static void __init mx27ads_board_init(void)
{
mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
"mx27ads");
imx27_add_imx_uart0(&uart_pdata);
imx27_add_imx_uart1(&uart_pdata);
imx27_add_imx_uart2(&uart_pdata);
imx27_add_imx_uart3(&uart_pdata);
imx27_add_imx_uart4(&uart_pdata);
imx27_add_imx_uart5(&uart_pdata);
imx27_add_mxc_nand(&mx27ads_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
imx27_add_i2c_imx1(&mx27ads_i2c1_data);
mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
static void __init mxt_td60_board_init(void)
{
mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
"MXT_TD60");
imx27_add_imx_uart0(&uart_pdata);
imx27_add_imx_uart1(&uart_pdata);
imx27_add_imx_uart2(&uart_pdata);
imx27_add_mxc_nand(&mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
ARRAY_SIZE(mxt_td60_i2c_devices));
i2c_register_board_info(1, mxt_td60_i2c2_devices,
ARRAY_SIZE(mxt_td60_i2c2_devices));
imx27_add_i2c_imx0(&mxt_td60_i2c0_data);
imx27_add_i2c_imx1(&mxt_td60_i2c1_data);
mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
static void __init pca100_init(void)
{
int ret;
/* SSI unit */
mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
MXC_AUDMUX_V1_PCR_TFCSEL(3) |
MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
MXC_AUDMUX_V1_PCR_RXDSEL(3));
mxc_audmux_v1_configure_port(3,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
MXC_AUDMUX_V1_PCR_TFCSEL(0) |
MXC_AUDMUX_V1_PCR_TFSDIR |
MXC_AUDMUX_V1_PCR_RXDSEL(0));
ret = mxc_gpio_setup_multiple_pins(pca100_pins,
ARRAY_SIZE(pca100_pins), "PCA100");
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
imx27_add_mxc_nand(&pca100_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pca100_i2c_devices,
ARRAY_SIZE(pca100_i2c_devices));
imx27_add_i2c_imx1(&pca100_i2c1_data);
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
spi_register_board_info(pca100_spi_board_info,
ARRAY_SIZE(pca100_spi_board_info));
imx27_add_spi_imx0(&pca100_spi0_data);
#endif
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
if (!otg_mode_host) {
gpio_set_value(OTG_PHY_CS_GPIO, 0);
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
}
mxc_register_device(&mxc_fb_device, &pca100_fb_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}