/*
* IEEE80211_M_MONITOR vap state machine handler.
*/
static int
monitor_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211com *ic = vap->iv_ic;
enum ieee80211_state ostate;
IEEE80211_LOCK_ASSERT(ic);
ostate = vap->iv_state;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
__func__, ieee80211_state_name[ostate],
ieee80211_state_name[nstate], arg);
vap->iv_state = nstate; /* state transition */
if (nstate == IEEE80211_S_RUN) {
switch (ostate) {
case IEEE80211_S_INIT:
ieee80211_create_ibss(vap, ic->ic_curchan);
break;
default:
break;
}
/*
* NB: this shouldn't be here but many people use
* monitor mode for raw packets; once we switch
* them over to adhoc demo mode remove this.
*/
ieee80211_node_authorize(vap->iv_bss);
}
return 0;
}
/*
* IEEE80211_M_IBSS+IEEE80211_M_AHDEMO vap state machine handler.
*/
static int
adhoc_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
enum ieee80211_state ostate;
IEEE80211_LOCK_ASSERT(vap->iv_ic);
ostate = vap->iv_state;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n",
__func__, ieee80211_state_name[ostate],
ieee80211_state_name[nstate], arg);
vap->iv_state = nstate; /* state transition */
if (ostate != IEEE80211_S_SCAN)
ieee80211_cancel_scan(vap); /* background scan */
ni = vap->iv_bss; /* NB: no reference held */
switch (nstate) {
case IEEE80211_S_INIT:
switch (ostate) {
case IEEE80211_S_SCAN:
ieee80211_cancel_scan(vap);
break;
default:
break;
}
if (ostate != IEEE80211_S_INIT) {
/* NB: optimize INIT -> INIT case */
ieee80211_reset_bss(vap);
}
break;
case IEEE80211_S_SCAN:
switch (ostate) {
case IEEE80211_S_RUN: /* beacon miss */
/* purge station table; entries are stale */
ieee80211_iterate_nodes(&ic->ic_sta, sta_leave, vap);
/* fall thru... */
case IEEE80211_S_INIT:
if (vap->iv_des_chan != IEEE80211_CHAN_ANYC &&
!IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) {
/*
* Already have a channel; bypass the
* scan and startup immediately.
*/
ieee80211_create_ibss(vap,
ieee80211_ht_adjust_channel(ic,
vap->iv_des_chan, vap->iv_flags_ht));
break;
}
/*
* Initiate a scan. We can come here as a result
* of an IEEE80211_IOC_SCAN_REQ too in which case
* the vap will be marked with IEEE80211_FEXT_SCANREQ
* and the scan request parameters will be present
* in iv_scanreq. Otherwise we do the default.
*/
if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) {
ieee80211_check_scan(vap,
vap->iv_scanreq_flags,
vap->iv_scanreq_duration,
vap->iv_scanreq_mindwell,
vap->iv_scanreq_maxdwell,
vap->iv_scanreq_nssid, vap->iv_scanreq_ssid);
vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ;
} else
ieee80211_check_scan_current(vap);
break;
case IEEE80211_S_SCAN:
/*
* This can happen because of a change in state
* that requires a reset. Trigger a new scan
* unless we're in manual roaming mode in which
* case an application must issue an explicit request.
*/
if (vap->iv_roaming == IEEE80211_ROAMING_AUTO)
ieee80211_check_scan_current(vap);
break;
default:
goto invalid;
}
break;
case IEEE80211_S_RUN:
if (vap->iv_flags & IEEE80211_F_WPA) {
/* XXX validate prerequisites */
}
switch (ostate) {
case IEEE80211_S_SCAN:
#ifdef IEEE80211_DEBUG
if (ieee80211_msg_debug(vap)) {
ieee80211_note(vap,
"synchronized with %s ssid ",
ether_sprintf(ni->ni_bssid));
ieee80211_print_essid(vap->iv_bss->ni_essid,
ni->ni_esslen);
/* XXX MCS/HT */
printf(" channel %d start %uMb\n",
ieee80211_chan2ieee(ic, ic->ic_curchan),
IEEE80211_RATE2MBS(ni->ni_txrate));
}
#endif
break;
case IEEE80211_S_RUN: /* IBSS merge */
break;
default:
goto invalid;
}
/*
* When 802.1x is not in use mark the port authorized
* at this point so traffic can flow.
*/
if (ni->ni_authmode != IEEE80211_AUTH_8021X)
ieee80211_node_authorize(ni);
/*
* Fake association when joining an existing bss.
*/
if (!IEEE80211_ADDR_EQ(ni->ni_macaddr, vap->iv_myaddr) &&
ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, ostate != IEEE80211_S_RUN);
break;
case IEEE80211_S_SLEEP:
vap->iv_sta_ps(vap, 0);
break;
default:
invalid:
IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE,
"%s: unexpected state transition %s -> %s\n", __func__,
ieee80211_state_name[ostate], ieee80211_state_name[nstate]);
break;
}
return 0;
}
/*
* Complete a scan of potential channels.
*/
void
ieee80211_end_scan(struct ifnet *ifp)
{
struct ieee80211com *ic = (void *)ifp;
struct ieee80211_node *ni, *nextbs, *selbs;
if (ifp->if_flags & IFF_DEBUG)
printf("%s: end %s scan\n", ifp->if_xname,
(ic->ic_flags & IEEE80211_F_ASCAN) ?
"active" : "passive");
if (ic->ic_scan_count)
ic->ic_flags &= ~IEEE80211_F_ASCAN;
ni = RB_MIN(ieee80211_tree, &ic->ic_tree);
#ifndef IEEE80211_STA_ONLY
if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
/* XXX off stack? */
u_char occupied[howmany(IEEE80211_CHAN_MAX, NBBY)];
int i, fail;
/*
* The passive scan to look for existing AP's completed,
* select a channel to camp on. Identify the channels
* that already have one or more AP's and try to locate
* an unnoccupied one. If that fails, pick a random
* channel from the active set.
*/
memset(occupied, 0, sizeof(occupied));
RB_FOREACH(ni, ieee80211_tree, &ic->ic_tree)
setbit(occupied, ieee80211_chan2ieee(ic, ni->ni_chan));
for (i = 0; i < IEEE80211_CHAN_MAX; i++)
if (isset(ic->ic_chan_active, i) && isclr(occupied, i))
break;
if (i == IEEE80211_CHAN_MAX) {
fail = arc4random() & 3; /* random 0-3 */
for (i = 0; i < IEEE80211_CHAN_MAX; i++)
if (isset(ic->ic_chan_active, i) && fail-- == 0)
break;
}
ieee80211_create_ibss(ic, &ic->ic_channels[i]);
goto wakeup;
}
#endif
if (ni == NULL) {
DPRINTF(("no scan candidate\n"));
notfound:
#ifndef IEEE80211_STA_ONLY
if (ic->ic_opmode == IEEE80211_M_IBSS &&
(ic->ic_flags & IEEE80211_F_IBSSON) &&
ic->ic_des_esslen != 0) {
ieee80211_create_ibss(ic, ic->ic_ibss_chan);
goto wakeup;
}
#endif
/*
* Scan the next mode if nothing has been found. This
* is necessary if the device supports different
* incompatible modes in the same channel range, like
* like 11b and "pure" 11G mode. This will loop
* forever except for user-initiated scans.
*/
if (ieee80211_next_mode(ifp) == IEEE80211_MODE_AUTO) {
if (ic->ic_scan_lock & IEEE80211_SCAN_REQUEST &&
ic->ic_scan_lock & IEEE80211_SCAN_RESUME) {
ic->ic_scan_lock = IEEE80211_SCAN_LOCKED;
/* Return from an user-initiated scan */
wakeup(&ic->ic_scan_lock);
} else if (ic->ic_scan_lock & IEEE80211_SCAN_REQUEST)
goto wakeup;
ic->ic_scan_count++;
}
/*
* Reset the list of channels to scan and start again.
*/
ieee80211_next_scan(ifp);
return;
}
selbs = NULL;
for (; ni != NULL; ni = nextbs) {
nextbs = RB_NEXT(ieee80211_tree, &ic->ic_tree, ni);
if (ni->ni_fails) {
/*
* The configuration of the access points may change
* during my scan. So delete the entry for the AP
* and retry to associate if there is another beacon.
*/
if (ni->ni_fails++ > 2)
ieee80211_free_node(ic, ni);
continue;
}
if (ieee80211_match_bss(ic, ni) == 0) {
if (selbs == NULL)
selbs = ni;
else if (ni->ni_rssi > selbs->ni_rssi)
selbs = ni;
}
}
if (selbs == NULL)
goto notfound;
(*ic->ic_node_copy)(ic, ic->ic_bss, selbs);
ni = ic->ic_bss;
/*
* Set the erp state (mostly the slot time) to deal with
* the auto-select case; this should be redundant if the
* mode is locked.
*/
ic->ic_curmode = ieee80211_chan2mode(ic, ni->ni_chan);
ieee80211_reset_erp(ic);
if (ic->ic_flags & IEEE80211_F_RSNON)
ieee80211_choose_rsnparams(ic);
else if (ic->ic_flags & IEEE80211_F_WEPON)
ni->ni_rsncipher = IEEE80211_CIPHER_USEGROUP;
ieee80211_node_newstate(selbs, IEEE80211_STA_BSS);
#ifndef IEEE80211_STA_ONLY
if (ic->ic_opmode == IEEE80211_M_IBSS) {
ieee80211_fix_rate(ic, ni, IEEE80211_F_DOFRATE |
IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
if (ni->ni_rates.rs_nrates == 0)
goto notfound;
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
} else
#endif
ieee80211_new_state(ic, IEEE80211_S_AUTH, -1);
wakeup:
if (ic->ic_scan_lock & IEEE80211_SCAN_REQUEST) {
/* Return from an user-initiated scan */
wakeup(&ic->ic_scan_lock);
}
ic->ic_scan_lock = IEEE80211_SCAN_UNLOCKED;
}
