int
tcp_usrreq(struct socket * so,
struct mbuf * m,
struct mbuf * nam)
{
struct inpcb * inp;
struct tcpcb * tp;
int error = 0;
int req;
#ifdef DO_TCPTRACE
int ostate;
#endif
req = so->so_req; /* get request from socket struct */
inp = sotoinpcb(so);
/*
* When a TCP is attached to a socket, then there will be
* a (struct inpcb) pointed at by the socket, and this
* structure will point at a subsidary (struct tcpcb).
*/
if (inp == 0 && req != PRU_ATTACH)
{
return (EINVAL);
}
if (inp)
tp = intotcpcb(inp);
else /* inp and tp not set, make sure this is OK: */
{
if (req == PRU_ATTACH)
tp = NULL; /* stifle compiler warnings about using unassigned tp*/
else
{
dtrap(); /* programming error? */
return EINVAL;
}
}
switch (req)
{
/*
* TCP attaches to socket via PRU_ATTACH, reserving space,
* and an internet control block.
*/
case PRU_ATTACH:
if (inp)
{
error = EISCONN;
break;
}
error = tcp_attach(so);
if (error)
break;
if ((so->so_options & SO_LINGER) && so->so_linger == 0)
so->so_linger = TCP_LINGERTIME;
#ifdef DO_TCPTRACE
SETTP(tp, sototcpcb(so));
#endif
break;
/*
* PRU_DETACH detaches the TCP protocol from the socket.
* If the protocol state is non-embryonic, then can't
* do this directly: have to initiate a PRU_DISCONNECT,
* which may finish later; embryonic TCB's can just
* be discarded here.
*/
case PRU_DETACH:
if (tp->t_state > TCPS_LISTEN)
SETTP(tp, tcp_disconnect(tp));
else
SETTP(tp, tcp_close(tp));
break;
/*
* Give the socket an address.
*/
case PRU_BIND:
/* bind is quite different for IPv4 and v6, so we use two
* seperate pcbbind routines. so_domain was checked for
* validity way up in t_bind()
*/
#ifdef IP_V4
if(inp->inp_socket->so_domain == AF_INET)
{
error = in_pcbbind(inp, nam);
break;
}
#endif /* IP_V4 */
#ifdef IP_V6
if(inp->inp_socket->so_domain == AF_INET6)
{
error = ip6_pcbbind(inp, nam);
break;
}
#endif /* IP_V6 */
dtrap(); /* not v4 or v6? */
error = EINVAL;
break;
/*
* Prepare to accept connections.
*/
case PRU_LISTEN:
if (inp->inp_lport == 0)
error = in_pcbbind(inp, (struct mbuf *)0);
if (error == 0)
tp->t_state = TCPS_LISTEN;
break;
/*
* Initiate connection to peer.
* Create a template for use in transmissions on this connection.
* Enter SYN_SENT state, and mark socket as connecting.
* Start keep-alive timer, and seed output sequence space.
* Send initial segment on connection.
*/
case PRU_CONNECT:
if (inp->inp_lport == 0)
{
#ifdef IP_V4
#ifndef IP_V6 /* v4 only */
error = in_pcbbind(inp, (struct mbuf *)0);
#else /* dual mode */
if(so->so_domain == AF_INET)
error = in_pcbbind(inp, (struct mbuf *)0);
else
error = ip6_pcbbind(inp, (struct mbuf *)0);
#endif /* end dual mode code */
#else /* no v4, v6 only */
error = ip6_pcbbind(inp, (struct mbuf *)0);
#endif /* end v6 only */
if (error)
break;
}
#ifdef IP_V4
#ifndef IP_V6 /* v4 only */
error = in_pcbconnect(inp, nam);
#else /* dual mode */
if(so->so_domain == AF_INET)
error = in_pcbconnect(inp, nam);
else
error = ip6_pcbconnect(inp, nam);
#endif /* end dual mode code */
#else /* no v4, v6 only */
error = ip6_pcbconnect(inp, nam);
#endif /* end v6 only */
if (error)
break;
tp->t_template = tcp_template(tp);
if (tp->t_template == 0)
{
#ifdef IP_V4
#ifndef IP_V6 /* v4 only */
in_pcbdisconnect(inp);
#else /* dual mode */
if(so->so_domain == AF_INET)
in_pcbdisconnect(inp);
else
ip6_pcbdisconnect(inp);
#endif /* end dual mode code */
#else /* no v4, v6 only */
ip6_pcbdisconnect(inp);
#endif /* end v6 only */
error = ENOBUFS;
break;
}
soisconnecting(so);
tcpstat.tcps_connattempt++;
tp->t_state = TCPS_SYN_SENT;
tp->t_timer[TCPT_KEEP] = TCPTV_KEEP_INIT;
tp->iss = tcp_iss;
tcp_iss += (tcp_seq)(TCP_ISSINCR/2);
tcp_sendseqinit(tp);
error = tcp_output(tp);
if (!error)
TCP_MIB_INC(tcpActiveOpens); /* keep MIB stats */
break;
/*
* Create a TCP connection between two sockets.
*/
case PRU_CONNECT2:
error = EOPNOTSUPP;
break;
/*
* Initiate disconnect from peer.
* If connection never passed embryonic stage, just drop;
* else if don't need to let data drain, then can just drop anyways,
* else have to begin TCP shutdown process: mark socket disconnecting,
* drain unread data, state switch to reflect user close, and
* send segment (e.g. FIN) to peer. Socket will be really disconnected
* when peer sends FIN and acks ours.
*
* SHOULD IMPLEMENT LATER PRU_CONNECT VIA REALLOC TCPCB.
*/
case PRU_DISCONNECT:
SETTP(tp, tcp_disconnect(tp));
break;
/*
* Accept a connection. Essentially all the work is
* done at higher levels; just return the address
* of the peer, storing through addr.
*/
case PRU_ACCEPT:
{
struct sockaddr_in * sin = mtod(nam, struct sockaddr_in *);
#ifdef IP_V6
struct sockaddr_in6 * sin6 = mtod(nam, struct sockaddr_in6 *);
#endif
#ifdef IP_V6
if (so->so_domain == AF_INET6)
{
nam->m_len = sizeof (struct sockaddr_in6);
sin6->sin6_port = inp->inp_fport;
sin6->sin6_family = AF_INET6;
IP6CPY(&sin6->sin6_addr, &inp->ip6_faddr);
}
#endif
#ifdef IP_V4
if (so->so_domain == AF_INET)
{
nam->m_len = sizeof (struct sockaddr_in);
sin->sin_family = AF_INET;
sin->sin_port = inp->inp_fport;
sin->sin_addr = inp->inp_faddr;
}
#endif
if ( !(so->so_domain == AF_INET) &&
!(so->so_domain == AF_INET6)
)
{
dprintf("*** PRU_ACCEPT bad domain = %d\n", so->so_domain);
dtrap();
}
TCP_MIB_INC(tcpPassiveOpens); /* keep MIB stats */
break;
}
/*
* Mark the connection as being incapable of further output.
*/
case PRU_SHUTDOWN:
socantsendmore(so);
tp = tcp_usrclosed(tp);
if (tp)
error = tcp_output(tp);
break;
/*
* After a receive, possibly send window update to peer.
*/
case PRU_RCVD:
(void) tcp_output(tp);
break;
/*
* Do a send by putting data in output queue and updating urgent
* marker if URG set. Possibly send more data.
*/
case PRU_SEND:
if (so->so_pcb == NULL)
{ /* Return EPIPE error if socket is not connected */
error = EPIPE;
break;
}
sbappend(&so->so_snd, m);
error = tcp_output(tp);
if (error == ENOBUFS)
sbdropend(&so->so_snd,m); /* Remove data from socket buffer */
break;
/*
* Abort the TCP.
*/
case PRU_ABORT:
SETTP(tp, tcp_drop(tp, ECONNABORTED));
break;
case PRU_SENSE:
/* ((struct stat *) m)->st_blksize = so->so_snd.sb_hiwat; */
dtrap(); /* does this ever happen? */
return (0);
case PRU_RCVOOB:
if ((so->so_oobmark == 0 &&
(so->so_state & SS_RCVATMARK) == 0) ||
#ifdef SO_OOBINLINE
so->so_options & SO_OOBINLINE ||
#endif
tp->t_oobflags & TCPOOB_HADDATA)
{
error = EINVAL;
break;
}
if ((tp->t_oobflags & TCPOOB_HAVEDATA) == 0)
{
error = EWOULDBLOCK;
break;
}
m->m_len = 1;
*mtod(m, char *) = tp->t_iobc;
if ((MBUF2LONG(nam) & MSG_PEEK) == 0)
tp->t_oobflags ^= (TCPOOB_HAVEDATA | TCPOOB_HADDATA);
break;
case PRU_SENDOOB:
if (so->so_pcb == NULL)
{ /* Return EPIPE error if socket is not connected */
error = EPIPE;
break;
}
if (sbspace(&so->so_snd) == 0)
{
m_freem(m);
error = ENOBUFS;
break;
}
/*
* According to RFC961 (Assigned Protocols),
* the urgent pointer points to the last octet
* of urgent data. We continue, however,
* to consider it to indicate the first octet
* of data past the urgent section.
* Otherwise, snd_up should be one lower.
*/
sbappend(&so->so_snd, m);
tp->snd_up = tp->snd_una + so->so_snd.sb_cc;
tp->t_force = 1;
error = tcp_output(tp);
if (error == ENOBUFS)
sbdropend(&so->so_snd,m); /* Remove data from socket buffer */
tp->t_force = 0;
break;
case PRU_SOCKADDR:
/* sockaddr and peeraddr have to switch based on IP type */
#ifdef IP_V4
#ifndef IP_V6 /* v4 only */
in_setsockaddr(inp, nam);
#else /* dual mode */
if(so->so_domain == AF_INET6)
ip6_setsockaddr(inp, nam);
else
in_setsockaddr(inp, nam);
#endif /* dual mode */
#else /* IP_V6 */
ip6_setsockaddr(inp, nam);
#endif
break;
case PRU_PEERADDR:
#ifdef IP_V4
#ifndef IP_V6 /* v4 only */
in_setpeeraddr(inp, nam);
#else /* dual mode */
if(so->so_domain == AF_INET6)
ip6_setpeeraddr(inp, nam);
else
in_setpeeraddr(inp, nam);
#endif /* dual mode */
#else /* IP_V6 */
ip6_setpeeraddr(inp, nam);
#endif
break;
case PRU_SLOWTIMO:
SETTP(tp, tcp_timers(tp, (int)MBUF2LONG(nam)));
#ifdef DO_TCPTRACE
req |= (long)nam << 8; /* for debug's sake */
#endif
break;
default:
panic("tcp_usrreq");
}
#ifdef DO_TCPTRACE
if (tp && (so->so_options & SO_DEBUG))
tcp_trace("usrreq: state: %d, tcpcb: %x, req: %d",
ostate, tp, req);
#endif
return (error);
}
int
ip6_pcbconnect(struct inpcb *inp, struct mbuf *nam)
{
struct sockaddr_in6 *sin;
int err;
sin = mtod(nam, struct sockaddr_in6 *);
if (sin->sin6_family != AF_INET6)
return (EAFNOSUPPORT);
if (sin->sin6_port == 0)
return (EADDRNOTAVAIL);
/* If the destination address is unspecified or multicast,
* then blow it off.
*/
if ((IP6EQ(&sin->sin6_addr, &in6addr_any)) || /* wildcard? */
(IN6_IS_ADDR_MULTICAST(&sin->sin6_addr)))
{
return (EADDRNOTAVAIL);
}
if (!inp->ifp)
{
#ifdef IP6_ROUTING
if (inp->inp_socket && inp->inp_socket->so_optsPack)
{
#ifdef MULTI_HOMED
if (inp->inp_socket->so_optsPack->ip_scopeid == 0)
{
gio_printf(NULL, "*** ip6_pcbconnect, no IPv6 IF.\n");
return ENP_LOGIC;
}
#endif
inp->ifp = nets[inp->inp_socket->so_optsPack->ip_scopeid - 1];
}
else
{
/* try to find an IPv6 IF */
inp->ifp = ip6_findIF();
if (inp->ifp == NULL)
{
gio_printf(NULL, "*** ip6_pcbconnect, no IPv6 IF.\n");
return ENP_LOGIC;
}
}
#else
/* just use nd0 */
inp->ifp = nets[0];
#endif
}
inp->inp_flags |= INPF_ROUTESET;
/* Make sure this is not a duplicate of an existing connection */
if (ip6_pcblookup(inp->inp_head,
&sin->sin6_addr, sin->sin6_port,
&inp->ip6_laddr, inp->inp_lport,
0))
{
return (EADDRINUSE);
}
if (IP6EQ(&inp->ip6_laddr, &in6addr_any))
{
if ((err = ip6_pcbbind(inp, (struct mbuf *)NULL)) != 0)
{
dprintf("*** ip6_pcbconnect - ip6_pcbbind err = %d", err);
panic("***");
}
}
IP6CPY(&inp->ip6_faddr, &sin->sin6_addr);
inp->inp_fport = sin->sin6_port;
return (0);
}