int main(void) {
int i;
/* TODO: run test_printk() */
/*
test_printk();
*/
disable_interrupt();
init_pcbs();
setup_irq(8, irq0_handle);
setup_irq(0x80, irq1_handle);
setup_irq(9, keyboard_int);
/*
kthread_create(test1_a, stack1+KSTACK_SIZE);
kthread_create(test1_b, stack2+KSTACK_SIZE);
kthread_create(test1_c, stack3+KSTACK_SIZE);
kthread_create(test_thread_a, stack1+KSTACK_SIZE);
kthread_create(test_thread_b, stack2+KSTACK_SIZE);
kthread_create(test_msg_c, stack1+KSTACK_SIZE);
kthread_create(test_msg_d, stack2+KSTACK_SIZE);
kthread_create(test_thread_in_thread, stack1+KSTACK_SIZE);
*/
UserThread_create(0x2000);
kthread_create(tty_driver, stack2+KSTACK_SIZE);
enable_interrupt();
while (1) {
idle_cpu();
}
}
void init() {
struct pcb* p_kernel_pcb;
init_pcbs();
p_kernel_pcb = get_pcb(&p_free_pcb);
if (NULL == p_kernel_pcb)
return;
insert_pcb(&p_used_pcb, p_kernel_pcb);
p_kernel_pcb->stack = NULL;
p_pcb_now = p_kernel_pcb;
}
void
entry (unsigned long magic, unsigned long addr)
{
multiboot_info_t *mbi;
/* Clear the screen. */
clear();
/* Am I booted by a Multiboot-compliant boot loader? */
if (magic != MULTIBOOT_BOOTLOADER_MAGIC)
{
printf ("Invalid magic number: 0x%#x\n", (unsigned) magic);
return;
}
/* Set MBI to the address of the Multiboot information structure. */
mbi = (multiboot_info_t *) addr;
/* Print out the flags. */
printf ("flags = 0x%#x\n", (unsigned) mbi->flags);
/* Are mem_* valid? */
if (CHECK_FLAG (mbi->flags, 0))
printf ("mem_lower = %uKB, mem_upper = %uKB\n",
(unsigned) mbi->mem_lower, (unsigned) mbi->mem_upper);
/* Is boot_device valid? */
if (CHECK_FLAG (mbi->flags, 1))
printf ("boot_device = 0x%#x\n", (unsigned) mbi->boot_device);
/* Is the command line passed? */
if (CHECK_FLAG (mbi->flags, 2))
printf ("cmdline = %s\n", (char *) mbi->cmdline);
void * zbigfs_location = NULL;
if (CHECK_FLAG (mbi->flags, 3)) {
int mod_count = 0;
int i;
module_t* mod = (module_t*)mbi->mods_addr;
while(mod_count < mbi->mods_count) {
printf("Module %d loaded at address: 0x%#x\n", mod_count, (unsigned int)mod->mod_start);
printf("Module %d ends at address: 0x%#x\n", mod_count, (unsigned int)mod->mod_end);
printf("First few bytes of module:\n");
for(i = 0; i < 16; i++) {
printf("0x%x ", *((char*)(mod->mod_start+i)));
}
printf("\n");
mod_count++;
mod++;
}
if (mod_count){
module_t* zbigfsmod = (module_t*)mbi->mods_addr;
zbigfs_location = (void *) zbigfsmod->mod_start;
} else {
printf("No module 0, zbigfs will FAIL!");
}
}
/* Bits 4 and 5 are mutually exclusive! */
if (CHECK_FLAG (mbi->flags, 4) && CHECK_FLAG (mbi->flags, 5))
{
printf ("Both bits 4 and 5 are set.\n");
return;
}
/* Is the section header table of ELF valid? */
if (CHECK_FLAG (mbi->flags, 5))
{
elf_section_header_table_t *elf_sec = &(mbi->elf_sec);
printf ("elf_sec: num = %u, size = 0x%#x,"
" addr = 0x%#x, shndx = 0x%#x\n",
(unsigned) elf_sec->num, (unsigned) elf_sec->size,
(unsigned) elf_sec->addr, (unsigned) elf_sec->shndx);
}
/* Are mmap_* valid? */
if (CHECK_FLAG (mbi->flags, 6))
{
memory_map_t *mmap;
printf ("mmap_addr = 0x%#x, mmap_length = 0x%x\n",
(unsigned) mbi->mmap_addr, (unsigned) mbi->mmap_length);
for (mmap = (memory_map_t *) mbi->mmap_addr;
(unsigned long) mmap < mbi->mmap_addr + mbi->mmap_length;
mmap = (memory_map_t *) ((unsigned long) mmap
+ mmap->size + sizeof (mmap->size)))
printf (" size = 0x%x, base_addr = 0x%#x%#x\n"
" type = 0x%x, length = 0x%#x%#x\n",
(unsigned) mmap->size,
(unsigned) mmap->base_addr_high,
(unsigned) mmap->base_addr_low,
(unsigned) mmap->type,
(unsigned) mmap->length_high,
(unsigned) mmap->length_low);
}
/* Construct an LDT entry in the GDT */
{
seg_desc_t the_ldt_desc;
the_ldt_desc.granularity = 0;
the_ldt_desc.opsize = 1;
the_ldt_desc.reserved = 0;
the_ldt_desc.avail = 0;
the_ldt_desc.present = 1;
the_ldt_desc.dpl = 0x0;
the_ldt_desc.sys = 0;
the_ldt_desc.type = 0x2;
SET_LDT_PARAMS(the_ldt_desc, &ldt, ldt_size);
ldt_desc_ptr = the_ldt_desc;
lldt(KERNEL_LDT);
}
/* Construct a TSS entry in the GDT */
{
seg_desc_t the_tss_desc;
the_tss_desc.granularity = 0;
the_tss_desc.opsize = 0;
the_tss_desc.reserved = 0;
the_tss_desc.avail = 0;
the_tss_desc.seg_lim_19_16 = TSS_SIZE & 0x000F0000;
the_tss_desc.present = 1;
the_tss_desc.dpl = 0x0;
the_tss_desc.sys = 0;
the_tss_desc.type = 0x9;
the_tss_desc.seg_lim_15_00 = TSS_SIZE & 0x0000FFFF;
SET_TSS_PARAMS(the_tss_desc, &tss, tss_size);
tss_desc_ptr = the_tss_desc;
tss.ldt_segment_selector = KERNEL_LDT;
tss.ss0 = KERNEL_DS;
tss.esp0 = 0x800000; //8MB
ltr(KERNEL_TSS);
}
//printf("Enabling Interrupts\n");
/* Init the PIC */
populate_idt();
i8259_init();
rtc_init();
outb(PIT_MODIFY_LOW | PIT_MODIFY_HIGH | PIT_MODE_2 ,PIT_CTRL_ADDR);
outb(PIT_DEFAULT_RATE_LOW,PIT_PORT0_CTRL_ADDR); //set low byte
outb(PIT_DEFAULT_RATE_HIGH,PIT_PORT0_CTRL_ADDR); //set high byte
/*
* pc speaker code from osdev
*
uint32_t Div;
uint8_t tmp;
//Set the PIT to the desired frequency
Div = 1193180 / 1000;
outb(0x43, 0xb6);
outb(0x42, (uint8_t) (Div) );
outb(0x42, (uint8_t) (Div >> 8));
//And play the sound using the PC speaker
tmp = inb(0x61);
if (tmp != (tmp | 3)) {
outb(0x61, tmp | 3);
}
*/
disable_irq(0);
/* Initialize devices, memory, filesystem, enable device interrupts on the
* PIC, any other initialization stuff... */
/* Enable interrupts */
/* Do not enable the following until after you have set up your
* IDT correctly otherwise QEMU will triple fault and simple close
* without showing you any output */
//Enable interrupts for the first time
printf("Enabling Interrupts\n");
sti();
//Initialize paging and mount the filesysem
init_paging();
printf("Mounting module 0 as read-only zbigfs filesystem\n");
zbigfs_mount(zbigfs_location);
//Initialize PCBs and then clear the terminal so it looks nice
init_pcbs();
term_clear();
/* Spin (nicely, so we don't chew up cycles) */
asm volatile(".1: hlt; jmp .1;");
}
