C++ (Cpp) gpmc_smsc911x_init示例

示例#1

文件： board-cm-t35.c 项目： 0xroot/Blackphone-BP1-Kernel

static void __init cm_t35_init_ethernet(void)
{
	regulator_register_fixed(0, cm_t35_smsc911x_supplies,
				 ARRAY_SIZE(cm_t35_smsc911x_supplies));
	regulator_register_fixed(1, sb_t35_smsc911x_supplies,
				 ARRAY_SIZE(sb_t35_smsc911x_supplies));

	gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
	gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
}

示例#2

文件： board-omap3evm.c 项目： aywq2008/omniplay

static inline void __init omap3evm_init_smsc911x(void)
{
	/* Configure ethernet controller reset gpio */
	if (cpu_is_omap3430()) {
		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST;
		else
			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST;
	}

	gpmc_smsc911x_init(&smsc911x_cfg);
}

示例#3

文件： board-omap3stalker.c 项目： KCFTech/Linux_3_2_0-26_Kernel

static inline void __init omap3stalker_init_eth(void)
{
	struct clk *l3ck;
	unsigned int rate;

	l3ck = clk_get(NULL, "l3_ck");
	if (IS_ERR(l3ck))
		rate = 100000000;
	else
		rate = clk_get_rate(l3ck);

	omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
	gpmc_smsc911x_init(&smsc911x_cfg);
}

示例#4

文件： board-omap3logic.c 项目： GerardGarcia/linux

static inline void __init board_smsc911x_init(void)
{
	if (machine_is_omap3530_lv_som()) {
		/* OMAP3530 LV SOM board */
		board_smsc911x_data.gpio_irq =
					OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ;
		omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT);
	} else if (machine_is_omap3_torpedo()) {
		/* OMAP3 Torpedo board */
		board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ;
		omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT);
	} else {
		/* unsupported board */
		printk(KERN_ERR "%s(): unknown machine type\n", __func__);
		return;
	}

	gpmc_smsc911x_init(&board_smsc911x_data);
}

示例#5

文件： board-omap3evm.c 项目： PivotalBigData/PivotalHD

static inline void __init omap3evm_init_smsc911x(void)
{
	struct clk *l3ck;
	unsigned int rate;

	l3ck = clk_get(NULL, "l3_ck");
	if (IS_ERR(l3ck))
		rate = 100000000;
	else
		rate = clk_get_rate(l3ck);

	/* Configure ethernet controller reset gpio */
	if (cpu_is_omap3430()) {
		if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1)
			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST;
		else
			smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST;
	}

	gpmc_smsc911x_init(&smsc911x_cfg);
}

示例#6

文件： board-overo.c 项目： KCFTech/Linux_3_2_0-26_Kernel

static void __init overo_init_smsc911x(void)
{
	gpmc_smsc911x_init(&smsc911x_cfg);
	gpmc_smsc911x_init(&smsc911x2_cfg);
}

示例#7

文件： board-omap3stalker.c 项目： 0x00evil/linux

static inline void __init omap3stalker_init_eth(void)
{
	omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
	gpmc_smsc911x_init(&smsc911x_cfg);
}

示例#8

文件： board-igep0020.c 项目： 0x000000FF/Linux4Edison

static inline void __init igep2_init_smsc911x(void)
{
	gpmc_smsc911x_init(&smsc911x_cfg);
}

示例#9

文件： board-zoom-debugboard.c 项目： 03199618/linux

static inline void __init zoom_init_smsc911x(void)
{
	gpmc_smsc911x_init(&zoom_smsc911x_cfg);
}

示例#10

文件： board-cm-t35.c 项目： ClarkChen633/am335x-linux

static void __init cm_t35_init_ethernet(void)
{
	gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
	gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
}

示例#11

文件： board-omap4pcm049.c 项目： ClarkChen633/am335x-linux

static inline void __init pcm049_init_smsc911x(void)
{
	omap_mux_init_gpio(OMAP4_PCM049_ETH_GPIO_IRQ, OMAP_PIN_INPUT);
	gpmc_smsc911x_init(&board_smsc911x_data);
}