示例#1
0
void e05a30_device::device_reset()
{
	m_printhead  = 0x00;
	m_pf_stepper = 0x00;
	m_cr_stepper = 0x00;

	/* centronics init */
	m_centronics_nack = FALSE;
	m_centronics_busy = FALSE;
	m_write_centronics_ack   (!m_centronics_nack);
	m_write_centronics_busy  ( m_centronics_busy);
	m_write_centronics_perror(FALSE);
	m_write_centronics_fault (TRUE);
	m_write_centronics_select(TRUE);

	m_write_ready(1);
}
示例#2
0
void c2040_fdc_t::live_run(const attotime &limit)
{
	if(cur_live.state == IDLE || cur_live.next_state != -1)
		return;

	for(;;) {
		switch(cur_live.state) {
		case RUNNING: {
			bool syncpoint = false;

			if (cur_live.tm > limit)
				return;

			int bit = get_next_bit(cur_live.tm, limit);
			if(bit < 0)
				return;

			int cell_counter = cur_live.cell_counter;

			if (bit) {
				cur_live.cycle_counter = cur_live.ds;
				cur_live.cell_counter = 0;
			} else {
				cur_live.cycle_counter++;
			}

			if (cur_live.cycle_counter == 16) {
				cur_live.cycle_counter = cur_live.ds;

				cur_live.cell_counter++;
				cur_live.cell_counter &= 0xf;
			}

			if (!BIT(cell_counter, 1) && BIT(cur_live.cell_counter, 1)) {
				// read bit
				cur_live.shift_reg <<= 1;
				cur_live.shift_reg |= !(BIT(cur_live.cell_counter, 3) || BIT(cur_live.cell_counter, 2));
				cur_live.shift_reg &= 0x3ff;

				if (LOG) logerror("%s read bit %u (%u) >> %03x, rw=%u mode=%u\n", cur_live.tm.as_string(), cur_live.bit_counter,
					!(BIT(cur_live.cell_counter, 3) || BIT(cur_live.cell_counter, 2)), cur_live.shift_reg, cur_live.rw_sel, cur_live.mode_sel);

				// write bit
				if (!cur_live.rw_sel) { // TODO WPS
					write_next_bit(BIT(cur_live.shift_reg_write, 9), limit);
				}

				syncpoint = true;
			}

			int sync = !((cur_live.shift_reg == 0x3ff) && cur_live.rw_sel);

			if (!sync) {
				cur_live.bit_counter = 0;
			} else if (!BIT(cell_counter, 1) && BIT(cur_live.cell_counter, 1) && cur_live.sync) {
				cur_live.bit_counter++;
				if (cur_live.bit_counter == 10) {
					cur_live.bit_counter = 0;
				}
			}

			// update GCR
			if (cur_live.rw_sel) {
				cur_live.i = (cur_live.rw_sel << 10) | cur_live.shift_reg;
			} else {
				cur_live.i = (cur_live.rw_sel << 10) | ((cur_live.pi & 0xf0) << 1) | (cur_live.mode_sel << 4) | (cur_live.pi & 0x0f);
			}

			cur_live.e = m_gcr_rom->base()[cur_live.i];

			int ready = !(BIT(cell_counter, 1) && !BIT(cur_live.cell_counter, 1) && (cur_live.bit_counter == 9));

			if (!ready) {
				// load write shift register
				cur_live.shift_reg_write = GCR_ENCODE(cur_live.e, cur_live.i);

				if (LOG) logerror("%s load write shift register %03x\n",cur_live.tm.as_string(),cur_live.shift_reg_write);
			} else if (BIT(cell_counter, 1) && !BIT(cur_live.cell_counter, 1)) {
				// clock write shift register
				cur_live.shift_reg_write <<= 1;
				cur_live.shift_reg_write &= 0x3ff;

				if (LOG) logerror("%s write shift << %03x\n",cur_live.tm.as_string(),cur_live.shift_reg_write);
			}

			int error = !(BIT(cur_live.e, 3) || ready);

			if (ready != cur_live.ready) {
				if (LOG) logerror("%s READY %u\n", cur_live.tm.as_string(),ready);
				cur_live.ready = ready;
				syncpoint = true;
			}

			if (sync != cur_live.sync) {
				if (LOG) logerror("%s SYNC %u\n", cur_live.tm.as_string(),sync);
				cur_live.sync = sync;
				syncpoint = true;
			}

			if (error != cur_live.error) {
				cur_live.error = error;
				syncpoint = true;
			}

			if (syncpoint) {
				commit(cur_live.tm);

				cur_live.tm += m_period;
				live_delay(RUNNING_SYNCPOINT);
				return;
			}

			cur_live.tm += m_period;
			break;
		}

		case RUNNING_SYNCPOINT: {
			m_write_ready(cur_live.ready);
			m_write_sync(cur_live.sync);
			m_write_error(cur_live.error);

			cur_live.state = RUNNING;
			checkpoint();
			break;
		}
		}
	}
}
示例#3
0
void c8050_fdc_t::live_run(const attotime &limit)
{
	if(cur_live.state == IDLE || cur_live.next_state != -1)
		return;

	for(;;) {
		switch(cur_live.state) {
		case RUNNING: {
			bool syncpoint = false;

			if (cur_live.tm > limit)
				return;

			// read bit
			int bit = 0;
			if (cur_live.rw_sel) {
				bit = pll_get_next_bit(cur_live.tm, get_floppy(), limit);
				if(bit < 0)
					return;
			}

			// write bit
			int write_bit = BIT(cur_live.shift_reg_write, 9);
			if (!cur_live.rw_sel) { // TODO WPS
				/*
				write precompensation

				UA5.A = UM6.Qc
				UA5.B = !(!(!BRDY && UM6.Qa) && !(BRDY && E7))
				UA5.C0 = UA4.Qb = bit clock delayed 333ns
				UA5.C1 = UA4.Qa = bit clock delayed 166ns
				UA5.C2 = UA4.Qc = bit clock delayed 499ns
				UA5.C3 = UA5.Qb = bit clock delayed 333ns

				DATA OUT = !(!BITCLK || !(UA5.Y && !(WRITE_ENABLE && !UM6.Qb)))
				*/
				if (pll_write_next_bit(write_bit, cur_live.tm, get_floppy(), limit))
					return;
			}

			// clock read shift register
			cur_live.shift_reg <<= 1;
			cur_live.shift_reg |= bit;
			cur_live.shift_reg &= 0x3ff;

			// sync
			int sync = !((cur_live.shift_reg == 0x3ff) && cur_live.rw_sel);

			// bit counter
			if (!sync) {
				cur_live.bit_counter = 0;
			} else if (cur_live.sync) {
				cur_live.bit_counter++;
				if (cur_live.bit_counter == 10) {
					cur_live.bit_counter = 0;
				}
			}

			// GCR decoder
			if (cur_live.rw_sel) {
				cur_live.i = (cur_live.rw_sel << 10) | cur_live.shift_reg;
			} else {
				cur_live.i = (cur_live.rw_sel << 10) | ((cur_live.pi & 0xf0) << 1) | (cur_live.mode_sel << 4) | (cur_live.pi & 0x0f);
			}

			cur_live.e = m_gcr_rom->base()[cur_live.i];

			// byte ready
			int ready = !(cur_live.bit_counter == 9); // 74190 _RC, should be triggered on the falling edge of the clock
			int brdy = ready; // 74190 TC

			// GCR error
			int error = !(ready || BIT(cur_live.e, 3));

			if (LOG_BITS) {
				if (cur_live.rw_sel) {
					logerror("%s cyl %u bit %u sync %u bc %u sr %03x i %03x e %02x\n",cur_live.tm.as_string(),get_floppy()->get_cyl(),bit,sync,cur_live.bit_counter,cur_live.shift_reg,cur_live.i,cur_live.e);
				} else {
					logerror("%s cyl %u writing bit %u bc %u sr %03x i %03x e %02x\n",cur_live.tm.as_string(),get_floppy()->get_cyl(),write_bit,cur_live.bit_counter,cur_live.shift_reg_write,cur_live.i,cur_live.e);
				}
			}

			if (!ready) {
				// load write shift register
				cur_live.shift_reg_write = GCR_ENCODE(cur_live.e, cur_live.i);

				if (LOG_BITS) logerror("%s load write shift register %03x\n",cur_live.tm.as_string(),cur_live.shift_reg_write);
			} else {
				// clock write shift register
				cur_live.shift_reg_write <<= 1;
				cur_live.shift_reg_write &= 0x3ff;
			}

			if (ready != cur_live.ready) {
				if (cur_live.rw_sel && !ready)
					if (LOG) logerror("%s READY %u : %02x\n", cur_live.tm.as_string(),ready,GCR_DECODE(cur_live.e, cur_live.i));
				cur_live.ready = ready;
				syncpoint = true;
			}

			if (brdy != cur_live.brdy) {
				if (LOG_MORE) logerror("%s BRDY %u\n", cur_live.tm.as_string(), brdy);
				cur_live.brdy = brdy;
				syncpoint = true;
			}

			if (sync != cur_live.sync) {
				if (LOG) logerror("%s SYNC %u\n", cur_live.tm.as_string(), sync);
				cur_live.sync = sync;
				syncpoint = true;
			}

			if (error != cur_live.error) {
				if (LOG_MORE) logerror("%s ERROR %u\n", cur_live.tm.as_string(), error);
				cur_live.error = error;
				syncpoint = true;
			}

			if (syncpoint) {
				live_delay(RUNNING_SYNCPOINT);
				return;
			}
			break;
		}

		case RUNNING_SYNCPOINT: {
			m_write_ready(cur_live.ready);
			m_write_brdy(cur_live.brdy);
			m_write_sync(cur_live.sync);
			m_write_error(cur_live.error);

			cur_live.state = RUNNING;
			checkpoint();
			break;
		}
		}
	}
}