/*
* Start transfer
*/
static void
lgue_start(struct ifnet *ifp, struct ifaltq_subque *ifsq)
{
struct lgue_softc *sc;
struct mbuf *m_head;
ASSERT_ALTQ_SQ_DEFAULT(ifp, ifsq);
sc = ifp->if_softc;
if (sc->lgue_dying)
return;
if (ifq_is_oactive(&ifp->if_snd)) {
return;
}
/* To internal queue */
while ((m_head = ifq_dequeue(&ifp->if_snd, NULL)) != NULL) {
if (lgue_encap(sc, m_head)) {
m_freem(m_head);
break;
}
/* Filter */
BPF_MTAP(ifp, m_head);
}
lgue_start_transfer(sc);
}
static void
start_xmit_frames(struct sbsh_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m;
/*
* Check if we have any free descriptor(s) and free space in
* our transmit queue.
*/
while (sc->tail_xq != ((sc->head_xq - 1) & (XQLEN - 1))
&& sc->regs->LTDR != ((sc->head_tdesc - 1) & 0x7f)) {
m = ifq_dequeue(&ifp->if_snd);
if (m == NULL)
break;
if (m->m_pkthdr.len) {
BPF_MTAP(ifp, m);
encap_frame(sc, m);
} else
m_freem(m);
}
if (sc->regs->CTDR != sc->regs->LTDR)
ifq_set_oactive(&ifp->if_snd);
else
ifq_clr_oactive(&ifp->if_snd);
}
/*
* Start transfer
*/
static void
lgue_start(struct ifnet *ifp)
{
struct lgue_softc *sc;
struct mbuf *m_head;
sc = ifp->if_softc;
if (sc->lgue_dying)
return;
if (ifp->if_flags & IFF_OACTIVE) {
return;
}
/* To internal queue */
while ((m_head = ifq_dequeue(&ifp->if_snd, NULL)) != NULL) {
if (lgue_encap(sc, m_head)) {
m_freem(m_head);
break;
}
/* Filter */
BPF_MTAP(ifp, m_head);
}
lgue_start_transfer(sc);
}
/*
* Get a packet to send. This procedure is intended to be called at
* splsoftnet, since it may involve time-consuming operations such as
* applying VJ compression, packet compression, address/control and/or
* protocol field compression to the packet.
*/
struct mbuf *
ppp_dequeue(struct ppp_softc *sc)
{
struct mbuf *m, *mp;
u_char *cp;
int address, control, protocol;
/*
* Grab a packet to send: first try the fast queue, then the
* normal queue.
*/
IF_DEQUEUE(&sc->sc_fastq, m);
if (m == NULL)
m = ifq_dequeue(&sc->sc_if.if_snd, NULL);
if (m == NULL)
return NULL;
++sc->sc_stats.ppp_opackets;
/*
* Extract the ppp header of the new packet.
* The ppp header will be in one mbuf.
*/
cp = mtod(m, u_char *);
address = PPP_ADDRESS(cp);
control = PPP_CONTROL(cp);
protocol = PPP_PROTOCOL(cp);
switch (protocol) {
case PPP_IP:
#ifdef VJC
/*
* If the packet is a TCP/IP packet, see if we can compress it.
*/
if ((sc->sc_flags & SC_COMP_TCP) && sc->sc_comp != NULL) {
struct ip *ip;
int type;
mp = m;
ip = (struct ip *) (cp + PPP_HDRLEN);
if (mp->m_len <= PPP_HDRLEN) {
mp = mp->m_next;
if (mp == NULL)
break;
ip = mtod(mp, struct ip *);
}
/* this code assumes the IP/TCP header is in one non-shared mbuf */
if (ip->ip_p == IPPROTO_TCP) {
type = sl_compress_tcp(mp, ip, sc->sc_comp,
!(sc->sc_flags & SC_NO_TCP_CCID));
switch (type) {
case TYPE_UNCOMPRESSED_TCP:
protocol = PPP_VJC_UNCOMP;
break;
case TYPE_COMPRESSED_TCP:
protocol = PPP_VJC_COMP;
cp = mtod(m, u_char *);
cp[0] = address; /* header has moved */
cp[1] = control;
cp[2] = 0;
break;
}
cp[3] = protocol; /* update protocol in PPP header */
}
}
/* Resume a packet transmit operation after a memory allocation
* has completed.
*
* This is basically a hacked up copy of snstart() which handles
* a completed memory allocation the same way snstart() does.
* It then passes control to snstart to handle any other queued
* packets.
*/
static void
snresume(struct ifnet *ifp)
{
struct sn_softc *sc = ifp->if_softc;
u_int len;
struct mbuf *m;
struct mbuf *top;
int pad;
int mask;
u_short length;
u_short numPages;
u_short pages_wanted;
u_char packet_no;
if (sc->pages_wanted < 0)
return;
pages_wanted = sc->pages_wanted;
sc->pages_wanted = -1;
/*
* Sneak a peek at the next packet
*/
m = ifq_dequeue(&ifp->if_snd);
if (m == NULL) {
kprintf("%s: snresume() with nothing to send\n",
ifp->if_xname);
return;
}
/*
* Compute the frame length and set pad to give an overall even
* number of bytes. Below we assume that the packet length is even.
*/
for (len = 0, top = m; m; m = m->m_next)
len += m->m_len;
pad = (len & 1);
/*
* We drop packets that are too large. Perhaps we should truncate
* them instead?
*/
if (len + pad > ETHER_MAX_LEN - ETHER_CRC_LEN) {
kprintf("%s: large packet discarded (B)\n", ifp->if_xname);
IFNET_STAT_INC(ifp, oerrors, 1);
m_freem(top);
return;
}
#ifdef SW_PAD
/*
* If HW padding is not turned on, then pad to ETHER_MIN_LEN.
*/
if (len < ETHER_MIN_LEN - ETHER_CRC_LEN)
pad = ETHER_MIN_LEN - ETHER_CRC_LEN - len;
#endif /* SW_PAD */
length = pad + len;
/*
* The MMU wants the number of pages to be the number of 256 byte
* 'pages', minus 1 (A packet can't ever have 0 pages. We also
* include space for the status word, byte count and control bytes in
* the allocation request.
*/
numPages = (length + 6) >> 8;
SMC_SELECT_BANK(2);
/*
* The memory allocation completed. Check the results. If it failed,
* we simply set a watchdog timer and hope for the best.
*/
packet_no = inb(BASE + ALLOC_RESULT_REG_B);
if (packet_no & ARR_FAILED) {
kprintf("%s: Memory allocation failed. Weird.\n", ifp->if_xname);
ifp->if_timer = 1;
ifq_prepend(&ifp->if_snd, top);
goto try_start;
}
/*
* We have a packet number, so tell the card to use it.
*/
outb(BASE + PACKET_NUM_REG_B, packet_no);
/*
* Now, numPages should match the pages_wanted recorded when the
* memory allocation was initiated.
*/
if (pages_wanted != numPages) {
kprintf("%s: memory allocation wrong size. Weird.\n", ifp->if_xname);
/*
* If the allocation was the wrong size we simply release the
* memory once it is granted. Wait for the MMU to be un-busy.
*/
while (inw(BASE + MMU_CMD_REG_W) & MMUCR_BUSY) /* NOTHING */
;
outw(BASE + MMU_CMD_REG_W, MMUCR_FREEPKT);
ifq_prepend(&ifp->if_snd, top);
return;
}
/*
* Point to the beginning of the packet
*/
outw(BASE + POINTER_REG_W, PTR_AUTOINC | 0x0000);
/*
* Send the packet length (+6 for status, length and control byte)
* and the status word (set to zeros)
*/
outw(BASE + DATA_REG_W, 0);
outb(BASE + DATA_REG_B, (length + 6) & 0xFF);
outb(BASE + DATA_REG_B, (length + 6) >> 8);
/*
* Push out the data to the card.
*/
for (m = top; m != NULL; m = m->m_next) {
/*
* Push out words.
*/
outsw(BASE + DATA_REG_W, mtod(m, caddr_t), m->m_len / 2);
/*
* Push out remaining byte.
*/
if (m->m_len & 1)
outb(BASE + DATA_REG_B, *(mtod(m, caddr_t) + m->m_len - 1));
}
/*
* Push out padding.
*/
while (pad > 1) {
outw(BASE + DATA_REG_W, 0);
pad -= 2;
}
if (pad)
outb(BASE + DATA_REG_B, 0);
/*
* Push out control byte and unused packet byte The control byte is 0
* meaning the packet is even lengthed and no special CRC handling is
* desired.
*/
outw(BASE + DATA_REG_W, 0);
/*
* Enable the interrupts and let the chipset deal with it Also set a
* watchdog in case we miss the interrupt.
*/
mask = inb(BASE + INTR_MASK_REG_B) | (IM_TX_INT | IM_TX_EMPTY_INT);
outb(BASE + INTR_MASK_REG_B, mask);
sc->intr_mask = mask;
outw(BASE + MMU_CMD_REG_W, MMUCR_ENQUEUE);
BPF_MTAP(ifp, top);
IFNET_STAT_INC(ifp, opackets, 1);
m_freem(top);
try_start:
/*
* Now pass control to snstart() to queue any additional packets
*/
ifq_clr_oactive(&ifp->if_snd);
if_devstart(ifp);
/*
* We've sent something, so we're active. Set a watchdog in case the
* TX_EMPTY interrupt is lost.
*/
ifq_set_oactive(&ifp->if_snd);
ifp->if_timer = 1;
}
void
snstart(struct ifnet *ifp, struct ifaltq_subque *ifsq)
{
struct sn_softc *sc = ifp->if_softc;
u_int len;
struct mbuf *m;
struct mbuf *top;
int pad;
int mask;
u_short length;
u_short numPages;
u_char packet_no;
int time_out;
ASSERT_ALTQ_SQ_DEFAULT(ifp, ifsq);
if ((ifp->if_flags & IFF_RUNNING) == 0 || ifq_is_oactive(&ifp->if_snd))
return;
if (sc->pages_wanted != -1) {
/* XXX should never happen */
kprintf("%s: snstart() while memory allocation pending\n",
ifp->if_xname);
ifq_set_oactive(&ifp->if_snd);
return;
}
startagain:
/*
* Sneak a peek at the next packet
*/
m = ifq_dequeue(&ifp->if_snd);
if (m == NULL)
return;
/*
* Compute the frame length and set pad to give an overall even
* number of bytes. Below we assume that the packet length is even.
*/
for (len = 0, top = m; m; m = m->m_next)
len += m->m_len;
pad = (len & 1);
/*
* We drop packets that are too large. Perhaps we should truncate
* them instead?
*/
if (len + pad > ETHER_MAX_LEN - ETHER_CRC_LEN) {
kprintf("%s: large packet discarded (A)\n", ifp->if_xname);
IFNET_STAT_INC(&sc->arpcom.ac_if, oerrors, 1);
m_freem(top);
goto readcheck;
}
#ifdef SW_PAD
/*
* If HW padding is not turned on, then pad to ETHER_MIN_LEN.
*/
if (len < ETHER_MIN_LEN - ETHER_CRC_LEN)
pad = ETHER_MIN_LEN - ETHER_CRC_LEN - len;
#endif /* SW_PAD */
length = pad + len;
/*
* The MMU wants the number of pages to be the number of 256 byte
* 'pages', minus 1 (A packet can't ever have 0 pages. We also
* include space for the status word, byte count and control bytes in
* the allocation request.
*/
numPages = (length + 6) >> 8;
/*
* Now, try to allocate the memory
*/
SMC_SELECT_BANK(2);
outw(BASE + MMU_CMD_REG_W, MMUCR_ALLOC | numPages);
/*
* Wait a short amount of time to see if the allocation request
* completes. Otherwise, I enable the interrupt and wait for
* completion asyncronously.
*/
time_out = MEMORY_WAIT_TIME;
do {
if (inb(BASE + INTR_STAT_REG_B) & IM_ALLOC_INT)
break;
} while (--time_out);
if (!time_out) {
/*
* No memory now. Oh well, wait until the chip finds memory
* later. Remember how many pages we were asking for and
* enable the allocation completion interrupt. Also set a
* watchdog in case we miss the interrupt. We mark the
* interface active since there is no point in attempting an
* snstart() until after the memory is available.
*/
mask = inb(BASE + INTR_MASK_REG_B) | IM_ALLOC_INT;
outb(BASE + INTR_MASK_REG_B, mask);
sc->intr_mask = mask;
ifp->if_timer = 1;
ifq_set_oactive(&ifp->if_snd);
sc->pages_wanted = numPages;
ifq_prepend(&ifp->if_snd, top);
return;
}
/*
* The memory allocation completed. Check the results.
*/
packet_no = inb(BASE + ALLOC_RESULT_REG_B);
if (packet_no & ARR_FAILED) {
kprintf("%s: Memory allocation failed\n", ifp->if_xname);
ifq_prepend(&ifp->if_snd, top);
goto startagain;
}
/*
* We have a packet number, so tell the card to use it.
*/
outb(BASE + PACKET_NUM_REG_B, packet_no);
/*
* Point to the beginning of the packet
*/
outw(BASE + POINTER_REG_W, PTR_AUTOINC | 0x0000);
/*
* Send the packet length (+6 for status, length and control byte)
* and the status word (set to zeros)
*/
outw(BASE + DATA_REG_W, 0);
outb(BASE + DATA_REG_B, (length + 6) & 0xFF);
outb(BASE + DATA_REG_B, (length + 6) >> 8);
/*
* Push out the data to the card.
*/
for (m = top; m != NULL; m = m->m_next) {
/*
* Push out words.
*/
outsw(BASE + DATA_REG_W, mtod(m, caddr_t), m->m_len / 2);
/*
* Push out remaining byte.
*/
if (m->m_len & 1)
outb(BASE + DATA_REG_B, *(mtod(m, caddr_t) + m->m_len - 1));
}
/*
* Push out padding.
*/
while (pad > 1) {
outw(BASE + DATA_REG_W, 0);
pad -= 2;
}
if (pad)
outb(BASE + DATA_REG_B, 0);
/*
* Push out control byte and unused packet byte The control byte is 0
* meaning the packet is even lengthed and no special CRC handling is
* desired.
*/
outw(BASE + DATA_REG_W, 0);
/*
* Enable the interrupts and let the chipset deal with it Also set a
* watchdog in case we miss the interrupt.
*/
mask = inb(BASE + INTR_MASK_REG_B) | (IM_TX_INT | IM_TX_EMPTY_INT);
outb(BASE + INTR_MASK_REG_B, mask);
sc->intr_mask = mask;
outw(BASE + MMU_CMD_REG_W, MMUCR_ENQUEUE);
ifq_set_oactive(&ifp->if_snd);
ifp->if_timer = 1;
BPF_MTAP(ifp, top);
IFNET_STAT_INC(ifp, opackets, 1);
m_freem(top);
readcheck:
/*
* Is another packet coming in? We don't want to overflow the tiny
* RX FIFO. If nothing has arrived then attempt to queue another
* transmit packet.
*/
if (inw(BASE + FIFO_PORTS_REG_W) & FIFO_REMPTY)
goto startagain;
}
static void
ep_if_start(struct ifnet *ifp, struct ifaltq_subque *ifsq)
{
struct ep_softc *sc = ifp->if_softc;
u_int len;
struct mbuf *m;
struct mbuf *top;
int pad;
ASSERT_ALTQ_SQ_DEFAULT(ifp, ifsq);
if (sc->gone) {
ifq_purge(&ifp->if_snd);
return;
}
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS);
if (ifq_is_oactive(&ifp->if_snd)) {
return;
}
crit_enter();
startagain:
/* Sneak a peek at the next packet */
m = ifq_dequeue(&ifp->if_snd, NULL);
if (m == NULL) {
crit_exit();
return;
}
for (len = 0, top = m; m; m = m->m_next)
len += m->m_len;
m = top;
pad = padmap[len & 3];
/*
* The 3c509 automatically pads short packets to minimum ethernet length,
* but we drop packets that are too large. Perhaps we should truncate
* them instead?
*/
if (len + pad > ETHER_MAX_LEN) {
/* packet is obviously too large: toss it */
IFNET_STAT_INC(ifp, oerrors, 1);
m_freem(m);
goto readcheck;
}
if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) {
/* no room in FIFO */
outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | (len + pad + 4));
/* make sure */
if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) {
ifq_set_oactive(&ifp->if_snd);
ifq_prepend(&ifp->if_snd, top);
crit_exit();
return;
}
} else {
outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | EP_THRESH_DISABLE);
}
outw(BASE + EP_W1_TX_PIO_WR_1, len);
outw(BASE + EP_W1_TX_PIO_WR_1, 0x0); /* Second dword meaningless */
if (EP_FTST(sc, F_ACCESS_32_BITS)) {
for (top = m; m != NULL; m = m->m_next) {
outsl(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t),
m->m_len / 4);
if (m->m_len & 3)
outsb(BASE + EP_W1_TX_PIO_WR_1,
mtod(m, caddr_t) + (m->m_len & (~3)),
m->m_len & 3);
}
} else {
for (top = m; m != NULL; m = m->m_next) {
outsw(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len / 2);
if (m->m_len & 1)
outb(BASE + EP_W1_TX_PIO_WR_1,
*(mtod(m, caddr_t) + m->m_len - 1));
}
}
while (pad--)
outb(BASE + EP_W1_TX_PIO_WR_1, 0); /* Padding */
BPF_MTAP(ifp, top);
ifp->if_timer = 2;
IFNET_STAT_INC(ifp, opackets, 1);
m_freem(top);
/*
* Is another packet coming in? We don't want to overflow the tiny RX
* fifo.
*/
readcheck:
if (inw(BASE + EP_W1_RX_STATUS) & RX_BYTES_MASK) {
/*
* we check if we have packets left, in that case we prepare to come
* back later
*/
if (!ifq_is_empty(&ifp->if_snd))
outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | 8);
crit_exit();
return;
}
goto startagain;
}
/* Start output on interface. Get datagrams from the queue and output
* them, giving the receiver a chance between datagrams. Call only
* from splimp or interrupt level!
*/
static void
el_start(struct ifnet *ifp)
{
struct el_softc *sc;
u_short base;
struct mbuf *m, *m0;
int i, len, retries, done;
/* Get things pointing in the right directions */
sc = ifp->if_softc;
base = sc->el_base;
dprintf(("el_start()...\n"));
/* Don't do anything if output is active */
if (ifp->if_flags & IFF_OACTIVE)
return;
ifp->if_flags |= IFF_OACTIVE;
/* The main loop. They warned me against endless loops, but
* would I listen? NOOO....
*/
while(1) {
/* Dequeue the next datagram */
m0 = ifq_dequeue(&ifp->if_snd, NULL);
/* If there's nothing to send, return. */
if(m0 == NULL) {
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
return;
}
/* Disable the receiver */
outb(base+EL_AC,EL_AC_HOST);
outb(base+EL_RBC,0);
/* Copy the datagram to the buffer. */
len = 0;
for(m = m0; m != NULL; m = m->m_next) {
if(m->m_len == 0)
continue;
bcopy(mtod(m,caddr_t),sc->el_pktbuf+len,m->m_len);
len += m->m_len;
}
m_freem(m0);
len = max(len,ETHER_MIN_LEN);
BPF_TAP(&sc->arpcom.ac_if, sc->el_pktbuf, len);
/* Transfer datagram to board */
dprintf(("el: xfr pkt length=%d...\n",len));
i = EL_BUFSIZ - len;
outb(base+EL_GPBL,(i & 0xff));
outb(base+EL_GPBH,((i>>8)&0xff));
outsb(base+EL_BUF,sc->el_pktbuf,len);
/* Now transmit the datagram */
retries=0;
done=0;
while(!done) {
if(el_xmit(sc,len)) { /* Something went wrong */
done = -1;
break;
}
/* Check out status */
i = inb(base+EL_TXS);
dprintf(("tx status=0x%x\n",i));
if(!(i & EL_TXS_READY)) {
dprintf(("el: err txs=%x\n",i));
sc->arpcom.ac_if.if_oerrors++;
if(i & (EL_TXS_COLL|EL_TXS_COLL16)) {
if((!(i & EL_TXC_DCOLL16)) && retries < 15) {
retries++;
outb(base+EL_AC,EL_AC_HOST);
}
}
else
done = 1;
}
else {
sc->arpcom.ac_if.if_opackets++;
done = 1;
}
}
if(done == -1) /* Packet not transmitted */
continue;
/* Now give the card a chance to receive.
* Gotta love 3c501s...
*/
inb(base+EL_AS);
outb(base+EL_AC,(EL_AC_IRQE|EL_AC_RX));
}
}
static void
ipheth_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct ipheth_softc *sc = usbd_xfer_softc(xfer);
struct ifnet *ifp = uether_getifp(&sc->sc_ue);
struct usb_page_cache *pc;
struct mbuf *m;
uint8_t x;
int actlen;
int aframes;
usbd_xfer_status(xfer, &actlen, NULL, &aframes, NULL);
DPRINTFN(1, "\n");
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTFN(11, "transfer complete: %u bytes in %u frames\n",
actlen, aframes);
IFNET_STAT_INC(ifp, opackets, 1);
/* free all previous TX buffers */
ipheth_free_queue(sc->sc_tx_buf, IPHETH_TX_FRAMES_MAX);
/* FALLTHROUGH */
case USB_ST_SETUP:
tr_setup:
for (x = 0; x != IPHETH_TX_FRAMES_MAX; x++) {
m = ifq_dequeue(&ifp->if_snd);
if (m == NULL)
break;
usbd_xfer_set_frame_offset(xfer,
x * IPHETH_BUF_SIZE, x);
pc = usbd_xfer_get_frame(xfer, x);
sc->sc_tx_buf[x] = m;
if (m->m_pkthdr.len > IPHETH_BUF_SIZE)
m->m_pkthdr.len = IPHETH_BUF_SIZE;
usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len);
usbd_xfer_set_frame_len(xfer, x, IPHETH_BUF_SIZE);
if (IPHETH_BUF_SIZE != m->m_pkthdr.len) {
usbd_frame_zero(pc, m->m_pkthdr.len,
IPHETH_BUF_SIZE - m->m_pkthdr.len);
}
/*
* If there's a BPF listener, bounce a copy of
* this frame to him:
*/
BPF_MTAP(ifp, m);
}
if (x != 0) {
usbd_xfer_set_frames(xfer, x);
usbd_transfer_submit(xfer);
}
break;
default: /* Error */
DPRINTFN(11, "transfer error, %s\n",
usbd_errstr(error));
/* free all previous TX buffers */
ipheth_free_queue(sc->sc_tx_buf, IPHETH_TX_FRAMES_MAX);
/* count output errors */
IFNET_STAT_INC(ifp, oerrors, 1);
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
break;
}
}
