static void default_layer_state_set(uint32_t state)
{
debug("default_layer_state: ");
default_layer_debug(); debug(" to ");
default_layer_state = state;
default_layer_debug(); debug("\n");
clear_keyboard_but_mods(); // To avoid stuck keys
layer_state_set(state);
}
bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
keycode = keycode & 0xFF;
}
switch (keycode) {
#ifdef RGBLIGHT_TWINKLE
case KC_A ... KC_SLASH:
case KC_F1 ... KC_F12:
case KC_INSERT ... KC_UP:
case KC_KP_SLASH ... KC_KP_DOT:
case KC_F13 ... KC_F24:
case KC_AUDIO_MUTE ... KC_MEDIA_REWIND:
if (record->event.pressed) { start_rgb_light(); }
return true; break;
#endif // RGBLIGHT_TWINKLE
case KC_RGB_T: // This allows me to use underglow as layer indication, or as normal
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
if (record->event.pressed) {
userspace_config.rgb_layer_change ^= 1;
xprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
eeconfig_update_user(userspace_config.raw);
if (userspace_config.rgb_layer_change) {
layer_state_set(layer_state); // This is needed to immediately set the layer color (looks better)
}
}
#endif // RGBLIGHT_ENABLE
return false; break;
#ifdef RGBLIGHT_ENABLE
case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // quantum_keycodes.h L400 for definitions
if (record->event.pressed) { //This disables layer indication, as it's assumed that if you're changing this ... you want that disabled
if (userspace_config.rgb_layer_change) {
userspace_config.rgb_layer_change = false;
xprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
eeconfig_update_user(userspace_config.raw);
}
}
return true; break;
#endif // RGBLIGHT_ENABLE
}
return true;
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
// Activate the appropriate magic layer:
// User is holding AltGr+Shift => _SHIFTMAGIC
// User is holding AltGr => _MAGIC
// Not holding AltGr => None
// We do this the efficient way, by grabbing the non-magic bits from the current layer bitmap,
// setting the appropriate magic or shiftmagic bit, and doing an absolute layer set. (Layer
// sets are nontrivial, so we don't want to do extras!)
// We track shift and AltGr state on our own, because this function is called before get_mods is
// updated!
static bool shifted = false;
static bool magic = false;
if (keycode == KC_LSHIFT || keycode == KC_RSHIFT) {
shifted = record->event.pressed;
} else if (keycode == MAGIC) {
magic = record->event.pressed;
} else if (keycode == RESET) {
// Safe reset: Only actually let this keycode through if shift is held as well. Since there's no
// right-shift in the function layer, this means that reset is Fn+LShift+Esc, something you're
// not likely to hit by accident. (Especially since AltGr+Esc is backtick!)
return (record->event.pressed && shifted);
}
// Update the layer.
uint32_t new_layer_state = layer_state & LAYER_MASK;
if (magic) {
new_layer_state |= (shifted ? SHIFTMAGIC_LAYER : MAGIC_LAYER);
}
if (layer_state != new_layer_state) {
layer_state_set(new_layer_state);
}
return true;
}
bool process_record_quantum(keyrecord_t *record) {
/* This gets the keycode from the key pressed */
keypos_t key = record->event.key;
uint16_t keycode;
#if !defined(NO_ACTION_LAYER) && !defined(STRICT_LAYER_RELEASE)
/* TODO: Use store_or_get_action() or a similar function. */
if (!disable_action_cache) {
uint8_t layer;
if (record->event.pressed) {
layer = layer_switch_get_layer(key);
update_source_layers_cache(key, layer);
} else {
layer = read_source_layers_cache(key);
}
keycode = keymap_key_to_keycode(layer, key);
} else
#endif
keycode = keymap_key_to_keycode(layer_switch_get_layer(key), key);
// This is how you use actions here
// if (keycode == KC_LEAD) {
// action_t action;
// action.code = ACTION_DEFAULT_LAYER_SET(0);
// process_action(record, action);
// return false;
// }
#ifdef TAP_DANCE_ENABLE
preprocess_tap_dance(keycode, record);
#endif
if (!(
#if defined(KEY_LOCK_ENABLE)
// Must run first to be able to mask key_up events.
process_key_lock(&keycode, record) &&
#endif
#if defined(AUDIO_ENABLE) && defined(AUDIO_CLICKY)
process_clicky(keycode, record) &&
#endif //AUDIO_CLICKY
process_record_kb(keycode, record) &&
#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYPRESSES)
process_rgb_matrix(keycode, record) &&
#endif
#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
process_midi(keycode, record) &&
#endif
#ifdef AUDIO_ENABLE
process_audio(keycode, record) &&
#endif
#ifdef STENO_ENABLE
process_steno(keycode, record) &&
#endif
#if ( defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))) && !defined(NO_MUSIC_MODE)
process_music(keycode, record) &&
#endif
#ifdef TAP_DANCE_ENABLE
process_tap_dance(keycode, record) &&
#endif
#ifdef LEADER_ENABLE
process_leader(keycode, record) &&
#endif
#ifdef COMBO_ENABLE
process_combo(keycode, record) &&
#endif
#ifdef UNICODE_ENABLE
process_unicode(keycode, record) &&
#endif
#ifdef UCIS_ENABLE
process_ucis(keycode, record) &&
#endif
#ifdef PRINTING_ENABLE
process_printer(keycode, record) &&
#endif
#ifdef AUTO_SHIFT_ENABLE
process_auto_shift(keycode, record) &&
#endif
#ifdef UNICODEMAP_ENABLE
process_unicode_map(keycode, record) &&
#endif
#ifdef TERMINAL_ENABLE
process_terminal(keycode, record) &&
#endif
true)) {
return false;
}
// Shift / paren setup
switch(keycode) {
case RESET:
if (record->event.pressed) {
reset_keyboard();
}
return false;
case DEBUG:
if (record->event.pressed) {
debug_enable = true;
print("DEBUG: enabled.\n");
}
return false;
#ifdef FAUXCLICKY_ENABLE
case FC_TOG:
if (record->event.pressed) {
FAUXCLICKY_TOGGLE;
}
return false;
case FC_ON:
if (record->event.pressed) {
FAUXCLICKY_ON;
}
return false;
case FC_OFF:
if (record->event.pressed) {
FAUXCLICKY_OFF;
}
return false;
#endif
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
case RGB_TOG:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_toggle();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_MODE_FORWARD:
if (record->event.pressed) {
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT));
if(shifted) {
rgblight_step_reverse();
}
else {
rgblight_step();
}
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_MODE_REVERSE:
if (record->event.pressed) {
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT));
if(shifted) {
rgblight_step();
}
else {
rgblight_step_reverse();
}
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_HUI:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_increase_hue();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_HUD:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_decrease_hue();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_SAI:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_increase_sat();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_SAD:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_decrease_sat();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_VAI:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_increase_val();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_VAD:
// Split keyboards need to trigger on key-up for edge-case issue
#ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
#else
if (!record->event.pressed) {
#endif
rgblight_decrease_val();
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_SPI:
if (record->event.pressed) {
rgblight_increase_speed();
}
return false;
case RGB_SPD:
if (record->event.pressed) {
rgblight_decrease_speed();
}
return false;
case RGB_MODE_PLAIN:
if (record->event.pressed) {
rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
#ifdef SPLIT_KEYBOARD
RGB_DIRTY = true;
#endif
}
return false;
case RGB_MODE_BREATHE:
#ifdef RGBLIGHT_EFFECT_BREATHING
if (record->event.pressed) {
if ((RGBLIGHT_MODE_BREATHING <= rgblight_get_mode()) &&
(rgblight_get_mode() < RGBLIGHT_MODE_BREATHING_end)) {
rgblight_step();
} else {
rgblight_mode(RGBLIGHT_MODE_BREATHING);
}
}
#endif
return false;
case RGB_MODE_RAINBOW:
#ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD
if (record->event.pressed) {
if ((RGBLIGHT_MODE_RAINBOW_MOOD <= rgblight_get_mode()) &&
(rgblight_get_mode() < RGBLIGHT_MODE_RAINBOW_MOOD_end)) {
rgblight_step();
} else {
rgblight_mode(RGBLIGHT_MODE_RAINBOW_MOOD);
}
}
#endif
return false;
case RGB_MODE_SWIRL:
#ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL
if (record->event.pressed) {
if ((RGBLIGHT_MODE_RAINBOW_SWIRL <= rgblight_get_mode()) &&
(rgblight_get_mode() < RGBLIGHT_MODE_RAINBOW_SWIRL_end)) {
rgblight_step();
} else {
rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL);
}
}
#endif
return false;
case RGB_MODE_SNAKE:
#ifdef RGBLIGHT_EFFECT_SNAKE
if (record->event.pressed) {
if ((RGBLIGHT_MODE_SNAKE <= rgblight_get_mode()) &&
(rgblight_get_mode() < RGBLIGHT_MODE_SNAKE_end)) {
rgblight_step();
} else {
rgblight_mode(RGBLIGHT_MODE_SNAKE);
}
}
#endif
return false;
case RGB_MODE_KNIGHT:
#ifdef RGBLIGHT_EFFECT_KNIGHT
if (record->event.pressed) {
if ((RGBLIGHT_MODE_KNIGHT <= rgblight_get_mode()) &&
(rgblight_get_mode() < RGBLIGHT_MODE_KNIGHT_end)) {
rgblight_step();
} else {
rgblight_mode(RGBLIGHT_MODE_KNIGHT);
}
}
#endif
return false;
case RGB_MODE_XMAS:
#ifdef RGBLIGHT_EFFECT_CHRISTMAS
if (record->event.pressed) {
rgblight_mode(RGBLIGHT_MODE_CHRISTMAS);
}
#endif
return false;
case RGB_MODE_GRADIENT:
#ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT
if (record->event.pressed) {
if ((RGBLIGHT_MODE_STATIC_GRADIENT <= rgblight_get_mode()) &&
(rgblight_get_mode() < RGBLIGHT_MODE_STATIC_GRADIENT_end)) {
rgblight_step();
} else {
rgblight_mode(RGBLIGHT_MODE_STATIC_GRADIENT);
}
}
#endif
return false;
case RGB_MODE_RGBTEST:
#ifdef RGBLIGHT_EFFECT_RGB_TEST
if (record->event.pressed) {
rgblight_mode(RGBLIGHT_MODE_RGB_TEST);
}
#endif
return false;
#endif // defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
#ifdef PROTOCOL_LUFA
case OUT_AUTO:
if (record->event.pressed) {
set_output(OUTPUT_AUTO);
}
return false;
case OUT_USB:
if (record->event.pressed) {
set_output(OUTPUT_USB);
}
return false;
#ifdef BLUETOOTH_ENABLE
case OUT_BT:
if (record->event.pressed) {
set_output(OUTPUT_BLUETOOTH);
}
return false;
#endif
#endif
case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_NKRO:
if (record->event.pressed) {
// MAGIC actions (BOOTMAGIC without the boot)
if (!eeconfig_is_enabled()) {
eeconfig_init();
}
/* keymap config */
keymap_config.raw = eeconfig_read_keymap();
switch (keycode)
{
case MAGIC_SWAP_CONTROL_CAPSLOCK:
keymap_config.swap_control_capslock = true;
break;
case MAGIC_CAPSLOCK_TO_CONTROL:
keymap_config.capslock_to_control = true;
break;
case MAGIC_SWAP_LALT_LGUI:
keymap_config.swap_lalt_lgui = true;
break;
case MAGIC_SWAP_RALT_RGUI:
keymap_config.swap_ralt_rgui = true;
break;
case MAGIC_NO_GUI:
keymap_config.no_gui = true;
break;
case MAGIC_SWAP_GRAVE_ESC:
keymap_config.swap_grave_esc = true;
break;
case MAGIC_SWAP_BACKSLASH_BACKSPACE:
keymap_config.swap_backslash_backspace = true;
break;
case MAGIC_HOST_NKRO:
keymap_config.nkro = true;
break;
case MAGIC_SWAP_ALT_GUI:
keymap_config.swap_lalt_lgui = true;
keymap_config.swap_ralt_rgui = true;
#ifdef AUDIO_ENABLE
PLAY_SONG(ag_swap_song);
#endif
break;
case MAGIC_UNSWAP_CONTROL_CAPSLOCK:
keymap_config.swap_control_capslock = false;
break;
case MAGIC_UNCAPSLOCK_TO_CONTROL:
keymap_config.capslock_to_control = false;
break;
case MAGIC_UNSWAP_LALT_LGUI:
keymap_config.swap_lalt_lgui = false;
break;
case MAGIC_UNSWAP_RALT_RGUI:
keymap_config.swap_ralt_rgui = false;
break;
case MAGIC_UNNO_GUI:
keymap_config.no_gui = false;
break;
case MAGIC_UNSWAP_GRAVE_ESC:
keymap_config.swap_grave_esc = false;
break;
case MAGIC_UNSWAP_BACKSLASH_BACKSPACE:
keymap_config.swap_backslash_backspace = false;
break;
case MAGIC_UNHOST_NKRO:
keymap_config.nkro = false;
break;
case MAGIC_UNSWAP_ALT_GUI:
keymap_config.swap_lalt_lgui = false;
keymap_config.swap_ralt_rgui = false;
#ifdef AUDIO_ENABLE
PLAY_SONG(ag_norm_song);
#endif
break;
case MAGIC_TOGGLE_ALT_GUI:
keymap_config.swap_lalt_lgui = !keymap_config.swap_lalt_lgui;
keymap_config.swap_ralt_rgui = !keymap_config.swap_ralt_rgui;
#ifdef AUDIO_ENABLE
if (keymap_config.swap_ralt_rgui) {
PLAY_SONG(ag_swap_song);
} else {
PLAY_SONG(ag_norm_song);
}
#endif
break;
case MAGIC_TOGGLE_NKRO:
keymap_config.nkro = !keymap_config.nkro;
break;
default:
break;
}
eeconfig_update_keymap(keymap_config.raw);
clear_keyboard(); // clear to prevent stuck keys
return false;
}
break;
case KC_LSPO: {
if (record->event.pressed) {
shift_interrupted[0] = false;
scs_timer[0] = timer_read ();
register_mods(MOD_BIT(KC_LSFT));
}
else {
#ifdef DISABLE_SPACE_CADET_ROLLOVER
if (get_mods() & MOD_BIT(KC_RSFT)) {
shift_interrupted[0] = true;
shift_interrupted[1] = true;
}
#endif
if (!shift_interrupted[0] && timer_elapsed(scs_timer[0]) < TAPPING_TERM) {
register_code(LSPO_KEY);
unregister_code(LSPO_KEY);
}
unregister_mods(MOD_BIT(KC_LSFT));
}
return false;
}
case KC_RSPC: {
if (record->event.pressed) {
shift_interrupted[1] = false;
scs_timer[1] = timer_read ();
register_mods(MOD_BIT(KC_RSFT));
}
else {
#ifdef DISABLE_SPACE_CADET_ROLLOVER
if (get_mods() & MOD_BIT(KC_LSFT)) {
shift_interrupted[0] = true;
shift_interrupted[1] = true;
}
#endif
if (!shift_interrupted[1] && timer_elapsed(scs_timer[1]) < TAPPING_TERM) {
register_code(RSPC_KEY);
unregister_code(RSPC_KEY);
}
unregister_mods(MOD_BIT(KC_RSFT));
}
return false;
}
case KC_SFTENT: {
if (record->event.pressed) {
shift_interrupted[1] = false;
scs_timer[1] = timer_read ();
register_mods(MOD_BIT(KC_RSFT));
}
else if (!shift_interrupted[1] && timer_elapsed(scs_timer[1]) < TAPPING_TERM) {
unregister_mods(MOD_BIT(KC_RSFT));
register_code(SFTENT_KEY);
unregister_code(SFTENT_KEY);
}
else {
unregister_mods(MOD_BIT(KC_RSFT));
}
return false;
}
case GRAVE_ESC: {
uint8_t shifted = get_mods() & ((MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)
|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)));
#ifdef GRAVE_ESC_ALT_OVERRIDE
// if ALT is pressed, ESC is always sent
// this is handy for the cmd+opt+esc shortcut on macOS, among other things.
if (get_mods() & (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT))) {
shifted = 0;
}
#endif
#ifdef GRAVE_ESC_CTRL_OVERRIDE
// if CTRL is pressed, ESC is always sent
// this is handy for the ctrl+shift+esc shortcut on windows, among other things.
if (get_mods() & (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL))) {
shifted = 0;
}
#endif
#ifdef GRAVE_ESC_GUI_OVERRIDE
// if GUI is pressed, ESC is always sent
if (get_mods() & (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI))) {
shifted = 0;
}
#endif
#ifdef GRAVE_ESC_SHIFT_OVERRIDE
// if SHIFT is pressed, ESC is always sent
if (get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) {
shifted = 0;
}
#endif
if (record->event.pressed) {
grave_esc_was_shifted = shifted;
add_key(shifted ? KC_GRAVE : KC_ESCAPE);
}
else {
del_key(grave_esc_was_shifted ? KC_GRAVE : KC_ESCAPE);
}
send_keyboard_report();
return false;
}
#if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_BREATHING)
case BL_BRTG: {
if (record->event.pressed)
breathing_toggle();
return false;
}
#endif
default: {
shift_interrupted[0] = true;
shift_interrupted[1] = true;
break;
}
}
return process_action_kb(record);
}
__attribute__ ((weak))
const bool ascii_to_shift_lut[0x80] PROGMEM = {
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 1, 1, 1, 1, 1, 0,
1, 1, 1, 1, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 1, 0, 1, 0, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 0, 0, 0, 1, 1,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 1, 1, 1, 1, 0
};
__attribute__ ((weak))
const uint8_t ascii_to_keycode_lut[0x80] PROGMEM = {
0, 0, 0, 0, 0, 0, 0, 0,
KC_BSPC, KC_TAB, KC_ENT, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, KC_ESC, 0, 0, 0, 0,
KC_SPC, KC_1, KC_QUOT, KC_3, KC_4, KC_5, KC_7, KC_QUOT,
KC_9, KC_0, KC_8, KC_EQL, KC_COMM, KC_MINS, KC_DOT, KC_SLSH,
KC_0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,
KC_8, KC_9, KC_SCLN, KC_SCLN, KC_COMM, KC_EQL, KC_DOT, KC_SLSH,
KC_2, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_6, KC_MINS,
KC_GRV, KC_A, KC_B, KC_C, KC_D, KC_E, KC_F, KC_G,
KC_H, KC_I, KC_J, KC_K, KC_L, KC_M, KC_N, KC_O,
KC_P, KC_Q, KC_R, KC_S, KC_T, KC_U, KC_V, KC_W,
KC_X, KC_Y, KC_Z, KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV, KC_DEL
};
void send_string(const char *str) {
send_string_with_delay(str, 0);
}
void send_string_P(const char *str) {
send_string_with_delay_P(str, 0);
}
void send_string_with_delay(const char *str, uint8_t interval) {
while (1) {
char ascii_code = *str;
if (!ascii_code) break;
if (ascii_code == 1) {
// tap
uint8_t keycode = *(++str);
register_code(keycode);
unregister_code(keycode);
} else if (ascii_code == 2) {
// down
uint8_t keycode = *(++str);
register_code(keycode);
} else if (ascii_code == 3) {
// up
uint8_t keycode = *(++str);
unregister_code(keycode);
} else {
send_char(ascii_code);
}
++str;
// interval
{ uint8_t ms = interval; while (ms--) wait_ms(1); }
}
}
void send_string_with_delay_P(const char *str, uint8_t interval) {
while (1) {
char ascii_code = pgm_read_byte(str);
if (!ascii_code) break;
if (ascii_code == 1) {
// tap
uint8_t keycode = pgm_read_byte(++str);
register_code(keycode);
unregister_code(keycode);
} else if (ascii_code == 2) {
// down
uint8_t keycode = pgm_read_byte(++str);
register_code(keycode);
} else if (ascii_code == 3) {
// up
uint8_t keycode = pgm_read_byte(++str);
unregister_code(keycode);
} else {
send_char(ascii_code);
}
++str;
// interval
{ uint8_t ms = interval; while (ms--) wait_ms(1); }
}
}
void send_char(char ascii_code) {
uint8_t keycode;
keycode = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]);
if (pgm_read_byte(&ascii_to_shift_lut[(uint8_t)ascii_code])) {
register_code(KC_LSFT);
register_code(keycode);
unregister_code(keycode);
unregister_code(KC_LSFT);
} else {
register_code(keycode);
unregister_code(keycode);
}
}
void set_single_persistent_default_layer(uint8_t default_layer) {
#if defined(AUDIO_ENABLE) && defined(DEFAULT_LAYER_SONGS)
PLAY_SONG(default_layer_songs[default_layer]);
#endif
eeconfig_update_default_layer(1U<<default_layer);
default_layer_set(1U<<default_layer);
}
uint32_t update_tri_layer_state(uint32_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
uint32_t mask12 = (1UL << layer1) | (1UL << layer2);
uint32_t mask3 = 1UL << layer3;
return (state & mask12) == mask12 ? (state | mask3) : (state & ~mask3);
}
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
layer_state_set(update_tri_layer_state(layer_state, layer1, layer2, layer3));
}
void tap_random_base64(void) {
#if defined(__AVR_ATmega32U4__)
uint8_t key = (TCNT0 + TCNT1 + TCNT3 + TCNT4) % 64;
#else
uint8_t key = rand() % 64;
#endif
switch (key) {
case 0 ... 25:
register_code(KC_LSFT);
register_code(key + KC_A);
unregister_code(key + KC_A);
unregister_code(KC_LSFT);
break;
case 26 ... 51:
register_code(key - 26 + KC_A);
unregister_code(key - 26 + KC_A);
break;
case 52:
register_code(KC_0);
unregister_code(KC_0);
break;
case 53 ... 61:
register_code(key - 53 + KC_1);
unregister_code(key - 53 + KC_1);
break;
case 62:
register_code(KC_LSFT);
register_code(KC_EQL);
unregister_code(KC_EQL);
unregister_code(KC_LSFT);
break;
case 63:
register_code(KC_SLSH);
unregister_code(KC_SLSH);
break;
}
}
/** \brief Layer xor
*
* FIXME: Needs docs
*/
void layer_xor(uint32_t state)
{
layer_state_set(layer_state ^ state);
}
/** \brief Layer and
*
* FIXME: Needs docs
*/
void layer_and(uint32_t state)
{
layer_state_set(layer_state & state);
}
/** \brief Layer or
*
* FIXME: Needs docs
*/
void layer_or(uint32_t state)
{
layer_state_set(layer_state | state);
}
/** \brief Layer invert
*
* FIXME: Needs docs
*/
void layer_invert(uint8_t layer)
{
layer_state_set(layer_state ^ (1UL<<layer));
}
/** \brief Layer off
*
* FIXME: Needs docs
*/
void layer_off(uint8_t layer)
{
layer_state_set(layer_state & ~(1UL<<layer));
}
/** \brief Layer on
*
* FIXME: Needs docs
*/
void layer_on(uint8_t layer)
{
layer_state_set(layer_state | (1UL<<layer));
}
/** \brief Layer move
*
* FIXME: Needs docs
*/
void layer_move(uint8_t layer)
{
layer_state_set(1UL<<layer);
}
/** \brief Layer clear
*
* FIXME: Needs docs
*/
void layer_clear(void)
{
layer_state_set(0);
}
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
layer_state_set(update_tri_layer_state(layer_state, layer1, layer2, layer3));
}