/* Return the fingerprint of the certificate (we can't put this into
libksba because we need libgcrypt support). The caller must
provide an array of sufficient length or NULL so that the function
allocates the array. If r_len is not NULL, the length of the
digest is returned; well, this can also be done by using
gcry_md_get_algo_dlen(). If algo is 0, a SHA-1 will be used.
If there is a problem , the function does never return NULL but a
digest of all 0xff.
*/
unsigned char *
gpgsm_get_fingerprint (ksba_cert_t cert, int algo,
unsigned char *array, int *r_len)
{
gcry_md_hd_t md;
int rc, len;
if (!algo)
algo = GCRY_MD_SHA1;
len = gcry_md_get_algo_dlen (algo);
assert (len);
if (!array)
array = xmalloc (len);
if (r_len)
*r_len = len;
/* Fist check whether we have cached the fingerprint. */
if (algo == GCRY_MD_SHA1)
{
size_t buflen;
assert (len >= 20);
if (!ksba_cert_get_user_data (cert, "sha1-fingerprint",
array, len, &buflen)
&& buflen == 20)
return array;
}
/* No, need to compute it. */
rc = gcry_md_open (&md, algo, 0);
if (rc)
{
log_error ("md_open failed: %s\n", gpg_strerror (rc));
memset (array, 0xff, len); /* better return an invalid fpr than NULL */
return array;
}
rc = ksba_cert_hash (cert, 0, HASH_FNC, md);
if (rc)
{
log_error ("ksba_cert_hash failed: %s\n", gpg_strerror (rc));
gcry_md_close (md);
memset (array, 0xff, len); /* better return an invalid fpr than NULL */
return array;
}
gcry_md_final (md);
memcpy (array, gcry_md_read(md, algo), len );
gcry_md_close (md);
/* Cache an SHA-1 fingerprint. */
if ( algo == GCRY_MD_SHA1 )
ksba_cert_set_user_data (cert, "sha1-fingerprint", array, 20);
return array;
}
/* Validate the certificate CHAIN up to the trust anchor. Optionally
return the closest expiration time in R_EXPTIME (this is useful for
caching issues). MODE is one of the VALIDATE_MODE_* constants.
If R_TRUST_ANCHOR is not NULL and the validation would fail only
because the root certificate is not trusted, the hexified
fingerprint of that root certificate is stored at R_TRUST_ANCHOR
and success is returned. The caller needs to free the value at
R_TRUST_ANCHOR; in all other cases NULL is stored there. */
gpg_error_t
validate_cert_chain (ctrl_t ctrl, ksba_cert_t cert, ksba_isotime_t r_exptime,
int mode, char **r_trust_anchor)
{
gpg_error_t err = 0;
int depth, maxdepth;
char *issuer = NULL;
char *subject = NULL;
ksba_cert_t subject_cert = NULL, issuer_cert = NULL;
ksba_isotime_t current_time;
ksba_isotime_t exptime;
int any_expired = 0;
int any_no_policy_match = 0;
chain_item_t chain;
if (r_exptime)
*r_exptime = 0;
*exptime = 0;
if (r_trust_anchor)
*r_trust_anchor = NULL;
if (!opt.system_daemon)
{
/* For backward compatibility we only do this in daemon mode. */
log_info (_("running in compatibility mode - "
"certificate chain not checked!\n"));
return 0; /* Okay. */
}
if (DBG_X509)
dump_cert ("subject", cert);
/* May the target certificate be used for this purpose? */
switch (mode)
{
case VALIDATE_MODE_OCSP:
err = cert_use_ocsp_p (cert);
break;
case VALIDATE_MODE_CRL:
case VALIDATE_MODE_CRL_RECURSIVE:
err = cert_use_crl_p (cert);
break;
default:
err = 0;
break;
}
if (err)
return err;
/* If we already validated the certificate not too long ago, we can
avoid the excessive computations and lookups unless the caller
asked for the expiration time. */
if (!r_exptime)
{
size_t buflen;
time_t validated_at;
err = ksba_cert_get_user_data (cert, "validated_at",
&validated_at, sizeof (validated_at),
&buflen);
if (err || buflen != sizeof (validated_at) || !validated_at)
err = 0; /* Not available or other error. */
else
{
/* If the validation is not older than 30 minutes we are ready. */
if (validated_at < gnupg_get_time () + (30*60))
{
if (opt.verbose)
log_info ("certificate is good (cached)\n");
/* Note, that we can't jump to leave here as this would
falsely updated the validation timestamp. */
return 0;
}
}
}
/* Get the current time. */
gnupg_get_isotime (current_time);
/* We walk up the chain until we find a trust anchor. */
subject_cert = cert;
maxdepth = 10;
chain = NULL;
depth = 0;
for (;;)
{
/* Get the subject and issuer name from the current
certificate. */
ksba_free (issuer);
ksba_free (subject);
issuer = ksba_cert_get_issuer (subject_cert, 0);
subject = ksba_cert_get_subject (subject_cert, 0);
if (!issuer)
{
log_error (_("no issuer found in certificate\n"));
err = gpg_error (GPG_ERR_BAD_CERT);
goto leave;
}
/* Handle the notBefore and notAfter timestamps. */
{
ksba_isotime_t not_before, not_after;
err = ksba_cert_get_validity (subject_cert, 0, not_before);
if (!err)
err = ksba_cert_get_validity (subject_cert, 1, not_after);
if (err)
{
log_error (_("certificate with invalid validity: %s"),
gpg_strerror (err));
err = gpg_error (GPG_ERR_BAD_CERT);
goto leave;
}
/* Keep track of the nearest expiration time in EXPTIME. */
if (*not_after)
{
if (!*exptime)
gnupg_copy_time (exptime, not_after);
else if (strcmp (not_after, exptime) < 0 )
gnupg_copy_time (exptime, not_after);
}
/* Check whether the certificate is already valid. */
if (*not_before && strcmp (current_time, not_before) < 0 )
{
log_error (_("certificate not yet valid"));
log_info ("(valid from ");
dump_isotime (not_before);
log_printf (")\n");
err = gpg_error (GPG_ERR_CERT_TOO_YOUNG);
goto leave;
}
/* Now check whether the certificate has expired. */
if (*not_after && strcmp (current_time, not_after) > 0 )
{
log_error (_("certificate has expired"));
log_info ("(expired at ");
dump_isotime (not_after);
log_printf (")\n");
any_expired = 1;
}
}
/* Do we have any critical extensions in the certificate we
can't handle? */
err = unknown_criticals (subject_cert);
if (err)
goto leave; /* yes. */
/* Check that given policies are allowed. */
err = check_cert_policy (subject_cert);
if (gpg_err_code (err) == GPG_ERR_NO_POLICY_MATCH)
{
any_no_policy_match = 1;
err = 0;
}
else if (err)
goto leave;
/* Is this a self-signed certificate? */
if (is_root_cert ( subject_cert, issuer, subject))
{
/* Yes, this is our trust anchor. */
if (check_cert_sig (subject_cert, subject_cert) )
{
log_error (_("selfsigned certificate has a BAD signature"));
err = gpg_error (depth? GPG_ERR_BAD_CERT_CHAIN
: GPG_ERR_BAD_CERT);
goto leave;
}
/* Is this certificate allowed to act as a CA. */
err = allowed_ca (subject_cert, NULL);
if (err)
goto leave; /* No. */
err = is_trusted_cert (subject_cert);
if (!err)
; /* Yes we trust this cert. */
else if (gpg_err_code (err) == GPG_ERR_NOT_TRUSTED)
{
char *fpr;
log_error (_("root certificate is not marked trusted"));
fpr = get_fingerprint_hexstring (subject_cert);
log_info (_("fingerprint=%s\n"), fpr? fpr : "?");
dump_cert ("issuer", subject_cert);
if (r_trust_anchor)
{
/* Caller wants to do another trustiness check. */
*r_trust_anchor = fpr;
err = 0;
}
else
xfree (fpr);
}
else
{
log_error (_("checking trustworthiness of "
"root certificate failed: %s\n"),
gpg_strerror (err));
}
if (err)
goto leave;
/* Prepend the certificate to our list. */
{
chain_item_t ci;
ci = xtrycalloc (1, sizeof *ci);
if (!ci)
{
err = gpg_error_from_errno (errno);
goto leave;
}
ksba_cert_ref (subject_cert);
ci->cert = subject_cert;
cert_compute_fpr (subject_cert, ci->fpr);
ci->next = chain;
chain = ci;
}
if (opt.verbose)
{
if (r_trust_anchor && *r_trust_anchor)
log_info ("root certificate is good but not trusted\n");
else
log_info ("root certificate is good and trusted\n");
}
break; /* Okay: a self-signed certicate is an end-point. */
}
/* To avoid loops, we use an arbitrary limit on the length of
the chain. */
depth++;
if (depth > maxdepth)
{
log_error (_("certificate chain too long\n"));
err = gpg_error (GPG_ERR_BAD_CERT_CHAIN);
goto leave;
}
/* Find the next cert up the tree. */
ksba_cert_release (issuer_cert); issuer_cert = NULL;
err = find_issuing_cert (ctrl, subject_cert, &issuer_cert);
if (err)
{
if (gpg_err_code (err) == GPG_ERR_NOT_FOUND)
{
log_error (_("issuer certificate not found"));
log_info ("issuer certificate: #/");
dump_string (issuer);
log_printf ("\n");
}
else
log_error (_("issuer certificate not found: %s\n"),
gpg_strerror (err));
/* Use a better understandable error code. */
err = gpg_error (GPG_ERR_MISSING_ISSUER_CERT);
goto leave;
}
/* try_another_cert: */
if (DBG_X509)
{
log_debug ("got issuer's certificate:\n");
dump_cert ("issuer", issuer_cert);
}
/* Now check the signature of the certificate. Well, we
should delay this until later so that faked certificates
can't be turned into a DoS easily. */
err = check_cert_sig (issuer_cert, subject_cert);
if (err)
{
log_error (_("certificate has a BAD signature"));
#if 0
if (gpg_err_code (err) == GPG_ERR_BAD_SIGNATURE)
{
/* We now try to find other issuer certificates which
might have been used. This is required because some
CAs are reusing the issuer and subject DN for new
root certificates without using a authorityKeyIdentifier. */
rc = find_up (kh, subject_cert, issuer, 1);
if (!rc)
{
ksba_cert_t tmp_cert;
rc = keydb_get_cert (kh, &tmp_cert);
if (rc || !compare_certs (issuer_cert, tmp_cert))
{
/* The find next did not work or returned an
identical certificate. We better stop here
to avoid infinite checks. */
rc = gpg_error (GPG_ERR_BAD_SIGNATURE);
ksba_cert_release (tmp_cert);
}
else
{
do_list (0, lm, fp, _("found another possible matching "
"CA certificate - trying again"));
ksba_cert_release (issuer_cert);
issuer_cert = tmp_cert;
goto try_another_cert;
}
}
}
#endif
/* We give a more descriptive error code than the one
returned from the signature checking. */
err = gpg_error (GPG_ERR_BAD_CERT_CHAIN);
goto leave;
}
/* Check that the length of the chain is not longer than allowed
by the CA. */
{
int chainlen;
err = allowed_ca (issuer_cert, &chainlen);
if (err)
goto leave;
if (chainlen >= 0 && (depth - 1) > chainlen)
{
log_error (_("certificate chain longer than allowed by CA (%d)"),
chainlen);
err = gpg_error (GPG_ERR_BAD_CERT_CHAIN);
goto leave;
}
}
/* May that certificate be used for certification? */
err = cert_use_cert_p (issuer_cert);
if (err)
goto leave; /* No. */
/* Prepend the certificate to our list. */
{
chain_item_t ci;
ci = xtrycalloc (1, sizeof *ci);
if (!ci)
{
err = gpg_error_from_errno (errno);
goto leave;
}
ksba_cert_ref (subject_cert);
ci->cert = subject_cert;
cert_compute_fpr (subject_cert, ci->fpr);
ci->next = chain;
chain = ci;
}
if (opt.verbose)
log_info (_("certificate is good\n"));
/* Now to the next level up. */
subject_cert = issuer_cert;
issuer_cert = NULL;
}
if (!err)
{ /* If we encountered an error somewhere during the checks, set
the error code to the most critical one */
if (any_expired)
err = gpg_error (GPG_ERR_CERT_EXPIRED);
else if (any_no_policy_match)
err = gpg_error (GPG_ERR_NO_POLICY_MATCH);
}
if (!err && opt.verbose)
{
chain_item_t citem;
log_info (_("certificate chain is good\n"));
for (citem = chain; citem; citem = citem->next)
cert_log_name (" certificate", citem->cert);
}
if (!err && mode != VALIDATE_MODE_CRL)
{ /* Now that everything is fine, walk the chain and check each
certificate for revocations.
1. item in the chain - The root certificate.
2. item - the CA below the root
last item - the target certificate.
Now for each certificate in the chain check whether it has
been included in a CRL and thus be revoked. We don't do OCSP
here because this does not seem to make much sense. This
might become a recursive process and we should better cache
our validity results to avoid double work. Far worse a
catch-22 may happen for an improper setup hierarchy and we
need a way to break up such a deadlock. */
err = check_revocations (ctrl, chain);
}
if (!err && opt.verbose)
{
if (r_trust_anchor && *r_trust_anchor)
log_info ("target certificate may be valid\n");
else
log_info ("target certificate is valid\n");
}
else if (err && opt.verbose)
log_info ("target certificate is NOT valid\n");
leave:
if (!err && !(r_trust_anchor && *r_trust_anchor))
{
/* With no error we can update the validation cache. We do this
for all certificates in the chain. Note that we can't use
the cache if the caller requested to check the trustiness of
the root certificate himself. Adding such a feature would
require us to also store the fingerprint of root
certificate. */
chain_item_t citem;
time_t validated_at = gnupg_get_time ();
for (citem = chain; citem; citem = citem->next)
{
err = ksba_cert_set_user_data (citem->cert, "validated_at",
&validated_at, sizeof (validated_at));
if (err)
{
log_error ("set_user_data(validated_at) failed: %s\n",
gpg_strerror (err));
err = 0;
}
}
}
if (r_exptime)
gnupg_copy_time (r_exptime, exptime);
ksba_free (issuer);
ksba_free (subject);
ksba_cert_release (issuer_cert);
if (subject_cert != cert)
ksba_cert_release (subject_cert);
while (chain)
{
chain_item_t ci_next = chain->next;
if (chain->cert)
ksba_cert_release (chain->cert);
xfree (chain);
chain = ci_next;
}
if (err && r_trust_anchor && *r_trust_anchor)
{
xfree (*r_trust_anchor);
*r_trust_anchor = NULL;
}
return err;
}
/* Check whether the certificate either given by fingerprint CERT_FPR
or directly through the CERT object is valid by running an OCSP
transaction. With FORCE_DEFAULT_RESPONDER set only the configured
default responder is used. */
gpg_error_t
ocsp_isvalid (ctrl_t ctrl, ksba_cert_t cert, const char *cert_fpr,
int force_default_responder)
{
gpg_error_t err;
ksba_ocsp_t ocsp = NULL;
ksba_cert_t issuer_cert = NULL;
ksba_sexp_t sigval = NULL;
gcry_sexp_t s_sig = NULL;
ksba_isotime_t current_time;
ksba_isotime_t this_update, next_update, revocation_time, produced_at;
ksba_isotime_t tmp_time;
ksba_status_t status;
ksba_crl_reason_t reason;
char *url_buffer = NULL;
const char *url;
gcry_md_hd_t md = NULL;
int i, idx;
char *oid;
ksba_name_t name;
fingerprint_list_t default_signer = NULL;
/* Get the certificate. */
if (cert)
{
ksba_cert_ref (cert);
err = find_issuing_cert (ctrl, cert, &issuer_cert);
if (err)
{
log_error (_("issuer certificate not found: %s\n"),
gpg_strerror (err));
goto leave;
}
}
else
{
cert = get_cert_local (ctrl, cert_fpr);
if (!cert)
{
log_error (_("caller did not return the target certificate\n"));
err = gpg_error (GPG_ERR_GENERAL);
goto leave;
}
issuer_cert = get_issuing_cert_local (ctrl, NULL);
if (!issuer_cert)
{
log_error (_("caller did not return the issuing certificate\n"));
err = gpg_error (GPG_ERR_GENERAL);
goto leave;
}
}
/* Create an OCSP instance. */
err = ksba_ocsp_new (&ocsp);
if (err)
{
log_error (_("failed to allocate OCSP context: %s\n"),
gpg_strerror (err));
goto leave;
}
/* Figure out the OCSP responder to use.
1. Try to get the reponder from the certificate.
We do only take http and https style URIs into account.
2. If this fails use the default responder, if any.
*/
url = NULL;
for (idx=0; !url && !opt.ignore_ocsp_service_url && !force_default_responder
&& !(err=ksba_cert_get_authority_info_access (cert, idx,
&oid, &name)); idx++)
{
if ( !strcmp (oid, oidstr_ocsp) )
{
for (i=0; !url && ksba_name_enum (name, i); i++)
{
char *p = ksba_name_get_uri (name, i);
if (p && (!ascii_strncasecmp (p, "http:", 5)
|| !ascii_strncasecmp (p, "https:", 6)))
url = url_buffer = p;
else
xfree (p);
}
}
ksba_name_release (name);
ksba_free (oid);
}
if (err && gpg_err_code (err) != GPG_ERR_EOF)
{
log_error (_("can't get authorityInfoAccess: %s\n"), gpg_strerror (err));
goto leave;
}
if (!url)
{
if (!opt.ocsp_responder || !*opt.ocsp_responder)
{
log_info (_("no default OCSP responder defined\n"));
err = gpg_error (GPG_ERR_CONFIGURATION);
goto leave;
}
if (!opt.ocsp_signer)
{
log_info (_("no default OCSP signer defined\n"));
err = gpg_error (GPG_ERR_CONFIGURATION);
goto leave;
}
url = opt.ocsp_responder;
default_signer = opt.ocsp_signer;
if (opt.verbose)
log_info (_("using default OCSP responder '%s'\n"), url);
}
else
{
if (opt.verbose)
log_info (_("using OCSP responder '%s'\n"), url);
}
/* Ask the OCSP responder. */
err = gcry_md_open (&md, GCRY_MD_SHA1, 0);
if (err)
{
log_error (_("failed to establish a hashing context for OCSP: %s\n"),
gpg_strerror (err));
goto leave;
}
err = do_ocsp_request (ctrl, ocsp, md, url, cert, issuer_cert);
if (err)
goto leave;
/* We got a useful answer, check that the answer has a valid signature. */
sigval = ksba_ocsp_get_sig_val (ocsp, produced_at);
if (!sigval || !*produced_at)
{
err = gpg_error (GPG_ERR_INV_OBJ);
goto leave;
}
if ( (err = canon_sexp_to_gcry (sigval, &s_sig)) )
goto leave;
xfree (sigval);
sigval = NULL;
err = check_signature (ctrl, ocsp, s_sig, md, default_signer);
if (err)
goto leave;
/* We only support one certificate per request. Check that the
answer matches the right certificate. */
err = ksba_ocsp_get_status (ocsp, cert,
&status, this_update, next_update,
revocation_time, &reason);
if (err)
{
log_error (_("error getting OCSP status for target certificate: %s\n"),
gpg_strerror (err));
goto leave;
}
/* In case the certificate has been revoked, we better invalidate
our cached validation status. */
if (status == KSBA_STATUS_REVOKED)
{
time_t validated_at = 0; /* That is: No cached validation available. */
err = ksba_cert_set_user_data (cert, "validated_at",
&validated_at, sizeof (validated_at));
if (err)
{
log_error ("set_user_data(validated_at) failed: %s\n",
gpg_strerror (err));
err = 0; /* The certificate is anyway revoked, and that is a
more important message than the failure of our
cache. */
}
}
if (opt.verbose)
{
log_info (_("certificate status is: %s (this=%s next=%s)\n"),
status == KSBA_STATUS_GOOD? _("good"):
status == KSBA_STATUS_REVOKED? _("revoked"):
status == KSBA_STATUS_UNKNOWN? _("unknown"):
status == KSBA_STATUS_NONE? _("none"): "?",
this_update, next_update);
if (status == KSBA_STATUS_REVOKED)
log_info (_("certificate has been revoked at: %s due to: %s\n"),
revocation_time,
reason == KSBA_CRLREASON_UNSPECIFIED? "unspecified":
reason == KSBA_CRLREASON_KEY_COMPROMISE? "key compromise":
reason == KSBA_CRLREASON_CA_COMPROMISE? "CA compromise":
reason == KSBA_CRLREASON_AFFILIATION_CHANGED?
"affiliation changed":
reason == KSBA_CRLREASON_SUPERSEDED? "superseeded":
reason == KSBA_CRLREASON_CESSATION_OF_OPERATION?
"cessation of operation":
reason == KSBA_CRLREASON_CERTIFICATE_HOLD?
"certificate on hold":
reason == KSBA_CRLREASON_REMOVE_FROM_CRL?
"removed from CRL":
reason == KSBA_CRLREASON_PRIVILEGE_WITHDRAWN?
"privilege withdrawn":
reason == KSBA_CRLREASON_AA_COMPROMISE? "AA compromise":
reason == KSBA_CRLREASON_OTHER? "other":"?");
}
if (status == KSBA_STATUS_REVOKED)
err = gpg_error (GPG_ERR_CERT_REVOKED);
else if (status == KSBA_STATUS_UNKNOWN)
err = gpg_error (GPG_ERR_NO_DATA);
else if (status != KSBA_STATUS_GOOD)
err = gpg_error (GPG_ERR_GENERAL);
/* Allow for some clock skew. */
gnupg_get_isotime (current_time);
add_seconds_to_isotime (current_time, opt.ocsp_max_clock_skew);
if (strcmp (this_update, current_time) > 0 )
{
log_error (_("OCSP responder returned a status in the future\n"));
log_info ("used now: %s this_update: %s\n", current_time, this_update);
if (!err)
err = gpg_error (GPG_ERR_TIME_CONFLICT);
}
/* Check that THIS_UPDATE is not too far back in the past. */
gnupg_copy_time (tmp_time, this_update);
add_seconds_to_isotime (tmp_time,
opt.ocsp_max_period+opt.ocsp_max_clock_skew);
if (!*tmp_time || strcmp (tmp_time, current_time) < 0 )
{
log_error (_("OCSP responder returned a non-current status\n"));
log_info ("used now: %s this_update: %s\n",
current_time, this_update);
if (!err)
err = gpg_error (GPG_ERR_TIME_CONFLICT);
}
/* Check that we are not beyound NEXT_UPDATE (plus some extra time). */
if (*next_update)
{
gnupg_copy_time (tmp_time, next_update);
add_seconds_to_isotime (tmp_time,
opt.ocsp_current_period+opt.ocsp_max_clock_skew);
if (!*tmp_time && strcmp (tmp_time, current_time) < 0 )
{
log_error (_("OCSP responder returned an too old status\n"));
log_info ("used now: %s next_update: %s\n",
current_time, next_update);
if (!err)
err = gpg_error (GPG_ERR_TIME_CONFLICT);
}
}
leave:
gcry_md_close (md);
gcry_sexp_release (s_sig);
xfree (sigval);
ksba_cert_release (issuer_cert);
ksba_cert_release (cert);
ksba_ocsp_release (ocsp);
xfree (url_buffer);
return err;
}