void VM_Version::initialize() {
_features = determine_features();
PrefetchCopyIntervalInBytes = prefetch_copy_interval_in_bytes();
PrefetchScanIntervalInBytes = prefetch_scan_interval_in_bytes();
PrefetchFieldsAhead = prefetch_fields_ahead();
assert(0 <= AllocatePrefetchInstr && AllocatePrefetchInstr <= 1, "invalid value");
if( AllocatePrefetchInstr < 0 ) AllocatePrefetchInstr = 0;
if( AllocatePrefetchInstr > 1 ) AllocatePrefetchInstr = 0;
// Allocation prefetch settings
intx cache_line_size = prefetch_data_size();
if( cache_line_size > AllocatePrefetchStepSize )
AllocatePrefetchStepSize = cache_line_size;
assert(AllocatePrefetchLines > 0, "invalid value");
if( AllocatePrefetchLines < 1 ) // set valid value in product VM
AllocatePrefetchLines = 3;
assert(AllocateInstancePrefetchLines > 0, "invalid value");
if( AllocateInstancePrefetchLines < 1 ) // set valid value in product VM
AllocateInstancePrefetchLines = 1;
AllocatePrefetchDistance = allocate_prefetch_distance();
AllocatePrefetchStyle = allocate_prefetch_style();
assert((AllocatePrefetchDistance % AllocatePrefetchStepSize) == 0 &&
(AllocatePrefetchDistance > 0), "invalid value");
if ((AllocatePrefetchDistance % AllocatePrefetchStepSize) != 0 ||
(AllocatePrefetchDistance <= 0)) {
AllocatePrefetchDistance = AllocatePrefetchStepSize;
}
if (AllocatePrefetchStyle == 3 && !has_blk_init()) {
warning("BIS instructions are not available on this CPU");
FLAG_SET_DEFAULT(AllocatePrefetchStyle, 1);
}
guarantee(VM_Version::has_v9(), "only SPARC v9 is supported");
assert(ArraycopySrcPrefetchDistance < 4096, "invalid value");
if (ArraycopySrcPrefetchDistance >= 4096)
ArraycopySrcPrefetchDistance = 4064;
assert(ArraycopyDstPrefetchDistance < 4096, "invalid value");
if (ArraycopyDstPrefetchDistance >= 4096)
ArraycopyDstPrefetchDistance = 4064;
UseSSE = 0; // Only on x86 and x64
_supports_cx8 = has_v9();
_supports_atomic_getset4 = true; // swap instruction
// There are Fujitsu Sparc64 CPUs which support blk_init as well so
// we have to take this check out of the 'is_niagara()' block below.
if (has_blk_init()) {
// When using CMS or G1, we cannot use memset() in BOT updates
// because the sun4v/CMT version in libc_psr uses BIS which
// exposes "phantom zeros" to concurrent readers. See 6948537.
if (FLAG_IS_DEFAULT(UseMemSetInBOT) && (UseConcMarkSweepGC || UseG1GC)) {
FLAG_SET_DEFAULT(UseMemSetInBOT, false);
}
// Issue a stern warning if the user has explicitly set
// UseMemSetInBOT (it is known to cause issues), but allow
// use for experimentation and debugging.
if (UseConcMarkSweepGC || UseG1GC) {
if (UseMemSetInBOT) {
assert(!FLAG_IS_DEFAULT(UseMemSetInBOT), "Error");
warning("Experimental flag -XX:+UseMemSetInBOT is known to cause instability"
" on sun4v; please understand that you are using at your own risk!");
}
}
}
if (is_niagara()) {
// Indirect branch is the same cost as direct
if (FLAG_IS_DEFAULT(UseInlineCaches)) {
FLAG_SET_DEFAULT(UseInlineCaches, false);
}
// Align loops on a single instruction boundary.
if (FLAG_IS_DEFAULT(OptoLoopAlignment)) {
FLAG_SET_DEFAULT(OptoLoopAlignment, 4);
}
#ifdef _LP64
// 32-bit oops don't make sense for the 64-bit VM on sparc
// since the 32-bit VM has the same registers and smaller objects.
Universe::set_narrow_oop_shift(LogMinObjAlignmentInBytes);
Universe::set_narrow_klass_shift(LogKlassAlignmentInBytes);
#endif // _LP64
#ifdef COMPILER2
// Indirect branch is the same cost as direct
if (FLAG_IS_DEFAULT(UseJumpTables)) {
FLAG_SET_DEFAULT(UseJumpTables, true);
}
// Single-issue, so entry and loop tops are
// aligned on a single instruction boundary
if (FLAG_IS_DEFAULT(InteriorEntryAlignment)) {
FLAG_SET_DEFAULT(InteriorEntryAlignment, 4);
}
if (is_niagara_plus()) {
if (has_blk_init() && UseTLAB &&
FLAG_IS_DEFAULT(AllocatePrefetchInstr)) {
// Use BIS instruction for TLAB allocation prefetch.
FLAG_SET_ERGO(intx, AllocatePrefetchInstr, 1);
if (FLAG_IS_DEFAULT(AllocatePrefetchStyle)) {
FLAG_SET_ERGO(intx, AllocatePrefetchStyle, 3);
}
if (FLAG_IS_DEFAULT(AllocatePrefetchDistance)) {
// Use smaller prefetch distance with BIS
FLAG_SET_DEFAULT(AllocatePrefetchDistance, 64);
}
}
if (is_T4()) {
// Double number of prefetched cache lines on T4
// since L2 cache line size is smaller (32 bytes).
if (FLAG_IS_DEFAULT(AllocatePrefetchLines)) {
FLAG_SET_ERGO(intx, AllocatePrefetchLines, AllocatePrefetchLines*2);
}
if (FLAG_IS_DEFAULT(AllocateInstancePrefetchLines)) {
FLAG_SET_ERGO(intx, AllocateInstancePrefetchLines, AllocateInstancePrefetchLines*2);
}
}
if (AllocatePrefetchStyle != 3 && FLAG_IS_DEFAULT(AllocatePrefetchDistance)) {
// Use different prefetch distance without BIS
FLAG_SET_DEFAULT(AllocatePrefetchDistance, 256);
}
if (AllocatePrefetchInstr == 1) {
// Need a space at the end of TLAB for BIS since it
// will fault when accessing memory outside of heap.
// +1 for rounding up to next cache line, +1 to be safe
int lines = AllocatePrefetchLines + 2;
int step_size = AllocatePrefetchStepSize;
int distance = AllocatePrefetchDistance;
_reserve_for_allocation_prefetch = (distance + step_size*lines)/(int)HeapWordSize;
}
}
#endif
}
// Use hardware population count instruction if available.
if (has_hardware_popc()) {
if (FLAG_IS_DEFAULT(UsePopCountInstruction)) {
FLAG_SET_DEFAULT(UsePopCountInstruction, true);
}
} else if (UsePopCountInstruction) {
warning("POPC instruction is not available on this CPU");
FLAG_SET_DEFAULT(UsePopCountInstruction, false);
}
// T4 and newer Sparc cpus have new compare and branch instruction.
if (has_cbcond()) {
if (FLAG_IS_DEFAULT(UseCBCond)) {
FLAG_SET_DEFAULT(UseCBCond, true);
}
} else if (UseCBCond) {
warning("CBCOND instruction is not available on this CPU");
FLAG_SET_DEFAULT(UseCBCond, false);
}
assert(BlockZeroingLowLimit > 0, "invalid value");
if (has_block_zeroing()) {
if (FLAG_IS_DEFAULT(UseBlockZeroing)) {
FLAG_SET_DEFAULT(UseBlockZeroing, true);
}
} else if (UseBlockZeroing) {
warning("BIS zeroing instructions are not available on this CPU");
FLAG_SET_DEFAULT(UseBlockZeroing, false);
}
assert(BlockCopyLowLimit > 0, "invalid value");
if (has_block_zeroing()) { // has_blk_init() && is_T4(): core's local L2 cache
if (FLAG_IS_DEFAULT(UseBlockCopy)) {
FLAG_SET_DEFAULT(UseBlockCopy, true);
}
} else if (UseBlockCopy) {
warning("BIS instructions are not available or expensive on this CPU");
FLAG_SET_DEFAULT(UseBlockCopy, false);
}
#ifdef COMPILER2
// T4 and newer Sparc cpus have fast RDPC.
if (has_fast_rdpc() && FLAG_IS_DEFAULT(UseRDPCForConstantTableBase)) {
FLAG_SET_DEFAULT(UseRDPCForConstantTableBase, true);
}
// Currently not supported anywhere.
FLAG_SET_DEFAULT(UseFPUForSpilling, false);
MaxVectorSize = 8;
assert((InteriorEntryAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
#endif
assert((CodeEntryAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
assert((OptoLoopAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
char buf[512];
jio_snprintf(buf, sizeof(buf), "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
(has_v9() ? ", v9" : (has_v8() ? ", v8" : "")),
(has_hardware_popc() ? ", popc" : ""),
(has_vis1() ? ", vis1" : ""),
(has_vis2() ? ", vis2" : ""),
(has_vis3() ? ", vis3" : ""),
(has_blk_init() ? ", blk_init" : ""),
(has_cbcond() ? ", cbcond" : ""),
(has_aes() ? ", aes" : ""),
(is_ultra3() ? ", ultra3" : ""),
(is_sun4v() ? ", sun4v" : ""),
(is_niagara_plus() ? ", niagara_plus" : (is_niagara() ? ", niagara" : "")),
(is_sparc64() ? ", sparc64" : ""),
(!has_hardware_mul32() ? ", no-mul32" : ""),
(!has_hardware_div32() ? ", no-div32" : ""),
(!has_hardware_fsmuld() ? ", no-fsmuld" : ""));
// buf is started with ", " or is empty
_features_str = strdup(strlen(buf) > 2 ? buf + 2 : buf);
// UseVIS is set to the smallest of what hardware supports and what
// the command line requires. I.e., you cannot set UseVIS to 3 on
// older UltraSparc which do not support it.
if (UseVIS > 3) UseVIS=3;
if (UseVIS < 0) UseVIS=0;
if (!has_vis3()) // Drop to 2 if no VIS3 support
UseVIS = MIN2((intx)2,UseVIS);
if (!has_vis2()) // Drop to 1 if no VIS2 support
UseVIS = MIN2((intx)1,UseVIS);
if (!has_vis1()) // Drop to 0 if no VIS1 support
UseVIS = 0;
// T2 and above should have support for AES instructions
if (has_aes()) {
if (UseVIS > 0) { // AES intrinsics use FXOR instruction which is VIS1
if (FLAG_IS_DEFAULT(UseAES)) {
FLAG_SET_DEFAULT(UseAES, true);
}
if (FLAG_IS_DEFAULT(UseAESIntrinsics)) {
FLAG_SET_DEFAULT(UseAESIntrinsics, true);
}
// we disable both the AES flags if either of them is disabled on the command line
if (!UseAES || !UseAESIntrinsics) {
FLAG_SET_DEFAULT(UseAES, false);
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
} else {
if (UseAES || UseAESIntrinsics) {
warning("SPARC AES intrinsics require VIS1 instruction support. Intrinsics will be disabled.");
if (UseAES) {
FLAG_SET_DEFAULT(UseAES, false);
}
if (UseAESIntrinsics) {
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
}
}
} else if (UseAES || UseAESIntrinsics) {
warning("AES instructions are not available on this CPU");
if (UseAES) {
FLAG_SET_DEFAULT(UseAES, false);
}
if (UseAESIntrinsics) {
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
}
if (FLAG_IS_DEFAULT(ContendedPaddingWidth) &&
(cache_line_size > ContendedPaddingWidth))
ContendedPaddingWidth = cache_line_size;
#ifndef PRODUCT
if (PrintMiscellaneous && Verbose) {
tty->print("Allocation");
if (AllocatePrefetchStyle <= 0) {
tty->print_cr(": no prefetching");
} else {
tty->print(" prefetching: ");
if (AllocatePrefetchInstr == 0) {
tty->print("PREFETCH");
} else if (AllocatePrefetchInstr == 1) {
tty->print("BIS");
}
if (AllocatePrefetchLines > 1) {
tty->print_cr(" at distance %d, %d lines of %d bytes", AllocatePrefetchDistance, AllocatePrefetchLines, AllocatePrefetchStepSize);
} else {
tty->print_cr(" at distance %d, one line of %d bytes", AllocatePrefetchDistance, AllocatePrefetchStepSize);
}
}
if (PrefetchCopyIntervalInBytes > 0) {
tty->print_cr("PrefetchCopyIntervalInBytes %d", PrefetchCopyIntervalInBytes);
}
if (PrefetchScanIntervalInBytes > 0) {
tty->print_cr("PrefetchScanIntervalInBytes %d", PrefetchScanIntervalInBytes);
}
if (PrefetchFieldsAhead > 0) {
tty->print_cr("PrefetchFieldsAhead %d", PrefetchFieldsAhead);
}
if (ContendedPaddingWidth > 0) {
tty->print_cr("ContendedPaddingWidth %d", ContendedPaddingWidth);
}
}
#endif // PRODUCT
}
static bool has_fast_idiv() { return is_niagara_plus() || is_sparc64(); }
static bool is_ultra3() { return (_features & ultra3_m) == ultra3_m && !is_sun4v() && !is_sparc64(); }
static bool has_fast_fxtof() { return is_niagara() || is_sparc64() || has_v9() && !is_ultra3(); }
void VM_Version::initialize() {
_features = determine_features();
PrefetchCopyIntervalInBytes = prefetch_copy_interval_in_bytes();
PrefetchScanIntervalInBytes = prefetch_scan_interval_in_bytes();
PrefetchFieldsAhead = prefetch_fields_ahead();
// Allocation prefetch settings
intx cache_line_size = prefetch_data_size();
if( cache_line_size > AllocatePrefetchStepSize )
AllocatePrefetchStepSize = cache_line_size;
assert(AllocatePrefetchLines > 0, "invalid value");
if( AllocatePrefetchLines < 1 ) // set valid value in product VM
AllocatePrefetchLines = 3;
assert(AllocateInstancePrefetchLines > 0, "invalid value");
if( AllocateInstancePrefetchLines < 1 ) // set valid value in product VM
AllocateInstancePrefetchLines = 1;
AllocatePrefetchDistance = allocate_prefetch_distance();
AllocatePrefetchStyle = allocate_prefetch_style();
if (AllocatePrefetchStyle == 3 && !has_blk_init()) {
warning("BIS instructions are not available on this CPU");
FLAG_SET_DEFAULT(AllocatePrefetchStyle, 1);
}
guarantee(VM_Version::has_v9(), "only SPARC v9 is supported");
UseSSE = 0; // Only on x86 and x64
_supports_cx8 = has_v9();
_supports_atomic_getset4 = true; // swap instruction
if (is_niagara()) {
// Indirect branch is the same cost as direct
if (FLAG_IS_DEFAULT(UseInlineCaches)) {
FLAG_SET_DEFAULT(UseInlineCaches, false);
}
// Align loops on a single instruction boundary.
if (FLAG_IS_DEFAULT(OptoLoopAlignment)) {
FLAG_SET_DEFAULT(OptoLoopAlignment, 4);
}
#ifdef _LP64
// 32-bit oops don't make sense for the 64-bit VM on sparc
// since the 32-bit VM has the same registers and smaller objects.
Universe::set_narrow_oop_shift(LogMinObjAlignmentInBytes);
Universe::set_narrow_klass_shift(LogKlassAlignmentInBytes);
#endif // _LP64
#ifdef COMPILER2
// Indirect branch is the same cost as direct
if (FLAG_IS_DEFAULT(UseJumpTables)) {
FLAG_SET_DEFAULT(UseJumpTables, true);
}
// Single-issue, so entry and loop tops are
// aligned on a single instruction boundary
if (FLAG_IS_DEFAULT(InteriorEntryAlignment)) {
FLAG_SET_DEFAULT(InteriorEntryAlignment, 4);
}
if (is_niagara_plus()) {
if (has_blk_init() && UseTLAB &&
FLAG_IS_DEFAULT(AllocatePrefetchInstr)) {
// Use BIS instruction for TLAB allocation prefetch.
FLAG_SET_ERGO(intx, AllocatePrefetchInstr, 1);
if (FLAG_IS_DEFAULT(AllocatePrefetchStyle)) {
FLAG_SET_ERGO(intx, AllocatePrefetchStyle, 3);
}
if (FLAG_IS_DEFAULT(AllocatePrefetchDistance)) {
// Use smaller prefetch distance with BIS
FLAG_SET_DEFAULT(AllocatePrefetchDistance, 64);
}
}
if (is_T4()) {
// Double number of prefetched cache lines on T4
// since L2 cache line size is smaller (32 bytes).
if (FLAG_IS_DEFAULT(AllocatePrefetchLines)) {
FLAG_SET_ERGO(intx, AllocatePrefetchLines, AllocatePrefetchLines*2);
}
if (FLAG_IS_DEFAULT(AllocateInstancePrefetchLines)) {
FLAG_SET_ERGO(intx, AllocateInstancePrefetchLines, AllocateInstancePrefetchLines*2);
}
}
if (AllocatePrefetchStyle != 3 && FLAG_IS_DEFAULT(AllocatePrefetchDistance)) {
// Use different prefetch distance without BIS
FLAG_SET_DEFAULT(AllocatePrefetchDistance, 256);
}
if (AllocatePrefetchInstr == 1) {
// Need a space at the end of TLAB for BIS since it
// will fault when accessing memory outside of heap.
// +1 for rounding up to next cache line, +1 to be safe
int lines = AllocatePrefetchLines + 2;
int step_size = AllocatePrefetchStepSize;
int distance = AllocatePrefetchDistance;
_reserve_for_allocation_prefetch = (distance + step_size*lines)/(int)HeapWordSize;
}
}
#endif
}
// Use hardware population count instruction if available.
if (has_hardware_popc()) {
if (FLAG_IS_DEFAULT(UsePopCountInstruction)) {
FLAG_SET_DEFAULT(UsePopCountInstruction, true);
}
} else if (UsePopCountInstruction) {
warning("POPC instruction is not available on this CPU");
FLAG_SET_DEFAULT(UsePopCountInstruction, false);
}
// T4 and newer Sparc cpus have new compare and branch instruction.
if (has_cbcond()) {
if (FLAG_IS_DEFAULT(UseCBCond)) {
FLAG_SET_DEFAULT(UseCBCond, true);
}
} else if (UseCBCond) {
warning("CBCOND instruction is not available on this CPU");
FLAG_SET_DEFAULT(UseCBCond, false);
}
assert(BlockZeroingLowLimit > 0, "invalid value");
if (has_block_zeroing() && cache_line_size > 0) {
if (FLAG_IS_DEFAULT(UseBlockZeroing)) {
FLAG_SET_DEFAULT(UseBlockZeroing, true);
}
} else if (UseBlockZeroing) {
warning("BIS zeroing instructions are not available on this CPU");
FLAG_SET_DEFAULT(UseBlockZeroing, false);
}
assert(BlockCopyLowLimit > 0, "invalid value");
if (has_block_zeroing() && cache_line_size > 0) { // has_blk_init() && is_T4(): core's local L2 cache
if (FLAG_IS_DEFAULT(UseBlockCopy)) {
FLAG_SET_DEFAULT(UseBlockCopy, true);
}
} else if (UseBlockCopy) {
warning("BIS instructions are not available or expensive on this CPU");
FLAG_SET_DEFAULT(UseBlockCopy, false);
}
#ifdef COMPILER2
// T4 and newer Sparc cpus have fast RDPC.
if (has_fast_rdpc() && FLAG_IS_DEFAULT(UseRDPCForConstantTableBase)) {
FLAG_SET_DEFAULT(UseRDPCForConstantTableBase, true);
}
// Currently not supported anywhere.
FLAG_SET_DEFAULT(UseFPUForSpilling, false);
MaxVectorSize = 8;
assert((InteriorEntryAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
#endif
assert((CodeEntryAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
assert((OptoLoopAlignment % relocInfo::addr_unit()) == 0, "alignment is not a multiple of NOP size");
char buf[512];
jio_snprintf(buf, sizeof(buf), "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
(has_v9() ? ", v9" : (has_v8() ? ", v8" : "")),
(has_hardware_popc() ? ", popc" : ""),
(has_vis1() ? ", vis1" : ""),
(has_vis2() ? ", vis2" : ""),
(has_vis3() ? ", vis3" : ""),
(has_blk_init() ? ", blk_init" : ""),
(has_cbcond() ? ", cbcond" : ""),
(has_aes() ? ", aes" : ""),
(has_sha1() ? ", sha1" : ""),
(has_sha256() ? ", sha256" : ""),
(has_sha512() ? ", sha512" : ""),
(has_crc32c() ? ", crc32c" : ""),
(is_ultra3() ? ", ultra3" : ""),
(is_sun4v() ? ", sun4v" : ""),
(is_niagara_plus() ? ", niagara_plus" : (is_niagara() ? ", niagara" : "")),
(is_sparc64() ? ", sparc64" : ""),
(!has_hardware_mul32() ? ", no-mul32" : ""),
(!has_hardware_div32() ? ", no-div32" : ""),
(!has_hardware_fsmuld() ? ", no-fsmuld" : ""));
// buf is started with ", " or is empty
_features_str = os::strdup(strlen(buf) > 2 ? buf + 2 : buf);
// UseVIS is set to the smallest of what hardware supports and what
// the command line requires. I.e., you cannot set UseVIS to 3 on
// older UltraSparc which do not support it.
if (UseVIS > 3) UseVIS=3;
if (UseVIS < 0) UseVIS=0;
if (!has_vis3()) // Drop to 2 if no VIS3 support
UseVIS = MIN2((intx)2,UseVIS);
if (!has_vis2()) // Drop to 1 if no VIS2 support
UseVIS = MIN2((intx)1,UseVIS);
if (!has_vis1()) // Drop to 0 if no VIS1 support
UseVIS = 0;
// SPARC T4 and above should have support for AES instructions
if (has_aes()) {
if (FLAG_IS_DEFAULT(UseAES)) {
FLAG_SET_DEFAULT(UseAES, true);
}
if (!UseAES) {
if (UseAESIntrinsics && !FLAG_IS_DEFAULT(UseAESIntrinsics)) {
warning("AES intrinsics require UseAES flag to be enabled. Intrinsics will be disabled.");
}
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
} else {
// The AES intrinsic stubs require AES instruction support (of course)
// but also require VIS3 mode or higher for instructions it use.
if (UseVIS > 2) {
if (FLAG_IS_DEFAULT(UseAESIntrinsics)) {
FLAG_SET_DEFAULT(UseAESIntrinsics, true);
}
} else {
if (UseAESIntrinsics && !FLAG_IS_DEFAULT(UseAESIntrinsics)) {
warning("SPARC AES intrinsics require VIS3 instructions. Intrinsics will be disabled.");
}
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
}
} else if (UseAES || UseAESIntrinsics) {
if (UseAES && !FLAG_IS_DEFAULT(UseAES)) {
warning("AES instructions are not available on this CPU");
FLAG_SET_DEFAULT(UseAES, false);
}
if (UseAESIntrinsics && !FLAG_IS_DEFAULT(UseAESIntrinsics)) {
warning("AES intrinsics are not available on this CPU");
FLAG_SET_DEFAULT(UseAESIntrinsics, false);
}
}
// GHASH/GCM intrinsics
if (has_vis3() && (UseVIS > 2)) {
if (FLAG_IS_DEFAULT(UseGHASHIntrinsics)) {
UseGHASHIntrinsics = true;
}
} else if (UseGHASHIntrinsics) {
if (!FLAG_IS_DEFAULT(UseGHASHIntrinsics))
warning("GHASH intrinsics require VIS3 instruction support. Intrinsics will be disabled");
FLAG_SET_DEFAULT(UseGHASHIntrinsics, false);
}
// SHA1, SHA256, and SHA512 instructions were added to SPARC T-series at different times
if (has_sha1() || has_sha256() || has_sha512()) {
if (UseVIS > 0) { // SHA intrinsics use VIS1 instructions
if (FLAG_IS_DEFAULT(UseSHA)) {
FLAG_SET_DEFAULT(UseSHA, true);
}
} else {
if (UseSHA) {
warning("SPARC SHA intrinsics require VIS1 instruction support. Intrinsics will be disabled.");
FLAG_SET_DEFAULT(UseSHA, false);
}
}
} else if (UseSHA) {
warning("SHA instructions are not available on this CPU");
FLAG_SET_DEFAULT(UseSHA, false);
}
if (UseSHA && has_sha1()) {
if (FLAG_IS_DEFAULT(UseSHA1Intrinsics)) {
FLAG_SET_DEFAULT(UseSHA1Intrinsics, true);
}
} else if (UseSHA1Intrinsics) {
warning("Intrinsics for SHA-1 crypto hash functions not available on this CPU.");
FLAG_SET_DEFAULT(UseSHA1Intrinsics, false);
}
if (UseSHA && has_sha256()) {
if (FLAG_IS_DEFAULT(UseSHA256Intrinsics)) {
FLAG_SET_DEFAULT(UseSHA256Intrinsics, true);
}
} else if (UseSHA256Intrinsics) {
warning("Intrinsics for SHA-224 and SHA-256 crypto hash functions not available on this CPU.");
FLAG_SET_DEFAULT(UseSHA256Intrinsics, false);
}
if (UseSHA && has_sha512()) {
if (FLAG_IS_DEFAULT(UseSHA512Intrinsics)) {
FLAG_SET_DEFAULT(UseSHA512Intrinsics, true);
}
} else if (UseSHA512Intrinsics) {
warning("Intrinsics for SHA-384 and SHA-512 crypto hash functions not available on this CPU.");
FLAG_SET_DEFAULT(UseSHA512Intrinsics, false);
}
if (!(UseSHA1Intrinsics || UseSHA256Intrinsics || UseSHA512Intrinsics)) {
FLAG_SET_DEFAULT(UseSHA, false);
}
// SPARC T4 and above should have support for CRC32C instruction
if (has_crc32c()) {
if (UseVIS > 2) { // CRC32C intrinsics use VIS3 instructions
if (FLAG_IS_DEFAULT(UseCRC32CIntrinsics)) {
FLAG_SET_DEFAULT(UseCRC32CIntrinsics, true);
}
} else {
if (UseCRC32CIntrinsics) {
warning("SPARC CRC32C intrinsics require VIS3 instruction support. Intrinsics will be disabled.");
FLAG_SET_DEFAULT(UseCRC32CIntrinsics, false);
}
}
} else if (UseCRC32CIntrinsics) {
warning("CRC32C instruction is not available on this CPU");
FLAG_SET_DEFAULT(UseCRC32CIntrinsics, false);
}
if (UseVIS > 2) {
if (FLAG_IS_DEFAULT(UseAdler32Intrinsics)) {
FLAG_SET_DEFAULT(UseAdler32Intrinsics, true);
}
} else if (UseAdler32Intrinsics) {
warning("SPARC Adler32 intrinsics require VIS3 instruction support. Intrinsics will be disabled.");
FLAG_SET_DEFAULT(UseAdler32Intrinsics, false);
}
if (UseVIS > 2) {
if (FLAG_IS_DEFAULT(UseCRC32Intrinsics)) {
FLAG_SET_DEFAULT(UseCRC32Intrinsics, true);
}
} else if (UseCRC32Intrinsics) {
warning("SPARC CRC32 intrinsics require VIS3 insructions support. Intriniscs will be disabled");
FLAG_SET_DEFAULT(UseCRC32Intrinsics, false);
}
if (FLAG_IS_DEFAULT(ContendedPaddingWidth) &&
(cache_line_size > ContendedPaddingWidth))
ContendedPaddingWidth = cache_line_size;
// This machine does not allow unaligned memory accesses
if (UseUnalignedAccesses) {
if (!FLAG_IS_DEFAULT(UseUnalignedAccesses))
warning("Unaligned memory access is not available on this CPU");
FLAG_SET_DEFAULT(UseUnalignedAccesses, false);
}
if (PrintMiscellaneous && Verbose) {
tty->print_cr("L1 data cache line size: %u", L1_data_cache_line_size());
tty->print_cr("L2 data cache line size: %u", L2_data_cache_line_size());
tty->print("Allocation");
if (AllocatePrefetchStyle <= 0) {
tty->print_cr(": no prefetching");
} else {
tty->print(" prefetching: ");
if (AllocatePrefetchInstr == 0) {
tty->print("PREFETCH");
} else if (AllocatePrefetchInstr == 1) {
tty->print("BIS");
}
if (AllocatePrefetchLines > 1) {
tty->print_cr(" at distance %d, %d lines of %d bytes", (int) AllocatePrefetchDistance, (int) AllocatePrefetchLines, (int) AllocatePrefetchStepSize);
} else {
tty->print_cr(" at distance %d, one line of %d bytes", (int) AllocatePrefetchDistance, (int) AllocatePrefetchStepSize);
}
}
if (PrefetchCopyIntervalInBytes > 0) {
tty->print_cr("PrefetchCopyIntervalInBytes %d", (int) PrefetchCopyIntervalInBytes);
}
if (PrefetchScanIntervalInBytes > 0) {
tty->print_cr("PrefetchScanIntervalInBytes %d", (int) PrefetchScanIntervalInBytes);
}
if (PrefetchFieldsAhead > 0) {
tty->print_cr("PrefetchFieldsAhead %d", (int) PrefetchFieldsAhead);
}
if (ContendedPaddingWidth > 0) {
tty->print_cr("ContendedPaddingWidth %d", (int) ContendedPaddingWidth);
}
}
}