static int gsc_capture_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct gsc_dev *gsc = video_drvdata(file);
struct gsc_pipeline *p = &gsc->pipeline;
int ret;
if (gsc_cap_active(gsc))
return -EBUSY;
if (p->disp) {
gsc_pm_qos_ctrl(gsc, GSC_QOS_ON, 267000, 200000);
media_entity_pipeline_start(&p->disp->entity, p->pipe);
} else if (p->sensor) {
media_entity_pipeline_start(&p->sensor->entity, p->pipe);
} else {
gsc_err("Error pipeline");
return -EPIPE;
}
ret = gsc_cap_link_validate(gsc);
if (ret)
return ret;
gsc_hw_set_sw_reset(gsc);
ret= gsc_wait_reset(gsc);
if (ret < 0) {
gsc_err("gscaler s/w reset timeout");
return ret;
}
gsc_hw_set_output_buf_mask_all(gsc);
return vb2_streamon(&gsc->cap.vbq, type);
}
static int gsc_capture_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct gsc_dev *gsc = video_drvdata(file);
struct gsc_pipeline *p = &gsc->pipeline;
int ret;
if (gsc_cap_active(gsc))
return -EBUSY;
if (p->disp) {
media_entity_pipeline_start(&p->disp->entity, p->pipe);
} else if (p->sensor) {
media_entity_pipeline_start(&p->sensor->entity, p->pipe);
} else {
gsc_err("Error pipeline");
return -EPIPE;
}
ret = gsc_cap_link_validate(gsc);
if (ret)
return ret;
return vb2_streamon(&gsc->cap.vbq, type);
}
static int isp_video_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct fimc_isp *isp = video_drvdata(file);
struct exynos_video_entity *ve = &isp->video_capture.ve;
struct media_entity *me = &ve->vdev.entity;
int ret;
ret = media_entity_pipeline_start(me, &ve->pipe->mp);
if (ret < 0)
return ret;
ret = isp_video_pipeline_validate(isp);
if (ret < 0)
goto p_stop;
ret = vb2_ioctl_streamon(file, priv, type);
if (ret < 0)
goto p_stop;
isp->video_capture.streaming = 1;
return 0;
p_stop:
media_entity_pipeline_stop(me);
return ret;
}
static int fimc_lite_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct fimc_lite *fimc = video_drvdata(file);
struct media_entity *entity = &fimc->ve.vdev.entity;
int ret;
if (fimc_lite_active(fimc))
return -EBUSY;
ret = media_entity_pipeline_start(entity, &fimc->ve.pipe->mp);
if (ret < 0)
return ret;
ret = fimc_pipeline_validate(fimc);
if (ret < 0)
goto err_p_stop;
fimc->sensor = fimc_find_remote_sensor(&fimc->subdev.entity);
ret = vb2_ioctl_streamon(file, priv, type);
if (!ret) {
fimc->streaming = true;
return ret;
}
err_p_stop:
media_entity_pipeline_stop(entity);
return 0;
}
static int xvip_dma_start_streaming(struct vb2_queue *vq, unsigned int count)
{
struct xvip_dma *dma = vb2_get_drv_priv(vq);
struct xvip_pipeline *pipe;
int ret;
dma->sequence = 0;
/*
* Start streaming on the pipeline. No link touching an entity in the
* pipeline can be activated or deactivated once streaming is started.
*
* Use the pipeline object embedded in the first DMA object that starts
* streaming.
*/
pipe = dma->video.entity.pipe
? to_xvip_pipeline(&dma->video.entity) : &dma->pipe;
ret = media_entity_pipeline_start(&dma->video.entity, &pipe->pipe);
if (ret < 0)
return ret;
/* Verify that the configured format matches the output of the
* connected subdev.
*/
ret = xvip_dma_verify_format(dma);
if (ret < 0)
goto error;
ret = xvip_pipeline_prepare(pipe, dma);
if (ret < 0)
goto error;
/* Start the DMA engine. This must be done before starting the blocks
* in the pipeline to avoid DMA synchronization issues.
*/
dma_async_issue_pending(dma->dma);
/* Start the pipeline. */
xvip_pipeline_set_stream(pipe, true);
return 0;
error:
media_entity_pipeline_stop(&dma->video.entity);
return ret;
}
static int fimc_cap_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_pipeline *p = &fimc->pipeline;
int ret;
if (fimc_capture_active(fimc))
return -EBUSY;
media_entity_pipeline_start(&p->sensor->entity, p->pipe);
if (fimc->vid_cap.user_subdev_api) {
ret = fimc_pipeline_validate(fimc);
if (ret)
return ret;
}
return vb2_streamon(&fimc->vid_cap.vbq, type);
}
static int fimc_lite_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct fimc_lite *fimc = video_drvdata(file);
struct v4l2_subdev *sensor = fimc->pipeline.subdevs[IDX_SENSOR];
struct fimc_pipeline *p = &fimc->pipeline;
int ret;
if (fimc_lite_active(fimc))
return -EBUSY;
ret = media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
if (ret < 0)
return ret;
ret = fimc_pipeline_validate(fimc);
if (ret) {
media_entity_pipeline_stop(&sensor->entity);
return ret;
}
return vb2_streamon(&fimc->vb_queue, type);
}
static int fimc_cap_streamon(struct file *file, void *priv,
enum v4l2_buf_type type)
{
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_pipeline *p = &fimc->pipeline;
struct v4l2_subdev *sd = p->subdevs[IDX_SENSOR];
int ret;
if (fimc_capture_active(fimc))
return -EBUSY;
ret = media_entity_pipeline_start(&sd->entity, p->m_pipeline);
if (ret < 0)
return ret;
if (fimc->vid_cap.user_subdev_api) {
ret = fimc_pipeline_validate(fimc);
if (ret < 0) {
media_entity_pipeline_stop(&sd->entity);
return ret;
}
}
return vb2_streamon(&fimc->vid_cap.vbq, type);
}
/*
* Stream management
*
* Every ISS pipeline has a single input and a single output. The input can be
* either a sensor or a video node. The output is always a video node.
*
* As every pipeline has an output video node, the ISS video objects at the
* pipeline output stores the pipeline state. It tracks the streaming state of
* both the input and output, as well as the availability of buffers.
*
* In sensor-to-memory mode, frames are always available at the pipeline input.
* Starting the sensor usually requires I2C transfers and must be done in
* interruptible context. The pipeline is started and stopped synchronously
* to the stream on/off commands. All modules in the pipeline will get their
* subdev set stream handler called. The module at the end of the pipeline must
* delay starting the hardware until buffers are available at its output.
*
* In memory-to-memory mode, starting/stopping the stream requires
* synchronization between the input and output. ISS modules can't be stopped
* in the middle of a frame, and at least some of the modules seem to become
* busy as soon as they're started, even if they don't receive a frame start
* event. For that reason frames need to be processed in single-shot mode. The
* driver needs to wait until a frame is completely processed and written to
* memory before restarting the pipeline for the next frame. Pipelined
* processing might be possible but requires more testing.
*
* Stream start must be delayed until buffers are available at both the input
* and output. The pipeline must be started in the videobuf queue callback with
* the buffers queue spinlock held. The modules subdev set stream operation must
* not sleep.
*/
static int
iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
{
struct iss_video_fh *vfh = to_iss_video_fh(fh);
struct iss_video *video = video_drvdata(file);
struct media_entity_graph graph;
struct media_entity *entity;
enum iss_pipeline_state state;
struct iss_pipeline *pipe;
struct iss_video *far_end;
unsigned long flags;
int ret;
if (type != video->type)
return -EINVAL;
mutex_lock(&video->stream_lock);
/* Start streaming on the pipeline. No link touching an entity in the
* pipeline can be activated or deactivated once streaming is started.
*/
pipe = video->video.entity.pipe
? to_iss_pipeline(&video->video.entity) : &video->pipe;
pipe->external = NULL;
pipe->external_rate = 0;
pipe->external_bpp = 0;
pipe->entities = 0;
if (video->iss->pdata->set_constraints)
video->iss->pdata->set_constraints(video->iss, true);
ret = media_entity_pipeline_start(&video->video.entity, &pipe->pipe);
if (ret < 0)
goto err_media_entity_pipeline_start;
entity = &video->video.entity;
media_entity_graph_walk_start(&graph, entity);
while ((entity = media_entity_graph_walk_next(&graph)))
pipe->entities |= 1 << entity->id;
/* Verify that the currently configured format matches the output of
* the connected subdev.
*/
ret = iss_video_check_format(video, vfh);
if (ret < 0)
goto err_iss_video_check_format;
video->bpl_padding = ret;
video->bpl_value = vfh->format.fmt.pix.bytesperline;
/* Find the ISS video node connected at the far end of the pipeline and
* update the pipeline.
*/
far_end = iss_video_far_end(video);
if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
state = ISS_PIPELINE_STREAM_OUTPUT | ISS_PIPELINE_IDLE_OUTPUT;
pipe->input = far_end;
pipe->output = video;
} else {
if (far_end == NULL) {
ret = -EPIPE;
goto err_iss_video_check_format;
}
state = ISS_PIPELINE_STREAM_INPUT | ISS_PIPELINE_IDLE_INPUT;
pipe->input = video;
pipe->output = far_end;
}
spin_lock_irqsave(&pipe->lock, flags);
pipe->state &= ~ISS_PIPELINE_STREAM;
pipe->state |= state;
spin_unlock_irqrestore(&pipe->lock, flags);
/* Set the maximum time per frame as the value requested by userspace.
* This is a soft limit that can be overridden if the hardware doesn't
* support the request limit.
*/
if (video->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
pipe->max_timeperframe = vfh->timeperframe;
video->queue = &vfh->queue;
INIT_LIST_HEAD(&video->dmaqueue);
spin_lock_init(&video->qlock);
video->error = false;
atomic_set(&pipe->frame_number, -1);
ret = vb2_streamon(&vfh->queue, type);
if (ret < 0)
goto err_iss_video_check_format;
/* In sensor-to-memory mode, the stream can be started synchronously
* to the stream on command. In memory-to-memory mode, it will be
* started when buffers are queued on both the input and output.
*/
if (pipe->input == NULL) {
unsigned long flags;
ret = omap4iss_pipeline_set_stream(pipe,
ISS_PIPELINE_STREAM_CONTINUOUS);
if (ret < 0)
goto err_omap4iss_set_stream;
spin_lock_irqsave(&video->qlock, flags);
if (list_empty(&video->dmaqueue))
video->dmaqueue_flags |= ISS_VIDEO_DMAQUEUE_UNDERRUN;
spin_unlock_irqrestore(&video->qlock, flags);
}
mutex_unlock(&video->stream_lock);
return 0;
err_omap4iss_set_stream:
vb2_streamoff(&vfh->queue, type);
err_iss_video_check_format:
media_entity_pipeline_stop(&video->video.entity);
err_media_entity_pipeline_start:
if (video->iss->pdata->set_constraints)
video->iss->pdata->set_constraints(video->iss, false);
video->queue = NULL;
mutex_unlock(&video->stream_lock);
return ret;
}
