int
main(void)
{
struct nffs_area_desc descs[NFFS_AREA_MAX];
/** Contains indices of the areas which can contain image data. */
uint8_t img_areas[NFFS_AREA_MAX];
/** Areas representing the beginning of image slots. */
uint8_t img_starts[2];
int cnt;
int total;
struct boot_rsp rsp;
int rc;
struct boot_req req = {
.br_area_descs = descs,
.br_image_areas = img_areas,
.br_slot_areas = img_starts,
};
os_init();
cnt = (NFFS_AREA_MAX / 2) - 3;
rc = flash_area_to_nffs_desc(FLASH_AREA_IMAGE_0, &cnt, descs);
img_starts[0] = 0;
total = cnt;
cnt = (NFFS_AREA_MAX / 2) - 3;
rc = flash_area_to_nffs_desc(FLASH_AREA_IMAGE_1, &cnt, &descs[total]);
assert(rc == 0);
img_starts[1] = total;
total += cnt;
cnt = 1;
rc = flash_area_to_nffs_desc(FLASH_AREA_IMAGE_SCRATCH, &cnt, &descs[total]);
assert(rc == 0);
req.br_scratch_area_idx = total;
total += 1;
req.br_num_image_areas = total;
for (cnt = 0; cnt < total; cnt++) {
img_areas[cnt] = cnt;
}
cnt = 6;
rc = flash_area_to_nffs_desc(FLASH_AREA_NFFS, &cnt, &descs[total]);
assert(rc == 0);
total += cnt;
nffs_config.nc_num_inodes = 50;
nffs_config.nc_num_blocks = 50;
nffs_config.nc_num_cache_blocks = 32;
rc = boot_go(&req, &rsp);
assert(rc == 0);
system_start((void *)(rsp.br_image_addr + rsp.br_hdr->ih_hdr_size));
return 0;
}
/**
* main
*
* The main function for the project. This function initializes the os, calls
* init_tasks to initialize tasks (and possibly other objects), then starts the
* OS. We should not return from os start.
*
* @return int NOTE: this function should never return!
*/
int
main(void)
{
int i;
int rc;
int cnt;
uint32_t seed;
struct nffs_area_desc descs[NFFS_AREA_MAX];
/* Initialize OS */
os_init();
/* Set cputime to count at 1 usec increments */
rc = cputime_init(1000000);
assert(rc == 0);
rc = os_mempool_init(&g_mbuf_mempool, MBUF_NUM_MBUFS,
MBUF_MEMBLOCK_SIZE, &g_mbuf_buffer[0], "mbuf_pool");
assert(rc == 0);
rc = os_mbuf_pool_init(&g_mbuf_pool, &g_mbuf_mempool, MBUF_MEMBLOCK_SIZE,
MBUF_NUM_MBUFS);
assert(rc == 0);
rc = os_msys_register(&g_mbuf_pool);
assert(rc == 0);
/* Dummy device address */
#if BLETEST_CFG_ROLE == BLETEST_ROLE_ADVERTISER
g_dev_addr[0] = 0x00;
g_dev_addr[1] = 0x00;
g_dev_addr[2] = 0x00;
g_dev_addr[3] = 0x88;
g_dev_addr[4] = 0x88;
g_dev_addr[5] = 0x08;
g_bletest_cur_peer_addr[0] = 0x00;
g_bletest_cur_peer_addr[1] = 0x00;
g_bletest_cur_peer_addr[2] = 0x00;
g_bletest_cur_peer_addr[3] = 0x99;
g_bletest_cur_peer_addr[4] = 0x99;
g_bletest_cur_peer_addr[5] = 0x09;
#else
g_dev_addr[0] = 0x00;
g_dev_addr[1] = 0x00;
g_dev_addr[2] = 0x00;
g_dev_addr[3] = 0x99;
g_dev_addr[4] = 0x99;
g_dev_addr[5] = 0x09;
g_bletest_cur_peer_addr[0] = 0x00;
g_bletest_cur_peer_addr[1] = 0x00;
g_bletest_cur_peer_addr[2] = 0x00;
g_bletest_cur_peer_addr[3] = 0x88;
g_bletest_cur_peer_addr[4] = 0x88;
g_bletest_cur_peer_addr[5] = 0x08;
#endif
/*
* Seed random number generator with least significant bytes of device
* address.
*/
seed = 0;
for (i = 0; i < 4; ++i) {
seed |= g_dev_addr[i];
seed <<= 8;
}
srand(seed);
/* Set the led pin as an output */
g_led_pin = LED_BLINK_PIN;
gpio_init_out(g_led_pin, 1);
/* Init the console */
rc = console_init(shell_console_rx_cb);
assert(rc == 0);
rc = hal_flash_init();
assert(rc == 0);
nffs_config.nc_num_inodes = 32;
nffs_config.nc_num_blocks = 64;
nffs_config.nc_num_files = 2;
nffs_config.nc_num_dirs = 2;
rc = nffs_init();
assert(rc == 0);
cnt = NFFS_AREA_MAX;
rc = flash_area_to_nffs_desc(FLASH_AREA_NFFS, &cnt, descs);
assert(rc == 0);
if (nffs_detect(descs) == FS_ECORRUPT) {
rc = nffs_format(descs);
assert(rc == 0);
}
shell_task_init(SHELL_TASK_PRIO, shell_stack, SHELL_TASK_STACK_SIZE,
SHELL_MAX_INPUT_LEN);
nmgr_task_init(NEWTMGR_TASK_PRIO, newtmgr_stack, NEWTMGR_TASK_STACK_SIZE);
imgmgr_module_init();
/* Init statistics module */
stats_module_init();
/* Init tasks */
init_tasks();
/* Start the OS */
os_start();
/* os start should never return. If it does, this should be an error */
assert(0);
return rc;
}
