STATUS semBGive(SEM_ID semId)
{
/* RAIN_TCB* pOwner; */
int level = intLock();
if(!IS_CLASS(semId, semClassId))
{
intUnlock(level);
return (ERROR);
}
/*pOwner = semId->semOwner;*/
if(NULL == (semId->semOwner = (RAIN_TCB*)Q_FIRST(&semId->qHead)))
{
intUnlock(level);
}
else
{
kernelState = TRUE;
intUnlock(level);
kernelPendQGet(&semId->qHead);
kernelExit();
}
return (OK);
}
/*****************************************************************************
Prototype : MailBox_SpMsgWrite
Description : 专有邮箱读接口封装
Input :
ulAddr : 专有邮箱的偏移地址（从消息头开始的地址）
ulSize : 初始值的大小(以字节为单位)
pData : 数据信息(不包含消息头信息)
Return Value :
0: 表示操作成功
其他: 表示操作失败
*****************************************************************************/
u32 MailBox_SpMsgRead(u32 ulAddr,
u32 ulSize,
void* pData)
{
s32 key;
key = intLock();
/* 如果DSP已睡眠，表示邮箱中无数据 */
/* 如果DSP没睡眠，由锁中断保证不调度低功耗模块对DSP的下电处理 */
if(BSP_TRUE == BSP_MailBox_IsDspSleep()) /*lint !e746*/
{
intUnlock(key);
return ERR_MAILBOX_READ_NULL;
}
/* 判断当前消息是否已读走 */
if(0 == *((u32*)ulAddr))
{
intUnlock(key);
return ERR_MAILBOX_READ_NULL;
}
memcpy(pData, ((u8*)ulAddr + 4), ulSize);
/* 设置可以DSP可以读 */
*((u32*)ulAddr) = 0;
intUnlock(key);
return BSP_OK;
}
STATUS wdCancel
(
WDOG_ID wdId /* ID of watchdog to cancel */
)
{
int level = intLock (); /* LOCK INTERRUPTS */
if (OBJ_VERIFY (wdId, wdClassId) != OK)
{
intUnlock (level); /* UNLOCK INTERRUPTS */
return (ERROR);
}
#ifdef WV_INSTRUMENTATION
/* windview - level 1 event logging */
EVT_OBJ_1 (OBJ, wdId, wdClassId, EVENT_WDCANCEL, wdId);
#endif
if (kernelState)
{
intUnlock (level); /* UNLOCK INTERRUPTS */
workQAdd1 ((FUNCPTR)windWdCancel, (int)wdId);
}
else
{
kernelState = TRUE; /* KERNEL_ENT */
intUnlock (level); /* UNLOCK INTERRUPTS */
windWdCancel (wdId); /* cancel watchdog */
windExit (); /* KERNEL EXIT */
}
return (OK);
}
BOOLEAN uart_fifo_get_char
(
UART_FIFO_T *FifoCtx,
BYTE *charbuf // Place to put data retrieved from the fifo
)
{
// Protect the fifo manipulation operations from interrupts
UINT32 oldlevel = intLock();
// Is there data on the fifo?
if ( FifoCtx->entry_cnt > 0 )
{
// Get data from the fifo context given to us
*charbuf = FifoCtx->fifo[ FifoCtx->get_idx++ ];
// Process the get index to account for queue wrapping
if( FifoCtx->get_idx >= SIZE_OF_UART_FIFO )
{
FifoCtx->get_idx = 0;
}
// Indicate an entry was removed from the queue
FifoCtx->entry_cnt--;
// Response successfully dequeued
intUnlock(oldlevel);
return TRUE;
}
else
{
// No response to remove from the queue.
intUnlock(oldlevel);
return FALSE;
}
}
void UrgencyTask (void)
{
FAST int key;
Urgency_JOB_INFO * pInfo = &UrgencyJobInfo;
FOREVER
{
/* wait for somebody to wake us up */
semTake (&pInfo->sem, WAIT_FOREVER);
key = intLock ();
while (TRUE)
{
TODO_NODE * pHead;
TODO_NODE * pNode;
/* Pull all the active nodes off of the queue */
if ( (pHead = pInfo->pHead) == NULL)
break;
pInfo->pHead = NULL;
pInfo->pTail = NULL;
intUnlock (key);
pNode = pHead;
while (TRUE)
{
pNode->routine (pNode->param1, pNode->param2,
pNode->param3, pNode->param4,
pNode->param5);
if (pNode->pNext == NULL)
break;
pNode = pNode->pNext;
}
/* Place all processed nodes on the free queue */
key = intLock ();
pNode->pNext = pInfo->pFree;
pInfo->pFree = pHead;
}
intUnlock (key);
}
}
STATUS semBTake(SEM_ID semId, int timeout)
{
int level;
int status;
/* TODO ISR no be allowed */
again:
level = intLock();
if(!IS_CLASS(semId, semClassId))
{
intUnlock(level);
return (ERROR);
}
if(NULL == semId->semOwner)
{
semId->semOwner = (RAIN_TCB*)taskIdCurrent;
intUnlock(level);
return (OK);
}
/* semId have been take by other task */
kernelState = TRUE;
intUnlock(level);
if(OK != kernelPendQPut(&semId->qHead, timeout))
{
kernelExit();
return (ERROR);
}
/* test for interrupt in kernelState=TRUE of semGive */
/*{
int j = 1000000;
while(j >= 0)
{
j--;
}
}*/
if(RESTART == (status = kernelExit()))
{
goto again;
}
return (status);
}
STATUS wdStart
(
WDOG_ID wdId, /* watchdog ID */
int delay, /* delay count, in ticks */
FUNCPTR pRoutine, /* routine to call on time-out */
int parameter /* parameter with which to call routine */
)
{
int level = intLock (); /* LOCK INTERRUPTS */
if (OBJ_VERIFY (wdId, wdClassId) != OK)
{
intUnlock (level); /* UNLOCK INTERRUPTS */
return (ERROR);
}
#ifdef WV_INSTRUMENTATION
/* windview - level 1 event logging */
EVT_OBJ_2 (OBJ, wdId, wdClassId, EVENT_WDSTART, wdId, delay);
#endif
if (kernelState) /* already in kernel? */
{
wdId->deferStartCnt ++; /* bump the start count */
wdId->wdParameter = parameter; /* update w/ new parameter */
wdId->wdRoutine = pRoutine; /* update w/ new routine */
intUnlock (level); /* UNLOCK INTERRUPTS */
workQAdd2 (windWdStart, (int)wdId, delay); /* defer the wdStart */
}
else
{
wdId->deferStartCnt = 1; /* initialize start count */
wdId->wdParameter = parameter; /* update w/ new parameter */
wdId->wdRoutine = pRoutine; /* update w/ new routine */
kernelState = TRUE; /* KERNEL ENTER */
intUnlock (level); /* UNLOCK INTERRUPTS */
if (windWdStart (wdId, delay) != OK) /* start the watchdog */
{
windExit (); /* KERNEL EXIT */
return (ERROR);
}
windExit (); /* KERNEL EXIT */
}
return (OK);
}
WDOG_ID wdCreate (void)
{
WDOG_ID wdId;
#ifdef WV_INSTRUMENTATION
int level;
#endif
if ((!wdLibInstalled) && (wdLibInit () != OK))
return (NULL); /* package init problem */
wdId = (WDOG_ID) objAlloc (wdClassId);
/* initialize allocated watchdog */
if ((wdId != NULL) && (wdInit (wdId) != OK))
{
objFree (wdClassId, (char *) wdId);
return (NULL);
}
#ifdef WV_INSTRUMENTATION
/* windview - level 1 event logging */
level = intLock ();
EVT_OBJ_1 (OBJ, wdId, wdClassId, EVENT_WDCREATE, wdId);
intUnlock (level);
#endif
return (wdId);
}
void sysHwInit0(void)
{
intLock();
#if PLL_EN == 0
/* Not use PLL 不使用PLL */
SysCtlClockSet(CCLK_DIV
| SYSCTL_USE_OSC
| SYSCTL_OSC_MAIN
| EXT_CLK);
#else
/* Use PLL 使用PLL */
SysCtlClockSet(CCLK_DIV
| SYSCTL_USE_PLL
| SYSCTL_OSC_MAIN
| EXT_CLK);
#endif
intLibInit();
//系统IO初始化
bsp_gpio_init();
//系统串口初始化
sysSerialHwInit();
intUnlock();
}
static void i8250InitChannel
(
I8250_CHAN *pChan
)
{
int oldLevel;
oldLevel = intLock ();
/* 8 data bits, 1 stop bit, no parity */
(*pChan->outByte) (pChan->lcr, 0x03);
/* enable the receiver and transmitter */
(*pChan->outByte) (pChan->mdc, 0x0b);
(*pChan->inByte) (pChan->data); /* clear the port */
/* enables interrupts */
(*pChan->outByte) (pChan->ier,0x1);
intUnlock (oldLevel);
}
void ADSL_DisableIRQ2(void)
{
register UINT32 temp;
if (pF2_IRQ2_ISR == 0)
return;
temp = intLock();
#ifdef LEVEL_MODE_ADSL
DisableInterruptCount++;
if (pF2_IRQ2_ISR)
SetGPIOIntEnable(GPIOINT_F2_IRQ2, 0);
/* Indicate start of critical section for debug */
SetGPIOF2PCS(TRUE);
intUnlock(temp);
#else /* LEVEL_MODE_ADSL */
oldValue[DisableInterruptCount]=temp;
if (DisableInterruptCount == 0)
/* Indicate start of critical section for debug */
SetGPIOF2PCS(TRUE);
DisableInterruptCount++;
#endif /* LEVEL_MODE_ADSL */
}
void wdbSuspendSystemHere
(
void (*callback)(),
int arg
)
{
u_int lockKey;
WDB_IU_REGS regSet;
lockKey = intLock();
#if CPU==SIMNT
sysClkDisable();
#endif
if (WDB_CTX_SAVE (®Set) == 0)
{
_sigCtxRtnValSet (®Set, 1);
wdbSuspendSystem (®Set, callback, arg);
}
#if CPU==SIMNT
sysClkEnable();
#endif
intUnlock (lockKey);
}
void sysClkInt
(
int timerNum
)
{
int myLock;
myLock = intLock();
/* ack the interrupt */
MIPS3_SD(sysClkBase + R_SCD_TIMER_CFG,
M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS);
#if defined(USE_SIBYTE_INTR)
SOC_INTR_INVOKE();
#endif
/* call system clock service routine */
if (sysClkRoutine != NULL)
(* sysClkRoutine) (sysClkArg);
intUnlock(myLock);
}
STATUS semDestroy(SEM_ID semId, BOOL dealloc)
{
int level;
level = intLock();
if(!IS_CLASS(semId, semClassId))
{
return (ERROR);
}
objCoreTerminate(&semId->objCore);
kernelState = TRUE;
intUnlock(level);
kernelSemDelete(semId);
TASK_SAFE();
kernelExit();
if(dealloc)
{
objFree(semClassId, (char*)semId);
}
TASK_UNSAFE();
return (OK);
}
void
bspHwInit(void)
{
intLock();
intUnlock();
}
void ns16550DevInit
(
NS16550_CHAN * pChan /* pointer to channel */
)
{
int oldlevel = intLock ();
/* initialize the driver function pointers in the SIO_CHAN's */
pChan->pDrvFuncs = &ns16550SioDrvFuncs;
/* set the non BSP-specific constants */
pChan->getTxChar = ns16550DummyCallback;
pChan->putRcvChar = ns16550DummyCallback;
pChan->channelMode = 0; /* undefined */
pChan->options = (CLOCAL | CREAD | CS8);
pChan->mcr = MCR_OUT2;
/* reset the chip */
ns16550InitChannel (pChan);
intUnlock (oldlevel);
}
STATUS
pciIntDisconnect
(
VOIDFUNCPTR *vector, /* interrupt vector to attach to */
VOIDFUNCPTR routine /* routine to be called */
)
{
int irq = IVEC_TO_INUM ((int)vector) - INT_NUM_IRQ0;
PCI_INT_RTN *pRtn;
int oldLevel;
for (pRtn = (PCI_INT_RTN *)DLL_FIRST (&pciIntList[irq]); pRtn != NULL;
pRtn = (PCI_INT_RTN *)DLL_NEXT (&pRtn->node)) {
if (pRtn->routine == routine) {
oldLevel = intLock (); /* LOCK INTERRUPT */
dllRemove (&pciIntList[irq], &pRtn->node);
intUnlock (oldLevel); /* UNLOCK INTERRUPT */
free ((char *)pRtn);
return (OK);
}
}
return (ERROR);
}
void bcm_robo_mii_rx(UINT8 *b, int *l)
{
M_BLK_ID pMblk;
int s;
int n = 10;
*l = 0;
while(*l == 0) {
pMblk = robo_txrx_info.rx_head;
if (pMblk != NULL) {
s = intLock();
robo_txrx_info.rx_head = pMblk->mBlkHdr.mNextPkt;
if (robo_txrx_info.rx_head == NULL) {
robo_txrx_info.rx_tail = NULL;
}
intUnlock(s);
*l = pMblk->mBlkPktHdr.len;
netMblkToBufCopy(pMblk, b, NULL);
netMblkClChainFree(pMblk);
#ifdef ROBO_TXRX_DEBUG
ROBO_TXRX_PRINT("DeQueued a packet %08x len = %d\n",
(int)pMblk, *l, 3, 4, 5, 6);
#endif
} else {
/* Wait for a packet */
/* semTake(robo_txrx_info.rx_sem); */
taskDelay(1);
if (!(n--)) break;
}
}
}
/*-------------------------
set DMAcntl, SampleRate,
<8bits unsigned mono>
------------------------*/
int prog_codec(void)
{
UINT32 format;
int lockkey;
lockkey = intLock();
/* Program record/playback sampling rate -- 11025 */
/* DAC */
format = DMRn_DMA | DMRn_AUTO |DMRn_TR_READ|DMRn_USIGN|DMRn_SIZE8|DMRn_MONO;
writel(format, CS4281_pBA0+BA0_DMR0);
writel(0x04, CS4281_pBA0+BA0_DACSR);
/* ADC */
format = DMRn_DMA | DMRn_AUTO |DMRn_TR_WRITE/*|DMRn_USIGN*/|DMRn_SIZE8|DMRn_MONO;
writel(format, CS4281_pBA0+BA0_DMR1);
writel(0x04, CS4281_pBA0+BA0_ADCSR);
intUnlock(lockkey);
return 0;
}
/*******************************************************************************
*
* spUartDevInit - initialise an SPUART channel
*
* This routine initialises some CNXT_SIO function pointers and then resets
* the chip in a quiescent state. Before this routine is called, the BSP
* must already have initialised all the device addresses, etc. in the
* CNXT_UART structure.
*
* RETURNS: N/A
*******************************************************************************/
eUARTType spUartDevInit ( CNXT_UART *pUARTChan )
{
static eUARTType spUartInitChannel(CNXT_UART *pUARTChan) ;
eUARTType eStatus;
UINT32 oldlevel = intLock();
HWSTATE.g_pUARTChan = pUARTChan;
/* reset the chip */
eStatus = spUartInitChannel(pUARTChan);
pUARTChan->xmtr_uart_fifo.get_idx = 0;
pUARTChan->xmtr_uart_fifo.put_idx = 0;
pUARTChan->xmtr_uart_fifo.entry_cnt = 0;
pUARTChan->rcvr_uart_fifo.get_idx = 0;
pUARTChan->rcvr_uart_fifo.put_idx = 0;
pUARTChan->rcvr_uart_fifo.entry_cnt = 0;
intUnlock(oldlevel);
return(eStatus);
}
LOCAL STATUS ns16550Open
(
NS16550_CHAN * pChan /* pointer to channel */
)
{
FAST int oldlevel; /* current interrupt level mask */
char mask;
mask = ns16550RegRd(REGPTR(MCR, pChan)) & (MCR_RTS | MCR_DTR);
if (mask != (MCR_RTS | MCR_DTR))
{
/* RTS and DTR not set yet */
oldlevel = intLock ();
/* set RTS and DTR TRUE */
pChan->mcr |= (MCR_DTR | MCR_RTS);
ns16550RegWr(REGPTR(MCR, pChan) , pChan->mcr);
/* clear Tx and receive and enable FIFO */
ns16550RegWr(REGPTR(FCR, pChan) , (RxCLEAR | TxCLEAR | FIFO_ENABLE));
intUnlock (oldlevel);
}
return (OK);
}
LOCAL STATUS ns16550BaudSet
(
NS16550_CHAN * pChan, /* pointer to channel */
UINT baud /* requested baud rate */
)
{
int oldlevel;
int divisor = ((pChan->xtal + (8 * baud)) / (16 * baud));
/* disable interrupts during chip access */
oldlevel = intLock ();
/* Enable access to the divisor latches by setting DLAB in LCR. */
ns16550RegWr(REGPTR(LCR, pChan) , LCR_DLAB | pChan->lcr);
/* Set divisor latches. */
ns16550RegWr(REGPTR(DLL,pChan) , divisor);
ns16550RegWr(REGPTR(DLM,pChan) , (divisor >> 8));
/* Restore line control register */
ns16550RegWr(REGPTR(LCR, pChan) , pChan->lcr);
pChan->baudRate = baud;
intUnlock (oldlevel);
return (OK);
}
/*****************************************************************************
Prototype : BSP_MailBox_SpMsgRead
Description : 专有邮箱（Special Mailbox）的读接口
(由调用者保证调用接口时DSP处于非睡眠状态)
Input :
ulAddr : 专有邮箱的偏移地址（从消息头开始的地址）
ulSize : 初始值的大小(以字节为单位)
pData : 数据信息(不包含消息头信息)
Return Value :
BSP_OK: 读取成功
ERR_MAILBOX_READ_NULL: 无数据
ERR_MAILBOX_NOT_INIT: 邮箱未初始化
ERR_MAILBOX_PARAM_INCORRECT: 参数错误
*****************************************************************************/
u32 BSP_MailBox_SpMsgRead(u32 ulAddr,
u32 ulSize,
void* pData)
{
s32 key = 0;
u32 ret = 0;
if(!(g_stMbxCtrl.bMbxInit))
{
g_stMbxMntn.stAbnormal.ulNInitSlic = BSP_GetSliceValue();
return ERR_MAILBOX_NOT_INIT;
}
if((BSP_NULL == pData) || (0 == ulSize))
{
return ERR_MAILBOX_PARAM_INCORRECT;
}
key = intLock();
ret = MailBox_SpMsgRead(ulAddr, ulSize, pData);
intUnlock(key);
return ret;
}
/*****************************************************************************
Prototype : MailBox_SpMsgWrite
Description : 专有邮箱写接口封装
Input :
ulAddr : 专有邮箱的地址
ulSize : 缓冲区大小(以字节为单位)
pData : 缓冲区指针(不包含消息头信息)
Return Value :
0: 表示操作成功
其他: 表示操作失败
*****************************************************************************/
u32 MailBox_SpMsgWrite(u32 ulAddr,
u32 ulSize,
void* pData)
{
u32 ret = BSP_OK;
s32 key;
key = intLock();
if(*((u32*)ulAddr))
{
/* 设置为无数据 */
*((u32*)ulAddr) = 0;
ret = ERR_MAILBOX_COVER;
}
memcpy(((u8*)ulAddr + 4), pData, ulSize);
/* 设置为DSP可以读 */
*((u32*)ulAddr) = 1;
intUnlock(key);
return ret;
}
int readSerialMod_9(int *intBuffer)
{
int lvl;
STATUS ret;
unsigned char * buffer;
unsigned char bufAux[9];
int i, size = 0;
buffer = (unsigned char *)(*intBuffer);
ret = scMemValidate((void *)buffer, 9, SC_PROT_WRITE);
if (ret == OK) {
while (size < 9) {
lvl = intLock (); /* lock interrupts */
/* invoke the DLL refillBuffer routine */
i = pDllReadSerial(bufAux,(9-size));
intUnlock (lvl); /* unlock interrupts */
if (i > 0) {
memcpy (&(buffer[size]),bufAux,i);
size = size +i;
}
}
return(size);
} else {
printf ("reproducir: error en buffer\n");
return(-1);
}
}
STATUS
pciIntConnect (VOIDFUNCPTR *vector, VOIDFUNCPTR routine, int parameter)
{
static int alreadyConnected=FALSE;
int irq = IVEC_TO_INUM ((int)vector) - sysVectorIRQ0;
PCI_INT_RTN *pRtn;
int oldLevel;
pRtn = (PCI_INT_RTN *)malloc (sizeof (PCI_INT_RTN));
if (pRtn == NULL) {
return (ERROR);
}
pRtn->routine = routine;
pRtn->parameter = parameter;
oldLevel = intLock (); /* LOCK INTERRUPT */
dllAdd (&pciIntList[irq], &pRtn->node);
intUnlock (oldLevel); /* UNLOCK INTERRUPT */
if (!alreadyConnected) {
if (intConnect(vector, (VOIDFUNCPTR) pciInt, irq) == ERROR) {
return -1;
}
alreadyConnected=TRUE;
}
return (OK);
}
void et_drv_mii_rx(int unit, UINT8 *b, int *l)
{
M_BLK_ID pMblk;
int s;
int n = 10;
*l = 0;
while(*l == 0) {
pMblk = et_drv_txrx_info[unit].rx_head;
if (pMblk != NULL) {
s = intLock();
et_drv_txrx_info[unit].rx_head = pMblk->mBlkHdr.mNextPkt;
if (et_drv_txrx_info[unit].rx_head == NULL) {
et_drv_txrx_info[unit].rx_tail = NULL;
}
intUnlock(s);
*l = pMblk->mBlkPktHdr.len;
netMblkToBufCopy(pMblk, (char *)b, NULL);
netMblkClChainFree(pMblk);
ET_DRV_TXRX_PRINT("DeQueued a packet %08x len = %d\n",
(int)pMblk, *l, 3, 4, 5, 6);
} else {
/* Wait for a packet */
/* semTake(et_drv_txrx_info.rx_sem); */
taskDelay(1);
if (!(n--)) break;
}
}
}
static void wdbExcHook
(
WDB_CTX context,
u_int vec,
char * pESF,
WDB_IU_REGS * pRegs
)
{
wdbExcInfoNode_t * pExcInfoNode;
int lockKey;
/* get a node off the queue */
lockKey = intLock();
pExcInfoNode = (wdbExcInfoNode_t *)dll_tail (&wdbExcEvtList);
/* if event list if full and this is a task exception, just return */
if ((pExcInfoNode->valid) && (context.contextType == WDB_CTX_TASK))
{
intUnlock (lockKey);
return;
}
pExcInfoNode->valid = TRUE;
pExcInfoNode->context = context;
pExcInfoNode->excVector = vec;
pExcInfoNode->pESF = pESF;
dll_remove (&pExcInfoNode->node);
dll_insert (&pExcInfoNode->node, &wdbExcEvtList);
intUnlock (lockKey);
/* exception in task context */
if (wdbIsNowTasking())
{
wdbEventPost (&wdbExcEvtNode);
return;
}
/* exception in system context - suspend system before posting event */
wdbSuspendSystem (pRegs, wdbEventPost, (int)&wdbExcEvtNode);
/* NOTREACHED */
}
STATUS wdDestroy
(
WDOG_ID wdId, /* ID of watchdog to terminate */
BOOL dealloc /* dealloc associated memory */
)
{
int level;
if (INT_RESTRICT () != OK) /* restrict isr use */
return (ERROR);
level = intLock (); /* LOCK INTERRUPTS */
if (OBJ_VERIFY (wdId, wdClassId) != OK) /* validate watchdog ID */
{
intUnlock (level); /* UNLOCK INTERRUPTS */
return (ERROR);
}
#ifdef WV_INSTRUMENTATION
/* windview - level 1 event logging */
EVT_OBJ_1 (OBJ, wdId, wdClassId, EVENT_WDDELETE, wdId);
#endif
objCoreTerminate (&wdId->objCore); /* invalidate watchdog */
kernelState = TRUE; /* KERNEL ENTER */
intUnlock (level); /* UNLOCK INTERRUPTS */
windWdCancel (wdId); /* cancel watchdog */
wdId->status = WDOG_DEAD; /* dead dog */
TASK_SAFE (); /* TASK SAFE */
windExit (); /* EXIT KERNEL */
if (dealloc)
objFree (wdClassId, (char *) wdId); /* deallocate watchdog */
TASK_UNSAFE (); /* TASK UNSAFE */
return (OK);
}
void ADSL_EnableIRQ1_2(void)
{
register UINT32 temp;
if (pF2_IRQ1_ISR == 0 && pF2_IRQ2_ISR == 0)
return;
temp= intLock();
#ifdef LEVEL_MODE_ADSL
if (DisableInterruptCount)
DisableInterruptCount--;
if (DisableInterruptCount == 0)
{
/* Indicate out of critical section for debug */
SetGPIOF2PCS(FALSE);
if (pF2_IRQ1_ISR)
SetGPIOIntEnable(GPIOINT_F2_IRQ1, 1);
if (pF2_IRQ2_ISR)
SetGPIOIntEnable(GPIOINT_F2_IRQ2, 1);
}
intUnlock(temp);
#else /* LEVEL_MODE_ADSL */
if (DisableInterruptCount == 0)
{
intUnlock(temp);
return;
}
DisableInterruptCount--;
if (DisableInterruptCount == 0)
/* Indicate out of critical section for debug */
SetGPIOF2PCS(FALSE);
/* Allow for nesting, push values onto a stack */
intUnlock(temp);
intUnlock(oldValue[DisableInterruptCount]);
#endif /* LEVEL_MODE_ADSL */
}