int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct mesh_setup *setup,
const struct mesh_config *conf)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err;
BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
ASSERT_WDEV_LOCK(wdev);
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
setup->is_secure)
return -EOPNOTSUPP;
if (wdev->mesh_id_len)
return -EALREADY;
if (!setup->mesh_id_len)
return -EINVAL;
if (!rdev->ops->join_mesh)
return -EOPNOTSUPP;
if (!setup->chandef.chan) {
/* if no channel explicitly given, use preset channel */
setup->chandef = wdev->preset_chandef;
}
if (!setup->chandef.chan) {
/* if we don't have that either, use the first usable channel */
enum nl80211_band band;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
int i;
sband = rdev->wiphy.bands[band];
if (!sband)
continue;
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
if (chan->flags & (IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_DISABLED |
IEEE80211_CHAN_RADAR))
continue;
setup->chandef.chan = chan;
break;
}
if (setup->chandef.chan)
break;
}
/* no usable channel ... */
if (!setup->chandef.chan)
return -EINVAL;
setup->chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
setup->chandef.center_freq1 = setup->chandef.chan->center_freq;
}
/*
* check if basic rates are available otherwise use mandatory rates as
* basic rates
*/
if (!setup->basic_rates) {
enum nl80211_bss_scan_width scan_width;
struct ieee80211_supported_band *sband =
rdev->wiphy.bands[setup->chandef.chan->band];
if (setup->chandef.chan->band == NL80211_BAND_2GHZ) {
int i;
/*
* Older versions selected the mandatory rates for
* 2.4 GHz as well, but were broken in that only
* 1 Mbps was regarded as a mandatory rate. Keep
* using just 1 Mbps as the default basic rate for
* mesh to be interoperable with older versions.
*/
for (i = 0; i < sband->n_bitrates; i++) {
if (sband->bitrates[i].bitrate == 10) {
setup->basic_rates = BIT(i);
break;
}
}
} else {
scan_width = cfg80211_chandef_to_scan_width(&setup->chandef);
setup->basic_rates = ieee80211_mandatory_rates(sband,
scan_width);
}
}
err = cfg80211_chandef_dfs_required(&rdev->wiphy,
&setup->chandef,
NL80211_IFTYPE_MESH_POINT);
if (err < 0)
return err;
if (err > 0 && !setup->userspace_handles_dfs)
return -EINVAL;
if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef,
NL80211_IFTYPE_MESH_POINT))
return -EINVAL;
err = rdev_join_mesh(rdev, dev, conf, setup);
if (!err) {
memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
wdev->mesh_id_len = setup->mesh_id_len;
wdev->chandef = setup->chandef;
wdev->beacon_interval = setup->beacon_interval;
}
return err;
}
int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct mesh_setup *setup,
const struct mesh_config *conf)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err;
BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
ASSERT_WDEV_LOCK(wdev);
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
return -EOPNOTSUPP;
if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
setup->is_secure)
return -EOPNOTSUPP;
if (wdev->mesh_id_len)
return -EALREADY;
if (!setup->mesh_id_len)
return -EINVAL;
if (!rdev->ops->join_mesh)
return -EOPNOTSUPP;
if (!setup->chandef.chan) {
/* if no channel explicitly given, use preset channel */
setup->chandef = wdev->preset_chandef;
}
if (!setup->chandef.chan) {
/* if we don't have that either, use the first usable channel */
enum nl80211_band band;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
int i;
sband = rdev->wiphy.bands[band];
if (!sband)
continue;
for (i = 0; i < sband->n_channels; i++) {
chan = &sband->channels[i];
if (chan->flags & (IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_DISABLED |
IEEE80211_CHAN_RADAR))
continue;
setup->chandef.chan = chan;
break;
}
if (setup->chandef.chan)
break;
}
/* no usable channel ... */
if (!setup->chandef.chan)
return -EINVAL;
setup->chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
setup->chandef.center_freq1 = setup->chandef.chan->center_freq;
}
/*
* check if basic rates are available otherwise use mandatory rates as
* basic rates
*/
if (!setup->basic_rates) {
enum nl80211_bss_scan_width scan_width;
struct ieee80211_supported_band *sband =
rdev->wiphy.bands[setup->chandef.chan->band];
scan_width = cfg80211_chandef_to_scan_width(&setup->chandef);
setup->basic_rates = ieee80211_mandatory_rates(sband,
scan_width);
}
if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef,
NL80211_IFTYPE_MESH_POINT))
return -EINVAL;
err = rdev_join_mesh(rdev, dev, conf, setup);
if (!err) {
memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
wdev->mesh_id_len = setup->mesh_id_len;
wdev->chandef = setup->chandef;
}
return err;
}
static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee80211_rx_status *rx_status,
struct ieee802_11_elems *elems,
bool beacon)
{
struct ieee80211_local *local = sdata->local;
int freq;
struct cfg80211_bss *cbss;
struct ieee80211_bss *bss;
struct sta_info *sta;
struct ieee80211_channel *channel;
u64 beacon_timestamp, rx_timestamp;
u32 supp_rates = 0;
enum ieee80211_band band = rx_status->band;
struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
bool rates_updated = false;
if (elems->ds_params && elems->ds_params_len == 1)
freq = ieee80211_channel_to_frequency(elems->ds_params[0],
band);
else
freq = rx_status->freq;
channel = ieee80211_get_channel(local->hw.wiphy, freq);
if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
return;
if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
memcmp(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN) == 0) {
rcu_read_lock();
sta = sta_info_get(sdata, mgmt->sa);
if (elems->supp_rates) {
supp_rates = ieee80211_sta_get_rates(local, elems,
band);
if (sta) {
u32 prev_rates;
prev_rates = sta->sta.supp_rates[band];
/* make sure mandatory rates are always added */
sta->sta.supp_rates[band] = supp_rates |
ieee80211_mandatory_rates(local, band);
if (sta->sta.supp_rates[band] != prev_rates) {
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG
"%s: updated supp_rates set "
"for %pM based on beacon"
"/probe_resp (0x%x -> 0x%x)\n",
sdata->name, sta->sta.addr,
prev_rates,
sta->sta.supp_rates[band]);
#endif
rates_updated = true;
}
} else {
rcu_read_unlock();
sta = ieee80211_ibss_add_sta(sdata, mgmt->bssid,
mgmt->sa, supp_rates);
}
}
if (sta && elems->wmm_info)
set_sta_flag(sta, WLAN_STA_WME);
if (sta && elems->ht_info_elem && elems->ht_cap_elem &&
sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) {
/* we both use HT */
struct ieee80211_sta_ht_cap sta_ht_cap_new;
enum nl80211_channel_type channel_type =
ieee80211_ht_info_to_channel_type(
elems->ht_info_elem);
ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
elems->ht_cap_elem,
&sta_ht_cap_new);
/*
* fall back to HT20 if we don't use or use
* the other extension channel
*/
if ((channel_type == NL80211_CHAN_HT40MINUS ||
channel_type == NL80211_CHAN_HT40PLUS) &&
channel_type != sdata->u.ibss.channel_type)
sta_ht_cap_new.cap &=
~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new,
sizeof(sta_ht_cap_new))) {
memcpy(&sta->sta.ht_cap, &sta_ht_cap_new,
sizeof(sta_ht_cap_new));
rates_updated = true;
}
}
if (sta && rates_updated)
rate_control_rate_init(sta);
rcu_read_unlock();
}
bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
channel, beacon);
if (!bss)
return;
cbss = container_of((void *)bss, struct cfg80211_bss, priv);
/* was just updated in ieee80211_bss_info_update */
beacon_timestamp = cbss->tsf;
/* check if we need to merge IBSS */
/* we use a fixed BSSID */
if (sdata->u.ibss.fixed_bssid)
goto put_bss;
/* not an IBSS */
if (!(cbss->capability & WLAN_CAPABILITY_IBSS))
goto put_bss;
/* different channel */
if (cbss->channel != local->oper_channel)
goto put_bss;
/* different SSID */
if (elems->ssid_len != sdata->u.ibss.ssid_len ||
memcmp(elems->ssid, sdata->u.ibss.ssid,
sdata->u.ibss.ssid_len))
goto put_bss;
/* same BSSID */
if (memcmp(cbss->bssid, sdata->u.ibss.bssid, ETH_ALEN) == 0)
goto put_bss;
if (rx_status->flag & RX_FLAG_MACTIME_MPDU) {
/*
* For correct IBSS merging we need mactime; since mactime is
* defined as the time the first data symbol of the frame hits
* the PHY, and the timestamp of the beacon is defined as "the
* time that the data symbol containing the first bit of the
* timestamp is transmitted to the PHY plus the transmitting
* STA's delays through its local PHY from the MAC-PHY
* interface to its interface with the WM" (802.11 11.1.2)
* - equals the time this bit arrives at the receiver - we have
* to take into account the offset between the two.
*
* E.g. at 1 MBit that means mactime is 192 usec earlier
* (=24 bytes * 8 usecs/byte) than the beacon timestamp.
*/
int rate;
if (rx_status->flag & RX_FLAG_HT)
rate = 65; /* TODO: HT rates */
else
rate = local->hw.wiphy->bands[band]->
bitrates[rx_status->rate_idx].bitrate;
rx_timestamp = rx_status->mactime + (24 * 8 * 10 / rate);
} else {
/*
* second best option: get current TSF
* (will return -1 if not supported)
*/
rx_timestamp = drv_get_tsf(local, sdata);
}
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "RX beacon SA=%pM BSSID="
"%pM TSF=0x%llx BCN=0x%llx diff=%lld @%lu\n",
mgmt->sa, mgmt->bssid,
(unsigned long long)rx_timestamp,
(unsigned long long)beacon_timestamp,
(unsigned long long)(rx_timestamp - beacon_timestamp),
jiffies);
#endif
if (beacon_timestamp > rx_timestamp) {
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG "%s: beacon TSF higher than "
"local TSF - IBSS merge with BSSID %pM\n",
sdata->name, mgmt->bssid);
#endif
ieee80211_sta_join_ibss(sdata, bss);
supp_rates = ieee80211_sta_get_rates(local, elems, band);
ieee80211_ibss_add_sta(sdata, mgmt->bssid, mgmt->sa,
supp_rates);
rcu_read_unlock();
}
put_bss:
ieee80211_rx_bss_put(local, bss);
}
