示例#1
0
static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
{
	struct device *dev = &dsi->dev;
	struct s6e8aa0 *ctx;
	int ret;

	ctx = devm_kzalloc(dev, sizeof(struct s6e8aa0), GFP_KERNEL);
	if (!ctx)
		return -ENOMEM;

	mipi_dsi_set_drvdata(dsi, ctx);

	ctx->dev = dev;

	dsi->lanes = 4;
	dsi->format = MIPI_DSI_FMT_RGB888;
	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST
		| MIPI_DSI_MODE_VIDEO_HFP | MIPI_DSI_MODE_VIDEO_HBP
		| MIPI_DSI_MODE_VIDEO_HSA | MIPI_DSI_MODE_EOT_PACKET
		| MIPI_DSI_MODE_VSYNC_FLUSH | MIPI_DSI_MODE_VIDEO_AUTO_VERT;

	ret = s6e8aa0_parse_dt(ctx);
	if (ret < 0)
		return ret;

	ctx->supplies[0].supply = "vdd3";
	ctx->supplies[1].supply = "vci";
	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
				      ctx->supplies);
	if (ret < 0) {
		dev_err(dev, "failed to get regulators: %d\n", ret);
		return ret;
	}

	ctx->reset_gpio = devm_gpiod_get(dev, "reset");
	if (IS_ERR(ctx->reset_gpio)) {
		dev_err(dev, "cannot get reset-gpios %ld\n",
			PTR_ERR(ctx->reset_gpio));
		return PTR_ERR(ctx->reset_gpio);
	}
	ret = gpiod_direction_output(ctx->reset_gpio, 1);
	if (ret < 0) {
		dev_err(dev, "cannot configure reset-gpios %d\n", ret);
		return ret;
	}

	ctx->brightness = GAMMA_LEVEL_NUM - 1;

	drm_panel_init(&ctx->panel);
	ctx->panel.dev = dev;
	ctx->panel.funcs = &s6e8aa0_drm_funcs;

	ret = drm_panel_add(&ctx->panel);
	if (ret < 0)
		return ret;

	ret = mipi_dsi_attach(dsi);
	if (ret < 0)
		drm_panel_remove(&ctx->panel);

	return ret;
}
static int s6e3ha2_probe(struct mipi_dsi_device *dsi)
{
	struct device *dev = &dsi->dev;
	struct s6e3ha2 *ctx;
	int ret;

	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
	if (!ctx)
		return -ENOMEM;

	mipi_dsi_set_drvdata(dsi, ctx);

	ctx->dev = dev;
	ctx->desc = of_device_get_match_data(dev);

	dsi->lanes = 4;
	dsi->format = MIPI_DSI_FMT_RGB888;
	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;

	ctx->supplies[0].supply = "vdd3";
	ctx->supplies[1].supply = "vci";

	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
				      ctx->supplies);
	if (ret < 0) {
		dev_err(dev, "failed to get regulators: %d\n", ret);
		return ret;
	}

	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
	if (IS_ERR(ctx->reset_gpio)) {
		dev_err(dev, "cannot get reset-gpios %ld\n",
			PTR_ERR(ctx->reset_gpio));
		return PTR_ERR(ctx->reset_gpio);
	}

	ctx->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
	if (IS_ERR(ctx->enable_gpio)) {
		dev_err(dev, "cannot get enable-gpios %ld\n",
			PTR_ERR(ctx->enable_gpio));
		return PTR_ERR(ctx->enable_gpio);
	}

	ctx->bl_dev = backlight_device_register("s6e3ha2", dev, ctx,
						&s6e3ha2_bl_ops, NULL);
	if (IS_ERR(ctx->bl_dev)) {
		dev_err(dev, "failed to register backlight device\n");
		return PTR_ERR(ctx->bl_dev);
	}

	ctx->bl_dev->props.max_brightness = S6E3HA2_MAX_BRIGHTNESS;
	ctx->bl_dev->props.brightness = S6E3HA2_DEFAULT_BRIGHTNESS;
	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;

	drm_panel_init(&ctx->panel);
	ctx->panel.dev = dev;
	ctx->panel.funcs = &s6e3ha2_drm_funcs;

	ret = drm_panel_add(&ctx->panel);
	if (ret < 0)
		goto unregister_backlight;

	ret = mipi_dsi_attach(dsi);
	if (ret < 0)
		goto remove_panel;

	return ret;

remove_panel:
	drm_panel_remove(&ctx->panel);

unregister_backlight:
	backlight_device_unregister(ctx->bl_dev);

	return ret;
}