/* --- Main FDC dispatcher --- */
static void fdc_execute(FDC_765 *self)
{
/* This code to dump out FDC commands as they are received is very useful
* in debugging
*
* */
int NC;
fdc_dprintf(5, "FDC: ");
for (NC = 0; NC < bytes_in_cmd[self->fdc_cmd_buf[0] & 0x1F]; NC++)
fdc_dprintf(5, "%02x ", self->fdc_cmd_buf[NC]);
fdc_dprintf(5, "\n");
/* */
/* Check if the DOR (ugh!) is being used to force us to a
different drive. */
fdc_dorcheck(self);
/* Reset "seek finished" flag */
self->fdc_st0 &= 0xBF;
switch(self->fdc_cmd_buf[0] & 0x1F)
{
case 2: fdc_read_track(self); break; /* 2: READ TRACK */
case 3: fdc_specify(self); break; /* 3: SPECIFY */
case 4: fdc_sense_drive(self); break; /* 4: SENSE DRV STATUS*/
case 5: fdc_write(self, 0); break; /* 5: WRITE */
case 6: fdc_read(self, 0); break; /* 6: READ */
case 7: fdc_recalibrate(self); break; /* 7: RECALIBRATE */
case 8: fdc_sense_int(self); break; /* 8: SENSE INT STATUS*/
case 9: fdc_write(self, 1); break; /* 9: WRITE DELETED */
case 10:fdc_read_id(self); break; /*10: READ ID */
case 12:fdc_read(self, 1); break; /*12: READ DELETED */
case 13:fdc_format(self); break; /*13: FORMAT TRACK */
case 15:fdc_seek(self); break; /*15: SEEK */
case 17: /*17: SCAN EQUAL */
case 25: /*25: SCAN LOW/EQUAL */
case 30:fdc_scan(self); break; /*30: SCAN HIGH/EQUAL*/
default:
fdc_dprintf(2, "Unknown FDC command %d\n",
self->fdc_cmd_buf[0] & 0x1F);
fdc_error(self); break;
}
}
/* Input a res_len long result string from the FDC.
* The FDC should be ready to send the result or an error
* (EBUSY or ETIME) will occur.
*/
int fdc_result(__u8 * res_data, int res_len)
{
int result = 0;
unsigned long flags;
int count = res_len;
int retry = 0;
TRACE_FUN(ft_t_any);
save_flags(flags);
cli();
fdc_status = inb(fdc.msr);
if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_OUT_READY) {
TRACE(ft_t_err, "fdc not ready");
result = -EBUSY;
} else while (count) {
if (!(fdc_status & FDC_BUSY)) {
restore_flags(flags);
TRACE_ABORT(-EIO, ft_t_err, "premature end of result phase");
}
result = fdc_read(res_data);
if (result < 0) {
TRACE(ft_t_fdc_dma,
"fdc_mode = %02x, status = %02x at index %d",
(int) fdc_mode,
(int) fdc_status,
res_len - count);
if (++retry <= 3) {
TRACE(ft_t_warn, "fdc_read timeout, retry");
} else {
TRACE(ft_t_err, "fdc_read timeout, fatal");
/* recover ??? */
break;
++retry;
}
} else {
--count;
++res_data;
}
}
restore_flags(flags);
fdc_usec_wait(FT_RQM_DELAY); /* allow FDC to negate BSY */
TRACE_EXIT result;
}
/* If no request is currently being processed and there's new requests in
the queue, process the first one. This can be called from an interrupt
or the normal kernel context. */
void do_request(blkreq_t *req)
{
fd_dev_t *dev;
u_long track, sect, cyl, head, big_sect, sects;
u_long flags;
int i;
save_flags(flags);
/* This label is used to eliminate tail-recursion. */
top:
cli();
if(current_req != NULL)
{
if(req != NULL)
append_node(&fd_reqs, &req->node);
load_flags(flags);
return;
}
for(i = 0; i < 2; i++)
{
if(fd_devs[i].recalibrate)
{
fdc_recal(&fd_devs[i]);
if(req != NULL)
append_node(&fd_reqs, &req->node);
load_flags(flags);
return;
}
}
if(req == NULL)
{
if(!list_empty_p(&fd_reqs))
{
req = (blkreq_t *)fd_reqs.head;
remove_node(&req->node);
}
else
{
load_flags(flags);
return;
}
}
current_req = req;
#if 0
req->retries = 0;
#endif
load_flags(flags);
dev = REQ_FD_DEV(req);
DB(("fd:do_request: req=%p drive=%d block=%d nblocks=%d cmd=%d buf=%p\n",
req, dev->drvno, req->block, req->nblocks, req->command, req->buf));
switch(req->command)
{
case FD_CMD_SEEK: /* We wanna MOVE DA HEAD! */
/* Do da seek. */
if(fdc_seek(dev, req->block) == FALSE)
{
handle_error("FD_CMD_SEEK, seek");
goto top;
break;
}
/* Then Sense Interrupt Status */
if(fdc_sense() == FALSE)
{
handle_error("FD_CMD_SEEK, fdc_sense");
goto top;
break;
}
/* and now we have to Read the ID */
if(fdc_read_id(dev) == FALSE)
{
handle_error("FD_CMD_SEEK, read_id");
goto top;
break;
}
fd_end_request(0);
req = NULL;
goto top;
case FD_CMD_TIMER:
fd_end_request(0);
req = NULL;
goto top;
}
if(req->block >= dev->total_blocks)
{
kprintf("fd: Device %s (%p) doesn't have a block %d!\n",
dev->name, dev, req->block);
fd_end_request(-1);
req = NULL;
goto top;
}
big_sect = req->block;
sects = req->nblocks;
track = big_sect / dev->disk_p->sectors;
sect = big_sect % dev->disk_p->sectors + 1;
head = track % dev->disk_p->heads;
cyl = track / dev->disk_p->heads;
DB(("fd:do_request: cyl=%d sect=%d head=%d sects=%d\n", cyl, sect, head, sects));
switch(req->command)
{
case FD_CMD_READ: /* We wanna READ the floppy! */
#if 0
fd_end_request(0);
req = NULL;
goto top;
#endif
/* We need to seek to the right cylinder. */
if(fdc_seek(dev, cyl) == FALSE)
{
handle_error("FD_CMD_READ, seek");
goto top;
break;
}
/* Then Sense Interrupt Status */
if(fdc_sense() == FALSE)
{
handle_error("FD_CMD_READ, fdc_sense");
goto top;
break;
}
/* and now we have to Read the ID */
if(fdc_read_id(dev) == FALSE)
{
handle_error("FD_CMD_READ, read_id");
goto top;
break;
}
#define TPA(XX) ((u_long)TO_PHYSICAL(XX))
/* Tell the DMA what to do, and hope for the best! */
/* Should move this inside fdc, in fdc_read() i think */
DMAbuf.Buffer = track_buf;
DMAbuf.Page = (u_int8)((TPA(track_buf) >> 16) & 0xff);
DMAbuf.Offset = (u_int16)(TPA(track_buf) & 0xffff);
DMAbuf.Len = (u_int16)(dev->disk_p->sectors * dev->disk_p->heads *
FD_SECTSIZ) - 1;
DMAbuf.Chan = FLOPPY_DMA;
kernel->setup_dma(&DMAbuf, DMA_READ);
/* Now we issue a read command. */
if(fdc_read(dev, cyl) == FALSE)
{
handle_error("FD_CMD_READ, read");
goto top;
break;
}
break;
case FD_CMD_WRITE: /* We wanna WRITE it too! */
fd_end_request(0);
req = NULL;
goto top;
default:
kprintf("fd:do_request: Unknown command in fd_req, %d\n",
req->command);
fd_end_request(-1);
req = NULL;
goto top;
}
}
