void hostapd_notify_assoc_fils_finish(struct hostapd_data *hapd,
struct sta_info *sta)
{
u16 reply_res = WLAN_STATUS_SUCCESS;
struct ieee802_11_elems elems;
u8 buf[IEEE80211_MAX_MMPDU_SIZE], *p = buf;
int new_assoc;
wpa_printf(MSG_DEBUG, "%s FILS: Finish association with " MACSTR,
__func__, MAC2STR(sta->addr));
eloop_cancel_timeout(fils_hlp_timeout, hapd, sta);
if (!sta->fils_pending_assoc_req)
return;
ieee802_11_parse_elems(sta->fils_pending_assoc_req,
sta->fils_pending_assoc_req_len, &elems, 0);
if (!elems.fils_session) {
wpa_printf(MSG_DEBUG, "%s failed to find FILS Session element",
__func__);
return;
}
p = hostapd_eid_assoc_fils_session(sta->wpa_sm, p,
elems.fils_session,
sta->fils_hlp_resp);
reply_res = hostapd_sta_assoc(hapd, sta->addr,
sta->fils_pending_assoc_is_reassoc,
WLAN_STATUS_SUCCESS,
buf, p - buf);
ap_sta_set_authorized(hapd, sta, 1);
new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
sta->flags &= ~WLAN_STA_WNM_SLEEP_MODE;
hostapd_set_sta_flags(hapd, sta);
wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC_FILS);
ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);
hostapd_new_assoc_sta(hapd, sta, !new_assoc);
os_free(sta->fils_pending_assoc_req);
sta->fils_pending_assoc_req = NULL;
sta->fils_pending_assoc_req_len = 0;
wpabuf_free(sta->fils_hlp_resp);
sta->fils_hlp_resp = NULL;
wpabuf_free(sta->hlp_dhcp_discover);
sta->hlp_dhcp_discover = NULL;
fils_hlp_deinit(hapd);
/*
* Remove the station in case transmission of a success response fails
* (the STA was added associated to the driver) or if the station was
* previously added unassociated.
*/
if (reply_res != WLAN_STATUS_SUCCESS || sta->added_unassoc) {
hostapd_drv_sta_remove(hapd, sta->addr);
sta->added_unassoc = 0;
}
}
int hostapd_notif_assoc(struct hostapd_data *hapd, const u8 *addr,
const u8 *req_ies, size_t req_ies_len, int reassoc)
{
struct sta_info *sta;
int new_assoc, res;
struct ieee802_11_elems elems;
const u8 *ie;
size_t ielen;
#ifdef CONFIG_IEEE80211R
u8 buf[sizeof(struct ieee80211_mgmt) + 1024];
u8 *p = buf;
#endif /* CONFIG_IEEE80211R */
u16 reason = WLAN_REASON_UNSPECIFIED;
u16 status = WLAN_STATUS_SUCCESS;
const u8 *p2p_dev_addr = NULL;
if (addr == NULL) {
/*
* This could potentially happen with unexpected event from the
* driver wrapper. This was seen at least in one case where the
* driver ended up being set to station mode while hostapd was
* running, so better make sure we stop processing such an
* event here.
*/
wpa_printf(MSG_DEBUG, "hostapd_notif_assoc: Skip event with "
"no address");
return -1;
}
random_add_randomness(addr, ETH_ALEN);
hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "associated");
ieee802_11_parse_elems(req_ies, req_ies_len, &elems, 0);
if (elems.wps_ie) {
ie = elems.wps_ie - 2;
ielen = elems.wps_ie_len + 2;
wpa_printf(MSG_DEBUG, "STA included WPS IE in (Re)AssocReq");
} else if (elems.rsn_ie) {
ie = elems.rsn_ie - 2;
ielen = elems.rsn_ie_len + 2;
wpa_printf(MSG_DEBUG, "STA included RSN IE in (Re)AssocReq");
} else if (elems.wpa_ie) {
ie = elems.wpa_ie - 2;
ielen = elems.wpa_ie_len + 2;
wpa_printf(MSG_DEBUG, "STA included WPA IE in (Re)AssocReq");
#ifdef CONFIG_HS20
} else if (elems.osen) {
ie = elems.osen - 2;
ielen = elems.osen_len + 2;
wpa_printf(MSG_DEBUG, "STA included OSEN IE in (Re)AssocReq");
#endif /* CONFIG_HS20 */
} else {
ie = NULL;
ielen = 0;
wpa_printf(MSG_DEBUG, "STA did not include WPS/RSN/WPA IE in "
"(Re)AssocReq");
}
sta = ap_get_sta(hapd, addr);
if (sta) {
ap_sta_no_session_timeout(hapd, sta);
accounting_sta_stop(hapd, sta);
/*
* Make sure that the previously registered inactivity timer
* will not remove the STA immediately.
*/
sta->timeout_next = STA_NULLFUNC;
} else {
sta = ap_sta_add(hapd, addr);
if (sta == NULL) {
hostapd_drv_sta_disassoc(hapd, addr,
WLAN_REASON_DISASSOC_AP_BUSY);
return -1;
}
}
sta->flags &= ~(WLAN_STA_WPS | WLAN_STA_MAYBE_WPS | WLAN_STA_WPS2);
#ifdef CONFIG_P2P
if (elems.p2p) {
wpabuf_free(sta->p2p_ie);
sta->p2p_ie = ieee802_11_vendor_ie_concat(req_ies, req_ies_len,
P2P_IE_VENDOR_TYPE);
if (sta->p2p_ie)
p2p_dev_addr = p2p_get_go_dev_addr(sta->p2p_ie);
}
#endif /* CONFIG_P2P */
#ifdef CONFIG_IEEE80211N
#ifdef NEED_AP_MLME
if (elems.ht_capabilities &&
elems.ht_capabilities_len >=
sizeof(struct ieee80211_ht_capabilities) &&
(hapd->iface->conf->ht_capab &
HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET)) {
struct ieee80211_ht_capabilities *ht_cap =
(struct ieee80211_ht_capabilities *)
elems.ht_capabilities;
if (le_to_host16(ht_cap->ht_capabilities_info) &
HT_CAP_INFO_40MHZ_INTOLERANT)
ht40_intolerant_add(hapd->iface, sta);
}
#endif /* NEED_AP_MLME */
#endif /* CONFIG_IEEE80211N */
#ifdef CONFIG_INTERWORKING
if (elems.ext_capab && elems.ext_capab_len > 4) {
if (elems.ext_capab[4] & 0x01)
sta->qos_map_enabled = 1;
}
#endif /* CONFIG_INTERWORKING */
#ifdef CONFIG_HS20
wpabuf_free(sta->hs20_ie);
if (elems.hs20 && elems.hs20_len > 4) {
sta->hs20_ie = wpabuf_alloc_copy(elems.hs20 + 4,
elems.hs20_len - 4);
} else
sta->hs20_ie = NULL;
#endif /* CONFIG_HS20 */
#ifdef CONFIG_MTK_P2P
if (elems.wfd && (elems.wfd_len > 0)) {
struct p2p_message msg;
wpabuf_free(sta->wfd_ie);
sta->wfd_ie = ieee802_11_vendor_ie_concat(req_ies, req_ies_len,
WFD_IE_VENDOR_TYPE);
if(p2p_parse_wfd_ie(sta->wfd_ie,&msg)==0) {
wpa_printf(MSG_DEBUG, "Change our WFD role and peer wfd_ie");
if(hapd->p2p) {
wpa_printf(MSG_DEBUG, "Change our WFD role and peer wfd_ie 2");
wfd_process_request_and_switch_role(hapd->p2p, &msg, 0);
}
}
}
#endif /* CONFIG_MTK_P2P */
if (hapd->conf->wpa) {
if (ie == NULL || ielen == 0) {
#ifdef CONFIG_WPS
if (hapd->conf->wps_state) {
wpa_printf(MSG_DEBUG, "STA did not include "
"WPA/RSN IE in (Re)Association "
"Request - possible WPS use");
sta->flags |= WLAN_STA_MAYBE_WPS;
goto skip_wpa_check;
}
#endif /* CONFIG_WPS */
wpa_printf(MSG_DEBUG, "No WPA/RSN IE from STA");
return -1;
}
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && ie[0] == 0xdd && ie[1] >= 4 &&
os_memcmp(ie + 2, "\x00\x50\xf2\x04", 4) == 0) {
struct wpabuf *wps;
sta->flags |= WLAN_STA_WPS;
wps = ieee802_11_vendor_ie_concat(ie, ielen,
WPS_IE_VENDOR_TYPE);
if (wps) {
if (wps_is_20(wps)) {
wpa_printf(MSG_DEBUG, "WPS: STA "
"supports WPS 2.0");
sta->flags |= WLAN_STA_WPS2;
}
wpabuf_free(wps);
}
goto skip_wpa_check;
}
#endif /* CONFIG_WPS */
if (sta->wpa_sm == NULL)
sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth,
sta->addr,
p2p_dev_addr);
if (sta->wpa_sm == NULL) {
wpa_printf(MSG_ERROR, "Failed to initialize WPA state "
"machine");
return -1;
}
res = wpa_validate_wpa_ie(hapd->wpa_auth, sta->wpa_sm,
ie, ielen,
elems.mdie, elems.mdie_len);
if (res != WPA_IE_OK) {
wpa_printf(MSG_DEBUG, "WPA/RSN information element "
"rejected? (res %u)", res);
wpa_hexdump(MSG_DEBUG, "IE", ie, ielen);
if (res == WPA_INVALID_GROUP) {
reason = WLAN_REASON_GROUP_CIPHER_NOT_VALID;
status = WLAN_STATUS_GROUP_CIPHER_NOT_VALID;
} else if (res == WPA_INVALID_PAIRWISE) {
reason = WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID;
status = WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID;
} else if (res == WPA_INVALID_AKMP) {
reason = WLAN_REASON_AKMP_NOT_VALID;
status = WLAN_STATUS_AKMP_NOT_VALID;
}
#ifdef CONFIG_IEEE80211W
else if (res == WPA_MGMT_FRAME_PROTECTION_VIOLATION) {
reason = WLAN_REASON_INVALID_IE;
status = WLAN_STATUS_INVALID_IE;
} else if (res == WPA_INVALID_MGMT_GROUP_CIPHER) {
reason = WLAN_REASON_GROUP_CIPHER_NOT_VALID;
status = WLAN_STATUS_GROUP_CIPHER_NOT_VALID;
}
#endif /* CONFIG_IEEE80211W */
else {
reason = WLAN_REASON_INVALID_IE;
status = WLAN_STATUS_INVALID_IE;
}
goto fail;
}
#ifdef CONFIG_IEEE80211W
if ((sta->flags & WLAN_STA_MFP) && !sta->sa_query_timed_out &&
sta->sa_query_count > 0)
ap_check_sa_query_timeout(hapd, sta);
if ((sta->flags & WLAN_STA_MFP) && !sta->sa_query_timed_out &&
(sta->auth_alg != WLAN_AUTH_FT)) {
/*
* STA has already been associated with MFP and SA
* Query timeout has not been reached. Reject the
* association attempt temporarily and start SA Query,
* if one is not pending.
*/
if (sta->sa_query_count == 0)
ap_sta_start_sa_query(hapd, sta);
#ifdef CONFIG_IEEE80211R
status = WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY;
p = hostapd_eid_assoc_comeback_time(hapd, sta, p);
hostapd_sta_assoc(hapd, addr, reassoc, status, buf,
p - buf);
#endif /* CONFIG_IEEE80211R */
return 0;
}
if (wpa_auth_uses_mfp(sta->wpa_sm))
sta->flags |= WLAN_STA_MFP;
else
sta->flags &= ~WLAN_STA_MFP;
#endif /* CONFIG_IEEE80211W */
#ifdef CONFIG_IEEE80211R
if (sta->auth_alg == WLAN_AUTH_FT) {
status = wpa_ft_validate_reassoc(sta->wpa_sm, req_ies,
req_ies_len);
if (status != WLAN_STATUS_SUCCESS) {
if (status == WLAN_STATUS_INVALID_PMKID)
reason = WLAN_REASON_INVALID_IE;
if (status == WLAN_STATUS_INVALID_MDIE)
reason = WLAN_REASON_INVALID_IE;
if (status == WLAN_STATUS_INVALID_FTIE)
reason = WLAN_REASON_INVALID_IE;
goto fail;
}
}
#endif /* CONFIG_IEEE80211R */
} else if (hapd->conf->wps_state) {
#ifdef CONFIG_WPS
struct wpabuf *wps;
if (req_ies)
wps = ieee802_11_vendor_ie_concat(req_ies, req_ies_len,
WPS_IE_VENDOR_TYPE);
else
wps = NULL;
#ifdef CONFIG_WPS_STRICT
if (wps && wps_validate_assoc_req(wps) < 0) {
reason = WLAN_REASON_INVALID_IE;
status = WLAN_STATUS_INVALID_IE;
wpabuf_free(wps);
goto fail;
}
#endif /* CONFIG_WPS_STRICT */
if (wps) {
sta->flags |= WLAN_STA_WPS;
if (wps_is_20(wps)) {
wpa_printf(MSG_DEBUG, "WPS: STA supports "
"WPS 2.0");
sta->flags |= WLAN_STA_WPS2;
}
} else
sta->flags |= WLAN_STA_MAYBE_WPS;
wpabuf_free(wps);
#endif /* CONFIG_WPS */
#ifdef CONFIG_HS20
} else if (hapd->conf->osen) {
if (elems.osen == NULL) {
hostapd_logger(
hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO,
"No HS 2.0 OSEN element in association request");
return WLAN_STATUS_INVALID_IE;
}
wpa_printf(MSG_DEBUG, "HS 2.0: OSEN association");
if (sta->wpa_sm == NULL)
sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth,
sta->addr, NULL);
if (sta->wpa_sm == NULL) {
wpa_printf(MSG_WARNING, "Failed to initialize WPA "
"state machine");
return WLAN_STATUS_UNSPECIFIED_FAILURE;
}
if (wpa_validate_osen(hapd->wpa_auth, sta->wpa_sm,
elems.osen - 2, elems.osen_len + 2) < 0)
return WLAN_STATUS_INVALID_IE;
#endif /* CONFIG_HS20 */
}
#ifdef CONFIG_WPS
skip_wpa_check:
#endif /* CONFIG_WPS */
#ifdef CONFIG_IEEE80211R
p = wpa_sm_write_assoc_resp_ies(sta->wpa_sm, buf, sizeof(buf),
sta->auth_alg, req_ies, req_ies_len);
hostapd_sta_assoc(hapd, addr, reassoc, status, buf, p - buf);
if (sta->auth_alg == WLAN_AUTH_FT)
ap_sta_set_authorized(hapd, sta, 1);
#else /* CONFIG_IEEE80211R */
/* Keep compiler silent about unused variables */
if (status) {
}
#endif /* CONFIG_IEEE80211R */
new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
sta->flags &= ~WLAN_STA_WNM_SLEEP_MODE;
hostapd_set_sta_flags(hapd, sta);
if (reassoc && (sta->auth_alg == WLAN_AUTH_FT))
wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC_FT);
else
wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC);
hostapd_new_assoc_sta(hapd, sta, !new_assoc);
/*
[ALPS00326459][6575JB][BSP Package][6577JB][CTS Verifier 4.1_r2][MT6577_PHONE][changelist 996001]
GROUP JOIN 2 cases fail in Wi-Fi Direct Test
*/
#if defined(CONFIG_MTK_P2P) || defined(CONFIG_HOTSPOT_MGR_SUPPORT)
if ((!hapd->conf->ieee802_1x && !hapd->conf->wpa) ||
sta->auth_alg == WLAN_AUTH_FT) {
/*
* Open, static WEP, or FT protocol; no separate authorization
* step.
*/
wpa_msg(hapd->msg_ctx, MSG_INFO,
AP_STA_CONNECTED MACSTR, MAC2STR(sta->addr));
}
#endif /* CONFIG_MTK_P2P || CONFIG_HOTSPOT_MGR_SUPPORT */
ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);
#ifdef CONFIG_P2P
if (req_ies) {
p2p_group_notif_assoc(hapd->p2p_group, sta->addr,
req_ies, req_ies_len);
}
#endif /* CONFIG_P2P */
return 0;
fail:
#ifdef CONFIG_IEEE80211R
hostapd_sta_assoc(hapd, addr, reassoc, status, buf, p - buf);
#endif /* CONFIG_IEEE80211R */
hostapd_drv_sta_disassoc(hapd, sta->addr, reason);
ap_free_sta(hapd, sta);
return -1;
}
int hostapd_notif_assoc(struct hostapd_data *hapd, const u8 *addr,
const u8 *req_ies, size_t req_ies_len, int reassoc)
{
struct sta_info *sta;
int new_assoc, res;
struct ieee802_11_elems elems;
const u8 *ie;
size_t ielen;
#if defined(CONFIG_IEEE80211R) || defined(CONFIG_IEEE80211W)
u8 buf[sizeof(struct ieee80211_mgmt) + 1024];
u8 *p = buf;
#endif /* CONFIG_IEEE80211R || CONFIG_IEEE80211W */
u16 reason = WLAN_REASON_UNSPECIFIED;
u16 status = WLAN_STATUS_SUCCESS;
const u8 *p2p_dev_addr = NULL;
if (addr == NULL) {
/*
* This could potentially happen with unexpected event from the
* driver wrapper. This was seen at least in one case where the
* driver ended up being set to station mode while hostapd was
* running, so better make sure we stop processing such an
* event here.
*/
wpa_printf(MSG_DEBUG,
"hostapd_notif_assoc: Skip event with no address");
return -1;
}
random_add_randomness(addr, ETH_ALEN);
hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO, "associated");
ieee802_11_parse_elems(req_ies, req_ies_len, &elems, 0);
if (elems.wps_ie) {
ie = elems.wps_ie - 2;
ielen = elems.wps_ie_len + 2;
wpa_printf(MSG_DEBUG, "STA included WPS IE in (Re)AssocReq");
} else if (elems.rsn_ie) {
ie = elems.rsn_ie - 2;
ielen = elems.rsn_ie_len + 2;
wpa_printf(MSG_DEBUG, "STA included RSN IE in (Re)AssocReq");
} else if (elems.wpa_ie) {
ie = elems.wpa_ie - 2;
ielen = elems.wpa_ie_len + 2;
wpa_printf(MSG_DEBUG, "STA included WPA IE in (Re)AssocReq");
#ifdef CONFIG_HS20
} else if (elems.osen) {
ie = elems.osen - 2;
ielen = elems.osen_len + 2;
wpa_printf(MSG_DEBUG, "STA included OSEN IE in (Re)AssocReq");
#endif /* CONFIG_HS20 */
} else {
ie = NULL;
ielen = 0;
wpa_printf(MSG_DEBUG,
"STA did not include WPS/RSN/WPA IE in (Re)AssocReq");
}
sta = ap_get_sta(hapd, addr);
if (sta) {
ap_sta_no_session_timeout(hapd, sta);
accounting_sta_stop(hapd, sta);
/*
* Make sure that the previously registered inactivity timer
* will not remove the STA immediately.
*/
sta->timeout_next = STA_NULLFUNC;
} else {
sta = ap_sta_add(hapd, addr);
if (sta == NULL) {
hostapd_drv_sta_disassoc(hapd, addr,
WLAN_REASON_DISASSOC_AP_BUSY);
return -1;
}
}
sta->flags &= ~(WLAN_STA_WPS | WLAN_STA_MAYBE_WPS | WLAN_STA_WPS2);
/*
* ACL configurations to the drivers (implementing AP SME and ACL
* offload) without hostapd's knowledge, can result in a disconnection
* though the driver accepts the connection. Skip the hostapd check for
* ACL if the driver supports ACL offload to avoid potentially
* conflicting ACL rules.
*/
if (hapd->iface->drv_max_acl_mac_addrs == 0 &&
hostapd_check_acl(hapd, addr, NULL) != HOSTAPD_ACL_ACCEPT) {
wpa_printf(MSG_INFO, "STA " MACSTR " not allowed to connect",
MAC2STR(addr));
reason = WLAN_REASON_UNSPECIFIED;
goto fail;
}
#ifdef CONFIG_P2P
if (elems.p2p) {
wpabuf_free(sta->p2p_ie);
sta->p2p_ie = ieee802_11_vendor_ie_concat(req_ies, req_ies_len,
P2P_IE_VENDOR_TYPE);
if (sta->p2p_ie)
p2p_dev_addr = p2p_get_go_dev_addr(sta->p2p_ie);
}
#endif /* CONFIG_P2P */
#ifdef CONFIG_IEEE80211N
#ifdef NEED_AP_MLME
if (elems.ht_capabilities &&
(hapd->iface->conf->ht_capab &
HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET)) {
struct ieee80211_ht_capabilities *ht_cap =
(struct ieee80211_ht_capabilities *)
elems.ht_capabilities;
if (le_to_host16(ht_cap->ht_capabilities_info) &
HT_CAP_INFO_40MHZ_INTOLERANT)
ht40_intolerant_add(hapd->iface, sta);
}
#endif /* NEED_AP_MLME */
#endif /* CONFIG_IEEE80211N */
#ifdef CONFIG_INTERWORKING
if (elems.ext_capab && elems.ext_capab_len > 4) {
if (elems.ext_capab[4] & 0x01)
sta->qos_map_enabled = 1;
}
#endif /* CONFIG_INTERWORKING */
#ifdef CONFIG_HS20
wpabuf_free(sta->hs20_ie);
if (elems.hs20 && elems.hs20_len > 4) {
sta->hs20_ie = wpabuf_alloc_copy(elems.hs20 + 4,
elems.hs20_len - 4);
} else
sta->hs20_ie = NULL;
#endif /* CONFIG_HS20 */
#ifdef CONFIG_FST
wpabuf_free(sta->mb_ies);
if (hapd->iface->fst)
sta->mb_ies = mb_ies_by_info(&elems.mb_ies);
else
sta->mb_ies = NULL;
#endif /* CONFIG_FST */
mbo_ap_check_sta_assoc(hapd, sta, &elems);
ap_copy_sta_supp_op_classes(sta, elems.supp_op_classes,
elems.supp_op_classes_len);
if (hapd->conf->wpa) {
if (ie == NULL || ielen == 0) {
#ifdef CONFIG_WPS
if (hapd->conf->wps_state) {
wpa_printf(MSG_DEBUG,
"STA did not include WPA/RSN IE in (Re)Association Request - possible WPS use");
sta->flags |= WLAN_STA_MAYBE_WPS;
goto skip_wpa_check;
}
#endif /* CONFIG_WPS */
wpa_printf(MSG_DEBUG, "No WPA/RSN IE from STA");
return -1;
}
#ifdef CONFIG_WPS
if (hapd->conf->wps_state && ie[0] == 0xdd && ie[1] >= 4 &&
os_memcmp(ie + 2, "\x00\x50\xf2\x04", 4) == 0) {
struct wpabuf *wps;
sta->flags |= WLAN_STA_WPS;
wps = ieee802_11_vendor_ie_concat(ie, ielen,
WPS_IE_VENDOR_TYPE);
if (wps) {
if (wps_is_20(wps)) {
wpa_printf(MSG_DEBUG,
"WPS: STA supports WPS 2.0");
sta->flags |= WLAN_STA_WPS2;
}
wpabuf_free(wps);
}
goto skip_wpa_check;
}
#endif /* CONFIG_WPS */
if (sta->wpa_sm == NULL)
sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth,
sta->addr,
p2p_dev_addr);
if (sta->wpa_sm == NULL) {
wpa_printf(MSG_ERROR,
"Failed to initialize WPA state machine");
return -1;
}
res = wpa_validate_wpa_ie(hapd->wpa_auth, sta->wpa_sm,
ie, ielen,
elems.mdie, elems.mdie_len);
if (res != WPA_IE_OK) {
wpa_printf(MSG_DEBUG,
"WPA/RSN information element rejected? (res %u)",
res);
wpa_hexdump(MSG_DEBUG, "IE", ie, ielen);
if (res == WPA_INVALID_GROUP) {
reason = WLAN_REASON_GROUP_CIPHER_NOT_VALID;
status = WLAN_STATUS_GROUP_CIPHER_NOT_VALID;
} else if (res == WPA_INVALID_PAIRWISE) {
reason = WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID;
status = WLAN_STATUS_PAIRWISE_CIPHER_NOT_VALID;
} else if (res == WPA_INVALID_AKMP) {
reason = WLAN_REASON_AKMP_NOT_VALID;
status = WLAN_STATUS_AKMP_NOT_VALID;
}
#ifdef CONFIG_IEEE80211W
else if (res == WPA_MGMT_FRAME_PROTECTION_VIOLATION) {
reason = WLAN_REASON_INVALID_IE;
status = WLAN_STATUS_INVALID_IE;
} else if (res == WPA_INVALID_MGMT_GROUP_CIPHER) {
reason = WLAN_REASON_GROUP_CIPHER_NOT_VALID;
status = WLAN_STATUS_GROUP_CIPHER_NOT_VALID;
}
#endif /* CONFIG_IEEE80211W */
else {
reason = WLAN_REASON_INVALID_IE;
status = WLAN_STATUS_INVALID_IE;
}
goto fail;
}
#ifdef CONFIG_IEEE80211W
if ((sta->flags & WLAN_STA_MFP) && !sta->sa_query_timed_out &&
sta->sa_query_count > 0)
ap_check_sa_query_timeout(hapd, sta);
if ((sta->flags & WLAN_STA_MFP) && !sta->sa_query_timed_out &&
(sta->auth_alg != WLAN_AUTH_FT)) {
/*
* STA has already been associated with MFP and SA
* Query timeout has not been reached. Reject the
* association attempt temporarily and start SA Query,
* if one is not pending.
*/
if (sta->sa_query_count == 0)
ap_sta_start_sa_query(hapd, sta);
status = WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY;
p = hostapd_eid_assoc_comeback_time(hapd, sta, p);
hostapd_sta_assoc(hapd, addr, reassoc, status, buf,
p - buf);
return 0;
}
if (wpa_auth_uses_mfp(sta->wpa_sm))
sta->flags |= WLAN_STA_MFP;
else
sta->flags &= ~WLAN_STA_MFP;
#endif /* CONFIG_IEEE80211W */
#ifdef CONFIG_IEEE80211R
if (sta->auth_alg == WLAN_AUTH_FT) {
status = wpa_ft_validate_reassoc(sta->wpa_sm, req_ies,
req_ies_len);
if (status != WLAN_STATUS_SUCCESS) {
if (status == WLAN_STATUS_INVALID_PMKID)
reason = WLAN_REASON_INVALID_IE;
if (status == WLAN_STATUS_INVALID_MDIE)
reason = WLAN_REASON_INVALID_IE;
if (status == WLAN_STATUS_INVALID_FTIE)
reason = WLAN_REASON_INVALID_IE;
goto fail;
}
}
#endif /* CONFIG_IEEE80211R */
} else if (hapd->conf->wps_state) {
#ifdef CONFIG_WPS
struct wpabuf *wps;
if (req_ies)
wps = ieee802_11_vendor_ie_concat(req_ies, req_ies_len,
WPS_IE_VENDOR_TYPE);
else
wps = NULL;
#ifdef CONFIG_WPS_STRICT
if (wps && wps_validate_assoc_req(wps) < 0) {
reason = WLAN_REASON_INVALID_IE;
status = WLAN_STATUS_INVALID_IE;
wpabuf_free(wps);
goto fail;
}
#endif /* CONFIG_WPS_STRICT */
if (wps) {
sta->flags |= WLAN_STA_WPS;
if (wps_is_20(wps)) {
wpa_printf(MSG_DEBUG,
"WPS: STA supports WPS 2.0");
sta->flags |= WLAN_STA_WPS2;
}
} else
sta->flags |= WLAN_STA_MAYBE_WPS;
wpabuf_free(wps);
#endif /* CONFIG_WPS */
#ifdef CONFIG_HS20
} else if (hapd->conf->osen) {
if (elems.osen == NULL) {
hostapd_logger(
hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_INFO,
"No HS 2.0 OSEN element in association request");
return WLAN_STATUS_INVALID_IE;
}
wpa_printf(MSG_DEBUG, "HS 2.0: OSEN association");
if (sta->wpa_sm == NULL)
sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth,
sta->addr, NULL);
if (sta->wpa_sm == NULL) {
wpa_printf(MSG_WARNING,
"Failed to initialize WPA state machine");
return WLAN_STATUS_UNSPECIFIED_FAILURE;
}
if (wpa_validate_osen(hapd->wpa_auth, sta->wpa_sm,
elems.osen - 2, elems.osen_len + 2) < 0)
return WLAN_STATUS_INVALID_IE;
#endif /* CONFIG_HS20 */
}
#ifdef CONFIG_MBO
if (hapd->conf->mbo_enabled && (hapd->conf->wpa & 2) &&
elems.mbo && sta->cell_capa && !(sta->flags & WLAN_STA_MFP) &&
hapd->conf->ieee80211w != NO_MGMT_FRAME_PROTECTION) {
wpa_printf(MSG_INFO,
"MBO: Reject WPA2 association without PMF");
return WLAN_STATUS_UNSPECIFIED_FAILURE;
}
#endif /* CONFIG_MBO */
#ifdef CONFIG_WPS
skip_wpa_check:
#endif /* CONFIG_WPS */
#ifdef CONFIG_IEEE80211R
p = wpa_sm_write_assoc_resp_ies(sta->wpa_sm, buf, sizeof(buf),
sta->auth_alg, req_ies, req_ies_len);
hostapd_sta_assoc(hapd, addr, reassoc, status, buf, p - buf);
if (sta->auth_alg == WLAN_AUTH_FT)
ap_sta_set_authorized(hapd, sta, 1);
#else /* CONFIG_IEEE80211R */
/* Keep compiler silent about unused variables */
if (status) {
}
#endif /* CONFIG_IEEE80211R */
new_assoc = (sta->flags & WLAN_STA_ASSOC) == 0;
sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC;
sta->flags &= ~WLAN_STA_WNM_SLEEP_MODE;
hostapd_set_sta_flags(hapd, sta);
if (reassoc && (sta->auth_alg == WLAN_AUTH_FT))
wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC_FT);
else
wpa_auth_sm_event(sta->wpa_sm, WPA_ASSOC);
hostapd_new_assoc_sta(hapd, sta, !new_assoc);
ieee802_1x_notify_port_enabled(sta->eapol_sm, 1);
#ifdef CONFIG_P2P
if (req_ies) {
p2p_group_notif_assoc(hapd->p2p_group, sta->addr,
req_ies, req_ies_len);
}
#endif /* CONFIG_P2P */
return 0;
fail:
#ifdef CONFIG_IEEE80211R
hostapd_sta_assoc(hapd, addr, reassoc, status, buf, p - buf);
#endif /* CONFIG_IEEE80211R */
hostapd_drv_sta_disassoc(hapd, sta->addr, reason);
ap_free_sta(hapd, sta);
return -1;
}
