static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
{
	int				ro;
	struct file			*filp = NULL;
	int				rc = -EINVAL;
	struct inode			*inode = NULL;
	loff_t				size;
	loff_t				num_sectors;
	loff_t				min_sectors;
	unsigned int			blkbits;
	unsigned int			blksize;

	/* R/W if we can, R/O if we must */
	ro = curlun->initially_ro;
	if (!ro) {
		filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
		if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES)
			ro = 1;
	}
	if (ro)
		filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0);
	if (IS_ERR(filp)) {
		LINFO(curlun, "unable to open backing file: %s\n", filename);
		return PTR_ERR(filp);
	}

	if (!(filp->f_mode & FMODE_WRITE))
		ro = 1;

	inode = file_inode(filp);
	if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) {
		LINFO(curlun, "invalid file type: %s\n", filename);
		goto out;
	}

	/*
	 * If we can't read the file, it's no good.
	 * If we can't write the file, use it read-only.
	 */
	if (!(filp->f_op->read || filp->f_op->aio_read)) {
		LINFO(curlun, "file not readable: %s\n", filename);
		goto out;
	}
	if (!(filp->f_op->write || filp->f_op->aio_write))
		ro = 1;

	size = i_size_read(inode->i_mapping->host);
	if (size < 0) {
		LINFO(curlun, "unable to find file size: %s\n", filename);
		rc = (int) size;
		goto out;
	}

	blksize = 512;
	blkbits = 9;


	num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
	min_sectors = 1;
	if (curlun->cdrom) {
               num_sectors &= ~3;      /* Reduce to a multiple of 2048 */
               min_sectors = 300*4;    /* Smallest track is 300 frames */
               if (num_sectors >= 256*60*75*4) {
                       num_sectors = (256*60*75 - 1) * 4;

			LINFO(curlun, "file too big: %s\n", filename);
			LINFO(curlun, "using only first %d blocks\n",
					(int) num_sectors);
		}
	}
	if (num_sectors < min_sectors) {
		LINFO(curlun, "file too small: %s\n", filename);
		rc = -ETOOSMALL;
		goto out;
	}

	if (fsg_lun_is_open(curlun))
		fsg_lun_close(curlun);

	curlun->blksize = blksize;
	curlun->blkbits = blkbits;
	curlun->ro = ro;
	curlun->filp = filp;
	curlun->file_length = size;
	curlun->num_sectors = num_sectors;
	LINFO(curlun, "open backing file: %s\n", filename);
	return 0;

out:
	fput(filp);
	return rc;
}
static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
{
	int				ro;
	struct file			*filp = NULL;
	int				rc = -EINVAL;
	struct inode			*inode = NULL;
	loff_t				size;
	loff_t				num_sectors;
	loff_t				min_sectors;
	unsigned int			blkbits;
	unsigned int			blksize;

	/* R/W if we can, R/O if we must */
	ro = curlun->initially_ro;
	if (!ro) {
		filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
		if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES)
			ro = 1;
	}
	if (ro)
		filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0);
	if (IS_ERR(filp)) {
		LINFO(curlun, "unable to open backing file: %s\n", filename);
		return PTR_ERR(filp);
	}

	if (!(filp->f_mode & FMODE_WRITE))
		ro = 1;

	inode = file_inode(filp);
	if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) {
		LINFO(curlun, "invalid file type: %s\n", filename);
		goto out;
	}

	/*
	 * If we can't read the file, it's no good.
	 * If we can't write the file, use it read-only.
	 */
	if (!(filp->f_op->read || filp->f_op->aio_read)) {
		LINFO(curlun, "file not readable: %s\n", filename);
		goto out;
	}
	if (!(filp->f_op->write || filp->f_op->aio_write))
		ro = 1;

	size = i_size_read(inode->i_mapping->host);
	if (size < 0) {
		LINFO(curlun, "unable to find file size: %s\n", filename);
		rc = (int) size;
		goto out;
	}

    /*
     * curlun->blksize remains the old value when switch from cdrom to udisk
     * so use the same blksie in cdrom and udisk
     */
#ifdef CONFIG_HUAWEI_USB
	if (inode->i_bdev) {
		blksize = bdev_logical_block_size(inode->i_bdev);
		blkbits = blksize_bits(blksize);
	} else {
		blksize = 512;
		blkbits = 9;
	}
#else
	if (curlun->cdrom) {
		blksize = 2048;
		blkbits = 11;
	} else if (inode->i_bdev) {
		blksize = bdev_logical_block_size(inode->i_bdev);
		blkbits = blksize_bits(blksize);
	} else {
		blksize = 512;
		blkbits = 9;
	}
#endif

	num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
	min_sectors = 1;

#ifndef CONFIG_HUAWEI_USB
	if (curlun->cdrom) {
		min_sectors = 300;	/* Smallest track is 300 frames */
		if (num_sectors >= 256*60*75) {
			num_sectors = 256*60*75 - 1;
			LINFO(curlun, "file too big: %s\n", filename);
			LINFO(curlun, "using only first %d blocks\n",
					(int) num_sectors);
		}
	}
#endif

	if (num_sectors < min_sectors) {
		LINFO(curlun, "file too small: %s\n", filename);
		rc = -ETOOSMALL;
		goto out;
	}

	if (fsg_lun_is_open(curlun))
		fsg_lun_close(curlun);

	curlun->blksize = blksize;
	curlun->blkbits = blkbits;
	curlun->ro = ro;
	curlun->filp = filp;
	curlun->file_length = size;
	curlun->num_sectors = num_sectors;
	LDBG(curlun, "open backing file: %s\n", filename);
	return 0;

out:
	fput(filp);
	return rc;
}
示例#3
0
static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
{
	int				ro;
	struct file			*filp = NULL;
	int				rc = -EINVAL;
	struct inode			*inode = NULL;
	struct backing_dev_info		*bdi;
	loff_t				size;
	loff_t				num_sectors;
	loff_t				min_sectors;
	unsigned int			blkbits;
	unsigned int			blksize;

	/* R/W if we can, R/O if we must */
	ro = curlun->initially_ro;
	if (!ro) {
		filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
		if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES)
			ro = 1;
	}
	if (ro)
		filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0);
	if (IS_ERR(filp)) {
		LINFO(curlun, "unable to open backing file: %s\n", filename);
		return PTR_ERR(filp);
	}

	if (!(filp->f_mode & FMODE_WRITE))
		ro = 1;

	inode = file_inode(filp);
	if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) {
		LINFO(curlun, "invalid file type: %s\n", filename);
		goto out;
	}

	/*
	 * If we can't read the file, it's no good.
	 * If we can't write the file, use it read-only.
	 */
	if (!(filp->f_op->read || filp->f_op->aio_read)) {
		LINFO(curlun, "file not readable: %s\n", filename);
		goto out;
	}
	if (!(filp->f_op->write || filp->f_op->aio_write))
		ro = 1;

	size = i_size_read(inode->i_mapping->host);
	if (size < 0) {
		LINFO(curlun, "unable to find file size: %s\n", filename);
		rc = (int) size;
		goto out;
	}

	if (curlun->cdrom) {
		blksize = 2048;
		blkbits = 11;
	} else if (inode->i_bdev) {
		blksize = bdev_logical_block_size(inode->i_bdev);
		blkbits = blksize_bits(blksize);

		bdi = &inode->i_bdev->bd_queue->backing_dev_info;
		if (bdi->capabilities & BDI_CAP_STRICTLIMIT) {
			curlun->max_ratio = bdi->max_ratio;
			curlun->nofua = 1;

			if (bdi_set_max_ratio(bdi, uicc_ums_max_ratio))
				pr_debug("%s, error in setting max_ratio\n",
						__func__);
		}
	} else {
		blksize = 512;
		blkbits = 9;
	}

	num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
	min_sectors = 1;
	if (curlun->cdrom) {
		min_sectors = 300;	/* Smallest track is 300 frames */
		if (num_sectors >= 256*60*75) {
			num_sectors = 256*60*75 - 1;
			LINFO(curlun, "file too big: %s\n", filename);
			LINFO(curlun, "using only first %d blocks\n",
					(int) num_sectors);
		}
	}
	if (num_sectors < min_sectors) {
		LINFO(curlun, "file too small: %s\n", filename);
		rc = -ETOOSMALL;
		goto out;
	}

	if (fsg_lun_is_open(curlun))
		fsg_lun_close(curlun);

	curlun->blksize = blksize;
	curlun->blkbits = blkbits;
	curlun->ro = ro;
	curlun->filp = filp;
	curlun->file_length = size;
	curlun->num_sectors = num_sectors;

	LDBG(curlun, "open backing file: %s\n", filename);
	return 0;

out:
	fput(filp);
	return rc;
}