int main() {
initSystem();
initSystemClock();
I2cMaster::start();
setGpioPinModeOutput(pPin13);
setGpioPinLow(pPin13);
lcd.init();
lcd.clear();
lcd.home();
lcd.autoscrollOff();
lcd.setBacklight(0);
delayMilliseconds(1000);
lcd.setBacklight(I2cLcd::kBacklight_Green);
lcd.displayTopRow("Hello, World!");
delayMilliseconds(1000);
lcd.setBacklight(I2cLcd::kBacklight_White);
long counter = 0;
for(;;) {
for(uint8_t color = 0; color < 8 ; color++) {
lcd.displayBottomRow(ltoa(counter, number, 10));
writeGpioPinDigital(pPin13, color % 2);
counter++;
}
}
}
bool PUParticleSystem3D::initWithFilePath( const std::string &filePath )
{
std::string fullPath = FileUtils::getInstance()->fullPathForFilename(filePath);
convertToUnixStylePath(fullPath);
std::string::size_type pos = fullPath.find_last_of("/");
std::string materialFolder = "materials";
if (pos != std::string::npos){
std::string temp = fullPath.substr(0, pos);
pos = temp.find_last_of("/");
if (pos != std::string::npos){
materialFolder = temp.substr(0, pos + 1) + materialFolder;
}
}
static std::vector<std::string> loadedFolder;
if (std::find(loadedFolder.begin(), loadedFolder.end(), materialFolder) == loadedFolder.end())
{
PUMaterialCache::Instance()->loadMaterialsFromSearchPaths(materialFolder);
loadedFolder.push_back(materialFolder);
}
if (!initSystem(fullPath)){
return false;
}
return true;
}
/******************************************************************************
* Function: void main(void)
* PreCondition: None
* Input: None
* Output: None
* Side Effects: None
* Overview: Main program entry point.
* Note: None
*****************************************************************************/
void main(void) {
//char numero[] = {'3','1','3','3','7','1','3','3','7',0};
char numero[] = {'1','3','3','7','0'};
//char numero[] = {'0','1','7','2','4'};
initSystem();
rs232_putString("OsomCom POCSAG 0.1\nRamiro Pareja ([email protected])\n");
//pocsagPhy_sendMsg(pocsag_createNumericMsg(1519073, numero));
////pocsagPhy_sendMsg(pocsag_createNumericMsg(RIC, numero));
//pocsagPhy_sendMsg(pocsag_createAlphaMsg(1111709, numero));
//pocsagPhy_sendMsg(pocsag_createIdleMsg());
//pocsagPhy_test();
// Process Loop
while (1) {
led_processLoop();
pocsagPhy_processLoop();
rs232_processLoop();
}
}
int main(void)
{
initSystem();
while (1)
{
HAL_GPIO_WritePin(GPIOD,GPIO_PIN_12, GPIO_PIN_SET);
HAL_Delay(100);
HAL_GPIO_WritePin(GPIOD,GPIO_PIN_12, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOD,GPIO_PIN_13, GPIO_PIN_SET);
HAL_Delay(100);
HAL_GPIO_WritePin(GPIOD,GPIO_PIN_13, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOD,GPIO_PIN_14, GPIO_PIN_SET);
HAL_Delay(100);
HAL_GPIO_WritePin(GPIOD,GPIO_PIN_14, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOD,GPIO_PIN_15, GPIO_PIN_SET);
HAL_Delay(100);
HAL_GPIO_WritePin(GPIOD,GPIO_PIN_15, GPIO_PIN_RESET);
}
}
bool init(HWND hWnd)
{
g_pD3D = Direct3DCreate9(D3D_SDK_VERSION);
if(!g_pD3D) {
return false;
}
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory(&d3dpp, sizeof(d3dpp));
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D24S8;
g_pD3D->CreateDevice(D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_HARDWARE_VERTEXPROCESSING, &d3dpp, &g_pd3dDevice);
if(!g_pd3dDevice) {
return false;
}
bool res = initFont();
initSystem();
return res;
}
void main()
{
initSystem();
initSC1602();
initPSW();
while(1)
{
if(10 =< SysTick - PrevSysTick)
{
PushedSW = diffsw(PORTB());
if(PORTBbits.RB5 == 1) IfSettingPSW = IfSettingPSW ^ 1;
PrevSysTick = SysTick;
}
if(IfSettingPSW == 1)
{
settingPSW(PushedSW);
}
else
{
PSW(PushedSW);
}
}
}
void* hi_wol_thread(void* arg)
{
int err, ret, sock;
int port = 9528;
char* machine = "hisilicon";
printf(">>>> %s ,%d \n",__FUNCTION__,__LINE__);
//pthread_t httper;
#ifdef H18E9732
initSystem("18E_OV9732", machine);
#else
initSystem("dv_board", machine);
#endif
initMsg();
(HI_VOID)prctl(PR_SET_NAME, (unsigned long)"hi_wol_thread", 0, 0, 0);
for (;;)
{
err = createSrv();
if (err == 0)
{ break; }
sleep(1);
}
sta_on_flag = 1;
pthread_attr_t attr;
memset(&attr, 0, sizeof(attr));
attr.schedparam.sched_priority = 9;
pthread_create(&ping_thread_pid, &attr, &pingThread, NULL);
//pthread_join(httper,NULL);
ret = createWolServer(NULL, port);
if (ret )
{
printf("create tcp 9528 fail ------------\n");
}
return NULL;
}
int main(void)
{
unsigned char c;
initSystem();
/*while(1)
testTimer();*/
DDRD |= 1 << 4;
DDRD |= 1 << 5;
DDRD |= 1 << 6;
DDRD |= 1 << 7;
DDRD |= (1 << 3);
DDRB &= ~(1 << 4);
DDRB |= 1 << 0;
DDRB |= 1 << 1;
DDRB |= 1 << 2;
DDRB |= 1 << 3;
_delay_milli(3000);
//testTimer();
/*testgsmSimul();*/
//testMotor();
bootTest();
//Serialflush();
while(1)
{
app();
//testReadSensors();
//testSesnors();
//testReadSensors();
//_delay_milli(100);
}
/*while (1)
{
testMotor();
}*/
/*DDRD |= 1 << 4;
DDRD |= 1 << 5;
DDRD |= 1 << 6;
DDRD |= 1 << 7;
while(1)
{
PORTD |= 1 << 4;
PORTD &= ~(1 << 5);
PORTD |= 1 << 6;
PORTD &= ~(1 << 7);
_delay_milli(500);
PORTD |= 1 << 5;
PORTD &= ~(1 << 4);
PORTD |= 1 << 7;
PORTD &= ~(1 << 6);
_delay_milli(500);
}*/
}
int Model::GreedyAlgo()
{
_start = clock();
initSystem();
for (t = 0; t < T; t++){
startAssignment();
bool assignComplete = false; //flag to indicate whether all requests are satisfied or pending for next time period
while(1)
{
reviewSystem();
//assignment: assign the highest arc delay/demand to a candidate vehicle
Arc* pArc;
Vehicle* pVeh;
bool isVehtoArcAssigned = assignVehtoArc(pArc, pVeh);
updateSystem(pArc, pVeh, isVehtoArcAssigned);
assignComplete = true;
k = 0;
for (vector<Arc>::iterator iArc = arc.begin(); iArc != arc.end(); iArc++, k++){
if(iArc->from == iArc->to) continue;
if(!arcIsAssigned[&(*iArc)]){
assignComplete = false; //assign is complete only if all arcs are assigned
break;
}
}
if(assignComplete)
break;
//if node load maximum is reached -- cancel vehicles toward this station and/or cancel previous route
} //done while loop
k = 0;
for (vector<Arc>::iterator iArc = arc.begin(); iArc != arc.end(); iArc++, k++){
if (iArc->from != iArc->to) continue;
v = 0;
for (vector<Vehicle>::iterator iVeh = sys.vehicle.begin(); iVeh != sys.vehicle.end(); ++iVeh, v++){
if (!(iVeh->assigned) && iVeh->to == iArc->to && iVeh->time == t){
sys.route[k][v][t] = 1; //stay in the station if the vehicle is not assigned toward any other stations
sys.NodeLoad[iArc->to][t]++; //update node load
iVeh->time = t + 1; //update time
iVeh->powLvl += maxC; //update battery level
}
}
}
}
// compute the total cost
computeTotalCost();
_end = clock();
cmp_time = (double)(_end - _start) / CLOCKS_PER_SEC;
sprintf(path, "%soutput/GreedyAlgo_%dV_%dN_%dArc_%dT.txt", directoryPath.c_str(), nVeh, N, nArc, T);
heuristicSol();
return 1;
}
bool PUParticleSystem3D::initWithFilePathAndMaterialPath( const std::string &filePath, const std::string &materialPath )
{
std::string matfullPath = FileUtils::getInstance()->fullPathForFilename(materialPath);
convertToUnixStylePath(matfullPath);
PUMaterialCache::Instance()->loadMaterials(matfullPath);
std::string fullPath = FileUtils::getInstance()->fullPathForFilename(filePath);
convertToUnixStylePath(fullPath);
if (!initSystem(fullPath)){
return false;
}
return true;
}
/*
* Main function. Parses command line arguments and launchs the simulator.
*/
int main (int argc, char **argv){
int opt;
// Default values
NodesFct f = BasicBroadcast;
int nb_nodes = 4;
int nb_rounds = 20;
// Parsing arguments
while(-1 != (opt = getopt(argc, argv, "N:R:hibtpLTX"))){
switch(opt){
case 'N':
nb_nodes = atoi(optarg);
break;
case 'R':
nb_rounds = atoi(optarg);
break;
case 'h':
display_help(stdout, argv[0]);
return 0;
case 'b':
f = BasicBroadcast;
break;
case 't':
f = TreeBroadcast;
break;
case 'p':
f = PipelineBroadcast;
break;
case 'L':
f = TOBLatencyBroadcast;
break;
case 'T':
f = TOBThroughputBroadcast;
break;
case 'X':
f = TOBThroughputRodBroadcast;
break;
default: /* WTF ? */
fprintf(stderr, "Argument error...\n");
display_help(stderr, argv[0]);
exit(EXIT_FAILURE);
}
}
// Do the simulation
initSystem(nb_nodes, nb_rounds, f);
LaunchSimulation();
deleteSystem();
return 0;
}
bool SceneDemo::init()
{
if(!initSystem("Scene Demo 4", 800, 600, false))
return false;
if(!map.load("graphics/map.map", "graphics/tiles.bmp"))
return false;
player = new MapNode(0, 10, 10, 50, 50, true, &map);
scene.addNode(player);
camera.set(0,0,800,600);
return true;
}
bool SceneDemo::init()
{
if(!initSystem("Maze", 32 * 29, 32 * 29, false))
return false;
if(!map.load("graphics/map.map", "graphics/tiles.bmp"))
return false;
player = new MapNode(0, 14 * SPRITE_DIM, 0 * SPRITE_DIM, SPRITE_DIM, SPRITE_DIM, true, &map);
scene.addNode(player);
camera.set(0,0,928,928);
return true;
}
int main (int argc, char *argv[])
{
char *configFile = NULL;
char *outputFile = NULL;
// Declare objects
struct system System;
struct tip Tip;
struct space Space;
struct graphene Graphene;
struct substrate Substrate;
initSystem(&System, &Tip, &Space, &Graphene, &Substrate);
parseOptions(argc, argv, &configFile, &outputFile, &System, &Tip);
parseFile(configFile, &System, &Tip, &Space, &Graphene, &Substrate);
createSystem(&System, &Tip);
createGraphene(&System, &Graphene);
// transformCylindric(&System);
// createSpace(&System, &Space);
createTip(&System, &Tip);
createSubstrate(&System, &Substrate);
// Spheroidal Tip
assignPointers(&System, &Tip, &Space, &Graphene, &Substrate);
assignPotential(&System, &Tip, &Space, &Graphene, &Substrate);
laplaceSpheroidal(&System, &Tip);
retransformSpheroidal(&Tip);
retransformCylindric(&System);
saveData(outputFile, &System);
// Visualize System if necessary
if (System.visual)
{
initVisual();
drawObjects(&System, &Tip, &Space, &Graphene, &Substrate);
}
free(System.points); // Free all points
return EXIT_SUCCESS;
}
//! Initialize JDFTx.
//! The lattice vectors, sample counts and the scalar fields in fluidminimize.
//! are in the same order as in Fortran, and specified in Angstroms.
//! This interface takes care of giving the core of JDFTx reversed lattice directions
//! and sample counts, and for all unit conversions (energies in eV, distances in Angstrom etc.)
//! @param Rx (in, 3-vector) First lattice direction
//! @param Ry (in, 3-vector) Second lattice direction
//! @param Rz (in, 3-vector) Third lattice direction
//! @param Sx (in, integer) Number of FFT points along first lattice direction
//! @param Sy (in, integer) Number of FFT points along second lattice direction
//! @param Sz (in, integer) Number of FFT points along third lattice direction
DeclareFortranFunction(initjdftx)(double* Rx, double* Ry, double* Rz, int* Sx, int* Sy, int* Sz)
{
//Open log file
globalLog = fopen("FLULOG", "w");
if(!globalLog)
{ globalLog = stdout;
logPrintf("WARNING: Could not open log file 'FLULOG' for writing, using standard output.\n");
}
//Initialize environment and print banner:
const char* execName = "N/A (Running as a shared library providing fluid solvers)";
initSystem(1, (char**)&execName);
//Write a wrapper input file:
FILE* fpWrap = fopen("FLUCAR.in", "w");
if(!fpWrap) die("Could not write input-file wrapper. JDFTx-VASP interface needs write access to current directory.\n");
fprintf(fpWrap,
"lattice \\\n"
" %.15lf %.15lf %.15lf \\\n"
" %.15lf %.15lf %.15lf \\\n"
" %.15lf %.15lf %.15lf \n"
"fftbox %d %d %d\n"
"elec-cutoff 0\n"
"symmetries none\n"
"include FLUCAR\n",
Rz[0]*Angstrom, Ry[0]*Angstrom, Rx[0]*Angstrom,
Rz[1]*Angstrom, Ry[1]*Angstrom, Rx[1]*Angstrom,
Rz[2]*Angstrom, Ry[2]*Angstrom, Rx[2]*Angstrom,
*Sz, *Sy, *Sx);
fclose(fpWrap);
//Initialize system:
parse("FLUCAR.in", e);
system("rm FLUCAR.in");
if(e.eVars.fluidParams.fluidType == FluidNone) die("No fluid model specified in FLUCAR.\n");
if(e.iInfo.ionWidthMethod == IonInfo::IonWidthEcut)
{ logPrintf("JDFTx interface does not have access to VASP energy cutoff:\n"
"\tUsing FFTbox to determine nuclear width instead.\n");
e.iInfo.ionWidthMethod = IonInfo::IonWidthFFTbox;
}
e.setup();
Citations::add("JDFTx-VASP interface",
"K. Mathew, R. Sundararaman, K. Letchworth-Weaver, T.A. Arias and R.G. Hennig (under preparation)");
Citations::print();
}
void CruiseEngine::initialize() {
PCFadeFlag = 0;
_gameSpeed = GAME_FRAME_DELAY_1;
_speedFlag = false;
/*volVar1 = 0;
* fileData1 = 0; */
/*PAL_fileHandle = -1; */
// video init stuff
initSystem();
gfxModuleData_Init();
// another bit of video init
readVolCnf();
_vm->_polyStruct = NULL;
}
myWizard::myWizard(QWidget *parent) :
QDialog(parent),
ui(new Ui::myWizard)
{
setWindowFlags(Qt::FramelessWindowHint|Qt::WindowStaysOnTopHint);
setWindowFlags(Qt::FramelessWindowHint);
setWindowOpacity(1);
ui->setupUi(this);
QTextCodec::setCodecForCStrings(QTextCodec::codecForName("GBK"));
QTextCodec::setCodecForLocale(QTextCodec::codecForName("GBK"));
QTextCodec::setCodecForTr(QTextCodec::codecForName("GBK"));
ui->label_show_gif->setHidden(true);
ui->label_show_info->setHidden(true);
ui->comboBox_phone_brife->setHidden(true);
ui->comboBox_phone_detail->setHidden(true);
ui->pushButton_complete->setHidden(true);
ui->pushButton_set_phone->setHidden(true);
ui->lineEdit_pass_confirm->setHidden(true);
ui->lineEdit_other_phone->setHidden(true);
ui->lineEdit_mail->setHidden(true);
initSystem();
}
//----------------------------------------------------------
// Main entry point
//----------------------------------------------------------
int main(void)
{
initSystem();
// ------------------------------------------
#ifdef USE_THREADS
MESSAGE("Using threads");
// never returns
startThreads(appMain, systemMain);
// if we're here, something went wrong
ASSERT(!"systemMain returned?!");
// ------------------------------------------
#else
ENABLE_INTS();
#ifdef USE_PROTOTHREADS
startProtoSched();
#else
MESSAGE("Not using threads");
appMain();
#endif
//
// Do not allow to return from this function. The reason:
// GCC 4.5+ disables interrupts after completion of main() function,
// but MansOS applications may want to return from appMain()
// and do all the "real work" in interrupt handlers.
// Therefore, interrupts must be kept enabled.
//
for (;;) {}
#endif // USE_THREADS
return 0;
}
// A process dispatcher program
// @par: int number of arguments
// @par: pointer pointer process list file
// @ret: int
int main(int argc, char **argv) {
if (argc != 2) {
// Print directions if the file is not supplied and exit
printf("You must supply a file to the program:\n"
"$ hostd filename.txt\n");
exit(0);
}
initSystem();
char *filename = argv[1];
readFile(filename, dispatcher);
if (VERBOSE) printf("Done processing %s!\n", filename);
// Set CPU start time to 0
int time = 0;
// Flag when a real time process is added to the real time queue
int rtUpdated;
// The system is running
/*while (time < runtime) {*/
while (time < 20) {
printf("===============================================================================================================================\n");
printf("Time (Quantum): %d\n", time);
printf("===============================================================================================================================\n");
rtUpdated = updateDispatcher(time);
if (VERBOSEMEMMAP) {
printf("Current %d MByte memory map (each line is 64 Mbyte).\n", host.memSpaceMax);
int memUnit;
for(memUnit = 0; memUnit < MAX_MEMSPACE; memUnit++) {
if (host.memSpace[memUnit] != 0) {
printf("%d ", host.memSpace[memUnit]);
} else {
if (memUnit < MAX_RTMEMSPACE) {
printf(". ");
} else {
printf("_ ");
}
}
if ((memUnit + 1) % 64 == 0) {
printf("\n");
}
}
printf("\n");
}
if (VERBOSEQ) {
printf("REAL TIME QUEUE: ");
printQueue(realTimeQueue);
printf("PRIORITY 1 QUEUE: ");
printQueue(p1Queue);
printf("PRIORITY 2 QUEUE: ");
printQueue(p2Queue);
printf("PRIORITY 3 QUEUE: ");
printQueue(p3Queue);
//TODO
//print info about system resources and per process resources?
}
doProcessing(time, rtUpdated);
time++;
sleep(1);
printf("\n");
}
printf("===============================================================================================================================\n");
printf("Time (Quantum): %d, program terminating\n", time);
printf("===============================================================================================================================\n");
closeSystem();
return 0;
}
int main(int argc, char** argv)
{ initSystem(argc, argv);
//Parse command-line
S2quadType quadType = QuadEuler;
int nBeta = 12;
if(argc > 1)
{ if(!S2quadTypeMap.getEnum(argv[1], quadType))
die("<quad> must be one of %s\n", S2quadTypeMap.optionList().c_str());
if(quadType==QuadEuler)
{ if(argc < 3) die("<nBeta> must be specified for Euler quadratures.\n")
nBeta = atoi(argv[2]);
if(nBeta <= 0) die("<nBeta> must be non-negative.")
}
}
//Setup simulation grid:
GridInfo gInfo;
gInfo.S = vector3<int>(1, 1, 4096);
const double hGrid = 0.0625;
gInfo.R = Diag(hGrid * gInfo.S);
gInfo.initialize();
double T = 298*Kelvin;
FluidComponent component(FluidComponent::H2O, T, FluidComponent::ScalarEOS);
component.s2quadType = quadType;
component.quad_nBeta = nBeta;
component.representation = FluidComponent::Pomega;
FluidMixture fluidMixture(gInfo, T);
component.addToFluidMixture(&fluidMixture);
double p = 1.01325*Bar;
logPrintf("pV = %le\n", p*gInfo.detR);
fluidMixture.initialize(p);
//Initialize external potential (repel O from a cube)
double Dfield = 1.0 * eV/Angstrom;
const double zWall = 8.0 - 1e-3;
const double& gridLength = gInfo.R(2,2);
ScalarField phiApplied(ScalarFieldData::alloc(gInfo)), phiWall(ScalarFieldData::alloc(gInfo));
applyFunc_r(gInfo, setPhi, phiApplied->data(), phiWall->data(), gridLength, Dfield, zWall);
const double ZO = component.molecule.sites[0]->chargeKernel(0);
component.idealGas->V[0] = ZO * phiApplied + phiWall;
component.idealGas->V[1] = -0.5*ZO * phiApplied + phiWall;
//----- Initialize state -----
fluidMixture.initState(0.01);
//----- FDtest and CG -----
MinimizeParams mp;
mp.fpLog = globalLog;
mp.nDim = gInfo.nr * fluidMixture.get_nIndep();
mp.energyLabel = "Phi";
mp.nIterations=1500;
mp.energyDiffThreshold=1e-16;
fluidMixture.minimize(mp);
//------ Outputs ---------
ostringstream quadName;
quadName << S2quadTypeMap.getString(quadType);
if(quadType == QuadEuler) quadName << nBeta;
ScalarFieldArray N;
fluidMixture.getFreeEnergy(FluidMixture::Outputs(&N));
FILE* fp = fopen((quadName.str()+".Nplanar").c_str(), "w");
double* NOdata = N[0]->data();
double* NHdata = N[1]->data();
double nlInv = 1./component.idealGas->get_Nbulk();
for(int i=0; i<gInfo.S[2]/2; i++)
fprintf(fp, "%le\t%le\t%le\n", i*hGrid, nlInv*NOdata[i], 0.5*nlInv*NHdata[i]);
fclose(fp);
finalizeSystem();
return 0;
}
int main(int argc, char** argv)
{
/*
* Initialize the memory allocator. Allow use of malloc and start
* with a 60K heap. For each page request approx 8KB is allocated.
* 60KB allows for several concurrent page requests. If more space
* is required, malloc will be used for the overflow.
*/
bopen(NULL, (60 * 1024), B_USE_MALLOC);
signal(SIGPIPE, SIG_IGN);
if (writeGoPid() < 0)
return -1;
if (initSystem() < 0)
return -1;
/*
* Initialize the web server
*/
if (initWebs() < 0) {
return -1;
}
#ifdef CONFIG_DUAL_IMAGE
/* Set stable flag after the web server is started */
set_stable_flag();
#endif
#ifdef WEBS_SSL_SUPPORT
websSSLOpen();
#endif
/*
* Basic event loop. SocketReady returns true when a socket is ready for
* service. SocketSelect will block until an event occurs. SocketProcess
* will actually do the servicing.
*/
while (!finished) {
if (socketReady(-1) || socketSelect(-1, 1000)) {
socketProcess(-1);
}
websCgiCleanup();
emfSchedProcess();
}
#ifdef WEBS_SSL_SUPPORT
websSSLClose();
#endif
#ifdef USER_MANAGEMENT_SUPPORT
umClose();
#endif
/*
* Close the socket module, report memory leaks and close the memory allocator
*/
websCloseServer();
socketClose();
#ifdef B_STATS
memLeaks();
#endif
bclose();
return 0;
}
int Model::Heuristic()
{
_start = clock();
initSystem();
for (t = 0; t < T; t++){
for (v = 0; v < nVeh; v++){
sys.vehicle[v].assigned = false; //assigned is false by default: true if either assigned at the current time or moving
}
for (k = 0; k < nArc; k++){
if (arc[k].from == arc[k].to) continue;
if (t) sys.Demand[t][k] += sys.Demand[t - 1][k];
if (!(sys.Demand[t][k])) continue;
for (v = 0; v < nVeh; v++){
if (sys.vehicle[v].to != arc[k].from) continue; //don't assign the vehicle if it is not in the station
if (sys.vehicle[v].time != t){ //don't use the vehicle if it is moving
sys.vehicle[v].assigned = true;
continue;
}
if (sys.vehicle[v].powLvl < arc[k].fcost + min(sys.Demand[t][k], sys.vehicle[v].cap) * arc[k].cost) continue; //don't use the vehicle if battery level is not enough
if (!(sys.Demand[t][k])) break; //break if demand is none
bool overload = false;
for (vector<int>::iterator itr = arc[k].track.begin(); itr != arc[k].track.end(); itr++){
tau = t + abs(track[*itr].from - arc[k].from);
if (tau < T && sys.TrackLoad[*itr][tau] >= maxL){
overload = true;
break;
}
}
if (overload) break;
sys.route[k][v][t] = 1; //assign the vehicle which is available
sys.customer[k][v][t] = min(sys.Demand[t][k], sys.vehicle[v].cap); //the number of customers sent out
sys.vehicle[v].powLvl -= arc[k].fcost + arc[k].cost * sys.customer[k][v][t]; //update vehicle status: battery level
sys.vehicle[v].to = arc[k].to; //update vehicle status: arriving station
sys.vehicle[v].time = t + arc[k].time; //update vehicle status: arriving time
sys.vehicle[v].assigned = true; //update vehicle status: assigned or not
sys.Demand[t][k] -= sys.customer[k][v][t]; //update demand
for (vector<int>::iterator itr = arc[k].track.begin(); itr != arc[k].track.end(); itr++){ //update track load
tau = t + abs(track[*itr].from - arc[k].from);
if (tau < T) sys.TrackLoad[*itr][tau]++;
}
}
}
for (k = 0; k < nArc; k++){
if (arc[k].from != arc[k].to) continue;
for (v = 0; v < nVeh; v++){
if (!(sys.vehicle[v].assigned) && sys.vehicle[v].to == arc[k].to && sys.vehicle[v].time == t){
sys.route[k][v][t] = 1; //stay in the station if the vehicle is not assigned toward any other stations
sys.NodeLoad[arc[k].to][t]++; //update node load
sys.vehicle[v].time = t + 1; //update time
sys.vehicle[v].powLvl += maxC;
}
}
}
//if node load maximum is reached -- cancel vehicles toward this station and/or cancel previous route
}
// compute the total cost
sys.cost = 0;
for (k = 0; k < nArc; k++){
if (arc[k].from == arc[k].to) continue;
for (t = 0; t < T; t++){
int val_y = sys.Demand[t][k];
for (v = 0; v < nVeh; v++){
sys.cost += arc[k].fcost * sys.route[k][v][t] + arc[k].cost * sys.customer[k][v][t];
for (tau = t + 1; tau <= t + TimeWindow && tau < T; tau++){
val_y -= sys.customer[k][v][tau];
}
}
val_y = max(val_y, 0);
sys.cost += penalty * arc[k].cost * val_y;
}
}
for (v = 0; v < nVeh; v++){
double rCost = 0;
for (k = 0; k < nArc; k++){
for (t = 0; t < T; t++){
rCost += arc[k].fcost * sys.route[k][v][t] + arc[k].cost * sys.customer[k][v][t];
}
}
sys.routeCost.push_back(rCost);
}
_end = clock();
cmp_time = (double)(_end - _start) / CLOCKS_PER_SEC;
sprintf(path, "%soutput/heuristic_%dV_%dN_%dArc_%dT.txt", directoryPath.c_str(), nVeh, N, nArc, T);
heuristicSol();
return 1;
}
//################ Droplet on attractive wall ####################
int main(int argc, char** argv)
{ initSystem(argc, argv);
GridInfo gInfo;
gInfo.S = vector3<int>(64, 64, 64); double hGrid=1.0;
//gInfo.S = vector3<int>(128, 128, 128); double hGrid=0.5;
gInfo.R = Diag(gInfo.S * hGrid);
gInfo.initialize();
double T = 298*Kelvin;
FluidComponent component(FluidComponent::H2O, T, FluidComponent::ScalarEOS);
component.s2quadType = QuadOctahedron;
component.Nnorm = 270;
PreconditionedFluidMixture fluidMixture(gInfo, T, 1.0);
component.addToFluidMixture(&fluidMixture);
double p = 1.01325*Bar;
logPrintf("pV = %le\n", p*gInfo.detR);
fluidMixture.initialize(p);
#define geomName "AttractiveWall-3bohr-3.0kT/drop_plane"
bool loadState=false;
const char stateFilename[] = "TestFixedN/" geomName "_state.bin";
//Initialize potential: planar wall with attractive well:
nullToZero(component.idealGas->V, gInfo);
double xWall = 0.5*gInfo.R(0,0)-21.0;
double dxWall = 2.0;
applyFunc_r(gInfo, initAttractiveWall, xWall, dxWall, 100*T, 3.*T, component.idealGas->V[0]->data());
if(loadState)
fluidMixture.loadState(stateFilename);
else
{ //Initialize state biased towards center of cell
const double muSet=-5.0;
const double Rdroplet = 22.0; //guess droplet size:
nullToZero(fluidMixture.state, gInfo, fluidMixture.get_nIndep());
applyFunc_r(gInfo, initSphere, gInfo.R*vector3<>(0.5,0.5,0.5), Rdroplet, 0.0, muSet, fluidMixture.state[0]->data());
RealKernel gauss(gInfo); initGaussianKernel(gauss, 2.0);
fluidMixture.state[0] = I(gauss*J(fluidMixture.state[0]));
ScalarField wallMask(ScalarFieldData::alloc(gInfo));
applyFunc_r(gInfo, initAttractiveWall, xWall, 2*dxWall, 0.0, 1.0, wallMask->data());
fluidMixture.state[0] *= (wallMask+1.0);
}
MinimizeParams mp;
mp.fpLog = globalLog;
mp.nDim = 2*gInfo.nr;
mp.nIterations=10;
mp.knormThreshold=1e-11;
mp.dirUpdateScheme = MinimizeParams::FletcherReeves;
//mp.dirUpdateScheme = MinimizeParams::SteepestDescent;
//mp.updateTestStepSize = false;
mp.fdTest = !loadState;
int sysRet=system("mkdir -p TestFixedN/" geomName "_img");
if(sysRet) { logPrintf("Error making image directory\n"); mpiUtil->exit(sysRet); }
for(int loopCount=0; loopCount<100; loopCount++)
{
ScalarFieldArray N;
TIME("getOmega calculation (with gradient)", globalLog,
double omega = fluidMixture.getFreeEnergy(FluidMixture::Outputs(&N));
if(std::isnan(omega)) break; //Don't save state after it has become nan
);
logPrintf("Ntot = %lf\n", gInfo.dV*sum(N[0]));
logPrintf("Saving state:\n");
fluidMixture.saveState(stateFilename);
saveDX(N[0], "TestFixedN/" geomName "_nO");
saveDX(N[1], "TestFixedN/" geomName "_nH");
saveSphericalized(&N[0], 2, "TestFixedN/" geomName "_n.spherical", 0.25);
//Invoke octave to create an image:
FILE* pp = popen("octave -q", "w");
fprintf(pp, "imwrite( waterSlice(\"TestFixedN/" geomName "_n%%s.bin\", [%d %d %d], 1, %d, 1e-2),", gInfo.S[0], gInfo.S[1], gInfo.S[2], gInfo.S[2]/2);
fprintf(pp, " \"TestFixedN/" geomName "_img/img%04d.png\"); exit;\n", loopCount);
fflush(pp); pclose(pp);
logPrintf("Starting CG:\n");
TIME("minimize", globalLog,
fluidMixture.minimize(mp);
);
int main(int argc, char *argv[]) {
int ret = EXIT_SUCCESS; /* return value */
/* check parameter */
if (argc < 2) {
fprintf(stderr, "ERROR: You need to give some command.\n");
showHelp();
return (EXIT_FAILURE);
}
initSystem();
if (gSystem == SYSTEM_ERROR) {
fprintf(stderr, "ERROR: No package-system found (yum, apt).\n");
exit(EXIT_FAILURE);
}
initCommand(argv[1]);
initList(argc - 2, (char **)argv + 2);
switch (gCommand) {
case COMMAND_HELP:
showHelp();
break;
case COMMAND_VERSION:
showVersion();
break;
case COMMAND_INSTALL:
if (gList == NULL) {
fprintf(stderr, "Error: Need to pass a list of pkgs to install.\n");
showHelp();
ret = EXIT_FAILURE;
break;
}
doInstall();
break;
case COMMAND_REMOVE:
if (gList == NULL) {
fprintf(stderr, "Error: Need to pass a list of pkgs to remove.\n");
showHelp();
ret = EXIT_FAILURE;
break;
}
doRemove();
break;
case COMMAND_SEARCH:
if (gList == NULL) {
fprintf(stderr, "Error: Need to pass a list of pkgs to search.\n");
showHelp();
ret = EXIT_FAILURE;
break;
}
doSearch();
break;
case COMMAND_LIST:
if (gList == NULL) {
fprintf(stderr, "Error: Need to pass a list of pkgs to lisst.\n");
showHelp();
ret = EXIT_FAILURE;
break;
}
doList();
break;
case COMMAND_UPDATE:
if (gList == NULL) {
fprintf(stderr, "Error: Need to pass a list of pkgs to update.\n");
showHelp();
ret = EXIT_FAILURE;
break;
}
doUpdate();
break;
default:
fprintf(stderr, "ERROR: No such command '%s'. Please use '%s --help'.\n", argv[1], PRG_NAME);
ret = EXIT_FAILURE;
}
destroy();
return (ret);
}
static void LaplacianDeformModifier_do(
LaplacianDeformModifierData *lmd, Object *ob, DerivedMesh *dm,
float (*vertexCos)[3], int numVerts)
{
float (*filevertexCos)[3];
int sysdif;
LaplacianSystem *sys = NULL;
filevertexCos = NULL;
if (!(lmd->flag & MOD_LAPLACIANDEFORM_BIND)) {
if (lmd->cache_system) {
sys = lmd->cache_system;
deleteLaplacianSystem(sys);
lmd->cache_system = NULL;
}
lmd->total_verts = 0;
MEM_SAFE_FREE(lmd->vertexco);
return;
}
if (lmd->cache_system) {
sysdif = isSystemDifferent(lmd, ob, dm, numVerts);
sys = lmd->cache_system;
if (sysdif) {
if (sysdif == LAPDEFORM_SYSTEM_ONLY_CHANGE_ANCHORS || sysdif == LAPDEFORM_SYSTEM_ONLY_CHANGE_GROUP) {
filevertexCos = MEM_mallocN(sizeof(float[3]) * numVerts, "TempModDeformCoordinates");
memcpy(filevertexCos, lmd->vertexco, sizeof(float[3]) * numVerts);
MEM_SAFE_FREE(lmd->vertexco);
lmd->total_verts = 0;
deleteLaplacianSystem(sys);
lmd->cache_system = NULL;
initSystem(lmd, ob, dm, filevertexCos, numVerts);
sys = lmd->cache_system; /* may have been reallocated */
MEM_SAFE_FREE(filevertexCos);
if (sys) {
laplacianDeformPreview(sys, vertexCos);
}
}
else {
if (sysdif == LAPDEFORM_SYSTEM_CHANGE_VERTEXES) {
modifier_setError(&lmd->modifier, "Vertices changed from %d to %d", lmd->total_verts, numVerts);
}
else if (sysdif == LAPDEFORM_SYSTEM_CHANGE_EDGES) {
modifier_setError(&lmd->modifier, "Edges changed from %d to %d", sys->total_edges, dm->getNumEdges(dm));
}
else if (sysdif == LAPDEFORM_SYSTEM_CHANGE_NOT_VALID_GROUP) {
modifier_setError(&lmd->modifier, "Vertex group '%s' is not valid", sys->anchor_grp_name);
}
}
}
else {
sys->repeat = lmd->repeat;
laplacianDeformPreview(sys, vertexCos);
}
}
else {
if (lmd->total_verts > 0 && lmd->total_verts == numVerts) {
if (isValidVertexGroup(lmd, ob, dm)) {
filevertexCos = MEM_mallocN(sizeof(float[3]) * numVerts, "TempDeformCoordinates");
memcpy(filevertexCos, lmd->vertexco, sizeof(float[3]) * numVerts);
MEM_SAFE_FREE(lmd->vertexco);
lmd->total_verts = 0;
initSystem(lmd, ob, dm, filevertexCos, numVerts);
sys = lmd->cache_system;
MEM_SAFE_FREE(filevertexCos);
laplacianDeformPreview(sys, vertexCos);
}
}
else {
if (isValidVertexGroup(lmd, ob, dm)) {
initSystem(lmd, ob, dm, vertexCos, numVerts);
sys = lmd->cache_system;
laplacianDeformPreview(sys, vertexCos);
}
}
}
if (sys->is_matrix_computed && !sys->has_solution) {
modifier_setError(&lmd->modifier, "The system did not find a solution");
}
}
int Model::Heuristic2()
{
_start = clock();
initSystem();
for (t = 0; t < T; t++){
//sort the arcs according to its demand
vector<pair<int, double>> ArcDmd;
for (k = 0; k < nArc; k++){
if (arc[k].from == arc[k].to) continue;
if (t) sys.Demand[t][k] += sys.Demand[t - 1][k];
ArcDmd.push_back(pair<int, double>(k, penalty * arc[k].cost * sys.Demand[t][k]));
}
sort(ArcDmd.begin(), ArcDmd.end(),
[](const pair<int, double>& lhs, const pair<int, double>& rhs) {
return lhs.second > rhs.second; });
//sort the vehicle battery level
vector<pair<int, double>> Elvl;
for (v = 0; v < nVeh; v++){
sys.vehicle[v].assigned = false; //reset all vehicles
Elvl.push_back(pair<int, double>(v, sys.vehicle[v].powLvl));
}
sort(Elvl.begin(), Elvl.end(),
[](const pair<int, double>& lhs, const pair<int, double>& rhs) {
return lhs.second > rhs.second; });
for (vector<pair<int, double>>::iterator vecItr = ArcDmd.begin(); vecItr != ArcDmd.end(); vecItr++){
k = vecItr->first;
if (arc[k].from == arc[k].to) continue;
if (!(sys.Demand[t][k])) continue;
for (vector<pair<int, double>>::iterator vecItr2 = Elvl.begin(); vecItr2 != Elvl.end(); vecItr2++){
v = vecItr2->first;
if (sys.vehicle[v].to != arc[k].from) continue; //don't assign the vehicle if it is not in the station
if (sys.vehicle[v].time != t){ //don't use the vehicle if it is moving
sys.vehicle[v].assigned = true;
continue;
}
if (sys.vehicle[v].powLvl < arc[k].fcost + min(sys.Demand[t][k], sys.vehicle[v].cap) * arc[k].cost) continue; //don't use the vehicle if battery level is not enough
if (!(sys.Demand[t][k])) break; //break if demand is none
bool overload = false;
for (vector<int>::iterator itr = arc[k].track.begin(); itr != arc[k].track.end(); itr++){
tau = t + abs(track[*itr].from - arc[k].from);
if (tau < T && sys.TrackLoad[*itr][tau] >= maxL){
overload = true;
break;
}
}
if (overload) break; //no more vehicle assignment for this arc if overloaded
sys.route[k][v][t] = 1; //assign the vehicle which is available
sys.customer[k][v][t] = min(sys.Demand[t][k], sys.vehicle[v].cap); //the number of customers sent out
sys.vehicle[v].powLvl -= arc[k].fcost + arc[k].cost * sys.customer[k][v][t]; //update vehicle status: battery level
sys.vehicle[v].to = arc[k].to; //update vehicle status: arriving station
sys.vehicle[v].time = t + arc[k].time; //update vehicle status: arriving time
sys.vehicle[v].assigned = true; //update vehicle status: assigned or not
sys.Demand[t][k] -= sys.customer[k][v][t]; //update demand
for (vector<int>::iterator itr = arc[k].track.begin(); itr != arc[k].track.end(); itr++){ //update track load
tau = t + abs(track[*itr].from - arc[k].from);
if (tau < T) sys.TrackLoad[*itr][tau]++;
}
}
}
for (k = 0; k < nArc; k++){
if (arc[k].from != arc[k].to) continue;
for (v = 0; v < nVeh; v++){
if (!(sys.vehicle[v].assigned) && sys.vehicle[v].to == arc[k].to && sys.vehicle[v].time == t){
sys.route[k][v][t] = 1; //stay in the station if the vehicle is not assigned toward any other stations
sys.NodeLoad[arc[k].to][t]++; //update node load
sys.vehicle[v].time = t + 1; //update time
sys.vehicle[v].powLvl += maxC; //update battery level
}
}
}
//if node load maximum is reached -- cancel vehicles toward this station and/or cancel previous route
}
// compute the total cost
sys.cost = 0;
for (k = 0; k < nArc; k++){
if (arc[k].from == arc[k].to) continue;
for (t = 0; t < T; t++){
int val_y = sys.Demand[t][k];
for (v = 0; v < nVeh; v++){
sys.cost += arc[k].fcost * sys.route[k][v][t] + arc[k].cost * sys.customer[k][v][t];
for (tau = t + 1; tau <= t + TimeWindow && tau < T; tau++){
val_y -= sys.customer[k][v][tau];
}
}
val_y = max(val_y, 0);
sys.cost += penalty * arc[k].cost * val_y;
}
}
for (v = 0; v < nVeh; v++){
double rCost = 0;
for (k = 0; k < nArc; k++){
for (t = 0; t < T; t++){
rCost += arc[k].fcost * sys.route[k][v][t] + arc[k].cost * sys.customer[k][v][t];
}
}
sys.routeCost.push_back(rCost);
}
_end = clock();
cmp_time = (double)(_end - _start) / CLOCKS_PER_SEC;
sprintf(path, "%soutput/heuristic2_%dV_%dN_%dArc_%dT.txt", directoryPath.c_str(), nVeh, N, nArc, T);
heuristicSol();
return 1;
}
/*********************************************************************//*!
* @brief The main program
*
* Opens the camera and reads pictures as fast as possible
* Makes a debayering of the image
* Writes the debayered image to a buffer which can be read by
* TCP clients on Port 8111. Several concurrent clients are allowed.
* The simplest streaming video client looks like this:
*
* nc 192.168.1.10 8111 | mplayer - -demuxer rawvideo -rawvideo w=376:h=240:format=bgr24:fps=100
*
* Writes every 10th picture to a .jpg file in the Web Server Directory
*//*********************************************************************/
int main(const int argc, const char * argv[])
{
struct OSC_PICTURE calcPic;
struct OSC_PICTURE rawPic;
unsigned char *tmpbuf;
int loops=0;
int numalarm=0;
char filename[100];
initSystem(&sys);
ip_start_server();
/* setup variables */
rawPic.width = OSC_CAM_MAX_IMAGE_WIDTH;
rawPic.height = OSC_CAM_MAX_IMAGE_HEIGHT;
rawPic.type = OSC_PICTURE_GREYSCALE;
/* calcPic width, height etc. are set in the debayering algos */
calcPic.data = malloc(3 * OSC_CAM_MAX_IMAGE_WIDTH * OSC_CAM_MAX_IMAGE_HEIGHT);
if (calcPic.data == 0)
fatalerror("Did not get memory\n");
tmpbuf = malloc(500000);
if (tmpbuf == 0)
fatalerror("Did not get memory\n");
#if defined(OSC_TARGET)
/* Take a picture, first time slower ;-) */
usleep(10000); OscGpioTriggerImage(); usleep(10000);
OscLog(DEBUG,"Triggered CAM ");
#endif
while(true) {
OscCamReadPicture(OSC_CAM_MULTI_BUFFER, (void *) &rawPic.data, 0, 0);
/* Take a picture */
usleep(2000);
OscCamSetupCapture(OSC_CAM_MULTI_BUFFER);
#if defined(OSC_TARGET)
OscGpioTriggerImage();
#else
usleep(10000);
#endif
if (is_alarm(&rawPic)) {
OscGpioSetTestLed(TRUE);
printf("alarm\n");
sprintf(filename, "/home/httpd/alarm_pic%02i.jpg", numalarm%16);
writeJPG(&calcPic, tmpbuf, filename);
numalarm++;
} else {
OscGpioSetTestLed(FALSE);
}
fastdebayerBGR(rawPic, &calcPic, NULL);
ip_send_all((char *)calcPic.data, calcPic.width*calcPic.height*
OSC_PICTURE_TYPE_COLOR_DEPTH(calcPic.type)/8);
loops+=1;
if (loops%20 == 0) {
writeJPG(&calcPic, tmpbuf, "/home/httpd/liveimage.jpg");
}
ip_do_work();
}
ip_stop_server();
cleanupSystem(&sys);
return 0;
} /* main */
int main(void)
{
/* Initialize System */
initSystem();
/* switch Spektrum Receiver ON */
/* no Bind at the moment */
*SPEKTRUM_BIND = 1;
/* Init virtual EEPROM */
initEEPROM();
print_uart1("CorvusM3 FC - Version 0.1\r\n");
// for test
//char x [80];
//sprintf(x,"%d:%d:%d\r\n",smoothValue(100,150,0),smoothValue(100,150,100),smoothValue(100,150,40));
//print_uart1(x);
// read sensors for calibration
setLEDStatus(LED_FLASH);
// read parameters from flash
loadParameter();
// function open ....
setLEDStatus(LED_BLINK);
// Controlloop --> statemachine() --> Timer 3
TIM_ITConfig(TIM3, TIM_IT_Update, ENABLE);
while (1)
{
// test accu
if (getParameter(PARA_VOLT) > ADCSensorValue[VOLT])
{
// low accu
errorCode |= ERROR_AKKU; // set bit
}
else
{
// accu OK
errorCode &= ~ERROR_AKKU; // delete bit
}
// if something in RxBuffer
if (is_read_uart1())
{
getComm();
}
/* Debug Output 20Hz ---------------------------------------------------*/
if (msCount % 50 == 0)
{
doDebug();
// for test
//char x [80];
//sprintf(x,"%d\r\n",errorCode);
//print_uart1(x);
}
/* do LED -----------------------------------------------------------*/
if (errorCode == 0)
{
setLEDStatus(LED_ON);
}
else if (errorCode < 2) // akku
{
setLEDStatus(LED_BLINK);
}
else if (errorCode < 8) // rc and sensor
{
setLEDStatus(LED_FLASH);
}
}
}
int main(void){
state currentState = STATE_MM1;
action actionToDo = NO_ACTION;
// FSM state/action matrix
stateElement stateMatrix[7][8] = {
// MM1
{{STATE_MM1, NO_ACTION}, {STATE_OFF, SWITCH_OFF}, {STATE_CHARGING, CHARGING}, {STATE_MM1, NO_ACTION}, {STATE_MM2, SHOW_MM2}, {STATE_MM2, SHOW_MM2}, {STATE_MM1, NO_ACTION}, {STATE_HISTORY, SHOW_HISTORY}},
// OFF
{{STATE_MM1, SHOW_MM1}, {STATE_OFF, NO_ACTION}, {STATE_OFF, NO_ACTION}, {STATE_OFF, NO_ACTION}, {STATE_OFF, NO_ACTION}, {STATE_OFF, NO_ACTION}, {STATE_OFF, NO_ACTION}, {STATE_OFF, NO_ACTION}},
// CHARING
{{STATE_CHARGING, NO_ACTION}, {STATE_CHARGING, NO_ACTION}, {STATE_CHARGING, NO_ACTION}, {STATE_MM1, SHOW_MM1}, {STATE_CHARGING, NO_ACTION}, {STATE_CHARGING, NO_ACTION}, {STATE_CHARGING, UPDATE_CHARGE}, {STATE_CHARGING, NO_ACTION}},
// MM2
{{STATE_MM2, NO_ACTION}, {STATE_OFF, SWITCH_OFF}, {STATE_CHARGING, CHARGING}, {STATE_MM2, NO_ACTION}, {STATE_MM1, SHOW_MM1}, {STATE_MM1, SHOW_MM1}, {STATE_MM2, NO_ACTION}, {STATE_RECORD, SHOW_RECORD}},
// HISTORY
{{STATE_HISTORY, NO_ACTION}, {STATE_OFF, SWITCH_OFF}, {STATE_CHARGING, CHARGING}, {STATE_HISTORY, NO_ACTION}, {STATE_SHOWLAP, SHOW_NEXT_LENGTH}, {STATE_SHOWLAP, SHOW_PREV_LENGTH}, {STATE_HISTORY, NO_ACTION}, {STATE_MM1, SHOW_MM1}},
// SHOWLAP
{{STATE_SHOWLAP, NO_ACTION}, {STATE_OFF, SWITCH_OFF}, {STATE_CHARGING, CHARGING}, {STATE_HISTORY, NO_ACTION}, {STATE_SHOWLAP, SHOW_NEXT_LENGTH}, {STATE_SHOWLAP, SHOW_PREV_LENGTH}, {STATE_HISTORY, NO_ACTION}, {STATE_HISTORY, SHOW_HISTORY}},
// RECORD
{{STATE_RECORD, NO_ACTION}, {STATE_OFF, SWITCH_OFF}, {STATE_CHARGING, CHARGING}, {STATE_RECORD, NO_ACTION}, {STATE_MM1, SHOW_MM1}, {STATE_MM1, SHOW_MM1}, {STATE_RECORD, UPDATE_RECORD}, {STATE_RECORD, ADD_LENGTH}}
};
initSystem();
showMM1();
while(1){
event e = getEvent();
// Obtain the next action
stateElement stateEvaluation = stateMatrix[currentState][e];
currentState = stateEvaluation.nextState;
actionToDo = stateEvaluation.actionToDo;
switch(actionToDo){
case NO_ACTION:
break;
case SHOW_MM1:
getBatteryPercentage();
showMM1();
break;
case SWITCH_OFF:
getBatteryPercentage();
showOffScreen();
_delay_ms(2000);
switchOff();
break;
case CHARGING:
initTimer();
getBatteryPercentage();
showChargingScreen();
break;
case SHOW_MM2:
getBatteryPercentage();
showMM2();
break;
case UPDATE_CHARGE:
getBatteryPercentage();
showChargingScreen();
break;
case SHOW_HISTORY:
showHistoryTotal();
break;
case SHOW_NEXT_LENGTH:
getNextLength();
showLength();
break;
case SHOW_PREV_LENGTH:
getPreviousLength();
showLength();
break;
case SHOW_RECORD:
initTimer();
currentLength = 0;
totLenTime = 0;
showRecordScreen();
break;
case UPDATE_RECORD:
totLenTime++;
curLenTime++;
showRecordScreen();
break;
case ADD_LENGTH:
//curLenTime = 0;
recordCurrentLength();
showRecordScreen();
break;
default:
break;
}
}
}