bool mi2s_set_codec_input_path(uint8_t channels, uint8_t size)
{
bool ret_val = MI2S_TRUE;
struct mi2s_state *mi2s = &the_mi2s_state;
mutex_lock(&the_mi2s_state.mutex_lock);
/* Put device in reset */
mi2s_reset(mi2s, CODEC_RX);
mi2s_master(mi2s, CODEC_RX, 1);
/* Enable clock crossing synchronization of WR DMA ACK */
mi2s_set_input_clk_synch(mi2s, CODEC_RX);
/* Set word type */
if (size <= WT_MAX)
mi2s_set_word_type(mi2s, CODEC_RX, size);
else
ret_val = MI2S_FALSE;
mi2s_set_input_num_channels(mi2s, CODEC_RX, channels);
/* Enable SD line */
mi2s_set_sd(mi2s, CODEC_RX, MI2S_SD_0_EN_MAP);
/* Release device from reset */
mi2s_release(mi2s, CODEC_RX);
mutex_unlock(&mi2s->mutex_lock);
mb();
return ret_val;
}
bool mi2s_set_hdmi_input_path(uint8_t channels, uint8_t size, uint8_t sd_line)
{
bool ret_val = MI2S_TRUE;
struct mi2s_state *mi2s = &the_mi2s_state;
mutex_lock(&mi2s->mutex_lock);
/* Put device in reset */
mi2s_reset(mi2s, HDMI);
mi2s_master(mi2s, HDMI, 1);
/* Set word type */
if (size <= WT_MAX)
mi2s_set_word_type(mi2s, HDMI, size);
else
ret_val = MI2S_FALSE;
/* Enable clock crossing synchronization of WR DMA ACK */
mi2s_set_input_clk_synch(mi2s, HDMI);
/* Ensure channels parameter is valid (non-zero, less than max,
* and even or mono)
*/
if ((channels > 0) && (channels <= MAX_NUM_CHANNELS_IN) &&
((channels == 1) || (channels % 2 == 0))) {
mi2s_set_input_num_channels(mi2s, HDMI, channels);
} else {
ret_val = MI2S_FALSE;
}
/* Ensure sd_line parameter is valid (0-max) */
if (sd_line < MAX_SD_LINES) {
/* Enable single SD line for Rx */
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP << sd_line));
} else {
ret_val = MI2S_FALSE;
}
/* Release device from reset */
mi2s_release(mi2s, HDMI);
mutex_unlock(&mi2s->mutex_lock);
return ret_val;
}
bool mi2s_set_hdmi_input_path(uint8_t channels, uint8_t size,
uint8_t sd_line_mask)
{
bool ret_val = MI2S_TRUE;
struct mi2s_state *mi2s = &the_mi2s_state;
u8 sd_line, num_of_sd_lines = 0;
void __iomem *baddr;
uint32_t val;
pr_debug("%s: channels = %u size = %u sd_line_mask = 0x%x\n", __func__,
channels, size, sd_line_mask);
if ((channels != 1) && (channels != MAX_NUM_CHANNELS_IN)) {
pr_err("%s: invalid number of channels. channels = %u\n",
__func__, channels);
return MI2S_FALSE;
}
if (size > WT_MAX) {
pr_err("%s: mi2s word size can not be greater than 32 bits\n",
__func__);
return MI2S_FALSE;
}
sd_line_mask &= MI2S_SD_LINE_MASK;
if (!sd_line_mask) {
pr_err("%s: Did not set any data lines to use "
" sd_line_mask =0x%x\n", __func__, sd_line_mask);
return MI2S_FALSE;
}
num_of_sd_lines = num_of_bits_set(sd_line_mask);
if (num_of_sd_lines != 1) {
pr_err("%s: for two channel input only one SD lines is"
" needed. num_of_sd_lines = %u sd_line_mask = 0x%x\n",
__func__, num_of_sd_lines, sd_line_mask);
return MI2S_FALSE;
}
/*Second argument to find_first_bit should be maximum number of
bits interested*/
sd_line = find_first_bit((unsigned long *)&sd_line_mask,
sizeof(sd_line_mask) * 8);
pr_debug("sd_line = %d\n", sd_line);
/* Ensure sd_line parameter is valid (0-max) */
if (sd_line > MAX_SD_LINES) {
pr_err("%s: Line number can not be greater than = %u\n",
__func__, MAX_SD_LINES);
return MI2S_FALSE;
}
mutex_lock(&mi2s->mutex_lock);
/* Put device in reset */
mi2s_reset(mi2s, HDMI);
mi2s_master(mi2s, HDMI, 1);
/* Set word type */
mi2s_set_word_type(mi2s, HDMI, size);
/* Enable clock crossing synchronization of WR DMA ACK */
mi2s_set_input_clk_synch(mi2s, HDMI);
/* Ensure channels parameter is valid (non-zero, less than max,
* and even or mono)
*/
mi2s_set_input_num_channels(mi2s, HDMI, channels);
mi2s_set_input_sd_line(mi2s, HDMI, sd_line);
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP << sd_line));
baddr = get_base_addr(mi2s, HDMI);
val = readl(baddr + MI2S_MODE_OFFSET);
pr_debug("%s(): MI2S_MODE = 0x%x\n", __func__, val);
val = readl(baddr + MI2S_RX_MODE_OFFSET);
pr_debug("%s(): MI2S_RX_MODE = 0x%x\n", __func__, val);
/* Release device from reset */
mi2s_release(mi2s, HDMI);
mutex_unlock(&mi2s->mutex_lock);
mb();
return ret_val;
}
bool mi2s_set_hdmi_output_path(uint8_t channels, uint8_t size,
uint8_t sd_line_mask)
{
bool ret_val = MI2S_TRUE;
struct mi2s_state *mi2s = &the_mi2s_state;
u8 sd_line, num_of_sd_lines = 0;
void __iomem *baddr;
uint32_t val;
pr_debug("%s: channels = %u size = %u sd_line_mask = 0x%x\n", __func__,
channels, size, sd_line_mask);
if ((channels == 0) || (channels > MAX_NUM_CHANNELS_OUT) ||
((channels != 1) && (channels % 2 != 0))) {
pr_err("%s: invalid number of channels. channels = %u\n",
__func__, channels);
return MI2S_FALSE;
}
sd_line_mask &= MI2S_SD_LINE_MASK;
if (!sd_line_mask) {
pr_err("%s: Did not set any data lines to use "
" sd_line_mask =0x%x\n", __func__, sd_line_mask);
return MI2S_FALSE;
}
mutex_lock(&mi2s->mutex_lock);
/* Put device in reset */
mi2s_reset(mi2s, HDMI);
mi2s_master(mi2s, HDMI, 1);
/* Set word type */
if (size <= WT_MAX)
mi2s_set_word_type(mi2s, HDMI, size);
else
ret_val = MI2S_FALSE;
/* Enable clock crossing synchronization of RD DMA ACK */
mi2s_set_output_clk_synch(mi2s, HDMI);
mi2s_set_output_num_channels(mi2s, HDMI, channels);
num_of_sd_lines = num_of_bits_set(sd_line_mask);
/*Second argument to find_first_bit should be maximum number of
bit*/
sd_line = find_first_bit((unsigned long *)&sd_line_mask,
sizeof(sd_line_mask) * 8);
pr_debug("sd_line = %d\n", sd_line);
if (channels == 1) {
if (num_of_sd_lines != 1) {
pr_err("%s: for one channel only one SD lines is"
" needed. num_of_sd_lines = %u\n",
__func__, num_of_sd_lines);
ret_val = MI2S_FALSE;
goto error;
}
if (sd_line != 0) {
pr_err("%s: for one channel tx, need to use SD_0 "
"sd_line = %u\n", __func__, sd_line);
ret_val = MI2S_FALSE;
goto error;
}
/* Enable SD line 0 for Tx (only option for
* mono audio)
*/
mi2s_set_sd(mi2s, HDMI, MI2S_SD_0_EN_MAP | MI2S_SD_0_TX_MAP);
} else if (channels == 2) {
if (num_of_sd_lines != 1) {
pr_err("%s: for two channel only one SD lines is"
" needed. num_of_sd_lines = %u\n",
__func__, num_of_sd_lines);
ret_val = MI2S_FALSE;
goto error;
}
/* Enable single SD line for Tx */
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP << sd_line) |
(MI2S_SD_0_TX_MAP << sd_line));
/* Set 2-channel mapping */
mi2s_set_output_2ch_map(mi2s, HDMI, sd_line);
} else if (channels == 4) {
if (num_of_sd_lines != 2) {
pr_err("%s: for 4 channels two SD lines are"
" needed. num_of_sd_lines = %u\\n",
__func__, num_of_sd_lines);
ret_val = MI2S_FALSE;
goto error;
}
if ((sd_line_mask && MI2S_SD_0) &&
(sd_line_mask && MI2S_SD_1)) {
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP |
MI2S_SD_1_EN_MAP) | (MI2S_SD_0_TX_MAP |
MI2S_SD_1_TX_MAP));
mi2s_set_output_4ch_map(mi2s, HDMI, MI2S_FALSE);
} else if ((sd_line_mask && MI2S_SD_2) &&
(sd_line_mask && MI2S_SD_3)) {
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_2_EN_MAP |
MI2S_SD_3_EN_MAP) | (MI2S_SD_2_TX_MAP |
MI2S_SD_3_TX_MAP));
mi2s_set_output_4ch_map(mi2s, HDMI, MI2S_TRUE);
} else {
pr_err("%s: for 4 channels invalid SD lines usage"
" sd_line_mask = 0x%x\n",
__func__, sd_line_mask);
ret_val = MI2S_FALSE;
goto error;
}
} else if (channels == 6) {
if (num_of_sd_lines != 3) {
pr_err("%s: for 6 channels three SD lines are"
" needed. num_of_sd_lines = %u\n",
__func__, num_of_sd_lines);
ret_val = MI2S_FALSE;
goto error;
}
if ((sd_line_mask && MI2S_SD_0) &&
(sd_line_mask && MI2S_SD_1) &&
(sd_line_mask && MI2S_SD_2)) {
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP |
MI2S_SD_1_EN_MAP | MI2S_SD_2_EN_MAP) |
(MI2S_SD_0_TX_MAP | MI2S_SD_1_TX_MAP |
MI2S_SD_2_TX_MAP));
} else if ((sd_line_mask && MI2S_SD_1) &&
(sd_line_mask && MI2S_SD_2) &&
(sd_line_mask && MI2S_SD_3)) {
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_1_EN_MAP |
MI2S_SD_2_EN_MAP | MI2S_SD_3_EN_MAP) |
(MI2S_SD_1_TX_MAP | MI2S_SD_2_TX_MAP |
MI2S_SD_3_TX_MAP));
} else {
pr_err("%s: for 6 channels invalid SD lines usage"
" sd_line_mask = 0x%x\n",
__func__, sd_line_mask);
ret_val = MI2S_FALSE;
goto error;
}
} else if (channels == 8) {
if (num_of_sd_lines != 4) {
pr_err("%s: for 8 channels four SD lines are"
" needed. num_of_sd_lines = %u\n",
__func__, num_of_sd_lines);
ret_val = MI2S_FALSE;
goto error;
}
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP |
MI2S_SD_1_EN_MAP | MI2S_SD_2_EN_MAP |
MI2S_SD_3_EN_MAP) | (MI2S_SD_0_TX_MAP |
MI2S_SD_1_TX_MAP | MI2S_SD_2_TX_MAP |
MI2S_SD_3_TX_MAP));
} else {
pr_err("%s: invalid number channels = %u\n",
__func__, channels);
ret_val = MI2S_FALSE;
goto error;
}
baddr = get_base_addr(mi2s, HDMI);
val = readl(baddr + MI2S_MODE_OFFSET);
pr_debug("%s(): MI2S_MODE = 0x%x\n", __func__, val);
val = readl(baddr + MI2S_TX_MODE_OFFSET);
pr_debug("%s(): MI2S_TX_MODE = 0x%x\n", __func__, val);
error:
/* Release device from reset */
mi2s_release(mi2s, HDMI);
mutex_unlock(&mi2s->mutex_lock);
mb();
return ret_val;
}
bool mi2s_set_hdmi_output_path(uint8_t channels, uint8_t size, uint8_t sd_line)
{
bool ret_val = MI2S_TRUE;
struct mi2s_state *mi2s = &the_mi2s_state;
mutex_lock(&mi2s->mutex_lock);
/* Put device in reset */
mi2s_reset(mi2s, HDMI);
mi2s_master(mi2s, HDMI, 1);
/* Set word type */
if (size <= WT_MAX)
mi2s_set_word_type(mi2s, HDMI, size);
else
ret_val = MI2S_FALSE;
/* Enable clock crossing synchronization of RD DMA ACK */
mi2s_set_output_clk_synch(mi2s, HDMI);
/* Ensure channels parameter is valid (non-zero),
* less than max, and even or mono)
*/
if ((channels > 0) && (channels <= MAX_NUM_CHANNELS_OUT) &&
((channels == 1) || (channels % 2 == 0)))
mi2s_set_output_num_channels(mi2s, HDMI, channels);
else
ret_val = MI2S_FALSE;
/* Ensure sd_line parameter is valid (0-max) */
if (sd_line < MAX_SD_LINES) {
if (channels == 1) {
/* Enable SD line 0 for Tx (only option for
* mono audio)
*/
mi2s_set_sd(mi2s, HDMI, MI2S_SD_0_EN_MAP |
MI2S_SD_0_TX_MAP);
} else if (channels == 2) {
/* Enable single SD line for Tx */
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP << sd_line) |
(MI2S_SD_0_TX_MAP << sd_line));
/* Set 2-channel mapping */
mi2s_set_output_2ch_map(mi2s, HDMI, sd_line);
} else if (channels == 4) {
/* Enable 2 adjacent SD lines and map accordingly.
* We map to SDs 0 & 1 or 2 & 3 depending on which
* of those ranges contain the current sd_line
* parameter
*/
if (sd_line < 2) {
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP |
MI2S_SD_1_EN_MAP) | (MI2S_SD_0_TX_MAP |
MI2S_SD_1_TX_MAP));
mi2s_set_output_4ch_map(mi2s, HDMI, MI2S_FALSE);
} else if (sd_line >= 2) {
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_2_EN_MAP |
MI2S_SD_3_EN_MAP) | (MI2S_SD_2_TX_MAP |
MI2S_SD_3_TX_MAP));
mi2s_set_output_4ch_map(mi2s, HDMI, MI2S_TRUE);
} else {
printk("err\n");
}
} else if (channels == 6) {
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP |
MI2S_SD_1_EN_MAP | MI2S_SD_2_EN_MAP) |
(MI2S_SD_0_TX_MAP | MI2S_SD_1_TX_MAP |
MI2S_SD_2_TX_MAP));
} else {
mi2s_set_sd(mi2s, HDMI, (MI2S_SD_0_EN_MAP |
MI2S_SD_1_EN_MAP | MI2S_SD_2_EN_MAP |
MI2S_SD_3_EN_MAP) | (MI2S_SD_0_TX_MAP |
MI2S_SD_1_TX_MAP | MI2S_SD_2_TX_MAP |
MI2S_SD_3_TX_MAP));
}
} else
ret_val = MI2S_FALSE;
/* Release device from reset */
mi2s_release(mi2s, HDMI);
mutex_unlock(&mi2s->mutex_lock);
return ret_val;
}
