/*
* Delete operator.
*
* Hard case of deleting a range where both wcursor and wdot
* are specified is treated as a special case of change and handled
* by vchange (although vchange may pass it back if it degenerates
* to a full line range delete.)
*/
void
vdelete(int c)
{
register char *cp;
register int i;
if (wdot) {
if (wcursor) {
vchange(EOF);
return;
}
if ((i = xdw()) < 0)
return;
if (state != VISUAL) {
vgoto(LINE(0), 0);
vputchar('@');
}
wdot = dot;
vremote(i, delete, 0);
notenam = "delete";
DEL[0] = 0;
killU();
vreplace(vcline, i, 0);
if (wdot > dol)
vcline--;
vrepaint(NOSTR);
return;
}
if (wcursor < linebuf)
wcursor = linebuf;
if (cursor == wcursor) {
beep();
return;
}
i = vdcMID();
cp = cursor;
setDEL();
CP(cp, wcursor);
if (cp > linebuf && (cp[0] == 0 || c == '#'))
cp--;
if (state == HARDOPEN) {
bleep(i, cp);
cursor = cp;
return;
}
physdc(column(cursor + skipleft(linebuf, cursor)), i);
DEPTH(vcline) = 0;
vreopen(LINE(vcline), lineDOT(), vcline);
vsyncCL();
vsetcurs(cp);
}
/*
* Start harcopy open.
* Print an image of the line to the left of the cursor
* under the full print of the line and position the cursor.
* If we are in a scroll ^D within hardcopy open then all this
* is suppressed.
*/
void
sethard(void)
{
if (state == VISUAL)
return;
rubble = 0;
state = HARDOPEN;
if (hold & HOLDROL)
return;
vup1();
LINE(0) = WBOT;
if (Pline == numbline)
vgoto(WBOT, 0), printf("%6d ", lineDOT());
}
void
vappend(int ch, int cnt, int indent)
{
register int i;
register char *gcursor;
bool escape;
int repcnt;
short oldhold = hold;
/*
* Before a move in hardopen when the line is dirty
* or we are in the middle of the printed representation,
* we retype the line to the left of the cursor so the
* insert looks clean.
*/
if (ch != 'o' && state == HARDOPEN && (rubble || !ateopr())) {
rubble = 1;
wcursor = cursor;
vmove();
}
vaifirst = indent == 0;
/*
* Handle replace character by (eventually)
* limiting the number of input characters allowed
* in the vgetline routine.
*/
if (ch == 'r')
repcnt = 2;
else
repcnt = 0;
/*
* If an autoindent is specified, then
* generate a mixture of blanks to tabs to implement
* it and place the cursor after the indent.
* Text read by the vgetline routine will be placed in genbuf,
* so the indent is generated there.
*/
if (value(AUTOINDENT) && indent != 0) {
gcursor = genindent(indent);
*gcursor = 0;
vgotoCL(qcolumn(cursor - 1, genbuf));
} else {
gcursor = genbuf;
*gcursor = 0;
if (ch == 'o')
vfixcurs();
}
/*
* Prepare for undo. Pointers delimit inserted portion of line.
*/
vUA1 = vUA2 = cursor;
/*
* If we are not in a repeated command and a ^@ comes in
* then this means the previous inserted text.
* If there is none or it was too long to be saved,
* then beep() and also arrange to undo any damage done
* so far (e.g. if we are a change.)
*/
if ((vglobp && *vglobp == 0) || peekbr()) {
if ((INS[0] & (OVERBUF|TRIM)) == OVERBUF) {
beep();
if (!splitw)
ungetkey('u');
doomed = 0;
hold = oldhold;
return;
}
/*
* Unread input from INS.
* An escape will be generated at end of string.
* Hold off n^^2 type update on dumb terminals.
*/
vglobp = INS;
hold |= HOLDQIK;
} else if (vglobp == 0)
/*
* Not a repeated command, get
* a new inserted text for repeat.
*/
INS[0] = 0;
/*
* For wrapmargin to hack away second space after a '.'
* when the first space caused a line break we keep
* track that this happened in gobblebl, which says
* to gobble up a blank silently.
*/
gobblebl = 0;
/*
* Text gathering loop.
* New text goes into genbuf starting at gcursor.
* cursor preserves place in linebuf where text will eventually go.
*/
if (*cursor == 0 || state == CRTOPEN)
hold |= HOLDROL;
for (;;) {
if (ch == 'r' && repcnt == 0)
escape = 0;
else {
gcursor = vgetline(repcnt, gcursor, &escape);
/*
* After an append, stick information
* about the ^D's and ^^D's and 0^D's in
* the repeated text buffer so repeated
* inserts of stuff indented with ^D as backtab's
* can work.
*/
if (HADUP)
addtext("^");
else if (HADZERO)
addtext("0");
while (CDCNT > 0)
addtext("\204"), CDCNT--;
if (gobbled)
addtext(" ");
addtext(ogcursor);
}
repcnt = 0;
/*
* Smash the generated and preexisting indents together
* and generate one cleanly made out of tabs and spaces
* if we are using autoindent.
*/
if (!vaifirst && value(AUTOINDENT)) {
i = fixindent(indent);
if (!HADUP)
indent = i;
gcursor = strend(genbuf);
}
/*
* Limit the repetition count based on maximum
* possible line length; do output implied
* by further count (> 1) and cons up the new line
* in linebuf.
*/
cnt = vmaxrep(ch, cnt);
CP(gcursor + 1, cursor);
do {
CP(cursor, genbuf);
if (cnt > 1) {
int oldhold = hold;
Outchar = vinschar;
hold |= HOLDQIK;
ex_printf("%s", genbuf);
hold = oldhold;
Outchar = vputchar;
}
cursor += gcursor - genbuf;
} while (--cnt > 0);
endim();
vUA2 = cursor;
if (escape != '\n')
CP(cursor, gcursor + 1);
/*
* If doomed characters remain, clobber them,
* and reopen the line to get the display exact.
*/
if (state != HARDOPEN) {
DEPTH(vcline) = 0;
if (doomed > 0) {
register int cind = cindent();
physdc(cind, cind + doomed);
doomed = 0;
}
i = vreopen(LINE(vcline), lineDOT(), vcline);
}
/*
* All done unless we are continuing on to another line.
*/
if (escape != '\n')
break;
/*
* Set up for the new line.
* First save the current line, then construct a new
* first image for the continuation line consisting
* of any new autoindent plus the pushed ahead text.
*/
killU();
addtext(gobblebl ? " " : "\n");
vsave();
cnt = 1;
if (value(AUTOINDENT)) {
#ifdef LISP
if (value(LISP))
indent = lindent(dot + 1);
else
#endif
if (!HADUP && vaifirst)
indent = whitecnt(linebuf);
vaifirst = 0;
strcLIN(vpastwh(gcursor + 1));
gcursor = genindent(indent);
*gcursor = 0;
if (gcursor + strlen(linebuf) > &genbuf[LBSIZE - 2])
gcursor = genbuf;
CP(gcursor, linebuf);
} else {
CP(genbuf, gcursor + 1);
gcursor = genbuf;
}
/*
* If we started out as a single line operation and are now
* turning into a multi-line change, then we had better yank
* out dot before it changes so that undo will work
* correctly later.
*/
if (vundkind == VCHNG) {
vremote(1, (void (*)(int))yank, 0);
undap1--;
}
/*
* Now do the append of the new line in the buffer,
* and update the display. If slowopen
* we don't do very much.
*/
vdoappend(genbuf);
vundkind = VMANYINS;
vcline++;
if (state != VISUAL)
vshow(dot, NOLINE);
else {
i += LINE(vcline - 1);
vopen(dot, i);
if (value(SLOWOPEN))
vscrap();
else
vsync1(LINE(vcline));
}
strcLIN(gcursor);
*gcursor = 0;
cursor = linebuf;
vgotoCL(qcolumn(cursor - 1, genbuf));
}
/*
* All done with insertion, position the cursor
* and sync the screen.
*/
hold = oldhold;
if (cursor > linebuf)
cursor--;
if (state != HARDOPEN)
vsyncCL();
else if (cursor > linebuf)
back1();
doomed = 0;
wcursor = cursor;
vmove();
}
vmain()
{
register int c, cnt, i;
char esave[TUBECOLS];
char *oglobp;
char d;
line *addr;
int ind, nlput;
int shouldpo = 0;
int onumber, olist, (*OPline)(), (*OPutchar)();
vch_mac = VC_NOTINMAC;
/*
* If we started as a vi command (on the command line)
* then go process initial commands (recover, next or tag).
*/
if (initev) {
oglobp = globp;
globp = initev;
hadcnt = cnt = 0;
i = tchng;
addr = dot;
goto doinit;
}
/*
* NB:
*
* The current line is always in the line buffer linebuf,
* and the cursor at the position cursor. You should do
* a vsave() before moving off the line to make sure the disk
* copy is updated if it has changed, and a getDOT() to get
* the line back if you mung linebuf. The motion
* routines in ex_vwind.c handle most of this.
*/
for (;;) {
/*
* Decode a visual command.
* First sync the temp file if there has been a reasonable
* amount of change. Clear state for decoding of next
* command.
*/
TSYNC();
vglobp = 0;
vreg = 0;
hold = 0;
seenprompt = 1;
wcursor = 0;
Xhadcnt = hadcnt = 0;
Xcnt = cnt = 1;
splitw = 0;
if (i = holdupd) {
if (state == VISUAL)
ignore(peekkey());
holdupd = 0;
/*
if (LINE(0) < ZERO) {
vclear();
vcnt = 0;
i = 3;
}
*/
if (state != VISUAL) {
vcnt = 0;
vsave();
vrepaint(cursor);
} else if (i == 3)
vredraw(WTOP);
else
vsync(WTOP);
vfixcurs();
}
/*
* Gobble up counts and named buffer specifications.
*/
for (;;) {
looptop:
#ifdef MDEBUG
if (trace)
fprintf(trace, "pc=%c",peekkey());
#endif
if (isdigit(peekkey()) && peekkey() != '0') {
hadcnt = 1;
cnt = vgetcnt();
forbid (cnt <= 0);
}
if (peekkey() != '"')
break;
ignore(getkey()), c = getkey();
/*
* Buffer names be letters or digits.
* But not '0' as that is the source of
* an 'empty' named buffer spec in the routine
* kshift (see ex_temp.c).
*/
forbid (c == '0' || !isalpha(c) && !isdigit(c));
vreg = c;
}
reread:
/*
* Come to reread from below after some macro expansions.
* The call to map allows use of function key pads
* by performing a terminal dependent mapping of inputs.
*/
#ifdef MDEBUG
if (trace)
fprintf(trace,"pcb=%c,",peekkey());
#endif
op = getkey();
maphopcnt = 0;
do {
/*
* Keep mapping the char as long as it changes.
* This allows for double mappings, e.g., q to #,
* #1 to something else.
*/
c = op;
op = map(c,arrows);
#ifdef MDEBUG
if (trace)
fprintf(trace,"pca=%c,",c);
#endif
/*
* Maybe the mapped to char is a count. If so, we have
* to go back to the "for" to interpret it. Likewise
* for a buffer name.
*/
if ((isdigit(c) && c!='0') || c == '"') {
ungetkey(c);
goto looptop;
}
if (!value(REMAP)) {
c = op;
break;
}
if (++maphopcnt > 256)
error("Infinite macro loop");
} while (c != op);
/*
* Begin to build an image of this command for possible
* later repeat in the buffer workcmd. It will be copied
* to lastcmd by the routine setLAST
* if/when completely specified.
*/
lastcp = workcmd;
if (!vglobp)
*lastcp++ = c;
/*
* First level command decode.
*/
switch (c) {
/*
* ^L Clear screen e.g. after transmission error.
*/
/*
* ^R Retype screen, getting rid of @ lines.
* If in open, equivalent to ^L.
* On terminals where the right arrow key sends
* ^L we make ^R act like ^L, since there is no
* way to get ^L. These terminals (adm31, tvi)
* are intelligent so ^R is useless. Soroc
* will probably foul this up, but nobody has
* one of them.
*/
case CTRL(l):
case CTRL(r):
if (c == CTRL(l) || (KR && *KR==CTRL(l))) {
vclear();
vdirty(0, vcnt);
}
if (state != VISUAL) {
/*
* Get a clean line, throw away the
* memory of what is displayed now,
* and move back onto the current line.
*/
vclean();
vcnt = 0;
vmoveto(dot, cursor, 0);
continue;
}
vredraw(WTOP);
/*
* Weird glitch -- when we enter visual
* in a very small window we may end up with
* no lines on the screen because the line
* at the top is too long. This forces the screen
* to be expanded to make room for it (after
* we have printed @'s ick showing we goofed).
*/
if (vcnt == 0)
vrepaint(cursor);
vfixcurs();
continue;
/*
* $ Escape just cancels the current command
* with a little feedback.
*/
case ESCAPE:
beep();
continue;
/*
* @ Macros. Bring in the macro and put it
* in vmacbuf, point vglobp there and punt.
*/
case '@':
c = getesc();
if (c == 0)
continue;
if (c == '@')
c = lastmac;
if (isupper(c))
c = tolower(c);
forbid(!islower(c));
lastmac = c;
vsave();
CATCH
char tmpbuf[BUFSIZ];
regbuf(c,tmpbuf,sizeof(vmacbuf));
macpush(tmpbuf, 1);
ONERR
lastmac = 0;
splitw = 0;
getDOT();
vrepaint(cursor);
continue;
ENDCATCH
vmacp = vmacbuf;
goto reread;
/*
* . Repeat the last (modifying) open/visual command.
*/
case '.':
/*
* Check that there was a last command, and
* take its count and named buffer unless they
* were given anew. Special case if last command
* referenced a numeric named buffer -- increment
* the number and go to a named buffer again.
* This allows a sequence like "1pu.u.u...
* to successively look for stuff in the kill chain
* much as one does in EMACS with C-Y and M-Y.
*/
forbid (lastcmd[0] == 0);
if (hadcnt)
lastcnt = cnt;
if (vreg)
lastreg = vreg;
else if (isdigit(lastreg) && lastreg < '9')
lastreg++;
vreg = lastreg;
cnt = lastcnt;
hadcnt = lasthad;
vglobp = lastcmd;
goto reread;
/*
* ^U Scroll up. A count sticks around for
* future scrolls as the scroll amount.
* Attempt to hold the indentation from the
* top of the screen (in logical lines).
*
* BUG: A ^U near the bottom of the screen
* on a dumb terminal (which can't roll back)
* causes the screen to be cleared and then
* redrawn almost as it was. In this case
* one should simply move the cursor.
*/
case CTRL(u):
if (hadcnt)
vSCROLL = cnt;
cnt = vSCROLL;
if (state == VISUAL)
ind = vcline, cnt += ind;
else
ind = 0;
vmoving = 0;
vup(cnt, ind, 1);
vnline(NOSTR);
continue;
/*
* ^D Scroll down. Like scroll up.
*/
case CTRL(d):
#ifdef TRACE
if (trace)
fprintf(trace, "before vdown in ^D, dot=%d, wdot=%d, dol=%d\n", lineno(dot), lineno(wdot), lineno(dol));
#endif
if (hadcnt)
vSCROLL = cnt;
cnt = vSCROLL;
if (state == VISUAL)
ind = vcnt - vcline - 1, cnt += ind;
else
ind = 0;
vmoving = 0;
vdown(cnt, ind, 1);
#ifdef TRACE
if (trace)
fprintf(trace, "before vnline in ^D, dot=%d, wdot=%d, dol=%d\n", lineno(dot), lineno(wdot), lineno(dol));
#endif
vnline(NOSTR);
#ifdef TRACE
if (trace)
fprintf(trace, "after vnline in ^D, dot=%d, wdot=%d, dol=%d\n", lineno(dot), lineno(wdot), lineno(dol));
#endif
continue;
/*
* ^E Glitch the screen down (one) line.
* Cursor left on same line in file.
*/
case CTRL(e):
if (state != VISUAL)
continue;
if (!hadcnt)
cnt = 1;
/* Bottom line of file already on screen */
forbid(lineDOL()-lineDOT() <= vcnt-1-vcline);
ind = vcnt - vcline - 1 + cnt;
vdown(ind, ind, 1);
vnline(cursor);
continue;
/*
* ^Y Like ^E but up
*/
case CTRL(y):
if (state != VISUAL)
continue;
if (!hadcnt)
cnt = 1;
forbid(lineDOT()-1<=vcline); /* line 1 already there */
ind = vcline + cnt;
vup(ind, ind, 1);
vnline(cursor);
continue;
/*
* m Mark position in mark register given
* by following letter. Return is
* accomplished via ' or `; former
* to beginning of line where mark
* was set, latter to column where marked.
*/
case 'm':
/*
* Getesc is generally used when a character
* is read as a latter part of a command
* to allow one to hit rubout/escape to cancel
* what you have typed so far. These characters
* are mapped to 0 by the subroutine.
*/
c = getesc();
if (c == 0)
continue;
/*
* Markreg checks that argument is a letter
* and also maps ' and ` to the end of the range
* to allow '' or `` to reference the previous
* context mark.
*/
c = markreg(c);
forbid (c == 0);
vsave();
names[c - 'a'] = (*dot &~ 01);
ncols[c - 'a'] = cursor;
anymarks = 1;
continue;
/*
* ^F Window forwards, with 2 lines of continuity.
* Count repeats.
*/
case CTRL(f):
vsave();
if (vcnt > 2) {
addr = dot + (vcnt - vcline) - 2 + (cnt-1)*basWLINES;
forbid(addr > dol);
dot = addr;
vcnt = vcline = 0;
}
vzop(0, 0, '+');
continue;
/*
* ^B Window backwards, with 2 lines of continuity.
* Inverse of ^F.
*/
case CTRL(b):
vsave();
if (one + vcline != dot && vcnt > 2) {
addr = dot - vcline - 2 + (cnt-1)*basWLINES;
forbid (addr <= zero);
dot = addr;
vcnt = vcline = 0;
}
vzop(0, 0, '^');
continue;
/*
* z Screen adjustment, taking a following character:
* z<CR> current line to top
* z<NL> like z<CR>
* z- current line to bottom
* also z+, z^ like ^F and ^B.
* A preceding count is line to use rather
* than current line. A count between z and
* specifier character changes the screen size
* for the redraw.
*
*/
case 'z':
if (state == VISUAL) {
i = vgetcnt();
if (i > 0)
vsetsiz(i);
c = getesc();
if (c == 0)
continue;
}
vsave();
vzop(hadcnt, cnt, c);
continue;
/*
* Y Yank lines, abbreviation for y_ or yy.
* Yanked lines can be put later if no
* changes intervene, or can be put in named
* buffers and put anytime in this session.
*/
case 'Y':
ungetkey('_');
c = 'y';
break;
/*
* J Join lines, 2 by default. Count is number
* of lines to join (no join operator sorry.)
*/
case 'J':
forbid (dot == dol);
if (cnt == 1)
cnt = 2;
if (cnt > (i = dol - dot + 1))
cnt = i;
vsave();
vmacchng(1);
setLAST();
cursor = strend(linebuf);
vremote(cnt, join, 0);
notenam = "join";
vmoving = 0;
killU();
vreplace(vcline, cnt, 1);
if (!*cursor && cursor > linebuf)
cursor--;
if (notecnt == 2)
notecnt = 0;
vrepaint(cursor);
continue;
/*
* S Substitute text for whole lines, abbrev for c_.
* Count is number of lines to change.
*/
case 'S':
ungetkey('_');
c = 'c';
break;
/*
* O Create a new line above current and accept new
* input text, to an escape, there.
* A count specifies, for dumb terminals when
* slowopen is not set, the number of physical
* line space to open on the screen.
*
* o Like O, but opens lines below.
*/
case 'O':
case 'o':
vmacchng(1);
voOpen(c, cnt);
continue;
/*
* C Change text to end of line, short for c$.
*/
case 'C':
if (*cursor) {
ungetkey('$'), c = 'c';
break;
}
goto appnd;
/*
* ~ Switch case of letter under cursor
*/
case '~':
{
char mbuf[4];
setLAST();
mbuf[0] = 'r';
mbuf[1] = *cursor;
mbuf[2] = cursor[1]==0 ? 0 : ' ';
mbuf[3] = 0;
if (isalpha(mbuf[1]))
mbuf[1] ^= ' '; /* toggle the case */
macpush(mbuf, 1);
}
continue;
/*
* A Append at end of line, short for $a.
*/
case 'A':
operate('$', 1);
appnd:
c = 'a';
/* fall into ... */
/*
* a Appends text after cursor. Text can continue
* through arbitrary number of lines.
*/
case 'a':
if (*cursor) {
if (state == HARDOPEN)
putchar(*cursor);
cursor++;
}
goto insrt;
/*
* I Insert at beginning of whitespace of line,
* short for ^i.
*/
case 'I':
operate('^', 1);
c = 'i';
/* fall into ... */
/*
* R Replace characters, one for one, by input
* (logically), like repeated r commands.
*
* BUG: This is like the typeover mode of many other
* editors, and is only rarely useful. Its
* implementation is a hack in a low level
* routine and it doesn't work very well, e.g.
* you can't move around within a R, etc.
*/
case 'R':
/* fall into... */
/*
* i Insert text to an escape in the buffer.
* Text is arbitrary. This command reminds of
* the i command in bare teco.
*/
case 'i':
insrt:
/*
* Common code for all the insertion commands.
* Save for redo, position cursor, prepare for append
* at command and in visual undo. Note that nothing
* is doomed, unless R when all is, and save the
* current line in a the undo temporary buffer.
*/
vmacchng(1);
setLAST();
vcursat(cursor);
prepapp();
vnoapp();
doomed = c == 'R' ? 10000 : 0;
if(FIXUNDO)
vundkind = VCHNG;
vmoving = 0;
CP(vutmp, linebuf);
/*
* If this is a repeated command, then suppress
* fake insert mode on dumb terminals which looks
* ridiculous and wastes lots of time even at 9600B.
*/
if (vglobp)
hold = HOLDQIK;
vappend(c, cnt, 0);
continue;
/*
* ^? An attention, normally a ^?, just beeps.
* If you are a vi command within ex, then
* two ATTN's will drop you back to command mode.
*/
case ATTN:
beep();
if (initev || peekkey() != ATTN)
continue;
/* fall into... */
/*
* ^\ A quit always gets command mode.
*/
case QUIT:
/*
* Have to be careful if we were called
* g/xxx/vi
* since a return will just start up again.
* So we simulate an interrupt.
*/
if (inglobal)
onintr();
/* fall into... */
#ifdef notdef
/*
* q Quit back to command mode, unless called as
* vi on command line in which case dont do it
*/
case 'q': /* quit */
if (initev) {
vsave();
CATCH
error("Q gets ex command mode, :q leaves vi");
ENDCATCH
splitw = 0;
getDOT();
vrepaint(cursor);
continue;
}
#endif
/* fall into... */
/*
* Q Is like q, but always gets to command mode
* even if command line invocation was as vi.
*/
case 'Q':
vsave();
/*
* If we are in the middle of a macro, throw away
* the rest and fix up undo.
* This code copied from getbr().
*/
if (vmacp) {
vmacp = 0;
if (inopen == -1) /* don't screw up undo for esc esc */
vundkind = VMANY;
inopen = 1; /* restore old setting now that macro done */
}
return;
/*
* ZZ Like :x
*/
case 'Z':
forbid(getkey() != 'Z');
oglobp = globp;
globp = "x";
vclrech(0);
goto gogo;
/*
* P Put back text before cursor or before current
* line. If text was whole lines goes back
* as whole lines. If part of a single line
* or parts of whole lines splits up current
* line to form many new lines.
* May specify a named buffer, or the delete
* saving buffers 1-9.
*
* p Like P but after rather than before.
*/
case 'P':
case 'p':
vmoving = 0;
#ifdef notdef
forbid (!vreg && value(UNDOMACRO) && inopen < 0);
#endif
/*
* If previous delete was partial line, use an
* append or insert to put it back so as to
* use insert mode on intelligent terminals.
*/
if (!vreg && DEL[0]) {
forbid ((DEL[0] & (QUOTE|TRIM)) == OVERBUF);
vglobp = DEL;
ungetkey(c == 'p' ? 'a' : 'i');
goto reread;
}
/*
* If a register wasn't specified, then make
* sure there is something to put back.
*/
forbid (!vreg && unddol == dol);
/*
* If we just did a macro the whole buffer is in
* the undo save area. We don't want to put THAT.
*/
forbid (vundkind == VMANY && undkind==UNDALL);
vsave();
vmacchng(1);
setLAST();
i = 0;
if (vreg && partreg(vreg) || !vreg && pkill[0]) {
/*
* Restoring multiple lines which were partial
* lines; will leave cursor in middle
* of line after shoving restored text in to
* split the current line.
*/
i++;
if (c == 'p' && *cursor)
cursor++;
} else {
/*
* In whole line case, have to back up dot
* for P; also want to clear cursor so
* cursor will eventually be positioned
* at the beginning of the first put line.
*/
cursor = 0;
if (c == 'P') {
dot--, vcline--;
c = 'p';
}
}
killU();
/*
* The call to putreg can potentially
* bomb since there may be nothing in a named buffer.
* We thus put a catch in here. If we didn't and
* there was an error we would end up in command mode.
*/
addr = dol; /* old dol */
CATCH
vremote(1, vreg ? putreg : put, vreg);
ONERR
if (vreg == -1) {
splitw = 0;
if (op == 'P')
dot++, vcline++;
goto pfixup;
}
ENDCATCH
splitw = 0;
nlput = dol - addr + 1;
if (!i) {
/*
* Increment undap1, undap2 to make up
* for their incorrect initialization in the
* routine vremote before calling put/putreg.
*/
if (FIXUNDO)
undap1++, undap2++;
vcline++;
nlput--;
/*
* After a put want current line first line,
* and dot was made the last line put in code
* run so far. This is why we increment vcline
* above and decrease dot here.
*/
dot -= nlput - 1;
}
#ifdef TRACE
if (trace)
fprintf(trace, "vreplace(%d, %d, %d), undap1=%d, undap2=%d, dot=%d\n", vcline, i, nlput, lineno(undap1), lineno(undap2), lineno(dot));
#endif
vreplace(vcline, i, nlput);
if (state != VISUAL) {
/*
* Special case in open mode.
* Force action on the screen when a single
* line is put even if it is identical to
* the current line, e.g. on YP; otherwise
* you can't tell anything happened.
*/
vjumpto(dot, cursor, '.');
continue;
}
pfixup:
vrepaint(cursor);
vfixcurs();
continue;
/*
* ^^ Return to previous file.
* Like a :e #, and thus can be used after a
* "No Write" diagnostic.
*/
case CTRL(^):
forbid (hadcnt);
vsave();
ckaw();
oglobp = globp;
if (value(AUTOWRITE))
globp = "e! #";
else
globp = "e #";
goto gogo;
/*
* ^] Takes word after cursor as tag, and then does
* tag command. Read ``go right to''.
*/
case CTRL(]):
grabtag();
oglobp = globp;
globp = "tag";
goto gogo;
/*
* & Like :&
*/
case '&':
oglobp = globp;
globp = "&";
goto gogo;
/*
* ^G Bring up a status line at the bottom of
* the screen, like a :file command.
*
* BUG: Was ^S but doesn't work in cbreak mode
*/
case CTRL(g):
oglobp = globp;
globp = "file";
gogo:
addr = dot;
vsave();
goto doinit;
#ifdef SIGTSTP
/*
* ^Z: suspend editor session and temporarily return
* to shell. Only works with Berkeley/IIASA process
* control in kernel.
*/
case CTRL(z):
forbid(dosusp == 0 || !ldisc);
vsave();
oglobp = globp;
globp = "stop";
goto gogo;
#endif
/*
* : Read a command from the echo area and
* execute it in command mode.
*/
case ':':
forbid (hadcnt);
vsave();
i = tchng;
addr = dot;
if (readecho(c)) {
esave[0] = 0;
goto fixup;
}
getDOT();
/*
* Use the visual undo buffer to store the global
* string for command mode, since it is idle right now.
*/
oglobp = globp; strcpy(vutmp, genbuf+1); globp = vutmp;
doinit:
esave[0] = 0;
fixech();
/*
* Have to finagle around not to lose last
* character after this command (when run from ex
* command mode). This is clumsy.
*/
d = peekc; ungetchar(0);
if (shouldpo) {
/*
* So after a "Hit return..." ":", we do
* another "Hit return..." the next time
*/
pofix();
shouldpo = 0;
}
CATCH
/*
* Save old values of options so we can
* notice when they change; switch into
* cooked mode so we are interruptible.
*/
onumber = value(NUMBER);
olist = value(LIST);
OPline = Pline;
OPutchar = Putchar;
#ifndef CBREAK
vcook();
#endif
commands(1, 1);
if (dot == zero && dol > zero)
dot = one;
#ifndef CBREAK
vraw();
#endif
ONERR
#ifndef CBREAK
vraw();
#endif
copy(esave, vtube[WECHO], TUBECOLS);
ENDCATCH
fixol();
Pline = OPline;
Putchar = OPutchar;
ungetchar(d);
globp = oglobp;
/*
* If we ended up with no lines in the buffer, make
* a line, and don't consider the buffer changed.
*/
if (dot == zero) {
fixzero();
sync();
}
splitw = 0;
/*
* Special case: did list/number options change?
*/
if (onumber != value(NUMBER))
setnumb(value(NUMBER));
if (olist != value(LIST))
setlist(value(LIST));
fixup:
/*
* If a change occurred, other than
* a write which clears changes, then
* we should allow an undo even if .
* didn't move.
*
* BUG: You can make this wrong by
* tricking around with multiple commands
* on one line of : escape, and including
* a write command there, but its not
* worth worrying about.
*/
if (FIXUNDO && tchng && tchng != i)
vundkind = VMANY, cursor = 0;
/*
* If we are about to do another :, hold off
* updating of screen.
*/
if (vcnt < 0 && Peekkey == ':') {
getDOT();
shouldpo = 1;
continue;
}
shouldpo = 0;
/*
* In the case where the file being edited is
* new; e.g. if the initial state hasn't been
* saved yet, then do so now.
*/
if (unddol == truedol) {
vundkind = VNONE;
Vlines = lineDOL();
if (!inglobal)
savevis();
addr = zero;
vcnt = 0;
if (esave[0] == 0)
copy(esave, vtube[WECHO], TUBECOLS);
}
/*
* If the current line moved reset the cursor position.
*/
if (dot != addr) {
vmoving = 0;
cursor = 0;
}
/*
* If current line is not on screen or if we are
* in open mode and . moved, then redraw.
*/
i = vcline + (dot - addr);
if (i < 0 || i >= vcnt && i >= -vcnt || state != VISUAL && dot != addr) {
if (state == CRTOPEN)
vup1();
if (vcnt > 0)
vcnt = 0;
vjumpto(dot, (char *) 0, '.');
} else {
/*
* Current line IS on screen.
* If we did a [Hit return...] then
* restore vcnt and clear screen if in visual
*/
vcline = i;
if (vcnt < 0) {
vcnt = -vcnt;
if (state == VISUAL)
vclear();
else if (state == CRTOPEN) {
vcnt = 0;
}
}
/*
* Limit max value of vcnt based on $
*/
i = vcline + lineDOL() - lineDOT() + 1;
if (i < vcnt)
vcnt = i;
/*
* Dirty and repaint.
*/
vdirty(0, LINES);
vrepaint(cursor);
}
/*
* If in visual, put back the echo area
* if it was clobberred.
*/
if (state == VISUAL) {
int sdc = destcol, sdl = destline;
splitw++;
vigoto(WECHO, 0);
for (i = 0; i < TUBECOLS - 1; i++) {
if (esave[i] == 0)
break;
vputchar(esave[i]);
}
splitw = 0;
vgoto(sdl, sdc);
}
continue;
/*
* u undo the last changing command.
*/
case 'u':
vundo(1);
continue;
/*
* U restore current line to initial state.
*/
case 'U':
vUndo();
continue;
fonfon:
beep();
vmacp = 0;
inopen = 1; /* might have been -1 */
continue;
}
/*
* Rest of commands are decoded by the operate
* routine.
*/
operate(c, cnt);
}
}
/*
* Parse file name for command encoded by comm.
* If comm is E then command is doomed and we are
* parsing just so user won't have to retype the name.
*/
void
filename(int comm)
{
register int c = comm, d;
register int i;
d = ex_getchar();
if (endcmd(d)) {
if (savedfile[0] == 0 && comm != 'f')
error("No file|No current filename");
CP(file, savedfile);
wasalt = (isalt > 0) ? isalt-1 : 0;
isalt = 0;
oldadot = altdot;
if (c == 'e' || c == 'E')
altdot = lineDOT();
if (d == EOF)
ungetchar(d);
} else {
ungetchar(d);
getone();
eol();
if (savedfile[0] == 0 && c != 'E' && c != 'e') {
c = 'e';
edited = 0;
}
wasalt = strcmp(file, altfile) == 0;
oldadot = altdot;
switch (c) {
case 'f':
edited = 0;
/* fall into ... */
case 'e':
if (savedfile[0]) {
altdot = lineDOT();
CP(altfile, savedfile);
}
CP(savedfile, file);
break;
default:
if (file[0]) {
if (c != 'E')
altdot = lineDOT();
CP(altfile, file);
}
break;
}
}
if ((hush && comm != 'f') || comm == 'E')
return;
if (file[0] != 0) {
lprintf("\"%s\"", file);
if (comm == 'f') {
if (value(READONLY))
ex_printf(" [Read only]");
if (!edited)
ex_printf(" [Not edited]");
if (tchng)
ex_printf(" [Modified]");
}
flush();
} else
ex_printf("No file ");
if (comm == 'f') {
if (!(i = lineDOL()))
i++;
ex_printf(" line %d of %d --%ld%%--", lineDOT(), lineDOL(),
(long) 100 * lineDOT() / i);
}
}
/*
* The guts of a sync. Similar to redraw but
* just less ambitous.
*/
void
vsync1(register int p)
{
register int l;
char temp[LBSIZE];
register struct vlinfo *vp = &vlinfo[0];
short oldhold = hold;
#ifdef ADEBUG
if (trace)
tfixnl(), fprintf(trace, "vsync1(%d)\n", p), tvliny();
#endif
if (holdupd) {
if (holdupd < 3)
holdupd = 2;
return;
}
if (state == HARDOPEN || splitw)
return;
vscrap();
CP(temp, linebuf);
if (vcnt == 0)
LINE(0) = WTOP;
l = 0;
while (l < vcnt && vp->vliny < p)
l++, vp++;
heldech = 0;
hold |= HOLDECH;
while (p <= WBOT && Peekkey != ATTN) {
/*
* Want to put a line here if not in visual and first line
* or if there are lies left and this line starts before
* the current line, or if this line is piled under the
* next line (vreplace does this and we undo it).
*/
if (l == 0 && state != VISUAL ||
(l < vcnt && (vp->vliny <= p || vp[0].vliny == vp[1].vliny))) {
if (l == 0 || vp->vliny < p || (vp->vflags & VDIRT)) {
if (l == vcline)
strcLIN(temp);
else
getline(dot[l - vcline]);
/*
* Be careful that a long line doesn't cause the
* screen to shoot up.
*/
if (l != vcline && (vp->vflags & VDIRT)) {
vp->vdepth = vdepth();
vp->vflags &= ~VDIRT;
if (p + vp->vdepth - 1 > WBOT)
break;
}
vreopen(p, lineDOT() + (l - vcline), l);
}
p = vp->vliny + vp->vdepth;
vp++;
l++;
} else
/*
* A physical line between logical lines,
* so we settle for an @ at the beginning.
*/
vclrlin(p, dot + (l - vcline)), p++;
}
strcLIN(temp);
hold = oldhold;
if (heldech)
vclrech(0);
}
/*ARGSUSED*/
void
vmove(int unused)
{
register int cnt;
if (wdot) {
if (wdot < one || wdot > dol) {
beep();
return;
}
cnt = wdot - dot;
wdot = NOLINE;
if (cnt)
killU();
vupdown(cnt, wcursor);
return;
}
/*
* When we move onto a new line, save information for U undo.
*/
if (vUNDdot != dot) {
vUNDsav = *dot;
vUNDcurs = wcursor;
vUNDdot = dot;
}
/*
* In hardcopy open, type characters to left of cursor
* on new line, or back cursor up if its to left of where we are.
* In any case if the current line is ``rubbled'' i.e. has trashy
* looking overstrikes on it or \'s from deletes, we reprint
* so it is more comprehensible (and also because we can't work
* if we let it get more out of sync since column() won't work right.
*/
if (state == HARDOPEN) {
register char *cp;
if (rubble) {
register int c;
int oldhold = hold;
sethard();
cp = wcursor;
c = *cp;
*cp = 0;
hold |= HOLDDOL;
vreopen(WTOP, lineDOT(), vcline);
hold = oldhold;
*cp = c;
} else if (wcursor > cursor) {
vfixcurs();
for (cp = cursor; *cp && cp < wcursor;) {
int c, n;
nextc(c, cp, n);
cp += n;
c &= TRIM;
putchar(c ? c : ' ');
}
}
}
vsetcurs(wcursor);
}
/*
* Parse file name for command encoded by comm.
* If comm is E then command is doomed and we are
* parsing just so user won't have to retype the name.
*/
void
filename(int comm)
{
int c = comm, d;
int i;
d = getchar();
if (endcmd(d)) {
if (savedfile[0] == 0 && comm != 'f')
error(value(vi_TERSE) ? gettext("No file") :
gettext("No current filename"));
CP(file, savedfile);
wasalt = (isalt > 0) ? isalt-1 : 0;
isalt = 0;
oldadot = altdot;
if (c == 'e' || c == 'E')
altdot = lineDOT();
if (d == EOF)
ungetchar(d);
} else {
ungetchar(d);
getone();
eol();
if (savedfile[0] == 0 && c != 'E' && c != 'e') {
c = 'e';
edited = 0;
}
wasalt = strcmp(file, altfile) == 0;
oldadot = altdot;
switch (c) {
case 'f':
edited = 0;
/* FALLTHROUGH */
case 'e':
if (savedfile[0]) {
altdot = lineDOT();
CP(altfile, savedfile);
}
CP(savedfile, file);
break;
default:
if (file[0]) {
if (c != 'E')
altdot = lineDOT();
CP(altfile, file);
}
break;
}
}
if (hush && comm != 'f' || comm == 'E')
return;
if (file[0] != 0) {
lprintf("\"%s\"", file);
if (comm == 'f') {
if (value(vi_READONLY))
viprintf(gettext(" [Read only]"));
if (!edited)
viprintf(gettext(" [Not edited]"));
if (tchng)
viprintf(gettext(" [Modified]"));
}
flush();
} else
viprintf(gettext("No file "));
if (comm == 'f') {
if (!(i = lineDOL()))
i++;
/*
* TRANSLATION_NOTE
* Reference order of arguments must not
* be changed using '%digit$', since vi's
* viprintf() does not support it.
*/
viprintf(gettext(" line %d of %d --%ld%%--"), lineDOT(),
lineDOL(), (long)(100 * lineDOT() / i));
}
}
void
vappend(int ch, int cnt, int indent)
{
int i;
unsigned char *gcursor;
bool escape;
int repcnt, savedoomed;
short oldhold = hold;
int savecnt = cnt;
line *startsrcline;
int startsrccol, endsrccol;
int gotNL = 0;
int imultlinecnt = 0;
int omultlinecnt = 0;
if ((savecnt > 1) && (ch == 'o' || ch == 'O')) {
omultlinecnt = 1;
}
#ifdef XPG6
if ((savecnt > 1) && (ch == 'a' || ch == 'A' || ch == 'i' || ch == 'I'))
imultlinecnt = 1;
#endif /* XPG6 */
/*
* Before a move in hardopen when the line is dirty
* or we are in the middle of the printed representation,
* we retype the line to the left of the cursor so the
* insert looks clean.
*/
if (ch != 'o' && state == HARDOPEN && (rubble || !ateopr())) {
rubble = 1;
gcursor = cursor;
i = *gcursor;
*gcursor = ' ';
wcursor = gcursor;
(void) vmove();
*gcursor = i;
}
/*
* If vrep() passed indent = 0, this is the 'r' command,
* so don't autoindent until the last char.
*/
vaifirst = indent == 0;
/*
* Handle replace character by (eventually)
* limiting the number of input characters allowed
* in the vgetline routine.
*/
if (ch == 'r')
repcnt = 2;
else
repcnt = 0;
/*
* If an autoindent is specified, then
* generate a mixture of blanks to tabs to implement
* it and place the cursor after the indent.
* Text read by the vgetline routine will be placed in genbuf,
* so the indent is generated there.
*/
if (value(vi_AUTOINDENT) && indent != 0) {
unsigned char x;
gcursor = genindent(indent);
*gcursor = 0;
vgotoCL(nqcolumn(lastchr(linebuf, cursor), genbuf));
} else {
gcursor = genbuf;
*gcursor = 0;
if (ch == 'o')
vfixcurs();
}
/*
* Prepare for undo. Pointers delimit inserted portion of line.
*/
vUA1 = vUA2 = cursor;
/*
* If we are not in a repeated command and a ^@ comes in
* then this means the previous inserted text.
* If there is none or it was too long to be saved,
* then beep() and also arrange to undo any damage done
* so far (e.g. if we are a change.)
*/
switch (ch) {
case 'r':
break;
case 'a':
/*
* TRANSLATION_NOTE
* "A" is a terse mode message corresponding to
* "APPEND MODE".
* Translated message of "A" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("A"));
} else {
vshowmode(gettext("APPEND MODE"));
}
break;
case 's':
/*
* TRANSLATION_NOTE
* "S" is a terse mode message corresponding to
* "SUBSTITUTE MODE".
* Translated message of "S" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("S"));
} else {
vshowmode(gettext("SUBSTITUTE MODE"));
}
break;
case 'c':
/*
* TRANSLATION_NOTE
* "C" is a terse mode message corresponding to
* "CHANGE MODE".
* Translated message of "C" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("C"));
} else {
vshowmode(gettext("CHANGE MODE"));
}
break;
case 'R':
/*
* TRANSLATION_NOTE
* "R" is a terse mode message corresponding to
* "REPLACE MODE".
* Translated message of "R" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("R"));
} else {
vshowmode(gettext("REPLACE MODE"));
}
break;
case 'o':
/*
* TRANSLATION_NOTE
* "O" is a terse mode message corresponding to
* "OPEN MODE".
* Translated message of "O" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("O"));
} else {
vshowmode(gettext("OPEN MODE"));
}
break;
case 'i':
/*
* TRANSLATION_NOTE
* "I" is a terse mode message corresponding to
* "INSERT MODE" and the following "INPUT MODE".
* Translated message of "I" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INSERT MODE"));
}
break;
default:
/*
* TRANSLATION_NOTE
* "I" is a terse mode message corresponding to
* "INPUT MODE" and the previous "INSERT MODE".
* Translated message of "I" must be 1 character (not byte).
* Or, just leave it.
*/
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INPUT MODE"));
}
}
ixlatctl(1);
if ((vglobp && *vglobp == 0) || peekbr()) {
if (INS[128] == 0200) {
(void) beep();
if (!splitw)
ungetkey('u');
doomed = 0;
hold = oldhold;
return;
}
/*
* Unread input from INS.
* An escape will be generated at end of string.
* Hold off n^^2 type update on dumb terminals.
*/
vglobp = INS;
inscdcnt = INSCDCNT;
hold |= HOLDQIK;
} else if (vglobp == 0) {
/*
* Not a repeated command, get
* a new inserted text for repeat.
*/
INS[0] = 0;
INS[128] = 0;
INSCDCNT = 0;
}
/*
* For wrapmargin to hack away second space after a '.'
* when the first space caused a line break we keep
* track that this happened in gobblebl, which says
* to gobble up a blank silently.
*/
gobblebl = 0;
startsrcline = dot;
startsrccol = cursor - linebuf;
/*
* Text gathering loop.
* New text goes into genbuf starting at gcursor.
* cursor preserves place in linebuf where text will eventually go.
*/
if (*cursor == 0 || state == CRTOPEN)
hold |= HOLDROL;
for (;;) {
if (ch == 'r' && repcnt == 0)
escape = 0;
else {
ixlatctl(1);
/*
* When vgetline() returns, gcursor is
* pointing to '\0' and vgetline() has
* read an ESCAPE or NL.
*/
gcursor = vgetline(repcnt, gcursor, &escape, ch);
if (escape == '\n') {
gotNL = 1;
#ifdef XPG6
if (ch == 'r') {
/*
* XPG6 assertion 313 [count]r\n :
* Arrange to set cursor correctly.
*/
endsrccol = gcursor - genbuf - 1;
}
#endif /* XPG6 */
} else {
/*
* Upon escape, gcursor is pointing to '\0'
* terminating the string in genbuf.
*/
endsrccol = gcursor - genbuf - 1;
}
ixlatctl(0);
/*
* After an append, stick information
* about the ^D's and ^^D's and 0^D's in
* the repeated text buffer so repeated
* inserts of stuff indented with ^D as backtab's
* can work.
*/
if (HADUP)
addtext("^");
else if (HADZERO)
addtext("0");
if(!vglobp)
INSCDCNT = CDCNT;
while (CDCNT > 0) {
addtext("\004");
CDCNT--;
}
if (gobbled)
addtext(" ");
addtext(ogcursor);
}
repcnt = 0;
/*
* Smash the generated and preexisting indents together
* and generate one cleanly made out of tabs and spaces
* if we are using autoindent and this isn't 'r' command.
*/
if (!vaifirst && value(vi_AUTOINDENT)) {
i = fixindent(indent);
if (!HADUP)
indent = i;
gcursor = strend(genbuf);
}
/*
* Set cnt to 1 to avoid repeating the text on the same line.
* Do this for commands 'i', 'I', 'a', and 'A', if we're
* inserting anything with a newline for XPG6. Always do this
* for commands 'o' and 'O'.
*/
if ((imultlinecnt && gotNL) || omultlinecnt) {
cnt = 1;
}
/*
* Limit the repetition count based on maximum
* possible line length; do output implied
* by further count (> 1) and cons up the new line
* in linebuf.
*/
cnt = vmaxrep(ch, cnt);
/*
* cursor points to linebuf
* Copy remaining old text (cursor) in original
* line to after new text (gcursor + 1) in genbuf.
*/
CP(gcursor + 1, cursor);
/*
* For [count] r \n command, when replacing [count] chars
* with '\n', this loop replaces [count] chars with "".
*/
do {
/* cp new text (genbuf) into linebuf (cursor) */
CP(cursor, genbuf);
if (cnt > 1) {
int oldhold = hold;
Outchar = vinschar;
hold |= HOLDQIK;
viprintf("%s", genbuf);
hold = oldhold;
Outchar = vputchar;
}
/* point cursor after new text in linebuf */
cursor += gcursor - genbuf;
} while (--cnt > 0);
endim();
vUA2 = cursor;
/* add the remaining old text after the cursor */
if (escape != '\n')
CP(cursor, gcursor + 1);
/*
* If doomed characters remain, clobber them,
* and reopen the line to get the display exact.
* eg. c$ to change to end of line
*/
if (state != HARDOPEN) {
DEPTH(vcline) = 0;
savedoomed = doomed;
if (doomed > 0) {
int cind = cindent();
physdc(cind, cind + doomed);
doomed = 0;
}
if(MB_CUR_MAX > 1)
rewrite = _ON;
i = vreopen(LINE(vcline), lineDOT(), vcline);
if(MB_CUR_MAX > 1)
rewrite = _OFF;
#ifdef TRACE
if (trace)
fprintf(trace, "restoring doomed from %d to %d\n", doomed, savedoomed);
#endif
if (ch == 'R')
doomed = savedoomed;
}
/*
* Unless we are continuing on to another line
* (got a NL), break out of the for loop (got
* an ESCAPE).
*/
if (escape != '\n') {
vshowmode("");
break;
}
/*
* Set up for the new line.
* First save the current line, then construct a new
* first image for the continuation line consisting
* of any new autoindent plus the pushed ahead text.
*/
killU();
addtext(gobblebl ? " " : "\n");
/* save vutmp (for undo state) into temp file */
vsave();
cnt = 1;
if (value(vi_AUTOINDENT)) {
if (value(vi_LISP))
indent = lindent(dot + 1);
else
if (!HADUP && vaifirst)
indent = whitecnt(linebuf);
vaifirst = 0;
strcLIN(vpastwh(gcursor + 1));
gcursor = genindent(indent);
*gcursor = 0;
if (gcursor + strlen(linebuf) > &genbuf[LBSIZE - 2])
gcursor = genbuf;
CP(gcursor, linebuf);
} else {
/*
* Put gcursor at start of genbuf to wipe
* out previous line in preparation for
* the next vgetline() loop.
*/
CP(genbuf, gcursor + 1);
gcursor = genbuf;
}
/*
* If we started out as a single line operation and are now
* turning into a multi-line change, then we had better yank
* out dot before it changes so that undo will work
* correctly later.
*/
if (FIXUNDO && vundkind == VCHNG) {
vremote(1, yank, 0);
undap1--;
}
/*
* Now do the append of the new line in the buffer,
* and update the display, ie: append genbuf to
* the file after dot. If slowopen
* we don't do very much.
*/
vdoappend(genbuf);
vundkind = VMANYINS;
vcline++;
if (state != VISUAL)
vshow(dot, NOLINE);
else {
i += LINE(vcline - 1);
vopen(dot, i);
if (value(vi_SLOWOPEN))
vscrap();
else
vsync1(LINE(vcline));
}
switch (ch) {
case 'r':
break;
case 'a':
if (value(vi_TERSE)) {
vshowmode(gettext("A"));
} else {
vshowmode(gettext("APPEND MODE"));
}
break;
case 's':
if (value(vi_TERSE)) {
vshowmode(gettext("S"));
} else {
vshowmode(gettext("SUBSTITUTE MODE"));
}
break;
case 'c':
if (value(vi_TERSE)) {
vshowmode(gettext("C"));
} else {
vshowmode(gettext("CHANGE MODE"));
}
break;
case 'R':
if (value(vi_TERSE)) {
vshowmode(gettext("R"));
} else {
vshowmode(gettext("REPLACE MODE"));
}
break;
case 'i':
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INSERT MODE"));
}
break;
case 'o':
if (value(vi_TERSE)) {
vshowmode(gettext("O"));
} else {
vshowmode(gettext("OPEN MODE"));
}
break;
default:
if (value(vi_TERSE)) {
vshowmode(gettext("I"));
} else {
vshowmode(gettext("INPUT MODE"));
}
}
strcLIN(gcursor);
/* zero genbuf */
*gcursor = 0;
cursor = linebuf;
vgotoCL(nqcolumn(cursor - 1, genbuf));
} /* end for (;;) loop in vappend() */
if (imultlinecnt && gotNL) {
imultlinerep(savecnt, startsrcline, startsrccol, endsrccol);
} else if (omultlinecnt) {
omultlinerep(savecnt, startsrcline, endsrccol);
#ifdef XPG6
} else if (savecnt > 1 && ch == 'r' && gotNL) {
/*
* XPG6 assertion 313 & 254 : Position cursor for [count]r\n
* then insert [count -1] newlines.
*/
endsrccol = gcursor - genbuf - 1;
rmultlinerep(savecnt, endsrccol);
#endif /* XPG6 */
}
/*
* All done with insertion, position the cursor
* and sync the screen.
*/
hold = oldhold;
if ((imultlinecnt && gotNL) || omultlinecnt) {
fixdisplay();
#ifdef XPG6
} else if (savecnt > 1 && ch == 'r' && gotNL) {
fixdisplay();
/*
* XPG6 assertion 313 & 254 [count]r\n : Set flag to call
* fixdisplay() after operate() has finished. To be sure that
* the text (after the last \n followed by an indent) is always
* displayed, fixdisplay() is called right before getting
* the next command.
*/
redisplay = 1;
#endif /* XPG6 */
} else if (cursor > linebuf) {
cursor = lastchr(linebuf, cursor);
#ifdef XPG6
/*
* XPG6 assertion 313 & 254 [count]r\n :
* For 'r' command, when the replacement char causes new
* lines to be created, point cursor to first non-blank.
* The old code, ie: cursor = lastchr(linebuf, cursor);
* set cursor to the blank before the first non-blank
* for r\n
*/
if (ch == 'r' && gotNL && isblank((int)*cursor))
++cursor;
#endif /* XPG6 */
}
if (state != HARDOPEN)
vsyncCL();
else if (cursor > linebuf)
back1();
doomed = 0;
wcursor = cursor;
(void) vmove();
}
/*
* Parse file name for command encoded by comm.
* If comm is E then command is doomed and we are
* parsing just so user won't have to retype the name.
*/
void
filename(int comm)
{
register int c = comm, d;
register int i;
#ifdef FLOCKFILE
int lock ;
lock = 0 ;
#endif
d = ex_getchar();
if (endcmd(d)) {
if (savedfile[0] == 0 && comm != 'f')
error("No file|No current filename");
CP(file, savedfile);
#ifdef FLOCKFILE
if (io_curr && io_curr != io_savedfile) close(io_curr) ;
lock = lock_curr = lock_savedfile ;
io_curr = io_savedfile ;
#endif
wasalt = (isalt > 0) ? isalt-1 : 0;
isalt = 0;
oldadot = altdot;
if (c == 'e' || c == 'E')
altdot = lineDOT();
if (d == EOF)
ungetchar(d);
} else {
ungetchar(d);
getone();
eol();
if (savedfile[0] == 0 && c != 'E' && c != 'e') {
c = 'e';
edited = 0;
}
wasalt = strcmp(file, altfile) == 0;
oldadot = altdot;
switch (c) {
case 'f':
edited = 0;
/* fall into ... */
case 'e':
if (savedfile[0]) {
#ifdef FLOCKFILE
if (strcmp(file,savedfile) == 0) break ;
#endif
altdot = lineDOT();
CP(altfile, savedfile);
#ifdef FLOCKFILE
if (io_altfile) close (io_altfile) ;
io_altfile = io_savedfile ;
lock_altfile = lock_savedfile ;
io_savedfile = 0 ;
#endif
}
CP(savedfile, file);
#ifdef FLOCKFILE
io_savedfile = io_curr ;
lock_savedfile = lock_curr ;
io_curr = 0 ; lock = lock_curr = 0 ;
#endif
break;
default:
if (file[0]) {
#ifdef FLOCKFILE
if (wasalt) break ;
#endif
if (c != 'E')
altdot = lineDOT();
CP(altfile, file);
#ifdef FLOCKFILE
if (io_altfile
&& io_altfile != io_curr) close (io_altfile) ;
io_altfile = io_curr ;
lock_altfile = lock_curr ;
io_curr = 0 ; lock = lock_curr = 0 ;
#endif
}
break;
}
}
if ((hush && comm != 'f') || comm == 'E')
return;
if (file[0] != 0) {
lprintf("\"%s\"", file);
if (comm == 'f') {
if (value(READONLY))
ex_printf(" [Read only]");
if (!edited)
ex_printf(" [Not edited]");
if (tchng)
ex_printf(" [Modified]");
#ifdef FLOCKFILE
if (lock == LOCK_SH)
ex_printf(" [Shared lock]") ;
else if (lock == LOCK_EX)
ex_printf(" [Exclusive lock]") ;
#endif
}
flush();
} else
ex_printf("No file ");
if (comm == 'f') {
if (!(i = lineDOL()))
i++;
ex_printf(" line %d of %d --%ld%%--", lineDOT(), lineDOL(),
(long) 100 * lineDOT() / i);
}
}
