void ic_update_lcd(i_charger *ic)
{
//first line of 1602 given to charger...
lcd_cursor(0,0);
if(ic->i_stage == STOP){
lcd_puts("END");
short x = 1000*ic->voltage;
print10(x);
info("TOP");
x =1000*ic->top_voltage;
print10(x);
}else{
lcd_puts("PWM");
print10(pwm_getduty());
lcd_puts(" ");
}
}
uint8_t Sensornummerlesen(uint8_t index, uint8_t* nummer)
{
uint8_t tempScratchPad[9];
if ((DS18X20_read_scratchpad(&gSensorIDs[index][0], tempScratchPad ))== DS18X20_OK)
{
lcd_gotoxy(14,1);
lcd_puts("GUT\0");
*nummer=tempScratchPad[2];
return DS18X20_OK;
}
else
{
lcd_gotoxy(14,1);
lcd_puts("BAD\0");
*nummer=0xFF;
return DS18X20_ERROR;
}
}
static void tui_draw_mainpage(uint8_t forced) {
uint8_t d;
unsigned char line[17];
unsigned char buf[16];
line[16]=0;
if (!forced) {
static uint8_t drawcnt=0;
drawcnt++;
if ((drawcnt&1)==0) {
uint8_t i;
for (i=0;i<4;i++) {
uint8_t c = tui_mp_modidx[i] + 1;
if (c >= TUI_MODS_MAXDEPTH) c=0;
if (tui_mp_mods[i][c] == 255) c=0;
tui_mp_modidx[i] = c;
}
}
}
// Line 0
memset(line,' ',16);
d = tui_run_mod(tui_mp_mods[0][tui_mp_modidx[0]],buf,10);
memcpy(line,buf,d);
d = tui_run_mod(tui_mp_mods[1][tui_mp_modidx[1]],buf,15-d);
memcpy(&(line[16-d]),buf,d);
lcd_gotoxy(0,0);
lcd_puts(line);
// Line 1
memset(line,' ',16);
d = tui_run_mod(tui_mp_mods[2][tui_mp_modidx[2]],buf,10);
memcpy(line,buf,d);
d = tui_run_mod(tui_mp_mods[3][tui_mp_modidx[3]],buf,15-d);
memcpy(&(line[16-d]),buf,d);
lcd_gotoxy(0,1);
lcd_puts(line);
tui_force_draw = 0;
if (!forced) {
tui_refresh_interval = tui_update_refresh_interval();
tui_next_refresh = timer_get_5hz_cnt()+tui_refresh_interval;
}
}
void String_zerlegen_Isel(char * str_rx, char * Position, char * Winkel) {
//0M5200, +600
//Achse M Position, +Geschwindigkeit
char * Achse="0";
Achse[0] = str_rx[1]; // Achse setzen
Achse[1] = '\0';
// Ausgeben welche Achse gewaehlt wurde
if(atoi(Achse)==0){
lcd_puts("Achse: ");
lcd_puts(Achse);
lcd_puts(" (Rotation)\n");
}
if(atoi(Achse)==1){
lcd_puts("Achse: ");
lcd_puts(Achse);
lcd_puts(" (Hoehe) \n");
}
// Anzahl der Schritte aus dem String auslesen
char c;
int i = 0;
do {
c = str_rx[i + 3];
if (c != ',') {
Position[i] = c;
i++;
}
} while (i < 20 && c != '\0' && c != ',');
Position[i] = '\0'; // String 0 Terminieren
int32_t z;
int32_t y;
z = atol(Position); // String in Zahl(long) umwandeln
y = z / 7200; // Berechnung des Winkel
z = (z * 71111) /1024; // Berechnung der Schritte
ltoa(y, Winkel, 10 ); // Winekl in String umwandeln
ltoa(z, Position, 10 ); // Schritte in String umwandeln
void menu_display_status(void)
{
static uint8_t cnt_main_monitor;
//lcd_clear_line( 1 );
//lcd_clear_line( 2 );
lcd_gotoxy( 17, 2 ); lcd_puts(" ");
lcd_gotoxy( 0, 2 );
lcd_puts("MQTT/UDP:");
lcd_puti( mqtt_io_count % 100 ); // Take 2 digits
/*
lcd_puts(" ModBus:");
lcd_puti( modbus_event_cnt % 100 ); // Take 2 digits
lcd_putc( (cnt_main_monitor++ & 1) ? ':' : '.' );
lcd_puti( (modbus_crc_cnt+modbus_exceptions_cnt) % 100 ); // Take 2 digits
//lcd_puts(" ");
*/
//lcd_clear_line( 3 );
lcd_gotoxy( 16, 3 ); lcd_puts(" ");
lcd_gotoxy( 0, 3 );
lcd_puts("EEprom:");
lcd_putc( ui_marker_unsaved ? '*' : '.' );
lcd_puts(" 1WErr:");
lcd_puti( ow_error_cnt % 100 ); // Take 2 digits
//lcd_puts(" ");
lcd_gotoxy( 0, 0 );
lcd_puts("IO Status ");
}
int main(void) {
ANSEL=0;
ANSELH=0;
CM1CON0=0;
CM2CON0=0;
TRISA=0;
TRISC=0;
lcd_init();
while (1==1)
{
lcd_clear();
pause(100);
lcd_goto(0);
pause(1);
for (b0=0; b0<10; b0=b0+1)
{
lcd_putch( b0 + number );
pause(2);
}
lcd_goto(0x40);
pause(2);
_delay(4);
__delay_us(1000);
lcd_puts("Hello World");
pause(20);
lcd_puts("_EOF");
pause(10);
}
return 0;
}
void lcd_put_temperatur(uint16_t temperatur)
{
char buffer[8]={};
//uint16_t temp=(temperatur-127)*5;
uint16_t temp=temperatur*5;
// uint16_t temp=temperatur;
lcd_gotoxy(0,1);
lcd_putint16(temp);
// itoa(temp, buffer,10);
r_itoa16(temp,buffer);
// lcd_putc(' * ');
char outstring[8]={};
outstring[7]='\0';
outstring[6]=0xDF;
outstring[5]=buffer[6];
outstring[4]='.';
outstring[3]=buffer[5];
if (abs(temp)<100)
{
outstring[2]=' ';
outstring[1]=' ';
}
else if (abs(temp)<1000)
{
outstring[2]=buffer[4];
outstring[1]=' ';
}
else
{
outstring[2]=buffer[4];
outstring[1]=buffer[3];
}
outstring[0]=buffer[0];
/*
if (temp<100)
{
lcd_putc(' ');
}
if (temp<10)
{
lcd_putc(' ');
}
*/
lcd_puts(outstring);
}
void vStartAntBOT(void){
PowerOn();
DDRB = 0xFF;
PORTB = 0xFF;
///* initialize display, cursor off */
lcd_init(LCD_DISP_ON);
///* clear display and home cursor */
lcd_clrscr();
lcd_puts("Ant BOT>\nPower On");
mirf_RX_ADDR_P0 = mirf_Default_ADDR;
mirf_ShockB_init(2);
// RC_SetUnits(500,7);
// test wheels
// RC_SetUnits(500, 6);
// RC_SetUnits(500, 5);
// RC_SetUnits(100, 1);
#if(USE_BOT_CTRL == 1)
vStartControlTask(mainCONTROL_PRIORITY);
#endif
#if(USE_BOT_LIGHTS == 1)
vStartLightsTask( mainLIGHTS_PRIORITY );
#endif
#if(USE_BOT_BUTTON == 1)
vStartButtonTask( mainBUTTON_PRIORITY, 10 );
#endif
#if(USE_BOT_ARM == 1)
vStartArmTask(mainARM_PRIORITY);
#endif
#if(USE_BOT_WHEEL == 1)
vStartWheelTask(mainWHEEL_PRIORITY);
#endif
#if(USE_BOT_SERVO == 1)
RC_StartModule();
#endif
#if(USE_BOT_ADC == 1)
vAdcInit(5);
#endif
}
USB_PUBLIC uchar usbFunctionSetup(uchar data[8]) {
usbRequest_t *rq = (void *)data; // cast data to correct type
switch(rq->bRequest) { // custom command is in the bRequest field
case USB_LED_ON:
PORTB |= 1; // turn LED on
return 0;
case USB_LED_OFF:
PORTB &= ~1; // turn LED off
return 0;
case USB_DATA_OUT: // send data to PC
usbMsgPtr = replyBuf;
LCD_goto(2,0);
lcd_puts(replyBuf);
return sizeof(replyBuf);
case USB_DATA_WRITE: // modify reply buffer
replyBuf[7] = rq->wValue.bytes[0];
replyBuf[8] = rq->wValue.bytes[1];
replyBuf[9] = rq->wIndex.bytes[0];
replyBuf[10] = rq->wIndex.bytes[1];
LCD_goto(2,0);
lcd_puts(replyBuf);
return 0;
case USB_DATA_IN: // receive data from PC
dataLength = (uchar)rq->wLength.word;
dataReceived = 0;
if(dataLength > sizeof(replyBuf)) // limit to buffer size
dataLength = sizeof(replyBuf);
return USB_NO_MSG; // usbFunctionWrite will be called now
}
return 0; // should not get here
}
int main(void)
{
lcd_init(LCD_DISP_ON_CURSOR_BLINK); //Initialize LCD
spi_init_slave(); //Initialize slave SPI
unsigned char data, buffer[10];
DDRA = 0x00; //Initialize PORTA as INPUT
PORTA = 0xFF; //Enable Pull-Up Resistors
while(1)
{
lcd_clrscr(); //LCD Clear screen
lcd_home(); //LCD move cursor to home
lcd_puts("Testing");
lcd_gotoxy(0,1);
data = spi_tranceiver(ACK); //Receive data, send ACK
itoa(data, buffer, 10); //Convert integer into string
lcd_puts(buffer); //Display received data
_delay_ms(20); //Wait
}
}
/**
* Execute the BASIC command in 's'.
*/
void execute(char *s) {
unsigned char command;
char * args;
reset_interrupted();
s = skip_whitespace(s);
args = find_args(s);
command = find_keyword(s);
if (command != CMD_UNKNOWN) {
command_functions[command](args);
} else {
lcd_puts("Unknown command!\n");
}
}
/**
@brief Write int in the specified radix r of minlen w prepended by char c.
@param[in] a int
@param[in] r Radix
@param[in] l Min length
@param[in] c Prepending char
*/
void lcd_puti_lc(const uint32_t a, uint8_t r, uint8_t l, char c)
{
char s[10];
itoa(a, s, r);
while( l > strlen(s) ) {
lcd_putc(c);
l--;
}
lcd_puts(s);
}
void lcd_putint2(uint8_t zahl) //zweistellige Zahl
{
char string[3];
int8_t i; // SchleifenzŠhler
zahl%=100; // 2 hintere Stelle
// string[4]='\0'; // String Terminator
string[2]='\0'; // String Terminator
for(i=1; i>=0; i--) {
string[i]=(zahl % 10) +'0'; // Modulo rechnen, dann den ASCII-Code von '0' addieren
zahl /= 10;
}
lcd_puts(string);
}
/* prompt user to plug USB and fix a problem */
static void prompt_usb(const char* msg1, const char* msg2)
{
int button;
lcd_clear_display();
lcd_puts(0, 0, msg1);
lcd_puts(0, 1, msg2);
#ifdef HAVE_LCD_BITMAP
lcd_puts(0, 2, "Insert USB cable");
lcd_puts(0, 3, "and fix it.");
#endif
lcd_update();
do
{
button = button_get(true);
if (button == SYS_POWEROFF)
{
power_off();
}
} while (button != SYS_USB_CONNECTED);
usb_screen();
system_reboot();
}
void frontend_tempdetails(uint8_t **wheel_target, uint8_t *next_state, int16_t *measVal, uint16_t measMiddle, uint8_t nSensors){
char buffer[8];
*wheel_target = NULL;
*next_state = MENU_MAIN;
lcd_clrscr();
for(uint8_t i = 0; i < nSensors; i++){
if((i+1)%2 != 0){
lcd_gotoxy(0,(i/2));
}else{
lcd_gotoxy(8, (i/2));
}
sprintf(buffer, "%i:", i);
lcd_puts(buffer);
DS18X20_format_from_decicelsius(measVal[i], buffer, 10);
lcd_puts(buffer);
}
lcd_gotoxy(8,1);
lcd_putc(AVERAGE);
lcd_puts(":");
DS18X20_format_from_decicelsius(measMiddle, buffer, 10);
lcd_puts(buffer);
}
void weck_page_print_page(eds_weck_page_block_t *p)
{
char s[32];
uint16_t dauer;
uint8_t d1,d2;
// LCD Bildschirm loeschen
lcd_clrscr();
if (weck_page_state == STATE_VIEW)
{
if (get_weck_details(p->weck_id, &dauer) != 0)
{
// vermutlich keine Antwort gekommen
snprintf_P(s,sizeof(s)-1,
PSTR("Fehler!"));
lcd_gotoxy(0,1);
lcd_puts(s);
return;
}
}
if (weck_page_state == STATE_EDIT)
{
dauer = weck_details_dauer_edit;
}
// 1. Zeile
snprintf_P(s,sizeof(s)-1,PSTR("%8s"),p->name);
lcd_gotoxy(0,0);
lcd_puts(s);
// 2. Zeile
d1 = dauer / 3600;
d2 = (dauer / 60) % 60;
snprintf_P(s,sizeof(s)-1, PSTR("wecken in %d:%02dh"),d1,d2);
lcd_gotoxy(0,1);
lcd_puts(s);
}
void lcd_putint(uint8_t zahl)
{
char string[4];
int8_t i; // schleifenzŠhler
string[3]='\0'; // String Terminator
for(i=2; i>=0; i--)
{
string[i]=(zahl % 10) +'0'; // Modulo rechnen, dann den ASCII-Code von '0' addieren
zahl /= 10;
}
lcd_puts(string);
}
void menuStatisticsView(uint8_t event)
{
TITLE(STR_MENUSTAT);
switch(event)
{
case EVT_KEY_FIRST(KEY_UP):
chainMenu(menuStatisticsDebug);
return;
#if defined(PCBTARANIS)
case EVT_KEY_LONG(KEY_MENU):
g_eeGeneral.globalTimer = 0;
break;
#endif
case EVT_KEY_FIRST(KEY_EXIT):
chainMenu(menuMainView);
return;
}
lcd_puts( 1*FW, FH*0, STR_TOTTM1TM2THRTHP);
putsTimer( 5*FW+5*FWNUM+1, FH*1, timersStates[0].val, 0, 0);
putsTimer( 12*FW+5*FWNUM+1, FH*1, timersStates[1].val, 0, 0);
putsTimer( 5*FW+5*FWNUM+1, FH*2, s_timeCumThr, 0, 0);
putsTimer( 12*FW+5*FWNUM+1, FH*2, s_timeCum16ThrP/16, 0, 0);
putsTimer( 12*FW+5*FWNUM+1, FH*0, s_timeCumTot, 0, 0);
#if defined(PCBTARANIS)
putsTimer(21*FW+5*FWNUM+1, 0*FH, g_eeGeneral.globalTimer + sessionTimer, 0, 0);
#endif
#if defined(THRTRACE)
uint8_t traceRd = (s_traceCnt < 0 ? s_traceWr : 0);
const uint8_t x=5;
const uint8_t y=60;
lcd_hline(x-3,y,MAXTRACE+3+3);
lcd_vline(x,y-32,32+3);
for (uint8_t i=0; i<MAXTRACE; i+=6) {
lcd_vline(x+i+6,y-1,3);
}
for (uint8_t i=1; i<=MAXTRACE; i++) {
lcd_vline(x+i, y-s_traceBuf[traceRd], s_traceBuf[traceRd]);
traceRd++;
if (traceRd>=MAXTRACE) traceRd = 0;
if (traceRd==s_traceWr) break;
}
#endif
}
//draws a single line with GPS satellite info
// const uint8_t row - the row to draw the line on
// const loc_state_t* loc - GPS location information
void ui_draw_sat_info( const uint8_t row, const loc_state_t* loc ){
char small_buffer[SMALL_BUF_LEN];
lcd_clearline(row);
lcd_gotoxy(0, row);
//print out the dilution of precision meter
lcd_gotoxy(0, row);
if( (loc->dop) <= MAX_GREAT_DOP ){ //if dop is ideal or excellent
lcd_putc(FULL_SIG_CHAR);
} else if( (loc->dop) <= MAX_GOOD_DOP ){ //if dop is good
lcd_putc(GOOD_SIG_CHAR);
} else if( (loc->dop) <= MAX_ACCEPTABLE_DOP ){ //if dop is moderate
lcd_putc(LOW_SIG_CHAR);
} else { //if dop is fair or poor
lcd_putc(BAD_SIG_CHAR);
}
//number of satellites
lcd_gotoxy(1, row);
sprintf_P( small_buffer, PSTR("%dst"), loc->sats );
lcd_puts( small_buffer );
//time in HH:MM:SS
lcd_gotoxy(8, row);
sprintf_P( small_buffer,
PSTR("%lu:%lu:%lu"),
(((loc->time)/10000)
#ifdef USE_TIME_ZONE
+24+TIME_ZONE)%24
#else
)
#endif
,
((loc->time)%10000)/100,
(loc->time)%100);
lcd_puts( small_buffer );
}
void menuTelemetryArduPilot3(uint8_t event)
{
switch(event)
{
case EVT_KEY_FIRST(KEY_UP):
chainMenu(menuTelemetryArduPilot2);
break;
case EVT_KEY_FIRST(KEY_DOWN):
chainMenu(menuTelemetryArduPilot4);
break;
case EVT_KEY_FIRST(KEY_EXIT):
ARDUPILOT_DisableRXD();
chainMenu(menuMainView);
break;
}
initval (0, PACK_POS, ALT);
initval (1, PACK_POS, ALH);
title ('3');
lcd_puts (1*FW, 1*FH, PSTR(" Altitude"));
lcd_putsAtt (2*FW, 2*FH, VALSTR(0), APSIZE);
lcd_puts (1*FW, 4*FH, PSTR(" Altitude Hold") );
lcd_putsAtt (2*FW, 5*FH, VALSTR(1), APSIZE);
}
void menuTelemetryArduPilot2(uint8_t event)
{
switch(event)
{
case EVT_KEY_FIRST(KEY_UP):
chainMenu(menuTelemetryArduPilot1);
break;
case EVT_KEY_FIRST(KEY_DOWN):
chainMenu(menuTelemetryArduPilot3);
break;
case EVT_KEY_FIRST(KEY_EXIT):
ARDUPILOT_DisableRXD();
chainMenu(menuMainView);
break;
}
initval (0, PACK_POS, SPD);
initval (1, PACK_POS, CRT);
title ('2');
lcd_puts (1*FW, 1*FH, PSTR(" Ground speed"));
lcd_putsAtt (2*FW, 2*FH, VALSTR(0), APSIZE);
lcd_puts (1*FW, 4*FH, PSTR(" Climb rate") );
lcd_putsAtt (2*FW, 5*FH, VALSTR(1), APSIZE);
}
void act_hd44780_Init(void)
{
///FIXME: What is this, this needs to be more clear by far....
// Contrast (brightness on an oled display)
TCCR0A |= (1<<COM0B1)|(1<<WGM01)|(1<<WGM00);
TCCR0B |= (1<<CS00);
OCR0B = act_hd44780_INITIAL_CONTRAST;
DDRD |= (1<<PD5);
#if (act_hd44780_TYPE==0)
// Backlight
TCCR0A |= (1<<COM0A1)|(1<<WGM01)|(1<<WGM00);
TCCR0B |= (1<<CS00);
OCR0A = act_hd44780_INITIAL_BACKLIGHT;
DDRD |= (1<<PD6);
#endif
lcd_init(LCD_DISP_ON);
lcd_clrscr();
lcd_puts("HomeAutomation\n");
lcd_puts("HD44780-module\n");
}
// ADC interrupt service routine
interrupt [ADC_INT] void adc_isr(void)
{
unsigned int adc_data;
// Read the AD conversion result
adc_data=ADCW;
// Place your code here
delay_ms (200);
lcd_clear();
//temp1=read_adc(1);
temp=((adc_data*5.0)/1023);
ftoa(temp,2,str_temp) ;
lcd_puts(str_temp);
}
void StatusMode_in(){
int i;
lcd_copypage(2, 1);
lcd_setshowpage(1);
lcd_setdrawpage(1);
status_x = lcd_getcurx();
status_y = lcd_getcury();
lcd_setforeground(COL_BLACK);
lcd_setbackground(COL_WHITE);
lcd_locate(0, WindowHeight - 1);
for(i=0;i<WindowWidth;i++)
lcd_puts(" ");
}
void menuTelemetryArduPilot4(uint8_t event)
{
switch(event)
{
case EVT_KEY_FIRST(KEY_UP):
chainMenu(menuTelemetryArduPilot3);
break;
case EVT_KEY_FIRST(KEY_DOWN):
chainMenu(menuTelemetryArduPilot5);
break;
case EVT_KEY_FIRST(KEY_EXIT):
ARDUPILOT_DisableRXD();
chainMenu(menuMainView);
break;
}
initval (0, PACK_POS, CRS);
initval (1, PACK_POS, BER);
title ('4');
lcd_puts (1*FW, 1*FH, PSTR(" Course"));
lcd_putsAtt (2*FW, 2*FH, VALSTR(0), APSIZE);
lcd_puts (1*FW, 4*FH, PSTR(" Bearing"));
lcd_putsAtt (2*FW, 5*FH, VALSTR(1), APSIZE);
}
void zero_init()
{
lcd_clear();
lcd_puts("Memory init");
write_var(0, 0, 0x19);
write_var(0, 1, 0x08);
write_var(0, 2, 0x1E); //30
block = 0;
addr = 3;
for(i = 0; i < MAX_PATTERNS; i++)
{
write_var(block, addr, v1.length);
addr++;
check_ab();
for(j = 0; j < MAX_ITEMS; j++)
{
lcd_gotoxy(0, 1);
lcd_puts(t_preset);
lcd_putchar(' ');
LCDWriteInt(i, 0);
lcd_putchar(' ');
lcd_puts(t_item);
lcd_putchar(' ');
LCDWriteInt(j, 0);
lcd_putchar(' ');
write_var(block, addr, v1.out[j]);
addr++;
check_ab();
}
}
}
int main(void)
{
RCC->AHBENR |= RCC_AHBENR_GPIOAEN; // enable the clock to GPIOA
RCC->AHBENR |= RCC_AHBENR_GPIOBEN; // enable the clock to GPIOB
RCC->AHBENR |= RCC_AHBENR_GPIOCEN; // enable the clock to GPIOC
// Put PORTC.8 in output mode
GPIOC->MODER |= (1 << 16);
// Put PORTC.9 in output mode
GPIOC->MODER |= (1 << 18);
// Put PORTA.0 in input mode
GPIOA->MODER &= ~(3 << 0);
// This configures interrupt such that SysTick_Handler is called
// at ever TIMER_TICK_HZ i.e. 1/1000 = 1ms
SysTick_Config(SystemCoreClock / TIMER_TICK_HZ);
// Initialize the lcd
lcd_init();
lcd_puts(" STM32F051");
lcd_gotoxy(1, 4);
lcd_puts("LCD TEST");
while(1)
{
// Set PORTC.8
GPIOC->BSRR = (1 << 8);
delay_ms(1000);
// Reset PORTC.8
GPIOC->BRR = (1 << 8);
delay_ms(1000);
}
}
int main( void )
{
uint32_t val = 0;
char s[sizeof("4294967295")]; // ASCII space for 32 bit number
char textbuf [ 16 + 1 ];
//_delay_ms ( 5000 );
lcd_init();
#if 1
char *p;
if ( 1 ) {
char *source = "68u65gujl";
unsigned int i;
for ( i = 0; i < strlen ( source ); i++ ) {
textbuf [ i ] = source [ i ];
}
textbuf [ i ] = '\0';
lcd_xy( 0, 0 );
lcd_puts( textbuf ); // display number right adjusted
}
#endif
#if 0
for(;;){
ultoa( val, s, 10 );
lcd_xy( 0, 1 );
lcd_blank( 10 - strlen( s )); // insert spaces until number
lcd_puts( s ); // display number right adjusted
val++;
}
#endif
return ( 0 );
}
void lcd_put_tempbis99(uint16_t temperatur)
{
char buffer[7]={};
//uint16_t temp=(temperatur-127)*5;
//lcd_gotoxy(0,1);
//lcd_puts("t:\0");
//lcd_putint((uint8_t) temperatur);
uint16_t temp=(temperatur)*5;
//lcd_puts("T:\0");
//lcd_putint16(temp);
// uint16_t temp=temperatur;
// itoa(temp, buffer,10);
r_itoa16(temp,buffer);
// lcd_puts(buffer);
// lcd_putc(' * ');
char outstring[7]={};
outstring[6]='\0';
outstring[5]=0xDF;
outstring[4]=buffer[6];
outstring[3]='.';
outstring[2]=buffer[5];
if (abs(temp)<100)
{
outstring[1]=' ';
}
else
{
outstring[1]=buffer[4];
}
outstring[0]=buffer[0];
/*
if (temp<100)
{
lcd_putc(' ');
}
if (temp<10)
{
lcd_putc(' ');
}
*/
lcd_puts(outstring);
lcddelay_ms(2);
}
void update_LC(void)
{
double C,L; /*to caculate */
double f=F;
char sC=0, sL=0;
L= 1/(((f*2*pi)*(f*2*pi))*C0);
C= 1/(((f*2*pi)*(f*2*pi))*L0);
L-=L0;
C-=C0;
L*=pow(10,6); /*uH*/
C*=pow(10,12); /*pF*/
if(L<0){ sL=1; L=-L;}
if(C<0){ sC=1; C=-C;}
lcd_puts("L:");
if(sL)lcd_putc('-');
L*=10000; /*0.1nH*/
print10L(L,9,4);
lcd_puts("uH ");
lcd_cursor(0,3);
lcd_puts("C:");
if(sC)lcd_putc('-');
C*=10; /*0.1 pF*/
print10L(C,8,1);
lcd_puts("pF ");
}
