// the default child constructor...
CPushPinDesktop::CPushPinDesktop(HRESULT *phr, CPushSourceDesktop *pFilter)
: CSourceStream(NAME("Push Source CPushPinDesktop child/pin"), phr, pFilter, L"Capture"),
m_bReReadRegistry(0),
m_bDeDupe(0),
m_iFrameNumber(0),
pOldData(NULL),
m_bConvertToI420(false),
m_pParent(pFilter),
m_bFormatAlreadySet(false),
hRawBitmap(NULL),
m_bUseCaptureBlt(false),
previousFrameEndTime(0)
{
// Get the device context of the main display, just to get some metrics for it...
globalStart = GetTickCount();
m_iHwndToTrack = (HWND) read_config_setting(TEXT("hwnd_to_track"), NULL, false);
if(m_iHwndToTrack) {
LocalOutput("using specified hwnd no decoration: %d", m_iHwndToTrack);
hScrDc = GetDC(m_iHwndToTrack); // using GetDC here seemingly allows you to capture "just a window" without decoration
m_bHwndTrackDecoration = false;
} else {
m_iHwndToTrack = (HWND) read_config_setting(TEXT("hwnd_to_track_with_window_decoration"), NULL, false);
if(m_iHwndToTrack) {
LocalOutput("using specified hwnd with decoration: %d", m_iHwndToTrack);
hScrDc = GetWindowDC(m_iHwndToTrack);
m_bHwndTrackDecoration = true;
} else {
int useForeGroundWindow = read_config_setting(TEXT("capture_foreground_window_if_1"), 0, true);
if(useForeGroundWindow) {
LocalOutput("using foreground window %d", GetForegroundWindow());
hScrDc = GetDC(GetForegroundWindow());
} else {
// the default, just capture desktop
// hScrDc = CreateDC(TEXT("DISPLAY"), NULL, NULL, NULL); // possibly better than GetDC(0), supposed to be multi monitor?
// LocalOutput("using the dangerous CreateDC DISPLAY\n");
// danger, CreateDC DC is only good as long as this particular thread is still alive...hmm...is it better for directdraw
hScrDc = GetDC(NULL);
}
}
}
//m_iScreenBitDepth = GetTrueScreenDepth(hScrDc);
ASSERT_RAISE(hScrDc != 0); // 0 implies failure... [if using hwnd, can mean the window is gone!]
// Get the dimensions of the main desktop window as the default
m_rScreen.left = m_rScreen.top = 0;
m_rScreen.right = GetDeviceCaps(hScrDc, HORZRES); // NB this *fails* for dual monitor support currently... but we just get the wrong width by default, at least with aero windows 7 both can capture both monitors
m_rScreen.bottom = GetDeviceCaps(hScrDc, VERTRES);
// now read some custom settings...
WarmupCounter();
if(!m_iHwndToTrack) {
reReadCurrentStartXY(0);
} else {
LocalOutput("ignoring startx, starty since hwnd was specified");
}
int config_width = read_config_setting(TEXT("capture_width"), 0, false);
ASSERT_RAISE(config_width >= 0); // negatives not allowed...
int config_height = read_config_setting(TEXT("capture_height"), 0, false);
ASSERT_RAISE(config_height >= 0); // negatives not allowed, if it's set :)
if(config_width > 0) {
int desired = m_rScreen.left + config_width;
//int max_possible = m_rScreen.right; // disabled check until I get dual monitor working. or should I allow off screen captures anyway?
//if(desired < max_possible)
m_rScreen.right = desired;
//else
// m_rScreen.right = max_possible;
} else {
// leave full screen
}
m_iCaptureConfigWidth = m_rScreen.right - m_rScreen.left;
ASSERT_RAISE(m_iCaptureConfigWidth > 0);
if(config_height > 0) {
int desired = m_rScreen.top + config_height;
//int max_possible = m_rScreen.bottom; // disabled, see above.
//if(desired < max_possible)
m_rScreen.bottom = desired;
//else
// m_rScreen.bottom = max_possible;
} else {
// leave full screen
}
m_iCaptureConfigHeight = m_rScreen.bottom - m_rScreen.top;
ASSERT_RAISE(m_iCaptureConfigHeight > 0);
m_iStretchToThisConfigWidth = read_config_setting(TEXT("stretch_to_width"), 0, false);
m_iStretchToThisConfigHeight = read_config_setting(TEXT("stretch_to_height"), 0, false);
m_iStretchMode = read_config_setting(TEXT("stretch_mode_high_quality_if_1"), 0, true); // guess it's either stretch mode 0 or 1
ASSERT_RAISE(m_iStretchToThisConfigWidth >= 0 && m_iStretchToThisConfigHeight >= 0 && m_iStretchMode >= 0); // sanity checks
m_bUseCaptureBlt = read_config_setting(TEXT("capture_transparent_windows_including_mouse_in_non_aero_if_1_causes_annoying_mouse_flicker"), 0, true) == 1;
m_bCaptureMouse = read_config_setting(TEXT("capture_mouse_default_1"), 1, true) == 1;
// default 30 fps...hmm...
int config_max_fps = read_config_setting(TEXT("default_max_fps"), 30, false); // TODO allow floats [?] when ever requested
ASSERT_RAISE(config_max_fps > 0);
// m_rtFrameLength is also re-negotiated later...
m_rtFrameLength = UNITS / config_max_fps;
if(is_config_set_to_1(TEXT("track_new_x_y_coords_each_frame_if_1"))) {
m_bReReadRegistry = 1; // takes 0.416880ms, but I thought it took more when I made it off by default :P
}
if(is_config_set_to_1(TEXT("dedup_if_1"))) {
m_bDeDupe = 1; // takes 10 or 20ms...but useful to me! :)
}
m_millisToSleepBeforePollForChanges = read_config_setting(TEXT("millis_to_sleep_between_poll_for_dedupe_changes"), 10, true);
wchar_t out[10000];
swprintf(out, 10000, L"default/from reg read config as: %dx%d -> %dx%d (%d top %d bottom %d l %d r) %dfps, dedupe? %d, millis between dedupe polling %d, m_bReReadRegistry? %d hwnd:%d \n",
m_iCaptureConfigHeight, m_iCaptureConfigWidth, getCaptureDesiredFinalHeight(), getCaptureDesiredFinalWidth(), m_rScreen.top, m_rScreen.bottom, m_rScreen.left, m_rScreen.right, config_max_fps, m_bDeDupe, m_millisToSleepBeforePollForChanges, m_bReReadRegistry, m_iHwndToTrack);
// warmup the debugging message system
__int64 measureDebugOutputSpeed = StartCounter();
LocalOutput(out);
LocalOutput("writing a large-ish debug itself took: %.02Lf ms", GetCounterSinceStartMillis(measureDebugOutputSpeed));
set_config_string_setting(L"last_init_config_was", out);
}
// the default child constructor...
CPushPinDesktop::CPushPinDesktop(HRESULT *phr, CPushSourceDesktop *pFilter)
: CSourceStream(NAME("Push Source CPushPinDesktop child/pin"), phr, pFilter, L"Capture"),
m_FramesWritten(0),
m_bReReadRegistry(0),
m_bDeDupe(0),
m_iFrameNumber(0),
pOldData(NULL),
m_bConvertToI420(false),
//m_nCurrentBitDepth(32), // negotiated later...
m_pParent(pFilter),
m_bFormatAlreadySet(false),
hRawBitmap(NULL)
{
// Get the device context of the main display, just to get some metrics for it...
globalStart = GetTickCount();
m_iHwndToTrack = (HWND) read_config_setting(TEXT("hwnd_to_track"), NULL);
hScrDc = GetDC(m_iHwndToTrack);
m_iScreenBitDepth = GetTrueScreenDepth(hScrDc);
ASSERT(hScrDc != 0);
GdiSetBatchLimit(1); // disable any GDI...just in case this helps anybody...
// Get the dimensions of the main desktop window as the default
m_rScreen.left = m_rScreen.top = 0;
m_rScreen.right = GetDeviceCaps(hScrDc, HORZRES); // NB this *fails* for dual monitor support currently... but we just get the wrong width by default, at least with aero windows 7 both can capture both monitors
m_rScreen.bottom = GetDeviceCaps(hScrDc, VERTRES);
// now read some custom settings...
WarmupCounter();
reReadCurrentPosition(0);
int config_width = read_config_setting(TEXT("capture_width"), 0);
ASSERT(config_width >= 0); // negatives not allowed...
int config_height = read_config_setting(TEXT("capture_height"), 0);
ASSERT(config_height >= 0); // negatives not allowed, if it's set :)
if(config_width > 0) {
int desired = m_rScreen.left + config_width;
//int max_possible = m_rScreen.right; // disabled check until I get dual monitor working. or should I allow off screen captures anyway?
//if(desired < max_possible)
m_rScreen.right = desired;
//else
// m_rScreen.right = max_possible;
} else {
// leave full screen
}
m_iCaptureConfigWidth = m_rScreen.right - m_rScreen.left;
ASSERT(m_iCaptureConfigWidth > 0);
if(config_height > 0) {
int desired = m_rScreen.top + config_height;
//int max_possible = m_rScreen.bottom; // disabled, see above.
//if(desired < max_possible)
m_rScreen.bottom = desired;
//else
// m_rScreen.bottom = max_possible;
} else {
// leave full screen
}
m_iCaptureConfigHeight = m_rScreen.bottom - m_rScreen.top;
ASSERT(m_iCaptureConfigHeight > 0);
m_iStretchToThisConfigWidth = read_config_setting(TEXT("stretch_to_width"), 0);
m_iStretchToThisConfigHeight = read_config_setting(TEXT("stretch_to_height"), 0);
m_iStretchMode = read_config_setting(TEXT("stretch_mode_high_quality_if_1"), 0);
ASSERT(m_iStretchToThisConfigWidth >= 0 && m_iStretchToThisConfigHeight >= 0 && m_iStretchMode >= 0); // sanity checks
// default 30 fps...hmm...
int config_max_fps = read_config_setting(TEXT("default_max_fps"), 30); // TODO allow floats [?] when ever requested
ASSERT(config_max_fps >= 0);
// m_rtFrameLength is also re-negotiated later...
m_rtFrameLength = UNITS / config_max_fps;
if(is_config_set_to_1(TEXT("track_new_x_y_coords_each_frame_if_1"))) {
m_bReReadRegistry = 1; // takes 0.416880ms, but I thought it took more when I made it off by default :P
}
if(is_config_set_to_1(TEXT("dedup_if_1"))) {
m_bDeDupe = 1; // takes 10 or 20ms...but useful to me! :)
}
m_millisToSleepBeforePollForChanges = read_config_setting(TEXT("millis_to_sleep_between_poll_for_dedupe_changes"), 10);
wchar_t out[1000];
swprintf(out, 1000, L"default/from reg read config as: %dx%d -> %dx%d (%dtop %db %dl %dr) %dfps, dedupe? %d, millis between dedupe polling %d, m_bReReadRegistry? %d \n",
m_iCaptureConfigHeight, m_iCaptureConfigWidth, getCaptureDesiredFinalHeight(), getCaptureDesiredFinalWidth(), m_rScreen.top, m_rScreen.bottom, m_rScreen.left, m_rScreen.right, config_max_fps, m_bDeDupe, m_millisToSleepBeforePollForChanges, m_bReReadRegistry);
LocalOutput(out); // warmup for the below debug :)
__int64 measureDebugOutputSpeed = StartCounter();
LocalOutput(out);
LocalOutput("writing a large-ish debug itself took: %.0Lf ms", GetCounterSinceStartMillis(measureDebugOutputSpeed));
// does this work with flash?
set_config_string_setting(L"last_init_config_was", out);
}
