void initPIC() {
SYSTEMConfig(SYS_FREQ, SYS_CFG_ALL);
initLEDs();
initSerialNU32v2();
// Setup and turn off electromagnets
EMAG1 = 0;
EMAG2 = 0;
TRISEbits.TRISE7 = 0;
TRISCbits.TRISC1 = 0;
// Direction Output
DIR = 1;
TRISAbits.TRISA9 = 0;
setup_counters();
CloseADC10();
#define PARAM1 ADC_MODULE_ON | ADC_FORMAT_INTG | ADC_CLK_AUTO | ADC_AUTO_SAMPLING_ON
#define PARAM2 ADC_VREF_AVDD_AVSS | ADC_OFFSET_CAL_DISABLE | ADC_SCAN_ON | ADC_SAMPLES_PER_INT_16 | ADC_ALT_BUF_OFF | ADC_ALT_INPUT_OFF
#define PARAM3 ADC_CONV_CLK_INTERNAL_RC | ADC_SAMPLE_TIME_31
#define PARAM4 ENABLE_AN0_ANA | ENABLE_AN1_ANA | ENABLE_AN2_ANA | ENABLE_AN3_ANA | ENABLE_AN5_ANA | ENABLE_AN15_ANA
OpenADC10(PARAM1, PARAM2, PARAM3, PARAM4, 0);
EnableADC10();
// 20kHz PWM signal, duty from 0-1000, pin D3
OpenTimer2(T2_ON | T2_PS_1_4, MAX_DUTY);
OpenOC4(OC_ON | OC_TIMER2_SRC | OC_PWM_FAULT_PIN_DISABLE, 0, 0);
SetDCOC4PWM(0);
// 200 Hz ISR
OpenTimer3(T3_ON | T3_PS_1_256, (6250/4 - 1));
//OpenTimer3(T3_ON | T3_PS_1_256, (62500 - 1));
mT3SetIntPriority(1);
mT3ClearIntFlag();
mT3IntEnable(1);
INTConfigureSystem(INT_SYSTEM_CONFIG_MULT_VECTOR);
INTEnableSystemMultiVectoredInt();
}
int main(void) {
timesec=0;
// set PIC32 to max computing power
SYSTEMConfig(SYS_FREQ, SYS_CFG_ALL);
INTConfigureSystem(INT_SYSTEM_CONFIG_MULT_VECTOR);
INTEnableSystemMultiVectoredInt();
initLEDs();
LED0 = 1;
LED1 = 1;
initSerialNU32v2();
setup_counters();
CloseADC10();
#define PARAM1 ADC_MODULE_ON | ADC_FORMAT_INTG | ADC_CLK_AUTO | ADC_AUTO_SAMPLING_ON
#define PARAM2 ADC_VREF_AVDD_AVSS | ADC_OFFSET_CAL_DISABLE | ADC_SCAN_ON | ADC_SAMPLES_PER_INT_16 | ADC_ALT_BUF_OFF | ADC_ALT_INPUT_OFF
#define PARAM3 ADC_CONV_CLK_INTERNAL_RC | ADC_SAMPLE_TIME_31
#define PARAM4 ENABLE_AN0_ANA | ENABLE_AN1_ANA | ENABLE_AN2_ANA | ENABLE_AN3_ANA | ENABLE_AN5_ANA | ENABLE_AN15_ANA
OpenADC10( PARAM1, PARAM2, PARAM3, PARAM4,0);
EnableADC10();
// Setup and turn off electromagnets
EMAG1 = 0; EMAG2 = 0;
TRISEbits.TRISE7 = 0; TRISCbits.TRISC1 = 0;
//Direction Output
DIR = 1;
TRISAbits.TRISA9 = 0;
//g-select Outputs
GSEL1 = 0; GSEL2 = 0;
TRISEbits.TRISE2 = 0; TRISCbits.TRISC13= 0;
//0g Inputs
TRISAbits.TRISA0 = 1;
TRISAbits.TRISA4 = 1;
// 20kHz PWM signal, duty from 0-1000, pin D3
OpenTimer2(T2_ON | T2_PS_1_4, 1000);
OpenOC4(OC_ON | OC_TIMER2_SRC | OC_PWM_FAULT_PIN_DISABLE, 0, 0);
HBridgeDuty = 0;
SetDCOC4PWM(HBridgeDuty);
// 20Hz ISR
OpenTimer3(T3_ON | T3_PS_1_256, 15625);
mT3SetIntPriority(1);
mT3ClearIntFlag();
mT3IntEnable(1);
while(1) {
if(start){
EMAG2=0;
SetDCOC4PWM(100);
delaysec(delay1);
SetDCOC4PWM(1000);
delaysec(delay2);
SetDCOC4PWM(500);
delaysec(delay3);
EMAG2=1;
SetDCOC4PWM(0);
// EMAG1=0;
// SetDCOC4PWM(900);
// DIR = 0;
// delaysec(delay1);
// SetDCOC4PWM(0);
// delaysec(delay2);
// SetDCOC4PWM(700);
// delaysec(delay1);
// SetDCOC4PWM(1000);
// EMAG1=1;
start=0;
}
}
}
