// Given trial number, execute trials
// Returns trial result code
int do_simple_trial(int num)
{
// This supplies the title at the bottom of the eyetracker display
eyecmd_printf("record_status_message 'SIMPLE WORDS, TRIAL %d/%d' ", num, NTRIALS);
/* Always send a TRIALID message before starting to record.
It should contain trial condition data required for analysis.
*/
eyemsg_printf("TRIALID %s", trial_word[num-1]);
/* TRIAL_VAR_DATA message is recorded for EyeLink Data Viewer analysis
It specifies the list of trial variables value for the trial
This must be specified within the scope of an individual trial (i.e., after
"TRIALID" and before "TRIAL_RESULT") */
eyemsg_printf("!V TRIAL_VAR_DATA %s", trial_word[num-1]);
// Before recording, we place reference graphics on the EyeLink display
set_offline_mode(); // Must be offline to draw to EyeLink screen
eyecmd_printf("clear_screen 0"); // clear tracker display and draw box at center
eyecmd_printf("draw_box %d %d %d %d 7", SCRWIDTH/2-16, SCRHEIGHT/2-16,
SCRWIDTH/2+16, SCRHEIGHT/2+16);
// Actually run the trial: display a single word
//SEAN 20000L --> 5000L
//return simple_recording_trial(trial_word[num-1], 5000L);
// above was the original; intercept this with
return 1; //sean_recording_trial();
}
// ######################################################################
void EyeTrackerEyeLink::startTracking()
{
#ifndef HAVE_EYELINK
LFATAL("Proprietary EyeLink developer API not installed");
#else
// Show message at bottom of tracker display:
eyecmd_printf(const_cast<char*>("record_status_message 'Recording [%d]...' "), getSession());
// set FIXUPDATE event property
eyecmd_printf(const_cast<char*>("fixation_update_interval = 50"));
eyecmd_printf(const_cast<char*>("fixation_update_accumulate = 50"));
// Always send a TRIALID message before starting to record. It
// should contain trial condition data required for analysis:
eyemsg_printf(const_cast<char*>("TRIALID EYETRACK"));
// TRIAL_VAR_DATA message is recorded for EyeLink Data Viewer
// analysis It specifies the list of trial variables value for the
// trial This must be specified within the scope of an individual
// trial (i.e., after "TRIALID" and before "TRIAL_RESULT"):
eyemsg_printf(const_cast<char*>("!V TRIAL_VAR_DATA EYETRACKING"));
// Log eye tracker time at onset of clip:
if (itsEventLog.isValid())
itsEventLog->pushEvent(sformat("Eye Tracker Time = %d", int(current_msec())));
// Actually start the recording:
if (start_recording(1, 1, 1, 1))
LFATAL("Error trying to start recording");
#endif
}
/* End recording: adds 100 msec of data to catch final events */
static void end_trial(void)
{
clear_full_screen_window(target_background_color); /* hide display */
end_realtime_mode(); /* NEW: ensure we release realtime lock */
pump_delay(100); /* CHANGED: allow Windows to clean up */
/* while we record additional 100 msec of data */
stop_recording();
/* Reset link data, disable fixation event data */
eyecmd_printf("link_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,BUTTON");
eyecmd_printf("fixation_update_interval = 0");
eyecmd_printf("fixation_update_accumulate = 0");
}
// ######################################################################
void EyeTrackerEyeLink::stop1()
{
#ifndef HAVE_EYELINK
LFATAL("Proprietary EyeLink developer API not installed");
#else
set_offline_mode();
pump_delay(500); // give some time to tracker to stop
// close EDF data file if any:
if (itsEDFfname.getVal().empty() == false)
eyecmd_printf(const_cast<char*>("close_data_file"));
// shutdown EyeLink properly:
close_expt_graphics();
// transfer the EDF file if any:
if (itsEDFfname.getVal().empty() == false)
{
LINFO("Transferring EDF file to '%s'", itsEDFfname.getVal().c_str());
receive_data_file((char *)itsEDFfname.getVal().c_str(),
(char *)itsEDFfname.getVal().c_str(), 0);
}
// Disconnect from eyelink:
close_eyelink_connection();
EyeTracker::stop1();
#endif
}
// ######################################################################
void EyeTrackerEyeLink::stopTracking()
{
#ifndef HAVE_EYELINK
LFATAL("Proprietary EyeLink developer API not installed");
#else
// report response result: 0=timeout, else button number:
eyemsg_printf(const_cast<char*>("TRIAL_RESULT 1"));
// stop the tracker:
stop_recording();
// set FIXUPDATE event property (close it)
eyecmd_printf(const_cast<char*>("fixation_update_interval = 0"));
eyecmd_printf(const_cast<char*>("fixation_update_accumulate = 0"));
set_offline_mode();
#endif
}
/*
FOR EACH TRIAL:
- set title, TRIALID
- Create bitmaps and EyeLink display graphics
- Check for errors in creating bitmaps
- Run the trial recording loop
- Delete bitmaps
- Return any error code
Given trial number, execute trials
Returns trial result code
*/
int do_simple_trial(int num)
{
/* This supplies the title at the bottom of the eyetracker display */
eyecmd_printf("record_status_message 'SIMPLE WORDS, TRIAL %d/%d' ", num, NTRIALS);
/*
Always send a TRIALID message before starting to record.
It should contain trial condition data required for analysis.
*/
eyemsg_printf("TRIALID %s", trial_word[num-1]);
/* Before recording, we place reference graphics on the EyeLink display */
set_offline_mode(); /* Must be offline to draw to EyeLink screen */
eyecmd_printf("clear_screen 0"); /* clear tracker display and draw box at center */
eyecmd_printf("draw_box %d %d %d %d 7", SCRWIDTH/2-16, SCRHEIGHT/2-16,
SCRWIDTH/2+16, SCRHEIGHT/2+16);
/* Actually run the trial: display a single word */
return simple_recording_trial(trial_word[num-1], 20000L);
}
// Create foreground and background bitmaps of picture
// EyeLink graphics: blank display with box at center
// type: 0 = blank background, 1= blank fovea (mask), 2 = blurred background
static int create_image_bitmaps(int type)
{
target_foreground_color = RGB(0,0,0); // color of calibration target
target_background_color = RGB(128,128,128); // background for drift correction
set_calibration_colors(target_foreground_color, target_background_color); // tell EXPTSPPT the colors
clear_full_screen_window(target_background_color);
// NOTE: *** THE FOLLOWING TEXT SHOULD NOT APPEAR IN A REAL EXPERIMENT!!!! ****
get_new_font("Arial", 24, 1);
graphic_printf(target_foreground_color, -1, 1, SCRWIDTH/2, SCRHEIGHT/2, "Loading image...");
switch(type)
{
case 0: // blank background
fgbm = image_file_bitmap("images/sacrmeto.jpg", 0, SCRWIDTH,SCRHEIGHT,target_background_color);
bgbm = blank_bitmap(target_background_color);
break;
case 1: // blank fovea
fgbm = blank_bitmap(target_background_color);
bgbm = image_file_bitmap("images/sacrmeto.jpg", 0, SCRWIDTH,SCRHEIGHT,target_background_color);
break;
case 2: // normal and blurred bitmaps, stretched to fit display
fgbm = image_file_bitmap("images/sacrmeto.jpg", 0, SCRWIDTH,SCRHEIGHT,target_background_color);
bgbm = image_file_bitmap("images/sac_blur.jpg", 0, SCRWIDTH,SCRHEIGHT,target_background_color);
break;
}
eyecmd_printf("clear_screen 0"); // clear EyeLink display
eyecmd_printf("draw_box %d %d %d %d 15", // Box around fixation point
SCRWIDTH/2-16, SCRHEIGHT/2-16, SCRWIDTH/2+16, SCRHEIGHT/2+16);
if(!fgbm || !bgbm) // Check that both bitmaps exist.
{
eyemsg_printf("ERROR: could not load image");
alert_printf("ERROR: could not load an image file");
if(fgbm) DeleteObject(fgbm);
if(bgbm) DeleteObject(bgbm);
return SKIP_TRIAL;
}
return 0;
}
// ######################################################################
void EyeTrackerEyeLink::openSDL()
{
#ifdef HAVE_EYELINK
// set the display characteristics:
DISPLAYINFO di;
di.width = itsDims.getVal().w(); di.height = itsDims.getVal().h();
di.left = 0; di.top = 0; di.right = di.width-1; di.bottom = di.height-1;
di.bits = 24; di.palsize = 0; di.pages = 0; di.refresh = 60.0F;
di.winnt = 0;
// open the display with our wishes:
if (init_expt_graphics(NULL, &di))
LFATAL("Cannot open display");
// see what we actually got:
get_display_information(&di);
LINFO("DISPLAYINFO: [%dx%d}: (%d,%d)-(%d,%d) %dbpp %.1fHz",
int(di.width), int(di.height), int(di.left), int(di.top),
int(di.right), int(di.bottom), int(di.bits), di.refresh);
if (di.palsize) LFATAL("Paletized color modes not supported");
// Prepare for calibration and other settings:
set_target_size(10, 2);
set_calibration_colors(&target_foreground_color, &target_background_color);
set_cal_sounds(const_cast<char*>(""), const_cast<char*>(""), const_cast<char*>(""));
set_dcorr_sounds(const_cast<char*>(""), const_cast<char*>("off"), const_cast<char*>("off"));
// Setup calibration type:
eyecmd_printf(const_cast<char*>("calibration_type = HV9"));
// Configure tracker for display:
eyecmd_printf(const_cast<char*>("screen_pixel_coords = %ld %ld %ld %ld"),
di.left, di.top, di.right, di.bottom);
if (di.refresh > 40.0F)
eyemsg_printf(const_cast<char*>("FRAMERATE %1.2f Hz."), di.refresh);
#endif
}
// ######################################################################
void EyeTrackerEyeLink::manualDriftCorrection(Point2D<double> eyepos,
Point2D<double> targetpos)
{
#ifndef HAVE_EYELINK
LFATAL("Proprietary EyeLink developer API not installed");
#else
char message[256];
eyecmd_printf(const_cast<char*>("drift_correction %ld %ld %ld %ld"),
targetpos.i-eyepos.i, targetpos.j-eyepos.j,
targetpos.i, targetpos.j);
// Get drift correction result
eyelink_cal_message(message);
eyemsg_printf(message);
#endif
}
int end_expt(char * our_file_name)
{
/*END: close, transfer EDF file */
set_offline_mode(); /* set offline mode so we can transfer file */
pump_delay(500); /* delay so tracker is ready */
/* close data file */
eyecmd_printf("close_data_file");
if(break_pressed())
return exit_eyelink(); /* don't get file if we aborted experiment */
if(our_file_name[0]) /* make sure we created a file */
{
close_expt_graphics(); /* tell EXPTSPPT to release window */
receive_data_file(our_file_name, "", 0);
}
/* transfer the file, ask for a local name */
return exit_eyelink();
}
app_main()
{
int i, j;
char our_file_name[260] = "TEST";
if(open_eyelink_connection(0)) return -1; // abort if we can't open link
set_offline_mode();
flush_getkey_queue(); // initialize getkey() system
is_eyelink2 = (2 == eyelink_get_tracker_version(NULL) );
get_display_information(&dispinfo); // get window size, characteristics
// NOTE: Camera display does not support 16-color modes
// NOTE: Picture display examples don't work well with 256-color modes
// However, all other sample programs should work well.
if(dispinfo.palsize==16) // 16-color modes not functional
{
alert_printf("This program cannot use 16-color displays");
goto shutdown;
}
if(dispinfo.refresh < 40) // wait_for_refresh doesn't work!
{
alert_printf("No refresh synchroniztion available!");
}
if(dispinfo.palsize) // 256-color modes: palettes not supported by this example
{
alert_printf("This program is not optimized for 256-color displays");
}
//SEAN -display window
if(make_full_screen_window(application_instance)) goto shutdown; // create the window
if(init_expt_graphics(full_screen_window, NULL)) goto shutdown; // register window with EXPTSPPT
i = SCRWIDTH/60; // select best size for calibration target
j = SCRWIDTH/300; // and focal spot in target
if(j < 2) j = 2;
set_target_size(i, j); // tell DLL the size of target features
target_foreground_color = RGB(0,0,0); // color of calibration target
target_background_color = RGB(128,128,128); // background for calibration and drift correction
set_calibration_colors(target_foreground_color, target_background_color); // tell EXPTSPPT the colors
set_cal_sounds("", "", "");
set_dcorr_sounds("", "off", "off");
// draw a title screen
// SEAN
clear_full_screen_window(target_background_color); // clear screen
get_new_font("Times Roman", SCRHEIGHT/32, 1); // select a font
// Draw text
graphic_printf(target_foreground_color, target_background_color, 1, SCRWIDTH/2, 1*SCRHEIGHT/30,
"EyeLink Demonstration Experiment: Sample Code");
graphic_printf(target_foreground_color, target_background_color, 1, SCRWIDTH/2, 2*SCRHEIGHT/30,
"Included with the Experiment Programming Kit for Windows");
graphic_printf(target_foreground_color, target_background_color, 1, SCRWIDTH/2, 3*SCRHEIGHT/30,
"All code is Copyright (c) 1997-2002 SR Research Ltd.");
graphic_printf(target_foreground_color, target_background_color, 0, SCRWIDTH/5, 4*SCRHEIGHT/30,
"Source code may be used as template for your experiments.");
//SEAN - file i/o
i = edit_dialog(full_screen_window, "Create EDF File", // Get the EDF file name
"Enter Tracker EDF file name:", our_file_name, 8);
if(i==-1) goto shutdown; // ALT-F4: terminate
if(i==1) our_file_name[0] = 0; // Cancelled: No file name
if(our_file_name[0]) // If file name set, open it
{
if(!strstr(our_file_name, ".")) strcat(our_file_name, ".EDF"); // add extension
i = open_data_file(our_file_name); // open file
if(i!=0) // check for error
{
alert_printf("Cannot create EDF file '%s'", our_file_name);
goto shutdown;
} // add title to preamble
eyecmd_printf("add_file_preamble_text 'RECORDED BY %s' ", program_name);
}
// Now configure tracker for display resolution
eyecmd_printf("screen_pixel_coords = %ld %ld %ld %ld", // Set display resolution
dispinfo.left, dispinfo.top, dispinfo.right, dispinfo.bottom);
eyecmd_printf("calibration_type = HV9"); // Setup calibration type
eyemsg_printf("DISPLAY_COORDS %ld %ld %ld %ld", // Add resolution to EDF file
dispinfo.left, dispinfo.top, dispinfo.right, dispinfo.bottom);
if(dispinfo.refresh>40)
eyemsg_printf("FRAMERATE %1.2f Hz.", dispinfo.refresh);
// SET UP TRACKER CONFIGURATION
// set parser saccade thresholds (conservative settings)
if(is_eyelink2)
{
eyecmd_printf("select_parser_configuration 0"); // 0 = standard sensitivity
}
else
{
eyecmd_printf("saccade_velocity_threshold = 35");
eyecmd_printf("saccade_acceleration_threshold = 9500");
}
// set EDF file contents
eyecmd_printf("file_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,MESSAGE,BUTTON");
eyecmd_printf("file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS");
// set link data (used for gaze cursor)
eyecmd_printf("link_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,BUTTON");
eyecmd_printf("link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS");
// Program button #5 for use in drift correction
eyecmd_printf("button_function 5 'accept_target_fixation'");
if(!eyelink_is_connected() || break_pressed()) goto end_expt; // make sure we're still alive
// RUN THE EXPERIMENTAL TRIALS (code depends on type of experiment)
// Calling run_trials() performs a calibration followed by trials
// This is equivalent to one block of an experiment
// It will return ABORT_EXPT if the program should exit
i = run_trials();
end_expt: // END: close, transfer EDF file
set_offline_mode(); // set offline mode so we can transfer file
pump_delay(500); // delay so tracker is ready
eyecmd_printf("close_data_file"); // close data file
if(break_pressed()) goto shutdown; // don't get file if we aborted experiment
if(our_file_name[0]) // make sure we created a file
receive_data_file(our_file_name, "", 0); // transfer the file, ask for a local name
shutdown: // CLEANUP
close_expt_graphics(); // tell EXPTSPPT to release window
close_eyelink_connection(); // disconnect from tracker
close_full_screen_window();
return 0;
}
int gaze_control_trial(UINT32 time_limit)
{
UINT32 trial_start; /* trial start time (for timeout) */
UINT32 drawing_time; /* retrace-to-draw delay*/
int button; /* the button pressed (0 if timeout) */
int error; /* trial result code*/
ALLF_DATA evt; /* buffer to hold sample and event data*/
int eye_used = -1; /* indicates which eye's data to display*/
int i;
SDL_Surface *gbm; /* The bitmap containing the stimulus display*/
/* This supplies the title at the bottom of the eyetracker display */
eyecmd_printf("record_status_message 'GAZE CONTROL TRIAL' ");
/*
Always send a TRIALID message before starting to record.
It should contain trial condition data required for analysis.
*/
eyemsg_printf("TRIALID CONTROL");
/* TRIAL_VAR_DATA message is recorded for EyeLink Data Viewer analysis
It specifies the list of trial variables value for the trial
This must be specified within the scope of an individual trial (i.e., after
"TRIALID" and before "TRIAL_RESULT")
*/
eyemsg_printf("!V TRIAL_VAR_DATA GAZECTRL");
/*
IMGLOAD command is recorded for EyeLink Data Viewer analysis
It displays a default image on the overlay mode of the trial viewer screen.
Writes the image filename + path info
*/
eyemsg_printf("!V IMGLOAD FILL images/grid.png");
/*
IAREA command is recorded for EyeLink Data Viewer analysis
It creates a set of interest areas by reading the segment files
Writes segmentation filename + path info
*/
eyemsg_printf("!V IAREA FILE segments/grid.ias");
/* Before recording, we place reference graphics on the EyeLink display*/
set_offline_mode(); /* Must be offline to draw to EyeLink screen*/
gbm = draw_grid_to_bitmap_segment("grid.ias", "segments", 1);;/* Draw bitmap and EyeLink reference graphics*/
segment_source = gbm;
/*
Save bitmap and transfer to the tracker pc.
Since it takes a long to save the bitmap to the file, the
value of sv_options should be set as SV_NOREPLACE to save time
*/
bitmap_save_and_backdrop(gbm, 0, 0, 0, 0, "grid.png", "images", SV_NOREPLACE,
0, 0, (UINT16)(BX_MAXCONTRAST|((eyelink_get_tracker_version(NULL)>=2)?0:BX_GRAYSCALE)));
/* DO PRE-TRIAL DRIFT CORRECTION */
/* We repeat if ESC key pressed to do setup. */
while(1)
{ /* Check link often so we can exit if tracker stopped*/
if(!eyelink_is_connected()) return ABORT_EXPT;
/* We let do_drift_correct() draw target in this example*/
/* 3rd argument would be 0 if we already drew the display*/
error = do_drift_correct((INT16)(SCRWIDTH/2), (INT16)(SCRHEIGHT/2), 1, 1);
/* repeat if ESC was pressed to access Setup menu */
if(error!=27) break;
}
clear_full_screen_window(target_background_color); /* make sure display is blank*/
/* Configure EyeLink to send fixation updates every 50 msec*/
eyecmd_printf("link_event_filter = LEFT,RIGHT,FIXUPDATE");
eyecmd_printf("fixation_update_interval = 50");
eyecmd_printf("fixation_update_accumulate = 50");
init_regions(); /* Initialize regions for this display*/
/*
Start data recording to EDF file, BEFORE DISPLAYING STIMULUS
You should always start recording 50-100 msec before required
otherwise you may lose a few msec of data
*/
error = start_recording(1,1,0,1); /* send events only through link*/
if(error != 0) /* ERROR: couldn't start recording*/
{
SDL_FreeSurface(gbm); /* Be sure to delete bitmap before exiting!*/
return error; /* Return the error code*/
}
/* record for 100 msec before displaying stimulus */
begin_realtime_mode(100); /* Windows 2000/XP: no interruptions from now on*/
/*
DISPLAY OUR IMAGE TO SUBJECT by copying bitmap to display
Because of faster drawing speeds and good refresh locking,
we now place the stimulus onset message just after display refresh
and before drawing the stimulus. This is accurate and will allow
drawing a new stimulus each display refresh.
However, we do NOT send the message after the retrace--this may take too long
instead, we add a number to the message that represents the delay
from the event to the message in msec
*/
/* COPY BITMAP to display*/
SDL_BlitSurface(gbm, NULL, window,NULL);
Flip(window);
drawing_time = current_msec(); /* time of retrace*/
trial_start = drawing_time;
SDL_BlitSurface(gbm, NULL, window,NULL);
/* delay from retrace (time to draw)*/
drawing_time = current_msec()-drawing_time;
/* message for RT recording in analysis */
eyemsg_printf("%d DISPLAY ON", drawing_time);
/* message marks zero-plot time for EDFVIEW */
eyemsg_printf("SYNCTIME %d", drawing_time);
/* Print a title for the trial (for demo only)*/
get_new_font("Times Roman", 24, 1);
graphic_printf(window,target_foreground_color, NONE, SCRWIDTH/2, 24, "Gaze Control Trial");
if(!eyelink_wait_for_block_start(100, 0, 1)) /* wait for link event data*/
{
end_trial();
alert_printf("ERROR: No link events received!");
return TRIAL_ERROR;
}
eye_used = eyelink_eye_available(); /* determine which eye(s) are available*/
switch(eye_used) /* select eye, add annotation to EDF file */
{
case RIGHT_EYE:
eyemsg_printf("EYE_USED 1 RIGHT");
break;
case BINOCULAR: /* both eye's data present: use left eye only*/
eye_used = LEFT_EYE;
case LEFT_EYE:
eyemsg_printf("EYE_USED 0 LEFT");
break;
}
/* Now get ready for trial loop*/
eyelink_flush_keybuttons(0); /* reset keys and buttons from tracker */
/*
we don't use getkey() especially in a time-critical trial
as Windows may interrupt us and cause an unpredicatable delay
so we would use buttons or tracker keys only
Trial loop: till timeout or response -- added code for processing
FIXUPDATE events
*/
while(1)
{
/* First, check if recording aborted */
if((error=check_recording())!=0) return error;
/* Check if trial time limit expired*/
if(current_time() > trial_start+time_limit)
{
eyemsg_printf("TIMEOUT"); /* message to log the timeout */
end_trial(); /* local function to stop recording*/
button = 0; /* trial result message is 0 if timeout */
break; /* exit trial loop*/
}
if(break_pressed()) /* check for program termination or ALT-F4 or CTRL-C keys*/
{
end_trial(); /* local function to stop recording*/
return ABORT_EXPT; /* return this code to terminate experiment*/
}
/* check for local ESC key to abort trial (useful in debugging) */
if(escape_pressed())
{
end_trial(); /* local function to stop recording*/
return SKIP_TRIAL; /* return this code if trial terminated*/
}
/* BUTTON RESPONSE TEST */
/* Check for eye-tracker buttons pressed
/* This is the preferred way to get response data or end trials */
button = eyelink_last_button_press(NULL);
if(button!=0) /* button number, or 0 if none pressed*/
{
/* message to log the button press*/
eyemsg_printf("ENDBUTTON %d", button);
/* local function to stop recording*/
end_trial();
break; /* exit trial loop*/
}
/* GET FIXUPDATE EVENTS, PROCESS*/
i = eyelink_get_next_data(NULL); /* Check for data from link*/
if(i == FIXUPDATE) /* only process FIXUPDATE events*/
{
/* get a copy of the FIXUPDATE event */
eyelink_get_float_data(&evt);
/* only process if it's from the desired eye?*/
if(evt.fe.eye == eye_used)
{
/* get average position and duration of the update */
process_fixupdate((int)(evt.fe.gavx), (int)(evt.fe.gavy),/* Process event */
evt.fe.entime-evt.fe.sttime);
}
}
}/* end of loop*/
/* report response result: 0=timeout, else button number*/
eyemsg_printf("TRIAL_RESULT %d", button);
/* Call this at the end of the trial, to handle special conditions*/
SDL_FreeSurface(gbm);
segment_source = NULL;
return check_record_exit();
}
// Given trial number, execute trials
// Returns trial result code
int do_gcwindow_trial(int num)
{
int i;
set_offline_mode(); // Must be offline to draw to EyeLink screen
switch(num)
{ // #1: gaze-contingent text, normal in window, "xx" outside
case 1:
// This supplies the title at the bottom of the eyetracker display
eyecmd_printf("record_status_message 'GC TEXT (WINDOW)' ");
// Always send a TRIALID message before starting to record.
// It should contain trial condition data required for analysis.
eyemsg_printf("TRIALID GCTXTW");
// TRIAL_VAR_DATA message is recorded for EyeLink Data Viewer analysis
// It specifies the list of trial variables value for the trial
// This must be specified within the scope of an individual trial (i.e., after
// "TRIALID" and before "TRIAL_RESULT")
eyemsg_printf("!V TRIAL_VAR_DATA TEXT TEXT MASK");
if(create_text_bitmaps())
{
eyemsg_printf("ERROR: could not create bitmap");
return SKIP_TRIAL;
}
// IMGLOAD command is recorded for EyeLink Data Viewer analysis
// It displays a default image on the overlay mode of the trial viewer screen.
// Writes the image filename + path info
eyemsg_printf("!V IMGLOAD FILL images/text.png");
// Save the bitmap and transfer to the tracker pc
// Since it takes a long time to save a bitmap to disk, the sv_options option
// should be set as SV_NOREPLACE
bitmap_save_and_backdrop(fgbm, 0, 0, 0, 0,
"text.png", "images", SV_NOREPLACE,
0, 0, BX_NODITHER|BX_GRAYSCALE);
i = gc_window_trial(fgbm, bgbm, SCRWIDTH/4, SCRHEIGHT/3, 0, 60000L); // Gaze-contingent window, normal text
DeleteObject(fgbm);
DeleteObject(bgbm);
return i;
case 2: // #2: gaze-contingent text, "xx" in window, normal outside
eyecmd_printf("record_status_message 'GC TEXT (MASK)' ");
eyemsg_printf("TRIALID GCTXTM");
// TRIAL_VAR_DATA message is recorded for EyeLink Data Viewer analysis
// It specifies the list of trial variables value for the trial
// This must be specified within the scope of an individual trial (i.e., after
// "TRIALID" and before "TRIAL_RESULT")
eyemsg_printf("!V TRIAL_VAR_DATA TEXT MASK TEXT");
if(create_text_bitmaps())
{
eyemsg_printf("ERROR: could not create bitmap");
return SKIP_TRIAL;
}
// IMGLOAD command is recorded for EyeLink Data Viewer analysis
// It displays a default image on the overlay mode of the trial viewer screen.
// Writes the image filename + path info
eyemsg_printf("!V IMGLOAD FILL images/text.png");
// Save the bitmap and transfer to the tracker pc
// Since it takes a long time to save a bitmap to disk, the sv_options option
// should be set as SV_NOREPLACE
bitmap_save_and_backdrop(fgbm, 0, 0, 0, 0,
"text.png", "images", SV_NOREPLACE,
0, 0, BX_NODITHER|BX_GRAYSCALE);
i = gc_window_trial(bgbm, fgbm, SCRWIDTH/4, SCRHEIGHT/3, 1, 60000L); // Gaze-contingent window, masked text
DeleteObject(fgbm);
DeleteObject(bgbm);
return i;
case 3: // #3: Image, normal in window, blank outside
eyecmd_printf("record_status_message 'GC IMAGE (WINDOW)' ");
eyemsg_printf("TRIALID GCTXTW");
// TRIAL_VAR_DATA message is recorded for EyeLink Data Viewer analysis
// It specifies the list of trial variables value for the trial
// This must be specified within the scope of an individual trial (i.e., after
// "TRIALID" and before "TRIAL_RESULT")
eyemsg_printf("!V TRIAL_VAR_DATA IMAGE IMAGE MASK");
if(create_image_bitmaps(0))
{
eyemsg_printf("ERROR: could not create bitmap");
return SKIP_TRIAL;
}
// IMGLOAD command is recorded for EyeLink Data Viewer analysis
// It displays a default image on the overlay mode of the trial viewer screen.
// Writes the image filename + path info
eyemsg_printf("!V IMGLOAD FILL images/sacrmeto.jpg");
// Transfer the bitmap to tracker PC as backdrop for gaze cursors
bitmap_to_backdrop(fgbm, 0, 0, 0, 0,
0, 0, (UINT16)(BX_MAXCONTRAST|((eyelink_get_tracker_version(NULL)>=2)?0:BX_GRAYSCALE)));
i = gc_window_trial(fgbm, bgbm, SCRWIDTH/4, SCRHEIGHT/3, 0, 60000L); // Gaze-contingent window, normal image
DeleteObject(fgbm);
DeleteObject(bgbm);
return i;
case 4: // #4: Image, blank in window, normal outside
eyecmd_printf("record_status_message 'GC IMAGE (MASK)' ");
eyemsg_printf("TRIALID GCTXTM");
// TRIAL_VAR_DATA message is recorded for EyeLink Data Viewer analysis
// It specifies the list of trial variables value for the trial
// This must be specified within the scope of an individual trial (i.e., after
// "TRIALID" and before "TRIAL_RESULT")
eyemsg_printf("!V TRIAL_VAR_DATA IMAGE MASK IMAGE");
if(create_image_bitmaps(1))
{
eyemsg_printf("ERROR: could not create bitmap");
return SKIP_TRIAL;
}
// IMGLOAD command is recorded for EyeLink Data Viewer analysis
// It displays a default image on the overlay mode of the trial viewer screen.
// Writes the image filename + path info
eyemsg_printf("!V IMGLOAD FILL images/sacrmeto.jpg");
// Transfer the bitmap to tracker PC as backdrop for gaze cursors
bitmap_to_backdrop(bgbm, 0, 0, 0, 0,
0, 0, (UINT16)(BX_MAXCONTRAST|((eyelink_get_tracker_version(NULL)>=2)?0:BX_GRAYSCALE)));
i = gc_window_trial(fgbm, bgbm, SCRWIDTH/4, SCRHEIGHT/3, 1, 60000L); // Gaze-contingent window, masked image
DeleteObject(fgbm);
DeleteObject(bgbm);
return i;
case 5: // #5: Image, blurred outside window
eyecmd_printf("record_status_message 'GC IMAGE (BLURRED)' ");
eyemsg_printf("TRIALID GCTXTB");
// TRIAL_VAR_DATA message is recorded for EyeLink Data Viewer analysis
// It specifies the list of trial variables value for the trial
// This must be specified within the scope of an individual trial (i.e., after
// "TRIALID" and before "TRIAL_RESULT")
eyemsg_printf("!V TRIAL_VAR_DATA IMAGE IMAGE BLURRED");
if(create_image_bitmaps(2))
{
eyemsg_printf("ERROR: could not create bitmap");
return SKIP_TRIAL;
}
// IMGLOAD command is recorded for EyeLink Data Viewer analysis
// It displays a default image on the overlay mode of the trial viewer screen.
// Writes the image filename + path info
eyemsg_printf("!V IMGLOAD FILL images/sacrmeto.jpg");
// Transfer the bitmap to tracker PC as backdrop for gaze cursors
bitmap_to_backdrop(fgbm, 0, 0, 0, 0,
0, 0, (UINT16)(BX_MAXCONTRAST|((eyelink_get_tracker_version(NULL)>=2)?0:BX_GRAYSCALE)));
i = gc_window_trial(fgbm, bgbm, SCRWIDTH/4, SCRHEIGHT/3, 0, 60000L); // Gaze-contingent window, masked image
DeleteObject(fgbm);
DeleteObject(bgbm);
return i;
}
return ABORT_EXPT; // illegal trial number
}
// Draw text within margins, left-justified, with word-wrap.
// Draw to <hdc> context, so it supports display and bitmaps
// (bitmap must already be created and selected into context).
// Draw boxes for each word on EyeLink tracker display if <dotrack> set
// Use font selected with get_new_font(), and draws it in <color>
// RECT <margins> sets margins, and <lspace> sets pixels between lines
// Save the segmentation info into the text.
// In the current implementation, the bottom edge of the line N overlaps with the
// top edge of line N+1 and in each line, the left edge of word N overlaps with
// the right edge of word N+1;
// Extra space (twice the width of letter 'M') is added to the the first and
// last segments of each line
void draw_text_box_segment(HDC hdc, char *txt, COLORREF color,
RECT margins, int lspace, int dotrack, char *filename)
{
long x, y; // drawing position
int count_AI=0, j; // count the total number of segments
char *sword, *eword, wholeword[200], previous_word[200]; // word start, end pointer, wholeword and prebious word
int swx, ewx; // word start, end position
char *sispace, *c; // text pointers
int height ; // height of characters
int end_line=0, previous_end_line=1, further_left, end_text=1; // check whether it is end of a line
SIZE size, M_size; // Size info (width and height of a rectangle)
TEXTMETRIC tm; // Text Metrics
FILE *seg_file; // handle to segment file
RECT previous; // Rect info for the previous segment
further_left = margins.left;
previous.left = margins.left;
previous.right = margins.left;
previous.top = margins.top;
previous.bottom = margins.top; // Initialization of the previous segment information;
seg_file = fopen(filename, "wt"); // open segmentation file; overwritten if previous such file exists
if(!seg_file)
eyemsg_printf("Error in opening the file to record segments");
// REQUIRED FOR EVIEW
if(dotrack) eyecmd_printf("clear_screen 0"); // clear eye tracker display
GetTextExtentPoint32(hdc, "M", 1, &M_size); // width of word
SetBkMode(hdc, TRANSPARENT); // set text color
SetTextColor(hdc, color);
SelectObject(hdc, current_font); // Select cached font into context
GetTextMetrics(hdc, &tm); // Get height of characters
height = tm.tmHeight;
SetTextJustification(hdc, 0, 0) ; // set normal text spacing
SetTextAlign(hdc, TA_LEFT | TA_TOP);
x = margins.left; // initial drawing position
y = margins.top;
c = txt; // initial text to scan
strcpy(previous_word, ""); // Intialize strings
strcpy(wholeword, "");
while(*c) // loop through lines of text
{
end_line=0;
nextword: // START NEW WORD:
sispace = c; // scan over any leading spaces
while(*c==' ') c++;
if(c!=sispace) // advance over the spaces (if any)
{
GetTextExtentPoint32(hdc, sispace, c-sispace, &size);
x += size.cx;
}
if(*c==0) // handle end-of-text
break;
if(*c=='\n') // handle end-of-line before word
{
c++; // skip over end-of-line character
nextline:
end_line=1;
// START NEW LINE:
x = margins.left; // return to start of line
y += lspace; // top of new line
if(y+height > margins.bottom) // Exceeding the page limit
{
fprintf(seg_file, "RECTANGLE\t%d\t%d\t%d\t%d\t%d\t%s\n",
count_AI, previous_end_line? (previous.left-2*M_size.cx):(previous.left+further_left)/2,
previous.top, end_line?(previous.right+2*M_size.cx):(previous.right+swx)/2,
previous.bottom, previous_word);
end_text=0; // Abnormal end of text
break;
}
// stop if it would go outside margins
goto nextword; // continue to print
}
swx = x; // continue in current line:
sword = c; // record start of this word
j=0;
while(*c && !isspace(*c) && *c!='\n')
{
wholeword[j]=*c;
j++;
c++; // scan till end of word and copy the word
}
wholeword[j]='\0'; // Zero terminate the string
if(sword==c) goto nextword; // no word: continue by skipping spaces
eword = c; // record end of word
GetTextExtentPoint32(hdc, sword, eword-sword, &size); // width of word
ewx = size.cx + swx; // position of end of word
if(ewx > margins.right) // would it extend past right margin?
{
c = sword; // restore text pointer
goto nextline; // start a new line with current word
}
TextOut(hdc, x, y, sword, eword-sword); // Print the word
if(dotrack) // draw box on EyeLink display
eyecmd_printf("draw_box %d %d %d %d 15", swx, y, ewx, y+height);
// If it is the first segment in the text.
if (count_AI==1)
previous_end_line=1;
// General cases: Record the information regarding the last segment;
if (count_AI>=1)
fprintf(seg_file, "RECTANGLE\t%d\t%d\t%d\t%d\t%d\t%s\n",
count_AI, previous_end_line? (previous.left-2*M_size.cx):(previous.left+further_left)/2,
previous.top, end_line?(previous.right+2*M_size.cx):(previous.right+swx)/2,
previous.bottom, previous_word);
further_left = previous.right; // The right border of the word before the previous word
previous.left=swx;
previous.right=ewx;
previous.top=y-(lspace-height)/2;
previous.bottom=y+(height+lspace)/2;
strcpy(previous_word, wholeword);
previous_end_line=end_line; // Record information regarding the last segment
x = ewx; // update current printing location
count_AI++;
}
// Normal ending of the text: record the current segment info
if (end_text)
fprintf(seg_file, "RECTANGLE\t%d\t%d\t%d\t%d\t%d\t%s\n",
count_AI, previous_end_line? (previous.left-2*M_size.cx):(swx+further_left)/2, y-(lspace-height)/2,
ewx+2*M_size.cx, y+(height+lspace)/2, wholeword);
GdiFlush(); // ADDED for Wimdows 2000/XP: Forces drawing to be immediate
SelectObject(hdc, GetStockObject(SYSTEM_FONT)); // deselect the font
fclose(seg_file);
}
// ######################################################################
void EyeTrackerEyeLink::start1()
{
#ifndef HAVE_EYELINK
LFATAL("Proprietary EyeLink developer API not installed");
#else
// get the link to the eye-tracker going:
if (open_eyelink_connection(0))
LFATAL("Cannot open link to EyeLink tracker - make sure your "
"hostname resolves to 100.1.1.2 (check /etc/hosts)");
// Basic initializations:
set_offline_mode();
flush_getkey_queue();/* initialize getkey() system */
// Open EyeLink version of SDL
openSDL();
// set the display characteristics:
DISPLAYINFO di; // defined in eyelink/core_expt.h
di.width = itsDims.getVal().w(); di.height = itsDims.getVal().h();
di.left = 0; di.top = 0; di.right = di.width-1; di.bottom = di.height-1;
di.bits = 24; di.palsize = 0; di.pages = 0; di.refresh = 60.0F;
di.winnt = 0;
set_calibration_colors(&target_foreground_color, &target_background_color);
// open EDF file if set:
if (itsEDFfname.getVal().empty() == false)
{
if (open_data_file((char *)(itsEDFfname.getVal().c_str())) != 0)
LFATAL("Cannot open EDF file '%s'", itsEDFfname.getVal().c_str());
eyecmd_printf(const_cast<char*>("add_file_preamble_text 'RECORDED BY iLab code' "));
}
// Add resolution to EDF file:
eyemsg_printf(const_cast<char*>("DISPLAY_COORDS %ld %ld %ld %ld"),
di.left, di.top, di.right, di.bottom);
/* SET UP TRACKER CONFIGURATION */
/* set parser saccade thresholds (conservative settings) */
/* 0 = standard sensitivity */
eyecmd_printf(const_cast<char*>("select_parser_configuration 0"));
// set EDF file contents:
eyecmd_printf(const_cast<char*>("file_event_filter = LEFT,RIGHT,FIXATION,SACCADE,"
"BLINK,MESSAGE,BUTTON"));
eyecmd_printf(const_cast<char*>("file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS"));
// set link data (used for gaze cursor):
eyecmd_printf(const_cast<char*>("link_event_filter = LEFT,RIGHT,FIXATION,FIXUPDATE,SACCADE,BLINK,BUTTON"));
eyecmd_printf(const_cast<char*>("link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS"));
// Program button #5 for use in drift correction:
eyecmd_printf(const_cast<char*>("button_function 5 'accept_target_fixation'"));
// setup eyelink filtering: default is "1 2"
eyecmd_printf(const_cast<char*>("heuristic_filter = 1 2"));
eyelink_wait_for_mode_ready(500);
// make sure we're still alive:
if (!eyelink_is_connected() || break_pressed())
LFATAL("Connection to EyeLink broken or aborted");
/* TRIAL_VAR_LABELS message is recorded for EyeLink Data Viewer analysis
It specifies the list of trial variables for the trial
This should be written once only and put before the recording of
individual trials */
eyemsg_printf(const_cast<char*>("TRIAL_VAR_LABELS CONDITION"));
// Configure EyeLink to send fixation updates every 50 msec:
//eyecmd_printf("link_event_filter = LEFT,RIGHT,FIXUPDATE");
//eyecmd_printf("fixation_update_interval = 50");
//eyecmd_printf("fixation_update_accumulate = 50");
EyeTracker::start1();
#endif
}
// Draw text within margins, left-justified, with word-wrap.
// Draw to <hdc> context, so it supports display and bitmaps
// (bitmap must already be created and selected into context).
// Draw boxes for each word on EyeLink tracker display if <dotrack> set
// Use font selected with get_new_font(), and draws it in <color>
// RECT <margins> sets margins, and <lspace> sets pixels between lines
void draw_text_box(HDC hdc, char *txt, COLORREF color, RECT margins, int lspace, int dotrack)
{
short x, y; // drawing position
char *sword, *eword; // word start, end pointer
int swx, ewx; // word start, end position
char *sispace, *c; // text pointers
int height; // height of characters
SIZE size;
TEXTMETRIC tm;
if(dotrack) eyecmd_printf("clear_screen 0"); // clear eye tracker display
SetBkMode(hdc, TRANSPARENT); // set text color
SetTextColor(hdc, color);
SelectObject(hdc, current_font); // Select cached font into context
GetTextMetrics(hdc, &tm); // Get height of characters
height = tm.tmHeight;
SetTextJustification(hdc, 0, 0) ; // set normal text spacing
SetTextAlign(hdc, TA_LEFT | TA_TOP);
x = (short)margins.left; // initial drawing position
y = (short)margins.top;
c = txt; // initial text to scan
while(*c) // loop through lines of text
{
nextword: // START NEW WORD:
sispace = c; // scan over any leading spaces
while(*c==' ') c++;
if(c!=sispace) // advance over the spaces (if any)
{
GetTextExtentPoint32(hdc, sispace, c-sispace, &size);
x += (short)size.cx;
}
if(*c==0) break; // handle end-of-text
if(*c=='\n') // handle end-of-line before word
{
c++; // skip over end-of-line character
nextline: // START NEW LINE:
x = (short)margins.left; // return to start of line
y += lspace; // top of new line
if(y+height > margins.bottom) break; // stop if it would go outside margins
goto nextword; // continue to print
}
swx = x; // continue in current line:
sword = c; // record start of this word
while(*c && !isspace(*c) && *c!='\n') c++; // scan till end of word
if(sword==c) goto nextword; // no word: continue by skipping spaces
eword = c; // record end of word
GetTextExtentPoint32(hdc, sword, eword-sword, &size); // width of word
ewx = size.cx + swx; // position of end of word
if(ewx > margins.right) // would it extend past right margin?
{
c = sword; // restore text pointer
goto nextline; // start a new line with current word
}
TextOut(hdc, x, y, sword, eword-sword); // Print the word
if(dotrack) // draw box on EyeLink display
eyecmd_printf("draw_box %d %d %d %d 15", swx, y, ewx, y+height);
x = ewx; // update current printing location
}
GdiFlush(); // ADDED for Wimdows 2000/XP: Forces drawing to be immediate
SelectObject(hdc, GetStockObject(SYSTEM_FONT)); // deselect the font
}
bool Eyelink::initialize(){
boost::mutex::scoped_lock lock(EyelinkDriverLock);
if (Eyelink_Initialized) {
merror(M_IODEVICE_MESSAGE_DOMAIN,"Eyelink was previously initialized! Trying again, but this is dangerous!!");
}
Eyelink_Initialized = false;
// Initializes the link
//mprintf(M_IODEVICE_MESSAGE_DOMAIN, "Trying to find Eyelink System at %s",tracker_ip);
if (set_eyelink_address( &tracker_ip[0] ) )
merror(M_IODEVICE_MESSAGE_DOMAIN,"Failed to set Tracker to address %s", tracker_ip.c_str());
if(open_eyelink_connection(0))
merror(M_IODEVICE_MESSAGE_DOMAIN,"Failed to connect to Tracker at %s", tracker_ip.c_str());
else {
ELINKNODE node;
// generate data file name
time_t now = time(NULL);
struct tm* t = gmtime(&now);
sprintf(data_file_name, "%02d%06d.edf",(t->tm_year-100),t->tm_yday*1440 + t->tm_hour*60 + t->tm_min);
//YYMMMMMM : YY=Years since 2k, MMMMMM=Minutes in current year
if ( open_data_file( data_file_name ) ) {
mwarning(M_IODEVICE_MESSAGE_DOMAIN,"Eyelink datafile setting failed (%s)",data_file_name);
}
else {
mprintf(M_IODEVICE_MESSAGE_DOMAIN,"Eyelink logs to local file %s",data_file_name);
}
// Tell the tracker what data to include in samples
if (OK_RESULT != eyecmd_printf("link_sample_data = LEFT,RIGHT,GAZE,HREF,PUPIL,AREA")) {
mwarning(M_IODEVICE_MESSAGE_DOMAIN,
"Eyelink did not respond to link_sample_data command; sample data may be incomplete");
}
// tell the tracker who we are
eyelink_set_name((char*)("MWorks_over_Socket"));
// verify the name
if( eyelink_get_node(0,&node) != OK_RESULT )
merror(M_IODEVICE_MESSAGE_DOMAIN,"Error, EyeLink doesn't respond");
else eyemsg_printf((char*)("%s connected"), node.name);
// Enable link data reception
eyelink_reset_data(1);
}
// Eyelink should now be in "TCP-Link Open" mode
if(eyelink_is_connected()) {
tracker_version = eyelink_get_tracker_version(version_info);
mprintf(M_IODEVICE_MESSAGE_DOMAIN, "Eyelink %d System Version %s connected via Socket",tracker_version,version_info);
Eyelink_Initialized = true;
stopped = true;
}
else {
merror(M_IODEVICE_MESSAGE_DOMAIN,"Error, Eyelink Connection could not be established");
}
return Eyelink_Initialized;
}
int app_main(char * trackerip, DISPLAYINFO * disp)
{
UINT16 i, j;
char our_file_name[260] = "TEST";
char verstr[50];
int eyelink_ver = 0;
int tracker_software_ver = 0;
if(trackerip)
set_eyelink_address(trackerip);
if(open_eyelink_connection(0)) return -1; /* abort if we can't open link */
set_offline_mode();
flush_getkey_queue(); /* initialize getkey() system */
eyelink_ver = eyelink_get_tracker_version(verstr);
if (eyelink_ver == 3)
tracker_software_ver = get_tracker_sw_version(verstr);
if(init_expt_graphics(NULL, disp))
goto shutdown; /* register window with EXPTSPPT */
window = SDL_GetVideoSurface();
get_display_information(&dispinfo); /* get window size, characteristics */
/*
NOTE: Camera display does not support 16-color modes
NOTE: Picture display examples don't work well with 256-color modes
However, all other sample programs should work well.
*/
if(dispinfo.palsize) /* 256-color modes: palettes not supported by this example */
alert_printf("This program is not optimized for 256-color displays");
i = SCRWIDTH/60; /* select best size for calibration target */
j = SCRWIDTH/300; /* and focal spot in target */
if(j < 2) j = 2;
set_target_size(i, j); /* tell DLL the size of target features */
/* color of calibration target */
SETCOLOR(target_foreground_color, 0,0,0);
/* background for calibration and drift correction */
SETCOLOR(target_background_color, 128,128,128);
/* tell EXPTSPPT the colors */
set_calibration_colors(&target_foreground_color, &target_background_color);
set_cal_sounds("", "", "");
set_dcorr_sounds("", "off", "off");
/* draw a title screen */
clear_full_screen_window(target_background_color); /* clear screen */
get_new_font("Times Roman", SCRHEIGHT/32, 1); /* select a font */
/* Draw text */
graphic_printf(window, target_foreground_color, CENTER, SCRWIDTH/2, 1*SCRHEIGHT/30,
"EyeLink Demonstration Experiment: Communicate with Listener");
graphic_printf(window, target_foreground_color, CENTER, SCRWIDTH/2, 2*SCRHEIGHT/30,
"Included with the Experiment Programming Kit for Windows");
graphic_printf(window, target_foreground_color, CENTER, SCRWIDTH/2, 3*SCRHEIGHT/30,
"All code is Copyright (c) 1997-2002 SR Research Ltd.");
graphic_printf(window, target_foreground_color, CENTER, SCRWIDTH/5, 4*SCRHEIGHT/30,
"Source code may be used as template for your experiments.");
SDL_Flip(window);
eyelink_set_name("comm_simple"); /* NEW: set our network name */
if(check_for_listener()) /* check for COMM_LISTENER application */
{
alert_printf("Could not communicate with COMM_LISTENER application.");
goto shutdown;
}
if(i==1) our_file_name[0] = 0; /* Cancelled: No file name */
if(our_file_name[0]) /* If file name set, open it */
{
if(!strstr(our_file_name, ".")) strcat(our_file_name, ".EDF"); /* add extension */
i = open_data_file(our_file_name); /* open file */
if(i!=0) /* check for error */
{
alert_printf("Cannot create EDF file '%s'", our_file_name);
goto shutdown;
}
/* add title to preamble */
eyecmd_printf("add_file_preamble_text 'RECORDED BY %s' ", program_name);
}
/*
SET UP TRACKER CONFIGURATION
NOTE: set contents before sending messages!
set EDF file contents
*/
if(eyelink_ver>=2)
{
eyecmd_printf("select_parser_configuration 0"); // 0 = standard sensitivity
if(eyelink_ver == 2) //turn off scenelink camera stuff
{
eyecmd_printf("scene_camera_gazemap = NO");
}
}
else
{
eyecmd_printf("saccade_velocity_threshold = 35");
eyecmd_printf("saccade_acceleration_threshold = 9500");
}
// NOTE: set contents before sending messages!
// set EDF file contents
eyecmd_printf("file_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,MESSAGE,BUTTON");
eyecmd_printf("file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS%s",(tracker_software_ver>=4)?",HTARGET":"");
// set link data (used for gaze cursor)
eyecmd_printf("link_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,BUTTON");
eyecmd_printf("link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS%s",(tracker_software_ver>=4)?",HTARGET":"");
/* NEW: Allow EyeLink I (v2.1+) to echo messages back to listener */
eyecmd_printf("link_nonrecord_events = BUTTONS, MESSAGES");
/* Program button #5 for use in drift correction */
eyecmd_printf("button_function 5 'accept_target_fixation'");
/* Now configure tracker for display resolution */
eyecmd_printf("screen_pixel_coords = %ld %ld %ld %ld", /* Set display resolution */
dispinfo.left, dispinfo.top, dispinfo.right, dispinfo.bottom);
eyecmd_printf("calibration_type = HV9"); /* Setup calibration type */
eyemsg_printf("DISPLAY_COORDS %ld %ld %ld %ld",/* Add resolution to EDF file */
dispinfo.left, dispinfo.top, dispinfo.right, dispinfo.bottom);
if(dispinfo.refresh>40)
eyemsg_printf("FRAMERATE %1.2f Hz.", dispinfo.refresh);
/* make sure we're still alive */
if(!eyelink_is_connected() || break_pressed()) goto end_expt;
/*
RUN THE EXPERIMENTAL TRIALS (code depends on type of experiment)
Calling run_trials() performs a calibration followed by trials
This is equivalent to one block of an experiment
It will return ABORT_EXPT if the program should exit
*/
i = run_trials();
end_expt: /* END: close, transfer EDF file */
set_offline_mode(); /* set offline mode so we can transfer file */
pump_delay(500); /* delay so tracker is ready */
eyecmd_printf("close_data_file"); /* close data file */
if(break_pressed()) goto shutdown;/* don't get file if we aborted experiment */
if(our_file_name[0]) /* make sure we created a file */
receive_data_file(our_file_name, "", 0); /* transfer the file, ask for a local name */
shutdown: /* CLEANUP */
close_expt_graphics(); /* tell EXPTSPPT to release window */
close_eyelink_connection(); /* disconnect from tracker */
return 0;
}
PsychError EyelinkCommand(void)
{
int i = 0;
int iNumInArgs = 0;
int iStatus = -1;
PsychArgFormatType psychArgType = PsychArgType_none;
double fTempValue = 0.0;
char *pstrTemp = NULL;
char *pstrFormat = NULL;
void **pArgs = NULL;
char strCommand[256];
// Clear strings
memset(strCommand, 0, sizeof(strCommand));
// Add help strings
PsychPushHelp(useString, synopsisString, seeAlsoString);
// Output help if asked
if(PsychIsGiveHelp()) {
PsychGiveHelp();
return(PsychError_none);
}
// Check arguments
PsychErrorExit(PsychRequireNumInputArgs(1));
// PsychErrorExit(PsychCapNumOutputArgs(0));
PsychErrorExit(PsychCapNumOutputArgs(1));
// Verify eyelink is up and running
EyelinkSystemIsConnected();
EyelinkSystemIsInitialized();
// Alloc and grab the input format string
PsychAllocInCharArg(1, TRUE, &pstrFormat);
iNumInArgs = PsychGetNumInputArgs();
// Alloc and grab input args
if (iNumInArgs > 1) {
pArgs = (void **)mxMalloc((iNumInArgs-1) * sizeof(char *));
// loop over the args
for (i = 2; i <= iNumInArgs; i++) {
psychArgType = PsychGetArgType(i);
switch(psychArgType) {
case PsychArgType_double:
if ((PsychGetArgM(i) == 1) && (PsychGetArgN(i) == 1)) {
PsychCopyInDoubleArg(i, TRUE, &fTempValue);
pArgs[i-2] = (void *) (int) fTempValue;
} else {
PsychGiveHelp();
return(PsychError_user);
}
break;
case PsychArgType_char:
pArgs[i-2] = NULL;
PsychAllocInCharArg(i, TRUE, &pstrTemp);
pArgs[i-2] = pstrTemp;
break;
default:
PsychGiveHelp();
return(PsychError_user);
break;
}
}
}
// Build eyelink command and execute
vsprintf(strCommand, pstrFormat, (va_list)pArgs);
iStatus = eyecmd_printf(strCommand);
if (pArgs != NULL) {
mxFree(pArgs);
}
// Copy out the command result
PsychCopyOutDoubleArg(1, FALSE, iStatus);
return(PsychError_none);
}
