void cpu_init_idt(void)
{
struct region_descriptor region;
setregion(®ion, idt, NIDT * sizeof(idt[0]) - 1);
lidt(®ion);
}
/* idt_init - initialize IDT to each of the entry points in kern/trap/vectors.S */
void
idt_init(void) {
/* LAB1 YOUR CODE : STEP 2 */
/* (1) Where are the entry addrs of each Interrupt Service Routine (ISR)?
* All ISR's entry addrs are stored in __vectors. where is uintptr_t __vectors[] ?
* __vectors[] is in kern/trap/vector.S which is produced by tools/vector.c
* (try "make" command in lab1, then you will find vector.S in kern/trap DIR)
* You can use "extern uintptr_t __vectors[];" to define this extern variable which will be used later.
* (2) Now you should setup the entries of ISR in Interrupt Description Table (IDT).
* Can you see idt[256] in this file? Yes, it's IDT! you can use SETGATE macro to setup each item of IDT
* (3) After setup the contents of IDT, you will let CPU know where is the IDT by using 'lidt' instruction.
* You don't know the meaning of this instruction? just google it! and check the libs/x86.h to know more.
* Notice: the argument of lidt is idt_pd. try to find it!
*/
extern uintptr_t __vectors[];
int i;
int k;
k=sizeof(idt)/sizeof(struct gatedesc);
for (i = 0; i < k; i ++) {
SETGATE(idt[i], 0, GD_KTEXT, __vectors[i], DPL_KERNEL);
}
SETGATE(idt[T_SWITCH_TOK], 0, GD_KTEXT, __vectors[T_SWITCH_TOK], DPL_USER);
lidt(&idt_pd);
}
void InterruptUtils::initialise()
{
// allocate some memory for our handlers
GateDesc *interrupt_gates = new GateDesc[NUM_INTERRUPT_HANDLERS];
for (uint32 i = 0; i < NUM_INTERRUPT_HANDLERS; ++i)
{
interrupt_gates[i].offset_low = LO_WORD(handlers[i].offset);
interrupt_gates[i].offset_high = HI_WORD(handlers[i].offset);
interrupt_gates[i].gate_size = GATE_SIZE_32_BIT;
interrupt_gates[i].present = 1;
interrupt_gates[i].reserved = 0;
interrupt_gates[i].segment_selector = KERNEL_CS;
interrupt_gates[i].type = TYPE_INTERRUPT_GATE;
interrupt_gates[i].unused = 0;
interrupt_gates[i].zeros = 0;
interrupt_gates[i].dpl = (handlers[i].number == SYSCALL_INTERRUPT ?
DPL_USER_SPACE : DPL_KERNEL_SPACE);
}
IDTR idtr;
idtr.base = (uint32)interrupt_gates;
idtr.limit = sizeof(GateDesc)*NUM_INTERRUPT_HANDLERS - 1;
lidt(&idtr);
}
void InterruptUtils::initialise()
{
uint32 num_handlers = 0;
for (uint32 i = 0; handlers[i].offset != 0; ++i)
num_handlers = handlers[i].number;
++num_handlers;
// allocate some memory for our handlers
GateDesc *interrupt_gates = new GateDesc[num_handlers];
uint32 j = 0;
for (uint32 i = 0; i < num_handlers; ++i)
{
while (handlers[j].number < i && handlers[j].offset != 0)
++j;
interrupt_gates[i].offset_low = LO_WORD((handlers[j].number == i && handlers[j].offset != 0) ? handlers[j].offset : arch_dummyHandler);
interrupt_gates[i].offset_high = HI_WORD((handlers[j].number == i && handlers[j].offset != 0) ? handlers[j].offset : arch_dummyHandler);
interrupt_gates[i].gate_size = GATE_SIZE_32_BIT;
interrupt_gates[i].present = 1;
interrupt_gates[i].reserved = 0;
interrupt_gates[i].segment_selector = KERNEL_CS;
interrupt_gates[i].type = TYPE_INTERRUPT_GATE;
interrupt_gates[i].unused = 0;
interrupt_gates[i].zeros = 0;
interrupt_gates[i].dpl = ((i == SYSCALL_INTERRUPT && handlers[j].number == i) ? DPL_USER_SPACE : DPL_KERNEL_SPACE);
}
IDTR idtr;
idtr.base = (uint32) interrupt_gates;
idtr.limit = sizeof(GateDesc) * num_handlers - 1;
lidt(&idtr);
}
/* idt_init - initialize IDT to each of the entry points in kern/trap/vectors.S */
void
idt_init(void) {
/* LAB1 2011011384 : STEP 2 */
/* (1) Where are the entry addrs of each Interrupt Service Routine (ISR)?
* All ISR's entry addrs are stored in __vectors. where is uintptr_t __vectors[] ?
* __vectors[] is in kern/trap/vector.S which is produced by tools/vector.c
* (try "make" command in lab1, then you will find vector.S in kern/trap DIR)
* You can use "extern uintptr_t __vectors[];" to define this extern variable which will be used later.
* (2) Now you should setup the entries of ISR in Interrupt Description Table (IDT).
* Can you see idt[256] in this file? Yes, it's IDT! you can use SETGATE macro to setup each item of IDT
* (3) After setup the contents of IDT, you will let CPU know where is the IDT by using 'lidt' instruction.
* You don't know the meaning of this instruction? just google it! and check the libs/x86.h to know more.
* Notice: the argument of lidt is idt_pd. try to find it!
*/
//the global descriptor table is loaded at bootasm.s
//code seg is at 0x08
extern uintptr_t __vectors[];
int i;
for(i = 0; i < 256; i++) {
SETGATE(idt[i], 0, 0x08, __vectors[i], 0);
}
SETGATE(idt[T_SWITCH_TOU], 0, 0x08, __vectors[T_SWITCH_TOU], 3);
SETGATE(idt[T_SWITCH_TOK], 0, 0x08, __vectors[T_SWITCH_TOK], 3);
lidt(&idt_pd);
}
/*
* AP cpu's call this to sync up protected mode.
*
* WARNING! We must ensure that the cpu is sufficiently initialized to
* be able to use to the FP for our optimized bzero/bcopy code before
* we enter more mainstream C code.
*
* WARNING! %fs is not set up on entry. This routine sets up %fs.
*/
void
init_secondary(void)
{
int gsel_tss;
int x, myid = bootAP;
u_int cr0;
struct mdglobaldata *md;
struct privatespace *ps;
ps = &CPU_prvspace[myid];
gdt_segs[GPRIV_SEL].ssd_base = (int)ps;
gdt_segs[GPROC0_SEL].ssd_base =
(int) &ps->mdglobaldata.gd_common_tss;
ps->mdglobaldata.mi.gd_prvspace = ps;
for (x = 0; x < NGDT; x++) {
ssdtosd(&gdt_segs[x], &gdt[myid * NGDT + x].sd);
}
r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1;
r_gdt.rd_base = (int) &gdt[myid * NGDT];
lgdt(&r_gdt); /* does magic intra-segment return */
lidt(&r_idt);
lldt(_default_ldt);
mdcpu->gd_currentldt = _default_ldt;
gsel_tss = GSEL(GPROC0_SEL, SEL_KPL);
gdt[myid * NGDT + GPROC0_SEL].sd.sd_type = SDT_SYS386TSS;
md = mdcpu; /* loaded through %fs:0 (mdglobaldata.mi.gd_prvspace)*/
md->gd_common_tss.tss_esp0 = 0; /* not used until after switch */
md->gd_common_tss.tss_ss0 = GSEL(GDATA_SEL, SEL_KPL);
md->gd_common_tss.tss_ioopt = (sizeof md->gd_common_tss) << 16;
md->gd_tss_gdt = &gdt[myid * NGDT + GPROC0_SEL].sd;
md->gd_common_tssd = *md->gd_tss_gdt;
ltr(gsel_tss);
/*
* Set to a known state:
* Set by mpboot.s: CR0_PG, CR0_PE
* Set by cpu_setregs: CR0_NE, CR0_MP, CR0_TS, CR0_WP, CR0_AM
*/
cr0 = rcr0();
cr0 &= ~(CR0_CD | CR0_NW | CR0_EM);
load_cr0(cr0);
pmap_set_opt(); /* PSE/4MB pages, etc */
/* set up CPU registers and state */
cpu_setregs();
/* set up FPU state on the AP */
npxinit(__INITIAL_NPXCW__);
/* set up SSE registers */
enable_sse();
}
void InterruptUtils::initialise()
{
uint32 num_handlers = 0;
for (uint32 i = 0; handlers[i].offset != 0; ++i)
num_handlers = handlers[i].number;
++num_handlers;
// allocate some memory for our handlers
GateDesc *interrupt_gates = new GateDesc[num_handlers];
size_t dummy_handler_sled_size = (((size_t) arch_dummyHandlerMiddle) - (size_t) arch_dummyHandler);
assert((dummy_handler_sled_size % 128) == 0 && "cannot handle weird padding in the kernel binary");
dummy_handler_sled_size /= 128;
uint32 j = 0;
for (uint32 i = 0; i < num_handlers; ++i)
{
while (handlers[j].number < i && handlers[j].offset != 0)
++j;
interrupt_gates[i].offset_low = LO_WORD((handlers[j].number == i && handlers[j].offset != 0) ? (size_t)handlers[j].offset : (((size_t)arch_dummyHandler)+i*dummy_handler_sled_size));
interrupt_gates[i].offset_high = HI_WORD((handlers[j].number == i && handlers[j].offset != 0) ? (size_t)handlers[j].offset : (((size_t)arch_dummyHandler)+i*dummy_handler_sled_size));
interrupt_gates[i].gate_size = GATE_SIZE_32_BIT;
interrupt_gates[i].present = 1;
interrupt_gates[i].reserved = 0;
interrupt_gates[i].segment_selector = KERNEL_CS;
interrupt_gates[i].type = TYPE_INTERRUPT_GATE;
interrupt_gates[i].unused = 0;
interrupt_gates[i].zeros = 0;
interrupt_gates[i].dpl = ((i == SYSCALL_INTERRUPT && handlers[j].number == i) ? DPL_USER_SPACE : DPL_KERNEL_SPACE);
}
IDTR idtr;
idtr.base = (uint32) interrupt_gates;
idtr.limit = sizeof(GateDesc) * num_handlers - 1;
lidt(&idtr);
}
/* idt_init - initialize IDT to each of the entry points in kern/trap/vectors.S */
void
idt_init(void) {
/* LAB1 2011010312 : STEP 2 */
/* (1) Where are the entry addrs of each Interrupt Service Routine (ISR)?
* All ISR's entry addrs are stored in __vectors. where is uintptr_t __vectors[] ?
* __vectors[] is in kern/trap/vector.S which is produced by tools/vector.c
* (try "make" command in lab1, then you will find vector.S in kern/trap DIR)
* You can use "extern uintptr_t __vectors[];" to define this extern variable which will be used later.
* (2) Now you should setup the entries of ISR in Interrupt Description Table (IDT).
* Can you see idt[256] in this file? Yes, it's IDT! you can use SETGATE macro to setup each item of IDT
* (3) After setup the contents of IDT, you will let CPU know where is the IDT by using 'lidt' instruction.
* You don't know the meaning of this instruction? just google it! and check the libs/x86.h to know more.
* Notice: the argument of lidt is idt_pd. try to find it!
*/
/* LAB5 2011010312 */
//you should update your lab1 code (just add ONE or TWO lines of code), let user app to use syscall to get the service of ucore
//so you should setup the syscall interrupt gate in here
extern uintptr_t __vectors[];
int i;
for(i = 0; i < 256; i++) {
SETGATE(idt[i], 0, KERNEL_CS, __vectors[i], DPL_KERNEL);
}
SETGATE(idt[T_SYSCALL], 1, KERNEL_CS, __vectors[T_SYSCALL], DPL_USER);
lidt(&idt_pd);
}
initevec()
{
int i;
STATWORD ps;
#ifdef __COM32__
puts_com32("initevec() begin");
#endif
for (i=0; i<NID; ++i)
set_evec(i, (int)defevec[i]);
/*
* "girmask" masks all (bus) interrupts with the default handler.
* initially, all, then cleared as handlers are set via set_evec()
*/
girmask = 0xfffb; /* leave bit 2 enabled for IC cascade */
#ifdef __COM32__
puts_com32("initevec() set_evec() done\n");
#endif
lidt();
#ifdef __COM32__
puts_com32("initevec() lidt() done\n");
#endif
init8259();
#ifdef __COM32__
puts_com32("initevec() init8259() done\n");
#endif
}
// Initialize and load the per-CPU TSS and IDT
void
trap_init_percpu(void)
{
// The example code here sets up the Task State Segment (TSS) and
// the TSS descriptor for CPU 0. But it is incorrect if we are
// running on other CPUs because each CPU has its own kernel stack.
// Fix the code so that it works for all CPUs.
//
// Hints:
// - The macro "thiscpu" always refers to the current CPU's
// struct CpuInfo;
// - The ID of the current CPU is given by cpunum() or
// thiscpu->cpu_id;
// - Use "thiscpu->cpu_ts" as the TSS for the current CPU,
// rather than the global "ts" variable;
// - Use gdt[(GD_TSS0 >> 3) + i] for CPU i's TSS descriptor;
// - You mapped the per-CPU kernel stacks in mem_init_mp()
//
// ltr sets a 'busy' flag in the TSS selector, so if you
// accidentally load the same TSS on more than one CPU, you'll
// get a triple fault. If you set up an individual CPU's TSS
// wrong, you may not get a fault until you try to return from
// user space on that CPU.
//
// LAB 4: Your code here:
//------------ Lab4 ----------------------------------------------------------------------------------------
int cpuid = thiscpu->cpu_id;
thiscpu->cpu_ts.ts_esp0 = KSTACKTOP - cpuid * (KSTKGAP + KSTKSIZE);
thiscpu->cpu_ts.ts_ss0 = GD_KD;
gdt[(GD_TSS0 >> 3) + cpuid] = SEG16(STS_T32A, (uint32_t) (&(thiscpu->cpu_ts)),
sizeof(struct Taskstate), 0);
gdt[(GD_TSS0 >> 3) + cpuid].sd_s = 0;
ltr(GD_TSS0 + (cpuid << 3));
lidt(&idt_pd);
//------------ Lab4 ----------------------------------------------------------------------------------------
/*
// Setup a TSS so that we get the right stack
// when we trap to the kernel.
ts.ts_esp0 = KSTACKTOP;
ts.ts_ss0 = GD_KD;
// Initialize the TSS slot of the gdt.
gdt[GD_TSS0 >> 3] = SEG16(STS_T32A, (uint32_t) (&ts),
sizeof(struct Taskstate), 0);
gdt[GD_TSS0 >> 3].sd_s = 0;
// Load the TSS selector (like other segment selectors, the
// bottom three bits are special; we leave them 0)
ltr(GD_TSS0);
// Load the IDT
lidt(&idt_pd);
*/
}
static void
cpu_reset_real()
{
struct region_descriptor null_idt;
int b;
disable_intr();
/*
* Attempt to do a CPU reset via the keyboard controller,
* do not turn off GateA20, as any machine that fails
* to do the reset here would then end up in no man's land.
*/
outb(IO_KBD + 4, 0xFE);
DELAY(500000); /* wait 0.5 sec to see if that did it */
/*
* Attempt to force a reset via the Reset Control register at
* I/O port 0xcf9. Bit 2 forces a system reset when it
* transitions from 0 to 1. Bit 1 selects the type of reset
* to attempt: 0 selects a "soft" reset, and 1 selects a
* "hard" reset. We try a "hard" reset. The first write sets
* bit 1 to select a "hard" reset and clears bit 2. The
* second write forces a 0 -> 1 transition in bit 2 to trigger
* a reset.
*/
outb(0xcf9, 0x2);
outb(0xcf9, 0x6);
DELAY(500000); /* wait 0.5 sec to see if that did it */
/*
* Attempt to force a reset via the Fast A20 and Init register
* at I/O port 0x92. Bit 1 serves as an alternate A20 gate.
* Bit 0 asserts INIT# when set to 1. We are careful to only
* preserve bit 1 while setting bit 0. We also must clear bit
* 0 before setting it if it isn't already clear.
*/
b = inb(0x92);
if (b != 0xff) {
if ((b & 0x1) != 0)
outb(0x92, b & 0xfe);
outb(0x92, b | 0x1);
DELAY(500000); /* wait 0.5 sec to see if that did it */
}
printf("No known reset method worked, attempting CPU shutdown\n");
DELAY(1000000); /* wait 1 sec for printf to complete */
/* Wipe the IDT. */
null_idt.rd_limit = 0;
null_idt.rd_base = 0;
lidt(&null_idt);
/* "good night, sweet prince .... <THUNK!>" */
breakpoint();
/* NOTREACHED */
while(1);
}
void load_idtr()
{
idtr.limit = 256*(sizeof(IDT_t)-1);
idtr.base = idt;
// load IDTR with lidt
lidt(&idtr);
}
void
idt_init(void) {
extern uintptr_t __vectors[];
int i;
for (i = 0; i < sizeof(idt) / sizeof(struct gatedesc); i ++) {
SETGATE(idt[i], 1, GD_KTEXT, __vectors[i], DPL_KERNEL);
}
SETGATE(idt[T_SYSCALL], 1, GD_KTEXT, __vectors[T_SYSCALL], DPL_USER);
lidt(&idt_pd);
}
/* idt_init - initialize IDT to each of the entry points in kern/trap/vectors.S */
void
idt_init(void) {
extern uintptr_t __vectors[];
int i;
for (i = 0; i < sizeof(idt) / sizeof(struct gatedesc); i ++) {
SETGATE(idt[i], 0, GD_KTEXT, __vectors[i], DPL_KERNEL);
}
// load the IDT
lidt(&idt_pd);
}
/*
* void populate_idt();
* Inputs: none
* Return Value: void
* Function: Fills the idt with the correct functions
*/
void populate_idt()
{
int i;
/*initializing the specific interrupts 0 - 20*/
void (* arr[NUM_VEC]) =
{ ÷_by_zero, &reserved_1, &non_maskable_interrupt,
&breakpoint, &overflow, &BOUND_range_exceeded, &invalid_opcode,
&device_not_available, &double_fault, &coprocessor_segment_overrun,
&invalid_TSS, &segment_not_present, &stack_segment_fault, &general_protection,
&page_fault, &common_interrupt, &floating_point_error, &alignment_check,
&machine_check, &SIMD_floating_point_exception
};
/*iterating through idt, populating with correct interrupts*/
for(i = 0; i< NUM_VEC; i++)
{
idt[i].present = 1;
idt[i].dpl = 0;
idt[i].reserved0 = 0;
idt[i].size = 1;
idt[i].reserved1 = 1;
idt[i].reserved2 = 1;
idt[i].reserved3 = 0;
idt[i].reserved4 = 0;
idt[i].seg_selector = KERNEL_CS;
/*Do not set IDT_ENTRY for 20 - 32 (Intel Reserved) */
if(i >= EXCEPTION_INDEX)
{
/*Set common interrupt for user defined*/
SET_IDT_ENTRY(idt[i],&common_interrupt);
}
else if(i < 20)
{
if( i == 15 )
{
/*DO NOTHING, Intel Reserved*/
}else{
SET_IDT_ENTRY(idt[i], arr[i]);
}
}
}
/*setting more specific interrupts*/
SET_IDT_ENTRY(idt[RTC_INDEX],&asm_rtc);
SET_IDT_ENTRY(idt[KEYBOARD_INDEX],&asm_keyboard);
SET_IDT_ENTRY(idt[SYS_CALLS_INDEX],&syscall);
idt[SYS_CALLS_INDEX].dpl = 3;
idt[SYS_CALLS_INDEX].reserved3 = 1;
SET_IDT_ENTRY(idt[PIT_INDEX],&next_task);
/*loading IDTR*/
lidt(idt_desc_ptr);
}
void initevec(void)
{
int i;
/* bzero( idt, sizeof( struct idt ) * 256 ); */
memset( idt, 0, sizeof( struct idt ) * 256 );
for (i=0; i<NID; ++i)
set_evec(i, (long)defevec[i]);
lidt();
init8259();
set_exception=&set_evec;
}
/* idt_init - initialize IDT to each of the entry points in kern/trap/vectors.S */
void
idt_init(void) {
extern uintptr_t __vectors[];
int i;
for (i = 0; i < sizeof(idt) / sizeof(struct gatedesc); i ++) {
SETGATE(idt[i], 0, GD_KTEXT, __vectors[i], DPL_KERNEL);
}
// set for switch from user to kernel
SETGATE(idt[T_SWITCH_TOK], 0, GD_KTEXT, __vectors[T_SWITCH_TOK], DPL_USER);
// load the IDT
lidt(&idt_pd);
}
void trap_init_percpu()
{
extern struct seg_descriptor gdt[CPUNUMS + 5];
extern int ncpu;
uint32_t cid = get_cpuid();
struct taskstate *pts = &(thiscpu->cpu_ts);
//pts->ts_esp0 = KERNEL_STACKTOP - (KERNEL_STKSIZE + KERNEL_STKGAP) * cid;
pts->ts_esp0 = KERN_STACKTOP;
pts->ts_ss0 = _KERNEL_DS_;
gdt[(_TSS0_ >> 3) + cid] = set_seg(STS_T32A, (uint32_t) (pts), sizeof(struct taskstate), 0);
gdt[(_TSS0_ >> 3) + cid].s = 0;
ltr(_TSS0_ + cid * sizeof(struct seg_descriptor));
lidt(&idt_pd);
}
int initevec()
{
int i;
for (i=0; i<NID; ++i)
set_evec(i, (long)defevec[i]);
/*
* "girmask" masks all (bus) interrupts with the default handler.
* initially, all, then cleared as handlers are set via set_evec()
*/
girmask = 0xfffb; /* leave bit 2 enabled for IC cascade */
lidt();
init8259();
return(OK);
}
// Initialize and load the per-CPU TSS and IDT
void
trap_init_percpu(void)
{
// Setup a TSS so that we get the right stack
// when we trap to the kernel.
ts.ts_esp0 = KSTACKTOP;
// Initialize the TSS slot of the gdt.
SETTSS((struct SystemSegdesc64 *)((gdt_pd>>16)+40),STS_T64A, (uint64_t) (&ts),sizeof(struct Taskstate), 0);
// Load the TSS selector (like other segment selectors, the
// bottom three bits are special; we leave them 0)
ltr(GD_TSS0);
// Load the IDT
lidt(&idt_pd);
}
/** Reboot the system. */
void platform_reboot(void) {
uint8_t val;
/* Try the keyboard controller. */
do {
val = in8(0x64);
if(val & (1<<0)) {
in8(0x60);
}
} while(val & (1<<1));
out8(0x64, 0xfe);
spin(5000);
/* Fall back on a triple fault. */
lidt(0, 0);
__asm__ volatile("ud2");
}
// Initialize and load the per-CPU TSS and IDT
void
trap_init_percpu(void)
{
// The example code here sets up the Task State Segment (TSS) and
// the TSS descriptor for CPU 0. But it is incorrect if we are
// running on other CPUs because each CPU has its own kernel stack.
// Fix the code so that it works for all CPUs.
//
// Hints:
// - The macro "thiscpu" always refers to the current CPU's
// struct CpuInfo;
// - The ID of the current CPU is given by cpunum() or
// thiscpu->cpu_id;
// - Use "thiscpu->cpu_ts" as the TSS for the current CPU,
// rather than the global "ts" variable;
// - Use gdt[(GD_TSS0 >> 3) + 2*i] for CPU i's TSS descriptor;
// - You mapped the per-CPU kernel stacks in mem_init_mp()
//
// ltr sets a 'busy' flag in the TSS selector, so if you
// accidentally load the same TSS on more than one CPU, you'll
// get a triple fault. If you set up an individual CPU's TSS
// wrong, you may not get a fault until you try to return from
// user space on that CPU.
//
// LAB 4: Your code here:
// Setup a TSS so that we get the right stack
// when we trap to the kernel.
int id = thiscpu->cpu_id;
size_t kstacktop_ncpus = KSTACKTOP - id*(KSTKSIZE+KSTKGAP);
thiscpu->cpu_ts.ts_esp0 = kstacktop_ncpus;
SETTSS((struct SystemSegdesc64 *)(&gdt[(GD_TSS0>>3)+2*id]),STS_T64A, (uint64_t) (&thiscpu->cpu_ts),sizeof(struct Taskstate), 0);
/*
ts.ts_esp0 = KSTACKTOP;
// Initialize the TSS slot of the gdt.
SETTSS((struct SystemSegdesc64 *)((gdt_pd>>16)+40),STS_T64A, (uint64_t) (&ts),sizeof(struct Taskstate), 0);
// Load the TSS selector (like other segment selectors, the
// bottom three bits are special; we leave them 0) */
ltr(GD_TSS0 + ((2*id << 3) & (~0x7)));
//ltr(GD_TSS0+2*id);
// Load the IDT
lidt(&idt_pd);
}
// Initialize and load the per-CPU TSS and IDT
void
trap_init_percpu(void)
{
// Setup a TSS so that we get the right stack
// when we trap to the kernel.
ts.ts_esp0 = KSTACKTOP;
ts.ts_ss0 = GD_KD;
// Initialize the TSS slot of the gdt.
gdt[GD_TSS0 >> 3] = SEG16(STS_T32A, (uint32_t) (&ts),
sizeof(struct Taskstate) - 1, 0);
gdt[GD_TSS0 >> 3].sd_s = 0;
// Load the TSS selector (like other segment selectors, the
// bottom three bits are special; we leave them 0)
ltr(GD_TSS0);
// Load the IDT
lidt(&idt_pd);
}
int
setup_idt (void)
{
uint_t i;
ulong_t irq_start = (ulong_t)&early_irq_handlers;
ulong_t excp_start = (ulong_t)&early_excp_handlers;
// clear the IDT out
memset(&idt64, 0, sizeof(struct gate_desc64) * NUM_IDT_ENTRIES);
for (i = 0; i < NUM_EXCEPTIONS; i++) {
set_intr_gate(idt64, i, (void*)(excp_start + i*16));
idt_assign_entry(i, (ulong_t)null_excp_handler);
}
for (i = 32; i < NUM_IDT_ENTRIES; i++) {
set_intr_gate(idt64, i, (void*)(irq_start + (i-32)*16));
idt_assign_entry(i, (ulong_t)null_irq_handler);
}
if (idt_assign_entry(PF_EXCP, (ulong_t)nk_pf_handler) < 0) {
ERROR_PRINT("Couldn't assign page fault handler\n");
return -1;
}
if (idt_assign_entry(DF_EXCP, (ulong_t)df_handler) < 0) {
ERROR_PRINT("Couldn't assign double fault handler\n");
return -1;
}
if (idt_assign_entry(0xf, (ulong_t)pic_spur_int_handler) < 0) {
ERROR_PRINT("Couldn't assign PIC spur int handler\n");
return -1;
}
lidt(&idt_descriptor);
return 0;
}
void i86_idt_init(void)
{
memset(IDT32, 0, IDT32_NB_DESCRIPTORS * sizeof(idt_descriptor_t));
// all interrupts are initialized as interrupt gates and only can be executed
// with ring 0's priviledges.
idt_descriptor_flags_t flags;
memset(&flags, 0, sizeof(idt_descriptor_flags_t));
flags.gate_type = IDT_DESC_TYPE_32BIT_INTERRUPT_GATE;
flags.privilege_level = IDT_DESC_PRIVILEGE_RING_0;
flags.present = IDT_DESC_PRESENT_IN_MEMORY;
for (uint16_t i=0; i<IDT32_NB_DESCRIPTORS; ++i) {
if (IDT32_PIC1_INT_VECT_OFFSET <= i
&& i < IDT32_PIC1_INT_VECT_OFFSET + PIC1INTNBR) {
idt_desc_init(ISR32_SEG, _asm_default_pic1_int, flags, &IDT32[i]);
} else if (IDT32_PIC1_INT_VECT_OFFSET <= i
&& i < IDT32_PIC1_INT_VECT_OFFSET + PIC1INTNBR) {
idt_desc_init(ISR32_SEG, _asm_default_pic2_int, flags, &IDT32[i]);
} else {
idt_desc_init(ISR32_SEG, _asm_default_int, flags, &IDT32[i]);
}
}
cntxt_p_mode_32bit.ptr_idt.base = (uint32_t) &IDT32;
cntxt_p_mode_32bit.ptr_idt.limit = sizeof(idt_descriptor_t) * IDT32_NB_DESCRIPTORS;
// load the 32-bit IDT's pointer
lidt(&cntxt_p_mode_32bit.ptr_idt);
#ifdef DEBUG_IDT
debug_printf("IDT: ridt=%#08x, base=%#08x, limit=%#x\r\n",
&cntxt_p_mode_32bit.ptr_idt,
cntxt_p_mode_32bit.ptr_idt.base,
cntxt_p_mode_32bit.ptr_idt.limit);
#endif
}
// Initialize and load the per-CPU TSS and IDT
void
trap_init_percpu(void)
{
// The example code here sets up the Task State Segment (TSS) and
// the TSS descriptor for CPU 0. But it is incorrect if we are
// running on other CPUs because each CPU has its own kernel stack.
// Fix the code so that it works for all CPUs.
//
// Hints:
// - The macro "thiscpu" always refers to the current CPU's
// struct Cpu;
// - The ID of the current CPU is given by cpunum() or
// thiscpu->cpu_id;
// - Use "thiscpu->cpu_ts" as the TSS for the current CPU,
// rather than the global "ts" variable;
// - Use gdt[(GD_TSS0 >> 3) + 2*i] for CPU i's TSS descriptor;
// - You mapped the per-CPU kernel stacks in mem_init_mp()
//
// ltr sets a 'busy' flag in the TSS selector, so if you
// accidentally load the same TSS on more than one CPU, you'll
// get a triple fault. If you set up an individual CPU's TSS
// wrong, you may not get a fault until you try to return from
// user space on that CPU.
//
// Ashish
thiscpu->cpu_ts.ts_esp0 = KSTACKTOP - thiscpu->cpu_id * (KSTKSIZE + KSTKGAP);
SETTSS((struct SystemSegdesc64 *)(&(gdt[(GD_TSS0 >> 3)+thiscpu->cpu_id * 2])), // We want the TSS0 at 0x28, TSS1 at 0x38, TSS2 at 0x48, etc
// The size of gdt is 2*NCPU+5 because - 2bytes for tss of each cpu
// Initialize the TSS slot of the gdt.
STS_T64A, (uint64_t) (&(thiscpu->cpu_ts)), sizeof(struct Taskstate), 0);
// Load the TSS selector (like other segment selectors, the
// bottom three bits are special; we leave them 0)
ltr(GD_TSS0+(thiscpu->cpu_id * 8 * 2)); // Byte offset of TSSs
// Load the IDT
lidt(&idt_pd);
}
void
idtinit(void)
{
lidt(idt, sizeof(idt));
}
/* Check if MAGIC is valid and print the Multiboot information structure
pointed by ADDR. */
void
entry (unsigned long magic, unsigned long addr)
{
multiboot_info_t *mbi;
/* Clear the screen. */
clear();
paging_init();
/* Am I booted by a Multiboot-compliant boot loader? */
if (magic != MULTIBOOT_BOOTLOADER_MAGIC)
{
printf ("Invalid magic number: 0x%#x\n", (unsigned) magic);
return;
}
/* Set MBI to the address of the Multiboot information structure. */
mbi = (multiboot_info_t *) addr;
/* Print out the flags. */
printf ("flags = 0x%#x\n", (unsigned) mbi->flags);
/* Are mem_* valid? */
if (CHECK_FLAG (mbi->flags, 0))
printf ("mem_lower = %uKB, mem_upper = %uKB\n",
(unsigned) mbi->mem_lower, (unsigned) mbi->mem_upper);
/* Is boot_device valid? */
if (CHECK_FLAG (mbi->flags, 1))
printf ("boot_device = 0x%#x\n", (unsigned) mbi->boot_device);
/* Is the command line passed? */
if (CHECK_FLAG (mbi->flags, 2))
printf ("cmdline = %s\n", (char *) mbi->cmdline);
if (CHECK_FLAG (mbi->flags, 3)) {
int mod_count = 0;
int i;
module_t* mod = (module_t*)mbi->mods_addr;
while(mod_count < mbi->mods_count) {
printf("Module %d loaded at address: 0x%#x\n", mod_count, (unsigned int)mod->mod_start);
printf("Module %d ends at address: 0x%#x\n", mod_count, (unsigned int)mod->mod_end);
printf("First few bytes of module:\n");
for(i = 0; i<16; i++) {
printf("0x%x ", *((char*)(mod->mod_start+i)));
}
printf("\n");
mod_count++;
}
}
/* Bits 4 and 5 are mutually exclusive! */
if (CHECK_FLAG (mbi->flags, 4) && CHECK_FLAG (mbi->flags, 5))
{
printf ("Both bits 4 and 5 are set.\n");
return;
}
/* Is the section header table of ELF valid? */
if (CHECK_FLAG (mbi->flags, 5))
{
elf_section_header_table_t *elf_sec = &(mbi->elf_sec);
printf ("elf_sec: num = %u, size = 0x%#x,"
" addr = 0x%#x, shndx = 0x%#x\n",
(unsigned) elf_sec->num, (unsigned) elf_sec->size,
(unsigned) elf_sec->addr, (unsigned) elf_sec->shndx);
}
/* Are mmap_* valid? */
if (CHECK_FLAG (mbi->flags, 6))
{
memory_map_t *mmap;
printf ("mmap_addr = 0x%#x, mmap_length = 0x%x\n",
(unsigned) mbi->mmap_addr, (unsigned) mbi->mmap_length);
for (mmap = (memory_map_t *) mbi->mmap_addr;
(unsigned long) mmap < mbi->mmap_addr + mbi->mmap_length;
mmap = (memory_map_t *) ((unsigned long) mmap
+ mmap->size + sizeof (mmap->size)))
printf (" size = 0x%x, base_addr = 0x%#x%#x\n"
" type = 0x%x, length = 0x%#x%#x\n",
(unsigned) mmap->size,
(unsigned) mmap->base_addr_high,
(unsigned) mmap->base_addr_low,
(unsigned) mmap->type,
(unsigned) mmap->length_high,
(unsigned) mmap->length_low);
}
/* Construct an LDT entry in the GDT */
{
seg_desc_t the_ldt_desc;
the_ldt_desc.granularity = 0;
the_ldt_desc.opsize = 1;
the_ldt_desc.reserved = 0;
the_ldt_desc.avail = 0;
the_ldt_desc.present = 1;
the_ldt_desc.dpl = 0x0;
the_ldt_desc.sys = 0;
the_ldt_desc.type = 0x2;
SET_LDT_PARAMS(the_ldt_desc, &ldt, ldt_size);
ldt_desc_ptr = the_ldt_desc;
lldt(KERNEL_LDT);
}
/* Construct a TSS entry in the GDT */
{
seg_desc_t the_tss_desc;
the_tss_desc.granularity = 0;
the_tss_desc.opsize = 0;
the_tss_desc.reserved = 0;
the_tss_desc.avail = 0;
the_tss_desc.seg_lim_19_16 = TSS_SIZE & 0x000F0000;
the_tss_desc.present = 1;
the_tss_desc.dpl = 0x0;
the_tss_desc.sys = 0;
the_tss_desc.type = 0x9;
the_tss_desc.seg_lim_15_00 = TSS_SIZE & 0x0000FFFF;
SET_TSS_PARAMS(the_tss_desc, &tss, tss_size);
tss_desc_ptr = the_tss_desc;
tss.ldt_segment_selector = KERNEL_LDT;
tss.ss0 = KERNEL_DS;
tss.esp0 = 0x800000;
ltr(KERNEL_TSS);
}
idt_desc_t interrupt;
interrupt.seg_selector = KERNEL_CS;
interrupt.dpl = 0;
interrupt.size = 1;
interrupt.reserved0 = 0;
interrupt.reserved1 = 1;
interrupt.reserved2 = 1;
interrupt.reserved3 = 0;
interrupt.reserved4 = 0;
interrupt.present = 1;
idt_desc_t divide_error_desc = interrupt;
SET_IDT_ENTRY(divide_error_desc, divide_error);
idt[0] = divide_error_desc;
idt_desc_t reserved_desc = interrupt;
SET_IDT_ENTRY(reserved_desc, reserved);
idt[1] = reserved_desc;
idt_desc_t nmi_interrupt_desc = interrupt;
SET_IDT_ENTRY(nmi_interrupt_desc, nmi_interrupt);
idt[2] = nmi_interrupt_desc;
idt_desc_t breakpoint_desc = interrupt;
SET_IDT_ENTRY(breakpoint_desc, breakpoint);
idt[3] = breakpoint_desc;
idt_desc_t overflow_desc = interrupt;
SET_IDT_ENTRY(overflow_desc, overflow);
idt[4] = overflow_desc;
idt_desc_t bound_range_exceeded_desc = interrupt;
SET_IDT_ENTRY(bound_range_exceeded_desc, bound_range_exceeded);
idt[5] = bound_range_exceeded_desc;
idt_desc_t invalid_opcode_desc = interrupt;
SET_IDT_ENTRY(invalid_opcode_desc, invalid_opcode);
idt[6] = invalid_opcode_desc;
idt_desc_t device_not_available_desc = interrupt;
SET_IDT_ENTRY(device_not_available_desc, device_not_available);
idt[7] = device_not_available_desc;
idt_desc_t double_fault_desc = interrupt;
SET_IDT_ENTRY(double_fault_desc, double_fault);
idt[8] = double_fault_desc;
idt_desc_t coprocessor_segment_overrun_desc = interrupt;
SET_IDT_ENTRY(coprocessor_segment_overrun_desc, coprocessor_segment_overrun);
idt[9] = divide_error_desc;
idt_desc_t invalid_tss_desc = interrupt;
SET_IDT_ENTRY(invalid_tss_desc, invalid_tss);
idt[10] = invalid_tss_desc;
idt_desc_t segment_not_present_desc = interrupt;
segment_not_present_desc.present = 0;
SET_IDT_ENTRY(segment_not_present_desc, segment_not_present);
idt[11] = segment_not_present_desc;
idt_desc_t stack_segment_fault_desc = interrupt;
SET_IDT_ENTRY(stack_segment_fault_desc, stack_segment_fault);
idt[12] = stack_segment_fault_desc;
idt_desc_t general_protection_desc = interrupt;
SET_IDT_ENTRY(general_protection_desc, general_protection);
idt[13] = general_protection_desc;
idt_desc_t page_fault_desc = interrupt;
SET_IDT_ENTRY(page_fault_desc, page_fault);
idt[14] = page_fault_desc;
idt_desc_t math_fault_desc = interrupt;
SET_IDT_ENTRY(math_fault_desc, math_fault);
idt[16] = math_fault_desc;
idt_desc_t alignment_check_desc = interrupt;
SET_IDT_ENTRY(alignment_check_desc, alignment_check);
idt[17] = alignment_check_desc;
idt_desc_t machine_check_desc = interrupt;
SET_IDT_ENTRY(machine_check_desc, machine_check);
idt[18] = machine_check_desc;
idt_desc_t simd_desc = interrupt;
SET_IDT_ENTRY(simd_desc, simd_floating_exception);
idt[19] = simd_desc;
idt_desc_t keyboard_desc = interrupt;
SET_IDT_ENTRY(keyboard_desc, &keyboard_wrapper);
idt[0x21] = keyboard_desc;
idt_desc_t rtc_desc = interrupt;
SET_IDT_ENTRY(rtc_desc, &rtc_wrapper);
idt[0x28] = rtc_desc;
// load idt
lidt(idt_desc_ptr);
/* Init the PIC */
i8259_init();
/* Initialize devices, memory, filesystem, enable device interrupts on the
* PIC, any other initialization stuff... */
// initialize rtc
rtc_init();
// enable irq1 for keyboard
enable_irq(1);
/* Enable interrupts */
/* Do not enable the following until after you have set up your
* IDT correctly otherwise QEMU will triple fault and simple close
* without showing you any output */
printf("Enabling Interrupts\n");
sti();
int freq = 0x0010;
write_rtc((char *) (&freq));
// while(1) {
// printf("h");
// read_rtc();
// }
// int x = 3 / 0;
// int * x = 0x12345000;
// int y;
// y = *x;
/* Execute the first program (`shell') ... */
/* Spin (nicely, so we don't chew up cycles) */
asm volatile(".1: hlt; jmp .1;");
}
/* Check if MAGIC is valid and print the Multiboot information structure
pointed by ADDR. */
void
entry (unsigned long magic, unsigned long addr)
{
multiboot_info_t *mbi;
/* Clear the screen. */
clear();
uint32_t filestart;
/* Am I booted by a Multiboot-compliant boot loader? */
if (magic != MULTIBOOT_BOOTLOADER_MAGIC)
{
printf ("Invalid magic number: 0x%#x\n", (unsigned) magic);
return;
}
/* Set MBI to the address of the Multiboot information structure. */
mbi = (multiboot_info_t *) addr;
/* Print out the flags. */
printf ("flags = 0x%#x\n", (unsigned) mbi->flags);
/* Are mem_* valid? */
if (CHECK_FLAG (mbi->flags, 0))
printf ("mem_lower = %uKB, mem_upper = %uKB\n",
(unsigned) mbi->mem_lower, (unsigned) mbi->mem_upper);
/* Is boot_device valid? */
if (CHECK_FLAG (mbi->flags, 1))
printf ("boot_device = 0x%#x\n", (unsigned) mbi->boot_device);
/* Is the command line passed? */
if (CHECK_FLAG (mbi->flags, 2))
printf ("cmdline = %s\n", (char *) mbi->cmdline);
if (CHECK_FLAG (mbi->flags, 3)) {
int mod_count = 0;
int i;
module_t* mod = (module_t*)mbi->mods_addr;
while(mod_count < mbi->mods_count) {
printf("Module %d loaded at address: 0x%#x\n", mod_count, (unsigned int)mod->mod_start);
filestart = mod->mod_start;
printf("Module %d ends at address: 0x%#x\n", mod_count, (unsigned int)mod->mod_end);
printf("First few bytes of module:\n");
for(i = 0; i<16; i++) {
printf("0x%x ", *((char*)(mod->mod_start+i)));
}
printf("\n");
mod_count++;
}
}
/* Bits 4 and 5 are mutually exclusive! */
if (CHECK_FLAG (mbi->flags, 4) && CHECK_FLAG (mbi->flags, 5))
{
printf ("Both bits 4 and 5 are set.\n");
return;
}
/* Is the section header table of ELF valid? */
if (CHECK_FLAG (mbi->flags, 5))
{
elf_section_header_table_t *elf_sec = &(mbi->elf_sec);
printf ("elf_sec: num = %u, size = 0x%#x,"
" addr = 0x%#x, shndx = 0x%#x\n",
(unsigned) elf_sec->num, (unsigned) elf_sec->size,
(unsigned) elf_sec->addr, (unsigned) elf_sec->shndx);
}
/* Are mmap_* valid? */
if (CHECK_FLAG (mbi->flags, 6))
{
memory_map_t *mmap;
printf ("mmap_addr = 0x%#x, mmap_length = 0x%x\n",
(unsigned) mbi->mmap_addr, (unsigned) mbi->mmap_length);
for (mmap = (memory_map_t *) mbi->mmap_addr;
(unsigned long) mmap < mbi->mmap_addr + mbi->mmap_length;
mmap = (memory_map_t *) ((unsigned long) mmap
+ mmap->size + sizeof (mmap->size)))
printf (" size = 0x%x, base_addr = 0x%#x%#x\n"
" type = 0x%x, length = 0x%#x%#x\n",
(unsigned) mmap->size,
(unsigned) mmap->base_addr_high,
(unsigned) mmap->base_addr_low,
(unsigned) mmap->type,
(unsigned) mmap->length_high,
(unsigned) mmap->length_low);
}
/* Construct an LDT entry in the GDT */
{
seg_desc_t the_ldt_desc;
the_ldt_desc.granularity = 0;
the_ldt_desc.opsize = 1;
the_ldt_desc.reserved = 0;
the_ldt_desc.avail = 0;
the_ldt_desc.present = 1;
the_ldt_desc.dpl = 0x0;
the_ldt_desc.sys = 0;
the_ldt_desc.type = 0x2;
SET_LDT_PARAMS(the_ldt_desc, &ldt, ldt_size);
ldt_desc_ptr = the_ldt_desc;
lldt(KERNEL_LDT);
}
/* Construct a TSS entry in the GDT */
{
seg_desc_t the_tss_desc;
the_tss_desc.granularity = 0;
the_tss_desc.opsize = 0;
the_tss_desc.reserved = 0;
the_tss_desc.avail = 0;
the_tss_desc.seg_lim_19_16 = TSS_SIZE & 0x000F0000;
the_tss_desc.present = 1;
the_tss_desc.dpl = 0x0;
the_tss_desc.sys = 0;
the_tss_desc.type = 0x9;
the_tss_desc.seg_lim_15_00 = TSS_SIZE & 0x0000FFFF;
SET_TSS_PARAMS(the_tss_desc, &tss, tss_size);
tss_desc_ptr = the_tss_desc;
tss.ldt_segment_selector = KERNEL_LDT;
tss.ss0 = KERNEL_DS;
tss.esp0 = 0x800000;
ltr(KERNEL_TSS);
}
//Initialization of IDE
{
printf("Initilization of Idt table...");
set_trap_gate(0,divide_error);
set_trap_gate(1,debug);
set_intr_gate(2,nmi);
set_system_intr_gate(3,int3);
set_system_gate(4,overflow);
set_system_gate(5,bounds);
set_trap_gate(6,invalid_op);
set_trap_gate(7,device_not_available);
set_task_gate(8,31);
set_trap_gate(9,coprocessor_segment_overrun);
set_trap_gate(10,invalid_TSS);
set_trap_gate(11,segment_not_present);
set_trap_gate(12,stack_segment);
set_trap_gate(13,general_protection);
set_trap_gate(14,page_fault);//intr
set_trap_gate(16,coprocessor_error);
set_trap_gate(17,alignment_check);
set_trap_gate(18,machine_check);
set_trap_gate(19,simd_coprocessor_error);
set_system_gate(128,system_call);
set_intr_gate(32,irq0); //intr
set_intr_gate(33,irq1); //intr
set_intr_gate(34,0); //intr
set_intr_gate(40,irq8); //intr
//set_intr_gate(44,irq12); //intr
lidt(idt_desc_ptr);
printf("ok!\n");
}
// Init the PIC
i8259_init();
//Enable interrupts
enable_irq(1);
enable_irq(2);
open_rtc();
enable_irq(8);
enable_irq(12);
uint8_t file =0x00;
//Enable paging
printf("Enabling paging...\n");
paging();
printf("ok!\n");
//Restore interrupts
sti();
//Mounting file system
printf("Mounting filesystem...\n");
open_terminal(&file);
setstart(filestart);
printf("ok!\n");
//clear();
//Executing first program shell
uint8_t cmd[10]={"shell "};
#if debug_by_showing_dentries
test_dentries();
while(1);
#endif
test_system_call((int32_t)cmd, NULL, 0, 2);
asm volatile(".1: hlt; jmp .1;");
}
/* Check if MAGIC is valid and print the Multiboot information structure
pointed by ADDR. */
void
entry (unsigned long magic, unsigned long addr)
{
multiboot_info_t *mbi;
uint8_t* filesystem_address;
/* Clear the screen. */
clear();
/* Am I booted by a Multiboot-compliant boot loader? */
if (magic != MULTIBOOT_BOOTLOADER_MAGIC)
{
printf ("Invalid magic number: 0x%#x\n", (unsigned) magic);
return;
}
/* Set MBI to the address of the Multiboot information structure. */
mbi = (multiboot_info_t *) addr;
/* Print out the flags. */
printf ("flags = 0x%#x\n", (unsigned) mbi->flags);
/* Are mem_* valid? */
if (CHECK_FLAG (mbi->flags, 0))
printf ("mem_lower = %uKB, mem_upper = %uKB\n",
(unsigned) mbi->mem_lower, (unsigned) mbi->mem_upper);
/* Is boot_device valid? */
if (CHECK_FLAG (mbi->flags, 1))
printf ("boot_device = 0x%#x\n", (unsigned) mbi->boot_device);
/* Is the command line passed? */
if (CHECK_FLAG (mbi->flags, 2))
printf ("cmdline = %s\n", (char *) mbi->cmdline);
if (CHECK_FLAG (mbi->flags, 3)) {
int mod_count = 0;
int i;
module_t* mod = (module_t*)mbi->mods_addr;
while(mod_count < mbi->mods_count) {
filesystem_address = (uint8_t*)mod->mod_start;
printf("Module %d loaded at address: 0x%#x\n", mod_count, (unsigned int)mod->mod_start);
printf("Module %d ends at address: 0x%#x\n", mod_count, (unsigned int)mod->mod_end);
printf("First few bytes of module:\n");
for(i = 0; i<16; i++) {
printf("0x%x ", *((char*)(mod->mod_start+i)));
}
printf("\n");
mod_count++;
mod++;
}
}
/* Bits 4 and 5 are mutually exclusive! */
if (CHECK_FLAG (mbi->flags, 4) && CHECK_FLAG (mbi->flags, 5))
{
printf ("Both bits 4 and 5 are set.\n");
return;
}
/* Is the section header table of ELF valid? */
if (CHECK_FLAG (mbi->flags, 5))
{
elf_section_header_table_t *elf_sec = &(mbi->elf_sec);
printf ("elf_sec: num = %u, size = 0x%#x,"
" addr = 0x%#x, shndx = 0x%#x\n",
(unsigned) elf_sec->num, (unsigned) elf_sec->size,
(unsigned) elf_sec->addr, (unsigned) elf_sec->shndx);
}
/* Are mmap_* valid? */
if (CHECK_FLAG (mbi->flags, 6))
{
memory_map_t *mmap;
printf ("mmap_addr = 0x%#x, mmap_length = 0x%x\n",
(unsigned) mbi->mmap_addr, (unsigned) mbi->mmap_length);
for (mmap = (memory_map_t *) mbi->mmap_addr;
(unsigned long) mmap < mbi->mmap_addr + mbi->mmap_length;
mmap = (memory_map_t *) ((unsigned long) mmap
+ mmap->size + sizeof (mmap->size)))
printf (" size = 0x%x, base_addr = 0x%#x%#x\n"
" type = 0x%x, length = 0x%#x%#x\n",
(unsigned) mmap->size,
(unsigned) mmap->base_addr_high,
(unsigned) mmap->base_addr_low,
(unsigned) mmap->type,
(unsigned) mmap->length_high,
(unsigned) mmap->length_low);
}
/* Construct an LDT entry in the GDT */
{
seg_desc_t the_ldt_desc;
the_ldt_desc.granularity = 0;
the_ldt_desc.opsize = 1;
the_ldt_desc.reserved = 0;
the_ldt_desc.avail = 0;
the_ldt_desc.present = 1;
the_ldt_desc.dpl = 0x0;
the_ldt_desc.sys = 0;
the_ldt_desc.type = 0x2;
SET_LDT_PARAMS(the_ldt_desc, &ldt, ldt_size);
ldt_desc_ptr = the_ldt_desc;
lldt(KERNEL_LDT);
}
/* Construct a TSS entry in the GDT */
{
seg_desc_t the_tss_desc;
the_tss_desc.granularity = 0;
the_tss_desc.opsize = 0;
the_tss_desc.reserved = 0;
the_tss_desc.avail = 0;
the_tss_desc.seg_lim_19_16 = TSS_SIZE & 0x000F0000;
the_tss_desc.present = 1;
the_tss_desc.dpl = 0x0;
the_tss_desc.sys = 0;
the_tss_desc.type = 0x9;
the_tss_desc.seg_lim_15_00 = TSS_SIZE & 0x0000FFFF;
SET_TSS_PARAMS(the_tss_desc, &tss, tss_size);
tss_desc_ptr = the_tss_desc;
tss.ldt_segment_selector = KERNEL_LDT;
tss.ss0 = KERNEL_DS;
tss.esp0 = 0x800000;
ltr(KERNEL_TSS);
}
int z = 0;
reset_scr();
//set the IDT
set_idt();
lidt(idt_desc_ptr);
/* Init the PIC */
i8259_init();
/* Initialize devices, memory, filesystem, enable device interrupts on the
* PIC, any other initialization stuff... */
//init paging
init_paging();
//init filesystem
init_filesys(filesystem_address);
//init keyboard
init_keyboard();
//init the rtc
init_rtc();
//init the mouse
init_mouse();
//clear the screen
reset_scr();
// boot_screen();
for(z = 0; z < 3; z++)
{
terminal_init();
}
node* buffer = screens[0];
reset_buf(buffer);
//display the status bar
/* Enable interrupts */
sti();
/* Do not enable the following until after you have set up your
* IDT correctly otherwise QEMU will triple fault and simple close
* without showing you any output */
boot_screen();
//sample mario sound
for(z = 0; z < 500000; z++)
play_sound(1000);
for(z = 0; z < 500000; z++)
play_sound(100);
for(z = 0; z < 500000; z++)
play_sound(900);
for(z = 0; z < 50000; z++)
play_sound(200);
for(z = 0; z < 500000; z++)
play_sound(800);
for(z = 0; z < 500000; z++)
play_sound(300);
for(z = 0; z < 500000; z++)
play_sound(700);
for(z = 0; z < 500000; z++)
play_sound(400);
for(z = 0; z < 500000; z++)
play_sound(600);
for(z = 0; z < 500000; z++)
play_sound(500);
for(z = 0; z < 500000; z++)
play_sound(500);
for(z = 0; z < 500000; z++)
play_sound(1000);
for(z = 0; z < 500000; z++)
play_sound(400);
for(z = 0; z < 500000; z++)
play_sound(300);
for(z = 0; z < 500000; z++)
play_sound(300);
for(z = 0; z < 500000; z++)
play_sound(200);
//boot_screen();
nosound();
reset_scr();
//init PIT for sound, timer
init_pit(0, 100);
/////////////////////////////////////////////////////////////
// void imperial();
status_bar();
/* Execute the first program (`shell') ... */
uint8_t fname[33] = "shell";
execute(fname);
/* We should never get to this point */
//printf("Initial shell halted.");
/* Spin (nicely, so we don't chew up cycles) */
asm volatile(".1: hlt; jmp .1;");
}
