int
udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
struct mbuf *control, struct thread *td)
{
u_int32_t ulen = m->m_pkthdr.len;
u_int32_t plen = sizeof(struct udphdr) + ulen;
struct ip6_hdr *ip6;
struct udphdr *udp6;
struct in6_addr *laddr, *faddr;
u_short fport;
int error = 0;
struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
int priv;
int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
int flags;
struct sockaddr_in6 tmp;
priv = !priv_check(td, PRIV_ROOT); /* 1 if privileged, 0 if not */
if (control) {
if ((error = ip6_setpktoptions(control, &opt,
in6p->in6p_outputopts,
IPPROTO_UDP, priv)) != 0)
goto release;
in6p->in6p_outputopts = &opt;
}
if (addr6) {
/*
* IPv4 version of udp_output calls in_pcbconnect in this case,
* which needs splnet and affects performance.
* Since we saw no essential reason for calling in_pcbconnect,
* we get rid of such kind of logic, and call in6_selectsrc
* and in6_pcbsetport in order to fill in the local address
* and the local port.
*/
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
if (sin6->sin6_port == 0) {
error = EADDRNOTAVAIL;
goto release;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
/* how about ::ffff:0.0.0.0 case? */
error = EISCONN;
goto release;
}
if (!prison_remote_ip(td, addr6)) {
error = EAFNOSUPPORT; /* IPv4 only jail */
goto release;
}
/* protect *sin6 from overwrites */
tmp = *sin6;
sin6 = &tmp;
faddr = &sin6->sin6_addr;
fport = sin6->sin6_port; /* allow 0 port */
if (IN6_IS_ADDR_V4MAPPED(faddr)) {
if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
/*
* I believe we should explicitly discard the
* packet when mapped addresses are disabled,
* rather than send the packet as an IPv6 one.
* If we chose the latter approach, the packet
* might be sent out on the wire based on the
* default route, the situation which we'd
* probably want to avoid.
* (20010421 [email protected])
*/
error = EINVAL;
goto release;
} else
af = AF_INET;
}
/* KAME hack: embed scopeid */
if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
error = EINVAL;
goto release;
}
if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
in6p->in6p_moptions,
&in6p->in6p_route,
&in6p->in6p_laddr, &error, NULL);
} else
laddr = &in6p->in6p_laddr; /* XXX */
if (laddr == NULL) {
if (error == 0)
error = EADDRNOTAVAIL;
goto release;
}
if (in6p->in6p_lport == 0 &&
(error = in6_pcbsetport(laddr, in6p, td)) != 0)
goto release;
} else {
if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
error = ENOTCONN;
goto release;
}
if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
/*
* XXX: this case would happen when the
* application sets the V6ONLY flag after
* connecting the foreign address.
* Such applications should be fixed,
* so we bark here.
*/
log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
"option was set for a connected socket\n");
error = EINVAL;
goto release;
} else
af = AF_INET;
}
laddr = &in6p->in6p_laddr;
faddr = &in6p->in6p_faddr;
fport = in6p->in6p_fport;
}
if (af == AF_INET)
hlen = sizeof(struct ip);
/*
* Calculate data length and get a mbuf
* for UDP and IP6 headers.
*/
M_PREPEND(m, hlen + sizeof(struct udphdr), MB_DONTWAIT);
if (m == NULL) {
error = ENOBUFS;
goto release;
}
/*
* Stuff checksum and output datagram.
*/
udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
udp6->uh_dport = fport;
if (plen <= 0xffff)
udp6->uh_ulen = htons((u_short)plen);
else
udp6->uh_ulen = 0;
udp6->uh_sum = 0;
switch (af) {
case AF_INET6:
ip6 = mtod(m, struct ip6_hdr *);
ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
#if 0 /* ip6_plen will be filled in ip6_output. */
ip6->ip6_plen = htons((u_short)plen);
#endif
ip6->ip6_nxt = IPPROTO_UDP;
ip6->ip6_hlim = in6_selecthlim(in6p,
in6p->in6p_route.ro_rt ?
in6p->in6p_route.ro_rt->rt_ifp : NULL);
ip6->ip6_src = *laddr;
ip6->ip6_dst = *faddr;
if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
sizeof(struct ip6_hdr), plen)) == 0) {
udp6->uh_sum = 0xffff;
}
flags = 0;
udp6stat.udp6s_opackets++;
error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route,
flags, in6p->in6p_moptions, NULL, in6p);
break;
case AF_INET:
error = EAFNOSUPPORT;
goto release;
}
goto releaseopt;
release:
m_freem(m);
releaseopt:
if (control) {
ip6_clearpktopts(in6p->in6p_outputopts, -1);
in6p->in6p_outputopts = stickyopt;
m_freem(control);
}
return (error);
}
int
udp6_output(struct in6pcb *in6p, struct mbuf *m, struct sockaddr *addr6,
struct mbuf *control, struct thread *td)
{
u_int32_t ulen = m->m_pkthdr.len;
u_int32_t plen = sizeof(struct udphdr) + ulen;
struct ip6_hdr *ip6;
struct udphdr *udp6;
struct in6_addr *laddr, *faddr;
u_short fport;
int error = 0;
struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
int priv;
int hlen = sizeof(struct ip6_hdr);
struct sockaddr_in6 tmp;
priv = !priv_check(td, PRIV_ROOT); /* 1 if privileged, 0 if not */
if (control) {
if ((error = ip6_setpktoptions(control, &opt,
in6p->in6p_outputopts,
IPPROTO_UDP, priv)) != 0)
goto release;
in6p->in6p_outputopts = &opt;
}
if (addr6) {
/*
* IPv4 version of udp_output calls in_pcbconnect in this case,
* which needs splnet and affects performance.
* Since we saw no essential reason for calling in_pcbconnect,
* we get rid of such kind of logic, and call in6_selectsrc
* and in6_pcbsetlport in order to fill in the local address
* and the local port.
*/
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
/* Caller should have rejected the v4-mapped address */
KASSERT(!IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr),
("v4-mapped address"));
if (sin6->sin6_port == 0) {
error = EADDRNOTAVAIL;
goto release;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
/* how about ::ffff:0.0.0.0 case? */
error = EISCONN;
goto release;
}
if (!prison_remote_ip(td, addr6)) {
error = EAFNOSUPPORT; /* IPv4 only jail */
goto release;
}
/* protect *sin6 from overwrites */
tmp = *sin6;
sin6 = &tmp;
faddr = &sin6->sin6_addr;
fport = sin6->sin6_port; /* allow 0 port */
/* KAME hack: embed scopeid */
if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
error = EINVAL;
goto release;
}
laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
in6p->in6p_moptions,
&in6p->in6p_route,
&in6p->in6p_laddr, &error, NULL);
if (laddr == NULL) {
if (error == 0)
error = EADDRNOTAVAIL;
goto release;
}
if (in6p->in6p_lport == 0 &&
(error = in6_pcbsetlport(laddr, in6p, td)) != 0)
goto release;
} else {
if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
error = ENOTCONN;
goto release;
}
/* Connection to v4-mapped address should have been rejected */
KASSERT(!IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr),
("bound to v4-mapped address"));
laddr = &in6p->in6p_laddr;
faddr = &in6p->in6p_faddr;
fport = in6p->in6p_fport;
}
/*
* Calculate data length and get a mbuf
* for UDP and IP6 headers.
*/
M_PREPEND(m, hlen + sizeof(struct udphdr), M_NOWAIT);
if (m == NULL) {
error = ENOBUFS;
goto release;
}
/*
* Stuff checksum and output datagram.
*/
udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
udp6->uh_dport = fport;
if (plen <= 0xffff)
udp6->uh_ulen = htons((u_short)plen);
else
udp6->uh_ulen = 0;
udp6->uh_sum = 0;
ip6 = mtod(m, struct ip6_hdr *);
ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
#if 0 /* ip6_plen will be filled in ip6_output. */
ip6->ip6_plen = htons((u_short)plen);
#endif
ip6->ip6_nxt = IPPROTO_UDP;
ip6->ip6_hlim = in6_selecthlim(in6p,
in6p->in6p_route.ro_rt ?
in6p->in6p_route.ro_rt->rt_ifp : NULL);
ip6->ip6_src = *laddr;
ip6->ip6_dst = *faddr;
if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
sizeof(struct ip6_hdr), plen)) == 0) {
udp6->uh_sum = 0xffff;
}
udp6stat.udp6s_opackets++;
error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route, 0,
in6p->in6p_moptions, NULL, in6p);
goto releaseopt;
release:
m_freem(m);
releaseopt:
if (control) {
ip6_clearpktopts(in6p->in6p_outputopts, -1);
in6p->in6p_outputopts = stickyopt;
m_freem(control);
}
return (error);
}
