int
iq80321_attach(device_t dev)
{
struct i80321_softc *sc = device_get_softc(dev);
int b0u, b0l, b1u, b1l;
vm_paddr_t memstart = 0;
vm_size_t memsize = 0;
int busno;
/*
* Fill in the space tag for the i80321's own devices,
* and hand-craft the space handle for it (the device
* was mapped during early bootstrap).
*/
i80321_bs_init(&i80321_bs_tag, sc);
sc->sc_st = &i80321_bs_tag;
sc->sc_sh = IQ80321_80321_VBASE;
sc->dev = dev;
sc->sc_is_host = 1;
/*
* Slice off a subregion for the Memory Controller -- we need it
* here in order read the memory size.
*/
if (bus_space_subregion(sc->sc_st, sc->sc_sh, VERDE_MCU_BASE,
VERDE_MCU_SIZE, &sc->sc_mcu_sh))
panic("%s: unable to subregion MCU registers",
device_get_name(dev));
if (bus_space_subregion(sc->sc_st, sc->sc_sh, VERDE_ATU_BASE,
VERDE_ATU_SIZE, &sc->sc_atu_sh))
panic("%s: unable to subregion ATU registers",
device_get_name(dev));
/*
* We have mapped the PCI I/O windows in the early
* bootstrap phase.
*/
sc->sc_iow_vaddr = IQ80321_IOW_VBASE;
/*
* Check the configuration of the ATU to see if another BIOS
* has configured us. If a PC BIOS didn't configure us, then:
* IQ80321: BAR0 00000000.0000000c BAR1 is 00000000.8000000c.
* IQ31244: BAR0 00000000.00000004 BAR1 is 00000000.0000000c.
* If a BIOS has configured us, at least one of those should be
* different. This is pretty fragile, but it's not clear what
* would work better.
*/
b0l = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCIR_BARS+0x0);
b0u = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCIR_BARS+0x4);
b1l = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCIR_BARS+0x8);
b1u = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCIR_BARS+0xc);
#ifdef VERBOSE_INIT_ARM
printf("i80321: BAR0 = %08x.%08x BAR1 = %08x.%08x\n",
b0l,b0u, b1l, b1u );
#endif
#define PCI_MAPREG_MEM_ADDR_MASK 0xfffffff0
b0l &= PCI_MAPREG_MEM_ADDR_MASK;
b0u &= PCI_MAPREG_MEM_ADDR_MASK;
b1l &= PCI_MAPREG_MEM_ADDR_MASK;
b1u &= PCI_MAPREG_MEM_ADDR_MASK;
#ifdef VERBOSE_INIT_ARM
printf("i80219: BAR0 = %08x.%08x BAR1 = %08x.%08x\n",
b0l,b0u, b1l, b1u );
#endif
if ((b0u != b1u) || (b0l != 0) || ((b1l & ~0x80000000U) != 0))
sc->sc_is_host = 0;
else
sc->sc_is_host = 1;
/* FIXME: i force it's */
#ifdef CPU_XSCALE_80219
sc->sc_is_host = 1;
#endif
i80321_sdram_bounds(sc->sc_st, sc->sc_mcu_sh, &memstart, &memsize);
/*
* We set up the Inbound Windows as follows:
*
* 0 Access to i80321 PMMRs
*
* 1 Reserve space for private devices
*
* 2 RAM access
*
* 3 Unused.
*
* This chunk needs to be customized for each IOP321 application.
*/
#if 0
sc->sc_iwin[0].iwin_base_lo = VERDE_PMMR_BASE;
sc->sc_iwin[0].iwin_base_hi = 0;
sc->sc_iwin[0].iwin_xlate = VERDE_PMMR_BASE;
sc->sc_iwin[0].iwin_size = VERDE_PMMR_SIZE;
#endif
if (sc->sc_is_host) {
/* Map PCI:Local 1:1. */
sc->sc_iwin[1].iwin_base_lo = VERDE_OUT_XLATE_MEM_WIN0_BASE |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[1].iwin_base_hi = 0;
} else {
sc->sc_iwin[1].iwin_base_lo = 0;
sc->sc_iwin[1].iwin_base_hi = 0;
}
sc->sc_iwin[1].iwin_xlate = VERDE_OUT_XLATE_MEM_WIN0_BASE;
sc->sc_iwin[1].iwin_size = VERDE_OUT_XLATE_MEM_WIN_SIZE;
if (sc->sc_is_host) {
sc->sc_iwin[2].iwin_base_lo = memstart |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[2].iwin_base_hi = 0;
} else {
sc->sc_iwin[2].iwin_base_lo = 0;
sc->sc_iwin[2].iwin_base_hi = 0;
}
sc->sc_iwin[2].iwin_xlate = memstart;
sc->sc_iwin[2].iwin_size = memsize;
if (sc->sc_is_host) {
sc->sc_iwin[3].iwin_base_lo = 0 |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
} else {
sc->sc_iwin[3].iwin_base_lo = 0;
}
sc->sc_iwin[3].iwin_base_hi = 0;
sc->sc_iwin[3].iwin_xlate = 0;
sc->sc_iwin[3].iwin_size = 0;
#ifdef VERBOSE_INIT_ARM
printf("i80321: Reserve space for private devices (Inbound Window 1) \n hi:0x%08x lo:0x%08x xlate:0x%08x size:0x%08x\n",
sc->sc_iwin[1].iwin_base_hi,
sc->sc_iwin[1].iwin_base_lo,
sc->sc_iwin[1].iwin_xlate,
sc->sc_iwin[1].iwin_size
);
printf("i80321: RAM access (Inbound Window 2) \n hi:0x%08x lo:0x%08x xlate:0x%08x size:0x%08x\n",
sc->sc_iwin[2].iwin_base_hi,
sc->sc_iwin[2].iwin_base_lo,
sc->sc_iwin[2].iwin_xlate,
sc->sc_iwin[2].iwin_size
);
#endif
/*
* We set up the Outbound Windows as follows:
*
* 0 Access to private PCI space.
*
* 1 Unused.
*/
#define PCI_MAPREG_MEM_ADDR(x) ((x) & 0xfffffff0)
sc->sc_owin[0].owin_xlate_lo =
PCI_MAPREG_MEM_ADDR(sc->sc_iwin[1].iwin_base_lo);
sc->sc_owin[0].owin_xlate_hi = sc->sc_iwin[1].iwin_base_hi;
/*
* Set the Secondary Outbound I/O window to map
* to PCI address 0 for all 64K of the I/O space.
*/
sc->sc_ioout_xlate = 0;
i80321_attach(sc);
i80321_dr.dr_sysbase = sc->sc_iwin[2].iwin_xlate;
i80321_dr.dr_busbase = PCI_MAPREG_MEM_ADDR(sc->sc_iwin[2].iwin_base_lo);
i80321_dr.dr_len = sc->sc_iwin[2].iwin_size;
dma_range_init = 1;
busno = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, ATU_PCIXSR);
busno = PCIXSR_BUSNO(busno);
if (busno == 0xff)
busno = 0;
sc->sc_irq_rman.rm_type = RMAN_ARRAY;
sc->sc_irq_rman.rm_descr = "i80321 IRQs";
if (rman_init(&sc->sc_irq_rman) != 0 ||
rman_manage_region(&sc->sc_irq_rman, 0, 25) != 0)
panic("i80321_attach: failed to set up IRQ rman");
device_add_child(dev, "obio", 0);
device_add_child(dev, "itimer", 0);
device_add_child(dev, "iopwdog", 0);
#ifndef CPU_XSCALE_80219
device_add_child(dev, "iqseg", 0);
#endif
device_add_child(dev, "pcib", busno);
device_add_child(dev, "i80321_dma", 0);
device_add_child(dev, "i80321_dma", 1);
#ifndef CPU_XSCALE_80219
device_add_child(dev, "i80321_aau", 0);
#endif
bus_generic_probe(dev);
bus_generic_attach(dev);
return (0);
}
void
hdlg_mainbus_attach(struct device *parent, struct device *self, void *aux)
{
struct i80321_softc *sc = (void *) self;
pcireg_t b0u, b0l, b1u, b1l;
paddr_t memstart;
psize_t memsize;
hdlg_mainbus_found = 1;
/*
* Fill in the space tag for the i80321's own devices,
* and hand-craft the space handle for it (the device
* was mapped during early bootstrap).
*/
i80321_bs_init(&i80321_bs_tag, sc);
sc->sc_st = &i80321_bs_tag;
sc->sc_sh = HDLG_80321_VBASE;
/*
* Slice off a subregion for the Memory Controller -- we need it
* here in order read the memory size.
*/
if (bus_space_subregion(sc->sc_st, sc->sc_sh, VERDE_MCU_BASE,
VERDE_MCU_SIZE, &sc->sc_mcu_sh))
panic("%s: unable to subregion MCU registers",
device_xname(&sc->sc_dev));
if (bus_space_subregion(sc->sc_st, sc->sc_sh, VERDE_ATU_BASE,
VERDE_ATU_SIZE, &sc->sc_atu_sh))
panic("%s: unable to subregion ATU registers",
device_xname(&sc->sc_dev));
/*
* We have mapped the PCI I/O windows in the early bootstrap phase.
*/
sc->sc_iow_vaddr = HDLG_IOW_VBASE;
/*
* Check the configuration of the ATU to see if another BIOS
* has configured us. If a PC BIOS didn't configure us, then:
* IQ80321: BAR0 00000000.0000000c BAR1 is 00000000.8000000c.
* IQ31244: BAR0 00000000.00000004 BAR1 is 00000000.0000000c.
* If a BIOS has configured us, at least one of those should be
* different. This is pretty fragile, but it's not clear what
* would work better.
*/
b0l = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x0);
b0u = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x4);
b1l = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x8);
b1u = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0xc);
b0l &= PCI_MAPREG_MEM_ADDR_MASK;
b0u &= PCI_MAPREG_MEM_ADDR_MASK;
b1l &= PCI_MAPREG_MEM_ADDR_MASK;
b1u &= PCI_MAPREG_MEM_ADDR_MASK;
if ((b0u != b1u) || (b0l != 0) || ((b1l & ~0x80000000U) != 0))
sc->sc_is_host = 0;
else
sc->sc_is_host = 1;
aprint_naive(": i80219 I/O Processor\n");
aprint_normal(": i80219 I/O Processor, acting as PCI %s\n",
sc->sc_is_host ? "host" : "slave");
i80321_sdram_bounds(sc->sc_st, sc->sc_mcu_sh, &memstart, &memsize);
/*
* We set up the Inbound Windows as follows:
*
* 0 Access to i80219 PMMRs
*
* 1 Reserve space for private devices
*
* 2 RAM access
*
* 3 Unused.
*
* This chunk needs to be customized for each IOP321 application.
*/
#if 0
sc->sc_iwin[0].iwin_base_lo = VERDE_PMMR_BASE;
sc->sc_iwin[0].iwin_base_hi = 0;
sc->sc_iwin[0].iwin_xlate = VERDE_PMMR_BASE;
sc->sc_iwin[0].iwin_size = VERDE_PMMR_SIZE;
#endif
if (sc->sc_is_host) {
/* Map PCI:Local 1:1. */
sc->sc_iwin[1].iwin_base_lo = VERDE_OUT_XLATE_MEM_WIN0_BASE |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[1].iwin_base_hi = 0;
} else {
sc->sc_iwin[1].iwin_base_lo = 0;
sc->sc_iwin[1].iwin_base_hi = 0;
}
sc->sc_iwin[1].iwin_xlate = VERDE_OUT_XLATE_MEM_WIN0_BASE;
sc->sc_iwin[1].iwin_size = VERDE_OUT_XLATE_MEM_WIN_SIZE;
if (sc->sc_is_host) {
sc->sc_iwin[2].iwin_base_lo = memstart |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[2].iwin_base_hi = 0;
} else {
sc->sc_iwin[2].iwin_base_lo = 0;
sc->sc_iwin[2].iwin_base_hi = 0;
}
sc->sc_iwin[2].iwin_xlate = memstart;
sc->sc_iwin[2].iwin_size = memsize;
if (sc->sc_is_host) {
sc->sc_iwin[3].iwin_base_lo = 0 |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
} else {
sc->sc_iwin[3].iwin_base_lo = 0;
}
sc->sc_iwin[3].iwin_base_hi = 0;
sc->sc_iwin[3].iwin_xlate = 0;
sc->sc_iwin[3].iwin_size = 0;
/*
* We set up the Outbound Windows as follows:
*
* 0 Access to private PCI space.
*
* 1 Unused.
*/
sc->sc_owin[0].owin_xlate_lo =
PCI_MAPREG_MEM_ADDR(sc->sc_iwin[1].iwin_base_lo);
sc->sc_owin[0].owin_xlate_hi = sc->sc_iwin[1].iwin_base_hi;
/*
* Set the Secondary Outbound I/O window to map
* to PCI address 0 for all 64K of the I/O space.
*/
sc->sc_ioout_xlate = 0;
sc->sc_ioout_xlate_offset = 0x1000;
/*
* Initialize the interrupt part of our PCI chipset tag.
*/
hdlg_pci_init(&sc->sc_pci_chipset, sc);
i80321_attach(sc);
}
