValue[0], pValue[1]);
rxHdr.len = BUILD_UINT16(pValue[2], pValue[3]);
(void)memcpy(rxHdr.uid, pValue+4, sizeof(rxHdr.uid));
// Read out running image's header.
uint8_t *flashAddr = (uint8_t *)(APP_IMAGE_START + OAD_IMG_HDR_OSET);
memcpy(&ImgHdr,flashAddr,sizeof(img_hdr_t));
// Calculate block total of the new image.
// total Blocks = (length in HAL Flash words) / ((16 Byte Block)/(4 Byte Word))
oadBlkTot = rxHdr.len / (OAD_BLOCK_SIZE / HAL_FLASH_WORD_SIZE);
/* Requirements to begin OAD:
* 1) LSB of image version cannot be the same, this would imply a code overlap
* between currently running image and new image, which is illegal.
* 2) Total blocks of new image must not exceed maximum blocks supported, else
* the new image cannot fit.
* 3) New image must not be empty header.
* 4) Optional: Add customer criteria for initiating OAD here.
*/
if ( (oadBlkTot <= OAD_BLOCK_MAX) && (oadBlkTot != 0))
{
oadBlkNum = 0;
// Image accepted, request image.
OADTarget_getNextBlockReq(connHandle, 0);
}
else
{
// Image rejected, identify current image to OAD manager.
OADTarget_rejectImage(connHandle, &ImgHdr);
}
// Ready to go: open flash driver
flashOk = extFlashOpen();
return (flashOk ? SUCCESS : FAILURE);
}
/*******************************************************************************
* @fn SensorTag_hasFactoryImage
*
* @brief Determine if the SensorTag has a pre-programmed factory image
* in external flash. Criteria for deciding if a factory image is
* present is that the reset vector stored in external flash is valid.
*
* @return none
*/
static bool SensorTag_hasFactoryImage(void)
{
bool valid;
valid = extFlashOpen();
if (valid)
{
uint16_t buffer[2];
// 1. Check reset vector
valid = extFlashRead(EFL_ADDR_RECOVERY,sizeof(buffer),(uint8_t*)buffer);
if (valid)
{
valid = (buffer[0] != 0xFFFF && buffer[1] != 0xFFFF) &&
(buffer[0] != 0x0000 && buffer[1] != 0x0000);
}
extFlashClose();
}
return valid;
}
/*********************************************************************
* @fn OADTarget_open
*
* @brief Open an OAD target for download.
*
* @param none
*
* @return TRUE if OAD target successfully opened
*/
uint8_t OADTarget_open(void)
{
isOpen = extFlashOpen();
return isOpen;
}
