int main(int argc, char *argv[])
{
log_sweep(rpm_filter, NULL, 1, FS/2, 1000, log(10));
struct lp2_filter f2 = { 0 };
lp2_set_fc(&f2, FILTER_CRITICALDAMPED, 16.666 / FS);
log_sweep( lp2_filter, &f2, 1, FS/2, 1000, log(10) );
/*
struct lp1_filter f1 = { 0 };
struct lp2_filter f2 = { 0 };
lp1_set_fc(&f1, 100.0 / FS);
log_sweep( lp1_filter, &f1, 1, FS/2, 1000, log(10) );
lp2_set_fc(&f2, FILTER_CRITICALDAMPED, 100.0 / FS);
log_sweep( lp2_filter, &f2, 1, FS/2, 1000, log(10) );
lp2_set_fc(&f2, FILTER_CHEBYSHEV_0_5, 100.0 / FS);
log_sweep( lp2_filter, &f2, 1, FS/2, 1000, log(10) );
*/
return EXIT_SUCCESS;
}
// Code cache unloading: when compilers notice the code cache is getting full,
// they will call a vm op that comes here. This code attempts to speculatively
// unload the oldest half of the nmethods (based on the compile job id) by
// saving the old code in a list in the CodeCache. Then
// execution resumes. If a method so marked is not called by the second sweeper
// stack traversal after the current one, the nmethod will be marked non-entrant and
// got rid of by normal sweeping. If the method is called, the methodOop's
// _code field is restored and the methodOop/nmethod
// go back to their normal state.
void NMethodSweeper::handle_full_code_cache(bool is_full) {
// Only the first one to notice can advise us to start early cleaning
if (!is_full){
jint old = Atomic::cmpxchg( 1, &_advise_to_sweep, 0 );
if (old != 0) {
return;
}
}
if (is_full) {
// Since code cache is full, immediately stop new compiles
bool did_set = CompileBroker::set_should_compile_new_jobs(CompileBroker::stop_compilation);
if (!did_set) {
// only the first to notice can start the cleaning,
// others will go back and block
return;
}
set_was_full(true);
// If we run out within MinCodeCacheFlushingInterval of the last unload time, give up
jlong now = os::javaTimeMillis();
jlong max_interval = (jlong)MinCodeCacheFlushingInterval * (jlong)1000;
jlong curr_interval = now - _last_was_full;
if (curr_interval < max_interval) {
_rescan = true;
log_sweep("disable_compiler", "flushing_interval='" UINT64_FORMAT "'",
curr_interval/1000);
return;
}
}
VM_HandleFullCodeCache op(is_full);
VMThread::execute(&op);
// rescan again as soon as possible
_rescan = true;
}
void NMethodSweeper::scan_stacks() {
assert(SafepointSynchronize::is_at_safepoint(), "must be executed at a safepoint");
if (!MethodFlushing) return;
_do_sweep = true;
// No need to synchronize access, since this is always executed at a
// safepoint. If we aren't in the middle of scan and a rescan
// hasn't been requested then just return. If UseCodeCacheFlushing is on and
// code cache flushing is in progress, don't skip sweeping to help make progress
// clearing space in the code cache.
if ((_current == NULL && !_rescan) && !(UseCodeCacheFlushing && !CompileBroker::should_compile_new_jobs())) {
_do_sweep = false;
return;
}
// Make sure CompiledIC_lock in unlocked, since we might update some
// inline caches. If it is, we just bail-out and try later.
if (CompiledIC_lock->is_locked() || Patching_lock->is_locked()) return;
// Check for restart
assert(CodeCache::find_blob_unsafe(_current) == _current, "Sweeper nmethod cached state invalid");
if (_current == NULL) {
_seen = 0;
_invocations = NmethodSweepFraction;
_current = CodeCache::first_nmethod();
_traversals += 1;
if (PrintMethodFlushing) {
tty->print_cr("### Sweep: stack traversal %d", _traversals);
}
Threads::nmethods_do(&mark_activation_closure);
// reset the flags since we started a scan from the beginning.
_rescan = false;
_locked_seen = 0;
_not_entrant_seen_on_stack = 0;
}
if (UseCodeCacheFlushing) {
if (!CodeCache::needs_flushing()) {
// scan_stacks() runs during a safepoint, no race with setters
_advise_to_sweep = 0;
}
if (was_full()) {
// There was some progress so attempt to restart the compiler
jlong now = os::javaTimeMillis();
jlong max_interval = (jlong)MinCodeCacheFlushingInterval * (jlong)1000;
jlong curr_interval = now - _last_was_full;
if ((!CodeCache::needs_flushing()) && (curr_interval > max_interval)) {
CompileBroker::set_should_compile_new_jobs(CompileBroker::run_compilation);
set_was_full(false);
// Update the _last_was_full time so we can tell how fast the
// code cache is filling up
_last_was_full = os::javaTimeMillis();
log_sweep("restart_compiler");
}
}
}
}
void NMethodSweeper::sweep_code_cache() {
#ifdef ASSERT
jlong sweep_start;
if (PrintMethodFlushing) {
sweep_start = os::javaTimeMillis();
}
#endif
if (PrintMethodFlushing && Verbose) {
tty->print_cr("### Sweep at %d out of %d. Invocations left: %d", _seen, CodeCache::nof_nmethods(), _invocations);
}
// We want to visit all nmethods after NmethodSweepFraction
// invocations so divide the remaining number of nmethods by the
// remaining number of invocations. This is only an estimate since
// the number of nmethods changes during the sweep so the final
// stage must iterate until it there are no more nmethods.
int todo = (CodeCache::nof_nmethods() - _seen) / _invocations;
assert(!SafepointSynchronize::is_at_safepoint(), "should not be in safepoint when we get here");
assert(!CodeCache_lock->owned_by_self(), "just checking");
{
MutexLockerEx mu(CodeCache_lock, Mutex::_no_safepoint_check_flag);
// The last invocation iterates until there are no more nmethods
for (int i = 0; (i < todo || _invocations == 1) && _current != NULL; i++) {
// Since we will give up the CodeCache_lock, always skip ahead
// to the next nmethod. Other blobs can be deleted by other
// threads but nmethods are only reclaimed by the sweeper.
nmethod* next = CodeCache::next_nmethod(_current);
// Now ready to process nmethod and give up CodeCache_lock
{
MutexUnlockerEx mu(CodeCache_lock, Mutex::_no_safepoint_check_flag);
process_nmethod(_current);
}
_seen++;
_current = next;
}
}
assert(_invocations > 1 || _current == NULL, "must have scanned the whole cache");
if (_current == NULL && !_rescan && (_locked_seen || _not_entrant_seen_on_stack)) {
// we've completed a scan without making progress but there were
// nmethods we were unable to process either because they were
// locked or were still on stack. We don't have to aggresively
// clean them up so just stop scanning. We could scan once more
// but that complicates the control logic and it's unlikely to
// matter much.
if (PrintMethodFlushing) {
tty->print_cr("### Couldn't make progress on some nmethods so stopping sweep");
}
}
#ifdef ASSERT
if(PrintMethodFlushing) {
jlong sweep_end = os::javaTimeMillis();
tty->print_cr("### sweeper: sweep time(%d): " INT64_FORMAT, _invocations, sweep_end - sweep_start);
}
#endif
if (_invocations == 1) {
log_sweep("finished");
}
}
