// h/w clock ASK emulator - initialise data pointers for ISR and start timer 2
// args: clock pulsewidth (NOT period!), data as array of 0/1, repeat
void write_ASK_HW_clock(unsigned int pulse, BYTE *data, unsigned int tpb, unsigned int repeat)
{
// convert to ticks
pulse= CONVERT_TO_TICKS(pulse);
// we only need to tick once per bit
pulse *= (unsigned long) tpb;
// point globals at data for ISR
EMU_ThisBit= *data;
EMU_Data= data + 1;
EMU_Reset_Data= data;
EMU_DataBitRate= 1;
EMU_SubCarrier_T0= 1;
EMU_Repeat= repeat;
// if we're manchester or bi-phase encoding, we want to clock twice as fast so we can toggle on half-bit
if(RFIDlerConfig.Manchester || RFIDlerConfig.BiPhase)
{
pulse /= 2;
EMU_SubCarrier_T0 *= 2;
EMU_DataBitRate *= 2;
}
// make sure no clock is running
stop_HW_clock();
// set mode
EmulationMode= MOD_MODE_ASK_OOK;
// make sure nobody's using our timer
CloseTimer3();
// tri-state on, clock low
READER_CLOCK_ENABLE_ON();
CLOCK_COIL= LOW;
// emulator mode
COIL_MODE_EMULATOR();
// this is also a semaphore so the rest of the code knows we're running
mLED_Emulate_On();
// start timer - ISR will send data
OpenTimer3( T3_ON | T3_PS_1_1 | T3_SOURCE_INT, pulse - 1L);
mT3SetIntPriority(6);
mT3ClearIntFlag();
mT3IntEnable(TRUE);
}
// h/w clock PSK emulator - initialise data pointers for ISR and start timer 2
// args: clock period, data as array of 0/1, fc per bit, sub-carrier ticks, repeat
void write_PSK1_HW_clock(unsigned int period, BYTE *data, unsigned int fcpb, unsigned int c0, unsigned int repeat)
{
// convert to ticks
period= CONVERT_TO_TICKS(period);
// for psk we want a full clock cycle, not a tick
period *= 2;
// point globals at data for ISR
EMU_ThisBit= *data;
EMU_Data= data + 1;
EMU_Reset_Data= data;
EMU_DataBitRate= fcpb;
EMU_SubCarrier_T0= c0;
EMU_Repeat= repeat;
// set mode
EmulationMode= MOD_MODE_PSK1;
// make sure no clock is running
stop_HW_clock();
// make sure nobody's using our timers
CloseTimer3();
// tri-state on, clock low
READER_CLOCK_ENABLE_ON();
CLOCK_COIL= LOW;
// emulator mode
COIL_MODE_EMULATOR();
// this is also a semaphore so the rest of the code knows we're running
mLED_Emulate_On();
// start timer - ISR will send data
OpenTimer3( T3_ON | T3_PS_1_1 | T3_SOURCE_INT, period / 2L - 1L);
mT3SetIntPriority(6);
mT3ClearIntFlag();
mT3IntEnable(TRUE);
}
// h/w clock FSK emulator - initialise data pointers for ISR and start timer 2
// args: clock pulsewidth (NOT period!), data as array of 0/1, T0 sub-carrier ticks, T1 sub-carrier ticks, repeat
void write_FSK_HW_clock(unsigned long pulse, BYTE *data, unsigned int tpb, unsigned int t0, unsigned int t1, unsigned int repeat)
{
// convert to ticks
pulse= CONVERT_TO_TICKS(pulse);
// point globals at data for ISR
EMU_ThisBit= *data;
EMU_Data= data + 1;
EMU_Reset_Data= data;
EMU_Repeat= repeat;
EMU_DataBitRate= tpb;
EMU_SubCarrier_T0= t0;
EMU_SubCarrier_T1= t1;
// set mode
EmulationMode= MOD_MODE_FSK;
// make sure no clock is running
stop_HW_clock();
// make sure nobody's using our timer
CloseTimer3();
// emulator mode
COIL_MODE_EMULATOR();
// tri-state on, clock low
READER_CLOCK_ENABLE_ON();
CLOCK_COIL= LOW;
// this is also a semaphore so the rest of the code knows we're running
mLED_Emulate_On();
// start timer - ISR will send data
OpenTimer3( T3_ON | T3_PS_1_1 | T3_SOURCE_INT, pulse - 1L);
mT3SetIntPriority(6);
mT3ClearIntFlag();
mT3IntEnable(TRUE);
}