static void clear_nic_irqs(void)
{
e1000_mmio_beg[E1000_ICR] |= E1000_IMS_RXT0;
// watch out for calling irq_eoi() before clearing rx irq in reg
lapic_eoi();
irq_eoi();
}
static void
msi_disable_source(struct intsrc *isrc, int eoi)
{
if (eoi == PIC_EOI)
lapic_eoi();
}
void keyboard_handler(isr_state_t *state)
{
uint8_t code = inb(0x60);
outb(0x61, inb(0x61));
if (KEYBOARD_CODE_ESCAPED == code) {
keyboard_escaped = true;
} else if (keyboard_escaped) {
switch (code) {
case KEYBOARD_CODE_LEFT:
ui_switch_left();
break;
case KEYBOARD_CODE_RIGHT:
ui_switch_right();
break;
case KEYBOARD_CODE_UP:
ui_scroll_up();
break;
case KEYBOARD_CODE_DOWN:
ui_scroll_down();
break;
}
keyboard_escaped = false;
}
lapic_eoi();
}
static int ioapic_handler(struct int_context *context, struct kernel_dispatch_info *kdi)
{
// kprintf("IO APIC Interrupt Vector %d, IRQ %d\n", context->vector, vector_map[context->vector].irq);
u32 result = 1;
int irq = vector_map[context->vector].irq;
// Disable IRQ
ioapic_disable_irq(irq);
// Dispatch
kdi->dispatch_type = kdisp_interrupt;
kdi->interrupt.irq = irq;
kdi->interrupt.vector = context->vector;
switch (irq) {
case 0:
//result = hal_interrupt_handler_global_timer();
break;
case 1:
result = keyboard_interrupt_handler(context, kdi);
break;
default:
break;
}
// Enable IRQ
lapic_eoi();
ioapic_enable_irq(irq);
return result;
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
uint32_t fault_va;
if(tf->tf_trapno >= 0 && tf->tf_trapno < 255)
{
switch(tf->tf_trapno)
{
case T_PGFLT://page fault
page_fault_handler(tf);
return;
case T_BRKPT:
monitor(tf);
return;
case T_SYSCALL:
//fault_va = rcr2();
//cprintf("[%08x] user fault va %08x ip %08x\n",curenv->env_id, fault_va, tf->tf_eip);
//cprintf("T_SYSCALL\n");
// print_trapframe(tf);
tf->tf_regs.reg_eax = syscall(tf->tf_regs.reg_eax, tf->tf_regs.reg_edx, tf->tf_regs.reg_ecx,tf->tf_regs.reg_ebx, tf->tf_regs.reg_edi, tf->tf_regs.reg_esi);
return;
}
}
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_TIMER) {
lapic_eoi();
sched_yield();
return;
}
// Handle keyboard and serial interrupts.
// LAB 5: Your code here.
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
__isr__
do_rtc (struct intr_frame r)
{
intr_enter ();
struct tm tim;
/* The RTC needs a read to port 0xc,
* otherwise it sends no more interrupts
* x : interrupts enabled in reg b
* x : periodic interrupt has ocurred
* x : alarm interrupt
* x : update-ended alarm
* xxxx : always 0 */
rtc_read (0xc);
hznum++;
if (hznum == RTCHZ) {
hznum = 0;
unixtime++;
/* Once every hour, recalibrate the unix time */
if (unixtime % 3600) {
rtc_get_tm (&tim);
unixtime = mktime (&tim);
}
}
lapic_eoi ();
intr_exit ();
}
static bool lapic_tmr_handler(interrupt_t* state) {
if(_master)
_master();
lapic_eoi();
return true;
}
void ipi_handler(volatile registers_t regs)
{
#if CONFIG_ARCH == TYPE_ARCH_X86_64
assert(((regs.ds&(~0x7)) == 0x10 || (regs.ds&(~0x7)) == 0x20) && ((regs.cs&(~0x7)) == 0x8 || (regs.cs&(~0x7)) == 0x18));
#endif
int previous_interrupt_flag = set_int(0);
add_atomic(&int_count[regs.int_no], 1);
#if CONFIG_SMP
/* delegate to the proper handler, in ipi.c */
switch(regs.int_no) {
case IPI_DEBUG:
case IPI_SHUTDOWN:
case IPI_PANIC:
handle_ipi_cpu_halt(regs);
break;
case IPI_SCHED:
handle_ipi_reschedule(regs);
break;
case IPI_TLB:
handle_ipi_tlb(regs);
break;
case IPI_TLB_ACK:
handle_ipi_tlb_ack(regs);
break;
default:
panic(PANIC_NOSYNC, "invalid interprocessor interrupt number: %d", regs.int_no);
}
#endif
assert(!set_int(0));
set_cpu_interrupt_flag(previous_interrupt_flag); /* assembly code will issue sti */
#if CONFIG_SMP
lapic_eoi();
#endif
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
if (tf ->tf_trapno == IRQ_OFFSET + IRQ_TIMER) {
lapic_eoi();
sched_yield();
return;
}
// Unexpected trap: The user process or the kernel has a bug.
// if (tf->tf_trapno == 14)
// page_fault_handler(tf);
// cprintf("TRAP NO : %d\n", tf->tf_trapno);
int r;
switch (tf->tf_trapno) {
case T_PGFLT :
page_fault_handler(tf);
break;
case T_BRKPT :
monitor(tf);
break;
case T_DEBUG :
monitor(tf);
break;
case T_SYSCALL :
r = syscall(tf->tf_regs.reg_eax, tf->tf_regs.reg_edx, tf->tf_regs.reg_ecx, tf->tf_regs.reg_ebx, tf->tf_regs.reg_edi, tf->tf_regs.reg_esi);
tf->tf_regs.reg_eax = r;
break;
default :
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
}
__isr__
do_lapictim (struct intr_frame r)
{
intr_enter ();
/*kprintf ("tick! %llu ", ticks ());*/
lapic_eoi ();
intr_exit ();
}
__isr__
do_pit (struct intr_frame r)
{
intr_enter ();
jiffies++;
/*if (jiffies % 10 == 0)
kprintf (".");*/
lapic_eoi ();
intr_exit ();
}
static void trap_dispatch(struct frame *tf)
{
switch(tf->tf_trapno)
{
case T_PGFLT:
{
//print_frame(tf);
do_page_fault(tf);
break;
}
case T_GPFLT:
{
panic("GPFLT!\n");
do_exit(curtask);
break;
}
case T_BRKPT :
{
print_frame(tf);
panic("break point handler not implemented!\n");
break;
}
case T_DIVIDE:
{
printk("CPU:%d USER T_DIVIDE\n",get_cpuid());
do_exit(curtask);
}
case T_SYSCALL:
{
tf->tf_regs.reg_eax = syscall_handler(tf);
break;
}
case IRQ_SPURIOUS:
{
printk("CPU:%d Spurious interrupt on irq 7\n",get_cpuid());
print_frame(tf);
return;
}
case IRQ_TIMER :
{
lapic_eoi();
schedule_tick();
break;
}
case IRQ_KBD :
{
irq_eoi();
printk("CPU:%d IRQ_KBD \n",get_cpuid());
inb(0x60);
break;
}
case IRQ_SERIAL :
{
panic("SERIAL handler not implemented!\n");
break;
}
case IRQ_IDE0 :
case IRQ_IDE1 :
{
irq_eoi();
do_hd_interrupt(tf);
break;
}
case IRQ_ERROR :
{
print_frame(tf);
panic("ERROR handler not implemented!\n");
break;
}
default:
{
if (tf->tf_cs == _KERNEL_CS_)
panic("unhandled trap in kernel");
else {
print_frame(tf);
return;
}
break;
}
}
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
//---------------------------------------- Lab3 ------------------------------------------------------------
if (tf->tf_trapno == T_PGFLT) {
//cprintf("pagefault!\n");
page_fault_handler(tf);
return;
}
if (tf->tf_trapno == T_BRKPT) {
//cprintf("brkpt!\n");
monitor(tf);
return;
}
if (tf->tf_trapno == T_DEBUG) {
my_monitor(tf);
return;
}
if (tf->tf_trapno == T_SYSCALL) {
//cprintf("Syscall!\n");
tf->tf_regs.reg_eax = syscall(tf->tf_regs.reg_eax, tf->tf_regs.reg_edx, tf->tf_regs.reg_ecx,
tf->tf_regs.reg_ebx, tf->tf_regs.reg_edi, tf->tf_regs.reg_esi);
if (tf->tf_regs.reg_eax < 0)
panic("syscall failed: %e\n", tf->tf_regs.reg_eax);
return;
}
//---------------------------------------- Lab3 ------------------------------------------------------------
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
//------------ Lab4 ----------------------------------------------------------------------------------------
if (tf->tf_trapno == IRQ_OFFSET + IRQ_TIMER) {
// cprintf("clock interrupt!\n");
lapic_eoi();
sched_yield();
return;
}
//------------ Lab4 ----------------------------------------------------------------------------------------
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
int32_t ret;
switch (tf->tf_trapno){
case T_PGFLT:{ //14
page_fault_handler(tf);
return;
}
case T_BRKPT:{ //3
breakpoint_handler(tf);
return;
}
case T_DEBUG:{
breakpoint_handler(tf);
return;
}
case T_SYSCALL:{
ret = system_call_handler(tf);
tf->tf_regs.reg_eax = ret;
return;
}
case IRQ_OFFSET+IRQ_TIMER:{
lapic_eoi();
time_tick();
sched_yield();
return;
}
case IRQ_OFFSET+IRQ_KBD:{
kbd_intr();
return;
}
case IRQ_OFFSET+IRQ_SERIAL:{
serial_intr();
return;
}
case IRQ_OFFSET+IRQ_E1000:{
e1000_trap_handler();
return;
}
}
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
// Add time tick increment to clock interrupts.
// Be careful! In multiprocessors, clock interrupts are
// triggered on every CPU.
// LAB 6: Your code here.
// Handle keyboard and serial interrupts.
// LAB 5: Your code here.
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
static void
trap_dispatch(struct Trapframe *tf)
{
static int page_to_age = 0;
int page_to_age_first = page_to_age;
int num_page_updates = NPAGEUPDATES_FACTOR*NPAGESFREE_LOW_THRESHOLD;
struct PteChain *pp_refs_chain;
char page_accessed;
// Handle processor exceptions.
// LAB 3: Your code here.
if (tf->tf_trapno == T_PGFLT) {
page_fault_handler(tf);
return;
}
else if (tf->tf_trapno == T_BRKPT) {
monitor(tf); // breakpoint exceptions invoke the kernel monitor
return;
}
else if (tf->tf_trapno == T_SYSCALL) {
tf->tf_regs.reg_eax = syscall(tf->tf_regs.reg_eax, tf->tf_regs.reg_edx, tf->tf_regs.reg_ecx, tf->tf_regs.reg_ebx, tf->tf_regs.reg_edi, tf->tf_regs.reg_esi);
return;
}
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_TIMER) {
lapic_eoi();
// Update the age of some physical pages
// If we fall below the thresholds, update more pages than usual
// This is somewhat arbitrary, we can tweak these numbers
// We also might want to increase the order of magnitude of the number of pages we update per clock tick
// This will require some testing and profiling
// There is also no reason why num_page_updates is based on the threshold values, it can be incremented by its own macros
if (num_free_pages <= NPAGESFREE_LOW_THRESHOLD) {
num_page_updates += NPAGEUPDATES_FACTOR*NPAGESFREE_HIGH_THRESHOLD;
}
if (num_free_pages <= NPAGESFREE_HIGH_THRESHOLD) {
num_page_updates += NPAGEUPDATES_FACTOR*NPAGESFREE_LOW_THRESHOLD;
}
for ( ; num_page_updates >= 0; --num_page_updates) {
// Find the next page that is currently mapped in user space, by finding one with a nonzero pp_ref
while (!pages[page_to_age].pp_ref) {
// If we wrap around to where we started, stop updating page ages
if ((page_to_age=(page_to_age+1)%npages) == page_to_age_first) {
goto end_of_page_age_updates;
}
}
// Iterate through all of the user space PTEs that map to this page
// If any of them have been accessed, increment the age, and then clear the PTE_A bit in all of the PTEs
page_accessed = 0;
for (pp_refs_chain = pages[page_to_age].pp_refs_chain; pp_refs_chain; pp_refs_chain = pp_refs_chain->pc_link) {
if (*pp_refs_chain->pc_pte & PTE_A) {
page_accessed = 1;
pages[page_to_age].age += PAGE_AGE_INCREMENT_ON_ACCESS;
for ( ; pp_refs_chain; pp_refs_chain = pp_refs_chain->pc_link) {
*(pp_refs_chain->pc_pte) &= ~PTE_A;
}
break;
}
}
pages[page_to_age].age = (pages[page_to_age].age > MAX_PAGE_AGE ? MAX_PAGE_AGE : pages[page_to_age].age);
if (!page_accessed) {
if (pages[page_to_age].age >= (uint8_t)PAGE_AGE_DECREMENT_ON_CLOCK) {
pages[page_to_age].age -= (uint8_t)PAGE_AGE_DECREMENT_ON_CLOCK;
}
else {
pages[page_to_age].age = 0;
}
}
// If we wrap around to where we started, stop updating page ages
if ((page_to_age=(page_to_age+1)%npages) == page_to_age_first) {
goto end_of_page_age_updates;
}
}
end_of_page_age_updates:
sched_yield();
}
// Handle keyboard and serial interrupts.
// LAB 5: Your code here.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_KBD) {
lapic_eoi();
kbd_intr();
return;
}
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SERIAL) {
lapic_eoi();
serial_intr();
return;
}
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
// TODO: chky
int r;
switch (tf->tf_trapno) {
case T_PGFLT:
page_fault_handler(tf);
break;
case T_BRKPT:
// TODO: lab3 ex6 challenge
monitor(tf);
break;
case T_SYSCALL:
r = syscall(tf->tf_regs.reg_eax, // syscallno
tf->tf_regs.reg_edx, // a1
tf->tf_regs.reg_ecx, // a2
tf->tf_regs.reg_ebx, // a3
tf->tf_regs.reg_edi, // a4
tf->tf_regs.reg_esi // a5
);
tf->tf_regs.reg_eax = r;
return;
default:
break;
}
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
// TODO: chky
if (tf->tf_trapno == IRQ_OFFSET + IRQ_TIMER) {
lapic_eoi();
sched_yield();
return;
}
// chky end
// Handle keyboard and serial interrupts.
// LAB 5: Your code here.
// TODO: chky
if (tf->tf_trapno == IRQ_OFFSET + IRQ_KBD) {
kbd_intr();
return;
}
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SERIAL) {
serial_intr();
return;
}
// chky end
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
//print_trapframe(tf);
if(tf->tf_trapno == T_PGFLT)
{
page_fault_handler(tf);
}
else if(tf->tf_trapno == T_BRKPT)
{
monitor(tf);
}
else if(tf->tf_trapno == T_SYSCALL)
{
tf->tf_regs.reg_rax = syscall(tf->tf_regs.reg_rax, tf->tf_regs.reg_rdx,
tf->tf_regs.reg_rcx, tf->tf_regs.reg_rbx,
tf->tf_regs.reg_rdi, tf->tf_regs.reg_rsi);
return;
}
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
// Handle keyboard and serial interrupts.
// LAB 5: Your code here.
else if(tf->tf_trapno == (IRQ_OFFSET + IRQ_TIMER))
{
lapic_eoi();
sched_yield();
}
else if(tf->tf_trapno == (IRQ_OFFSET + IRQ_KBD))
{
kbd_intr();
sched_yield();
}
else if(tf->tf_trapno == (IRQ_OFFSET + IRQ_SERIAL))
{
serial_intr();
sched_yield();
}
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
static void
trap_dispatch(struct Trapframe *tf)
{
uint32_t temp;
// Switch on the trap number
switch(tf->tf_trapno) {
case T_DEBUG:
// Unset the step flag in EFLAGS before entering the monitor
tf->tf_eflags &= ~FL_TF;
case T_BRKPT:
// Use breakpoints and debug interrupts as a shortcut to
// start the kernel monitor
monitor(tf);
return;
case T_PGFLT:
// Handle page faults with their own handler.
page_fault_handler(tf);
return;
case T_SYSCALL:
// For system calls, pass arguments to the syscall handler
// and return the result in register EAX.
//
// The number must be stored away, and tf->tf_regs.reg_eax
// set to 0 before the call. This is because some system
// calls such as sys_ipc_recv don't return (due to a call to
// sched_yield()), but expect to return 0 for the return value.
// If reg_eax is not cleared, then whatever is in it might be
// mistaken for the return value. -_-
temp = tf->tf_regs.reg_eax;
tf->tf_regs.reg_eax = 0;
tf->tf_regs.reg_eax = syscall(temp,
tf->tf_regs.reg_edx,
tf->tf_regs.reg_ecx,
tf->tf_regs.reg_ebx,
tf->tf_regs.reg_edi,
tf->tf_regs.reg_esi);
return;
}
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
if(tf->tf_trapno == IRQ_OFFSET+IRQ_TIMER) {
// Timer interrupts should cause the scheduler to be run
lapic_eoi();
sched_yield();
}
// Handle keyboard and serial interrupts.
if(tf->tf_trapno == IRQ_OFFSET+IRQ_KBD) {
// kern/console.c function that handles the keyboard
kbd_intr();
return;
}
if(tf->tf_trapno == IRQ_OFFSET+IRQ_SERIAL) {
// kern/console.c function that handles serial input
serial_intr();
return;
}
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
static void
msi_eoi_source(struct intsrc *isrc)
{
lapic_eoi();
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
//<<<<<<< HEAD
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
//cprintf("entering trap dispathc\n");
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
//<<<<<<< HEAD
// Add time tick increment to clock interrupts.
// Be careful! In multiprocessors, clock interrupts are
// triggered on every CPU.
// LAB 6: Your code here.
//=======
//<<<<<<< HEAD
//>>>>>>> lab5
// Handle keyboard and serial interrupts.
// LAB 5: Your code here.
if(tf->tf_trapno==IRQ_OFFSET+IRQ_KBD)
{
//cprintf("IRQ_OFFSET+IRQ_KBD trap\n");
kbd_intr();
return;
}
if(tf->tf_trapno==IRQ_OFFSET+IRQ_SERIAL)
{
//cprintf("IRQ_OFFSET+IRQ_serial trap\n");
serial_intr();
return;
}
//=======
//=======
if(tf->tf_trapno==T_PGFLT)
{
// cprintf("pagefault handler\n");
page_fault_handler(tf);
return;
} else if((tf->tf_trapno==T_GPFLT)) {
print_trapframe(tf);
return;
}
else if(tf->tf_trapno==T_BRKPT)
{
// cprintf("T_BRKPT");
monitor(tf);
return;
}
else if(tf->tf_trapno==T_SYSCALL)
{// cprintf("calling syscal'\n");
tf->tf_regs.reg_rax =syscall(tf->tf_regs.reg_rax,tf->tf_regs.reg_rdx,tf->tf_regs.reg_rcx,tf->tf_regs.reg_rbx,tf->tf_regs.reg_rdi,tf->tf_regs.reg_rsi);
// cprintf("syscall exit\n");
return;
}
//>>>>>>> lab3
//>>>>>>> lab4
// Unexpected trap: The user process or the kernel has a bug.
else if(tf->tf_trapno == IRQ_OFFSET + IRQ_TIMER)
{
lapic_eoi();
time_tick();
sched_yield();
}
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
cprintf("destroy env\n");
env_destroy(curenv);
return;
}
// cprintf("exiting trap_dispatch\n");
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
if (tf->tf_trapno == T_BRKPT) {
print_trapframe(tf);
// cprintf("Breakpoint!\n");
while (1)
monitor(NULL);
} else if (tf->tf_trapno == T_PGFLT) {
page_fault_handler(tf);
return;
} else if (tf->tf_trapno == T_SYSCALL) {
uint32_t syscallno;
uint32_t a1, a2, a3, a4, a5;
syscallno = tf->tf_regs.reg_eax;
a1 = tf->tf_regs.reg_edx;
a2 = tf->tf_regs.reg_ecx;
a3 = tf->tf_regs.reg_ebx;
a4 = tf->tf_regs.reg_edi;
a5 = tf->tf_regs.reg_esi;
int32_t ret = syscall(syscallno, a1, a2, a3, a4, a5);
tf->tf_regs.reg_eax = ret;
return;
}
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_TIMER) {
time_tick();
lapic_eoi(); /* what's that? */
sched_yield();
}
// Handle keyboard and serial interrupts.
// LAB 5: Your code here.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_KBD) {
kbd_intr();
return;
}
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SERIAL) {
serial_intr();
return;
}
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
/* this should NEVER enter from an interrupt handler,
* and only from kernel code in the one case of calling
* sys_setup() */
void entry_syscall_handler(volatile registers_t regs)
{
/* don't need to save the flag here, since it will always be true */
#if CONFIG_ARCH == TYPE_ARCH_X86_64
assert(regs.int_no == 0x80 && ((regs.ds&(~0x7)) == 0x10 || (regs.ds&(~0x7)) == 0x20) && ((regs.cs&(~0x7)) == 0x8 || (regs.cs&(~0x7)) == 0x18));
#endif
set_int(0);
add_atomic(&int_count[0x80], 1);
if(current_task->flags & TF_IN_INT)
panic(0, "attempted to enter syscall while handling an interrupt");
/* set the interrupt handling flag... */
raise_flag(TF_IN_INT);
#if CONFIG_ARCH == TYPE_ARCH_X86_64
if(regs.rax == 128) {
#elif CONFIG_ARCH == TYPE_ARCH_X86
if(regs.eax == 128) {
#endif
/* the injection code at the end of the signal handler calls
* a syscall with eax = 128. So here we handle returning from
* a signal handler. First, copy back the old registers, and
* reset flags and signal stuff */
memcpy((void *)®s, (void *)¤t_task->reg_b, sizeof(registers_t));
current_task->sig_mask = current_task->old_mask;
current_task->cursig=0;
lower_flag(TF_INSIG);
lower_flag(TF_JUMPIN);
} else {
assert(!current_task->sysregs && !current_task->regs);
/* otherwise, this is a normal system call. Save the regs for modification
* for signals and exec */
current_task->regs = ®s;
current_task->sysregs = ®s;
syscall_handler(®s);
assert(!get_cpu_interrupt_flag());
/* handle stage2's here...*/
if(maybe_handle_stage_2 || !current_task->syscall_count) {
mutex_acquire(&s2_lock);
for(int i=0;i<MAX_INTERRUPTS;i++)
{
if(stage2_count[i])
{
sub_atomic(&stage2_count[i], 1);
for(int j=0;j<MAX_HANDLERS;j++) {
if(interrupt_handlers[i][j][1]) {
(interrupt_handlers[i][j][1])(®s);
}
}
}
}
mutex_release(&s2_lock);
}
assert(!get_cpu_interrupt_flag());
}
assert(!set_int(0));
current_task->sysregs=0;
current_task->regs=0;
/* we don't need worry about this being wrong, since we'll always be returning to
* user-space code */
set_cpu_interrupt_flag(1);
/* we're never returning to an interrupt, so we can
* safely reset this flag */
lower_flag(TF_IN_INT);
#if CONFIG_SMP
lapic_eoi();
#endif
}
/* This gets called from our ASM interrupt handler stub. */
void isr_handler(volatile registers_t regs)
{
#if CONFIG_ARCH == TYPE_ARCH_X86_64
assert(((regs.ds&(~0x7)) == 0x10 || (regs.ds&(~0x7)) == 0x20) && ((regs.cs&(~0x7)) == 0x8 || (regs.cs&(~0x7)) == 0x18));
#endif
/* this is explained in the IRQ handler */
int previous_interrupt_flag = set_int(0);
add_atomic(&int_count[regs.int_no], 1);
/* check if we're interrupting kernel code, and set the interrupt
* handling flag */
char already_in_interrupt = 0;
if(current_task->flags & TF_IN_INT)
already_in_interrupt = 1;
raise_flag(TF_IN_INT);
/* run the stage1 handlers, and see if we need any stage2s. And if we
* don't handle it at all, we need to actually fault to handle the error
* and kill the process or kernel panic */
char called=0;
char need_second_stage = 0;
for(int i=0;i<MAX_HANDLERS;i++)
{
if(interrupt_handlers[regs.int_no][i][0] || interrupt_handlers[regs.int_no][i][1])
{
/* we're able to handle the error! */
called = 1;
if(interrupt_handlers[regs.int_no][i][0])
(interrupt_handlers[regs.int_no][i][0])(®s);
if(interrupt_handlers[regs.int_no][i][1])
need_second_stage = 1;
}
}
if(need_second_stage) {
/* we need to run a second stage handler. Indicate that here... */
add_atomic(&stage2_count[regs.int_no], 1);
maybe_handle_stage_2 = 1;
}
/* clean up... Also, we don't handle stage 2 in ISR handling, since this
can occur from within a stage2 handler */
assert(!set_int(0));
/* if it went unhandled, kill the process or panic */
if(!called)
faulted(regs.int_no, !already_in_interrupt, regs.eip);
/* restore previous interrupt state */
set_cpu_interrupt_flag(previous_interrupt_flag);
if(!already_in_interrupt)
lower_flag(TF_IN_INT);
/* send out the EOI... */
#if CONFIG_SMP
lapic_eoi();
#endif
}
void irq_handler(volatile registers_t regs)
{
#if CONFIG_ARCH == TYPE_ARCH_X86_64
assert(((regs.ds&(~0x7)) == 0x10 || (regs.ds&(~0x7)) == 0x20) && ((regs.cs&(~0x7)) == 0x8 || (regs.cs&(~0x7)) == 0x18));
#endif
/* ok, so the assembly entry function clears interrupts in the cpu,
* but the kernel doesn't know that yet. So we clear the interrupt
* flag in the cpu structure as part of the normal set_int call, but
* it returns the interrupts-enabled flag from BEFORE the interrupt
* was recieved! F****n' brilliant! Back up that flag, so we can
* properly restore the flag later. */
int previous_interrupt_flag = set_int(0);
add_atomic(&int_count[regs.int_no], 1);
/* save the registers so we can screw with iret later if we need to */
char clear_regs=0;
if(current_task && !current_task->regs) {
/* of course, if we are already inside an interrupt, we shouldn't
* overwrite those. Also, we remember if we've saved this set of registers
* for later use */
clear_regs=1;
current_task->regs = ®s;
}
/* check if we're interrupting kernel code */
char already_in_interrupt = 0;
if(current_task->flags & TF_IN_INT)
already_in_interrupt = 1;
/* ...and set the flag so we know we're in an interrupt */
raise_flag(TF_IN_INT);
/* now, run through the stage1 handlers, and see if we need any
* stage2 handlers to run later */
char need_second_stage = 0;
for(int i=0;i<MAX_HANDLERS;i++)
{
if(interrupt_handlers[regs.int_no][i][0])
(interrupt_handlers[regs.int_no][i][0])(®s);
if(interrupt_handlers[regs.int_no][i][1])
need_second_stage = 1;
}
/* if we need a second stage handler, increment the count for this
* interrupt number, and indicate that handlers should check for
* second stage handlers. */
if(need_second_stage) {
add_atomic(&stage2_count[regs.int_no], 1);
maybe_handle_stage_2 = 1;
}
assert(!get_cpu_interrupt_flag());
/* ok, now are we allowed to handle stage2's right here? */
if(!already_in_interrupt && (maybe_handle_stage_2||need_second_stage))
{
maybe_handle_stage_2 = 0;
/* handle the stage2 handlers. NOTE: this may change to only
* handling one interrupt, and/or one function. For now, this works. */
mutex_acquire(&s2_lock);
for(int i=0;i<MAX_INTERRUPTS;i++)
{
if(stage2_count[i])
{
/* decrease the count for this interrupt number, and loop through
* all the second stage handlers and run them */
sub_atomic(&stage2_count[i], 1);
for(int j=0;j<MAX_HANDLERS;j++) {
if(interrupt_handlers[i][j][1]) {
(interrupt_handlers[i][j][1])(®s);
}
}
}
}
mutex_release(&s2_lock);
assert(!get_cpu_interrupt_flag());
}
/* ok, now lets clean up */
assert(!set_int(0));
/* clear the registers if we saved the ones from this interrupt */
if(current_task && clear_regs)
current_task->regs=0;
/* restore the flag in the cpu struct. The assembly routine will
* call iret, which will also restore the EFLAG state to what
* it was before, including the interrupts-enabled bit in eflags */
set_cpu_interrupt_flag(previous_interrupt_flag);
/* and clear the state flag if this is going to return to user-space code */
if(!already_in_interrupt)
lower_flag(TF_IN_INT);
/* and send out the EOIs */
if(interrupt_controller == IOINT_PIC) ack_pic(regs.int_no);
#if CONFIG_SMP
lapic_eoi();
#endif
}
void
trap(struct trapframe *tf)
{
int v = tf->trapno;
struct proc *cp = curproc[cpu()];
if(v == T_SYSCALL){
if(cp->killed)
proc_exit();
cp->tf = tf;
syscall();
if(cp->killed)
proc_exit();
return;
}
// Increment nlock to make sure interrupts stay off
// during interrupt handler. Decrement before returning.
cpus[cpu()].nlock++;
switch(v){
case IRQ_OFFSET + IRQ_TIMER:
lapic_timerintr();
cpus[cpu()].nlock--;
if(cp){
// Force process exit if it has been killed and is in user space.
// (If it is still executing in the kernel, let it keep running
// until it gets to the regular system call return.)
if((tf->cs&3) == 3 && cp->killed)
proc_exit();
// Force process to give up CPU and let others run.
if(cp->state == RUNNING)
yield();
}
return;
case IRQ_OFFSET + IRQ_IDE:
ide_intr();
lapic_eoi();
break;
case IRQ_OFFSET + IRQ_KBD:
kbd_intr();
lapic_eoi();
break;
case IRQ_OFFSET + IRQ_SPURIOUS:
cprintf("spurious interrupt from cpu %d eip %x\n", cpu(), tf->eip);
break;
default:
if(curproc[cpu()]) {
// Assume process divided by zero or dereferenced null, etc.
cprintf("pid %d: unhandled trap %d on cpu %d eip %x -- kill proc\n",
curproc[cpu()]->pid, v, cpu(), tf->eip);
proc_exit();
}
// Otherwise it's our mistake.
cprintf("unexpected trap %d from cpu %d eip %x\n", v, cpu(), tf->eip);
panic("trap");
}
cpus[cpu()].nlock--;
}
static void
trap_dispatch(struct Trapframe *tf)
{
// Handle processor exceptions.
// LAB 3: Your code here.
switch(tf->tf_trapno) {
case T_PGFLT:
page_fault_handler(tf);
return;
case T_BRKPT:
case T_DEBUG:
monitor(tf);
return;
case T_SYSCALL:
tf->tf_regs.reg_eax = syscall(tf->tf_regs.reg_eax, // syscall #
tf->tf_regs.reg_edx, // arg1
tf->tf_regs.reg_ecx, // arg2
tf->tf_regs.reg_ebx, // arg3
tf->tf_regs.reg_edi, // arg4
tf->tf_regs.reg_esi);// arg5
return;
}
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// Add time tick increment to clock interrupts.
// Be careful! In multiprocessors, clock interrupts are
// triggered on every CPU.
// LAB 4: Your code here.
// LAB 6: Your code here.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_TIMER) {
time_tick();
lapic_eoi();
sched_yield();
return;
}
// Handle keyboard and serial interrupts.
// LAB 7: Your code here.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SERIAL) {
serial_intr();
return;
}
if (tf->tf_trapno == IRQ_OFFSET + IRQ_KBD) {
kbd_intr();
return;
}
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
static void
trap_dispatch(struct Trapframe *tf)
{
int32_t res;
// Handle processor exceptions.
// LAB 3: Your code here.
// Handle spurious interrupts
// The hardware sometimes raises these because of noise on the
// IRQ line or other reasons. We don't care.
if (tf->tf_trapno == IRQ_OFFSET + IRQ_SPURIOUS) {
cprintf("Spurious interrupt on irq 7\n");
print_trapframe(tf);
return;
}
// Handle clock interrupts. Don't forget to acknowledge the
// interrupt using lapic_eoi() before calling the scheduler!
// LAB 4: Your code here.
// Add time tick increment to clock interrupts.
// Be careful! In multiprocessors, clock interrupts are
// triggered on every CPU.
// LAB 6: Your code here.
// Handle keyboard and serial interrupts.
// LAB 5: Your code here.
//if(tf->tf_trapno == 48 && tf->tf_regs.reg_eax==7)
//{
//cprintf("trap no = %d at cpu %d env %x\n",tf->tf_trapno,cpunum(),curenv->env_id);
//print_trapframe(tf);
//}
switch(tf->tf_trapno)
{
case IRQ_OFFSET + IRQ_TIMER:
//cprintf("clock interrupt on irq 7 on cpu %d\n",cpunum());
//print_trapframe(tf);
//cprintf(" eip 0x%08x\n", tf->tf_eip);
//cprintf(" esp 0x%08x\n", tf->tf_esp);
lapic_eoi();
time_tick();
sched_yield();
break;
case IRQ_OFFSET + IRQ_SERIAL:
serial_intr(); break;
case IRQ_OFFSET + IRQ_KBD:
kbd_intr(); break;
case T_DIVIDE: tf->tf_regs.reg_ecx = 1; break;
case T_PGFLT: page_fault_handler(tf); goto err;
case T_SYSCALL:
res = syscall(tf->tf_regs.reg_eax,tf->tf_regs.reg_edx,tf->tf_regs.reg_ecx,tf->tf_regs.reg_ebx,tf->tf_regs.reg_edi,tf->tf_regs.reg_esi);
tf->tf_regs.reg_eax = res; break;
case T_BRKPT:print_trapframe(tf);monitor(NULL);break;
default: goto err;
}
return;
err:
// Unexpected trap: The user process or the kernel has a bug.
print_trapframe(tf);
if (tf->tf_cs == GD_KT)
panic("unhandled trap in kernel");
else {
env_destroy(curenv);
return;
}
}
void
trap(struct trapframe *tf)
{
if(tf->trapno == T_SYSCALL){
if(cp->killed)
exit();
cp->tf = tf;
syscall();
if(cp->killed)
exit();
return;
}
switch(tf->trapno){
case IRQ_OFFSET + IRQ_TIMER:
if(cpu() == 0){
acquire(&tickslock);
ticks++;
wakeup(&ticks);
release(&tickslock);
}
lapic_eoi();
break;
case IRQ_OFFSET + IRQ_IDE:
ide_intr();
lapic_eoi();
break;
case IRQ_OFFSET + IRQ_KBD:
kbd_intr();
lapic_eoi();
break;
case IRQ_OFFSET + IRQ_SPURIOUS:
cprintf("cpu%d: spurious interrupt at %x:%x\n",
cpu(), tf->cs, tf->eip);
lapic_eoi();
break;
default:
if(cp == 0 || (tf->cs&3) == 0){
// In kernel, it must be our mistake.
cprintf("unexpected trap %d from cpu %d eip %x\n",
tf->trapno, cpu(), tf->eip);
panic("trap");
}
// In user space, assume process misbehaved.
cprintf("pid %d %s: trap %d err %d on cpu %d eip %x -- kill proc\n",
cp->pid, cp->name, tf->trapno, tf->err, cpu(), tf->eip);
cp->killed = 1;
}
// Force process exit if it has been killed and is in user space.
// (If it is still executing in the kernel, let it keep running
// until it gets to the regular system call return.)
if(cp && cp->killed && (tf->cs&3) == DPL_USER)
exit();
// Force process to give up CPU on clock tick.
// If interrupts were on while locks held, would need to check nlock.
if(cp && cp->state == RUNNING && tf->trapno == IRQ_OFFSET+IRQ_TIMER)
yield();
}
void
trap(struct trapframe *tf)
{
uint cr2;
//print_trapframe(tf); procdump(); //chy for debug
if (cp!=NULL)
dbmsg("trap frame from %x %x, cp name %s\n",tf->eip, tf->trapno,cp->name);
if(tf->trapno == T_SYSCALL){
if(cp->killed)
exit();
cp->tf = tf;
syscall();
if(cp->killed)
exit();
return;
}
switch(tf->trapno){
cprintf("interrupt %x, trap frame : %x\n",tf->trapno, (uint)tf);
case IRQ_OFFSET + IRQ_TIMER:
// if(cpu() == 0){
acquire(&tickslock);
ticks++;
wakeup(&ticks);
release(&tickslock);
// }
lapic_eoi();
break;
case IRQ_OFFSET + IRQ_IDE:
ide_intr();
lapic_eoi();
break;
case IRQ_OFFSET + IRQ_KBD:
kbd_intr();
lapic_eoi();
break;
case IRQ_OFFSET + IRQ_SPURIOUS:
cprintf("cpu%d: spurious interrupt at %x:%x\n",
cpu(), tf->cs, tf->eip);
lapic_eoi();
break;
case T_PGFLT:
cprintf("page fault!\n");
//cprintf("current process uses %d pages.\n", cp->sz/PAGE);
cr2=rcr2();
if(handle_pgfault(cr2)<0){
cprintf("cannot handle page fault! Virtual addr: %x, eip: %x\n", cr2, tf->eip);
}else{
cprintf("page fault handled successfully! Virtual addr: %x, eip: %x\n", cr2, tf->eip);
}
//cprintf("current process uses %d pages.\n", cp->sz/PAGE);
break;
default:
if(cp == 0 || (tf->cs&3) == 0){
// In kernel, it must be our mistake.
cprintf("unexpected trap %d from cpu %d eip %x esp %x cr2 %x, pid %d %s \n",
tf->trapno, cpu(), tf->eip, tf->esp, rcr2(),cp->pid, cp->name);
panic("trap");
}
// In user space, assume process misbehaved.
cprintf("pid %d %s: trap %d err %d on cpu %d eip %x cr2 %x -- kill proc\n",
cp->pid, cp->name, tf->trapno, tf->err, cpu(), tf->eip, rcr2());
cp->killed = 1;
}
// Force process exit if it has been killed and is in user space.
// (If it is still executing in the kernel, let it keep running
// until it gets to the regular system call return.)
if(cp && cp->killed && (tf->cs&3) == DPL_USER)
exit();
// Force process to give up CPU on clock tick.
// If interrupts were on while locks held, would need to check nlock.
if(cp && cp->state == RUNNING && tf->trapno == IRQ_OFFSET+IRQ_TIMER){
#ifdef LOAD_BALANCE_ON
if(cp == idleproc[cpu()]){
struct rq* rq = theCpu.rq;
rq->sched_class->load_balance(rq);
}
#endif
proc_tick(theCpu.rq, cp);
}
}
