示例#1
0
文件: core.c 项目: mtuton/linux_u82x0
int mmc_resume_bus(struct mmc_host *host)
{
	if (!mmc_bus_needs_resume(host))
		return -EINVAL;

	printk("%s: Starting deferred resume\n", mmc_hostname(host));
	host->bus_resume_flags &= ~MMC_BUSRESUME_NEEDS_RESUME;
	mmc_bus_get(host);
	if (host->bus_ops && !host->bus_dead) {
		mmc_power_up(host);
		BUG_ON(!host->bus_ops->resume);
		host->bus_ops->resume(host);
	}

	if (host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	mmc_bus_put(host);
	printk("%s: Deferred resume completed\n", mmc_hostname(host));
	return 0;
}
示例#2
0
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (host->bus_ops && !host->bus_dead) {
		mmc_power_up(host);
		mmc_select_voltage(host, host->ocr);
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
		if (err) {
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			err = 0;
		}
	}
	mmc_bus_put(host);

	return err;
}
示例#3
0
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (mmc_bus_manual_resume(host)) {
		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
		mmc_bus_put(host);
		return 0;
	}

	if (host->bus_ops && !host->bus_dead) {
		if (!(host->pm_flags & MMC_PM_KEEP_POWER)) 
		{
			mmc_power_up(host);
			mmc_select_voltage(host, host->ocr);
		}
		
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
		
		if (err) {
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			err = 0;
		}
	}

	if(!strncmp(mmc_hostname(host),"mmc1",4))
	{
		memcpy(&host->ios,&ios_backup,sizeof(struct mmc_ios));
		mmc_set_ios(host);
		printk("\n(IOS restore)\n%s: clock %uHz busmode %u powermode %u cs %u Vdd %u  width %u timing %u\n",mmc_hostname(host), ios_backup.clock, ios_backup.bus_mode,ios_backup.power_mode, ios_backup.chip_select, ios_backup.vdd,ios_backup.bus_width, ios_backup.timing);
	}
	
	mmc_bus_put(host);

	return err;
}
示例#4
0
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (host->bus_resume_flags & MMC_BUSRESUME_MANUAL_RESUME) {
		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
		mmc_bus_put(host);
		return 0;
	}

	if (host->bus_ops && !host->bus_dead) {
		mmc_power_up(host);
		mmc_select_voltage(host, host->ocr);
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
		if (err) {
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			err = 0;
		}
	}
	mmc_bus_put(host);

	/*
	 * We add a slight delay here so that resume can progress
	 * in parallel.
	 */
    /* FIH, SimonSSChang, 2010/02/26 { */
    /* Avoid resume will hang here when wifi has trun on */
    #ifdef CONFIG_FIH_FXX
    mmc_detect_change(host, 0);
    #else
	mmc_detect_change(host, 1);
    #endif
    /* } FIH, SimonSSChang, 2010/02/26 */

	return err;
}
示例#5
0
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
#if 0 // kimhyuns remove to recognize card
	// for issue fix for ecim G0100145817
	if(host->bus_dead )
#else
	if((host->bus_dead) && (host->index!=0))
#endif	
	{
		printk("No Suspend resume in case of bus-dead if init failed -- %s \r\n",__FUNCTION__);
		return 0;
	}

	mmc_bus_get(host);
	 if (host->bus_ops && !host->bus_dead) {
		if ( host->card && mmc_card_sdio(host->card)){    //ijihyun.jung -Sec VinsQ
			printk("mmc%d:mmc_resume_host: skip mmc_power_up()\n", host->index);
		} else {
			mmc_power_up(host);
	         }
		mmc_select_voltage(host, host->ocr);//cyj_dc23 -kernel 협의
		BUG_ON(!host->bus_ops->resume);
		host->bus_ops->resume(host);
	} 
	  mmc_bus_put(host); 
	
	 /* 
	  * We add a slight delay here so that resume can progress 
	 * in parallel.
	  */ 
	if ( host->card && mmc_card_sdio(host->card)) {	//ijihyun.jung -Sec VinsQ
	 	printk("mmc%d:mmc_resume_host: skip mmc_detect_change()\n", host->index);
	 }
	 else{
	 	printk("mmc%d:mmc_resume_host: excute mmc_detect_change()\n", host->index);
 		mmc_detect_change(host, 1);  
	 }
	
	return 0;
} 
示例#6
0
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (host->bus_resume_flags & MMC_BUSRESUME_MANUAL_RESUME) {
		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
		mmc_bus_put(host);
		return 0;
	}

	if (host->bus_ops && !host->bus_dead) {
		mmc_power_up(host);
		mmc_select_voltage(host, host->ocr);
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
		if (err) {
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			if (host->bus_ops->remove)
				host->bus_ops->remove(host);
			mmc_claim_host(host);
			mmc_detach_bus(host);
			mmc_release_host(host);
			/* no need to bother upper layers */
			err = 0;
		}
	}
	mmc_bus_put(host);

	/*
	 * We add a slight delay here so that resume can progress
	 * in parallel.
	 */
	mmc_detect_change(host, 1);

	return err;
}
示例#7
0
int mmc_reinit_card(struct mmc_host *host)
{
	int err = 0;
	printk(KERN_INFO "%s: %s\n", mmc_hostname(host),
		__func__);

	mmc_bus_get(host);
	if (host->bus_ops && !host->bus_dead &&
		host->bus_ops->resume) {
		if (host->card && mmc_card_sd(host->card)) {
			mmc_power_off(host);
			mdelay(5);
		}
		mmc_power_up(host);
		err = host->bus_ops->resume(host);
	}

	mmc_bus_put(host);
	printk(KERN_INFO "%s: %s return %d\n", mmc_hostname(host),
		__func__, err);
	return err;
}
示例#8
0
文件: core.c 项目: CL0SeY/i957kernel
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (mmc_bus_manual_resume(host)) {
		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
		mmc_bus_put(host);
		return 0;
	}

	if (host->bus_ops && !host->bus_dead) {
		if (!(host->pm_flags & MMC_PM_KEEP_POWER)) {
			mmc_power_up(host);
			mmc_select_voltage(host, host->ocr);
		}
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
		if (err) {
			struct mmc_ios *ios = &host->ios;
			
			//temporary debug code
			pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
						"width %u timing %u\n",
						 mmc_hostname(host), ios->clock, ios->bus_mode,
						 ios->power_mode, ios->chip_select, ios->vdd,
						 ios->bus_width, ios->timing);
			
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			
			err = 0;
		}
	}
	mmc_bus_put(host);

	return err;
}
示例#9
0
/*
 * Resume callback from host.
 *
 * This function tries to determine if the same card is still present
 * and, if so, restore all state to it.
 */
static int mmc_sd_resume(struct mmc_host *host)
{
	int err;
#ifdef CONFIG_MMC_PARANOID_SD_INIT
	int retries;
#endif

	BUG_ON(!host);
	BUG_ON(!host->card);

	mmc_claim_host(host);
#ifdef CONFIG_MMC_PARANOID_SD_INIT
	retries = 5;
	while (retries) {
		err = mmc_sd_init_card(host, host->ocr, host->card);

		if (err) {
			printk(KERN_ERR "%s: Re-init card rc = %d (retries = %d)\n",
			       mmc_hostname(host), err, retries);
			mmc_power_off(host);
			mdelay(5);
			mmc_power_up(host);
			retries--;
			continue;
		}
		break;
	}
#else
	err = mmc_sd_init_card(host, host->ocr, host->card);
#endif
	mmc_release_host(host);

#if 0
	if (err)
		mmc_sd_err_with_deferred_resume(host);
#endif

	return err;
}
示例#10
0
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (mmc_bus_manual_resume(host)) {
		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
		mmc_bus_put(host);
		return 0;
	}

	if (host->bus_ops && !host->bus_dead) {
		mmc_power_up(host);
		mmc_select_voltage(host, host->ocr);
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
		if (err) {
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			err = 0;
		}
	}
	mmc_bus_put(host);
#if defined(CONFIG_ATH_WIFI) || defined(CONFIG_BCM_WIFI)
	if (host->index == ATH_WIFI_SDCC_INDEX) {		
		pr_info("%s: mmc_resume_host in wifi slot skip cmd7\n",   mmc_hostname(host));
		return err;
	}
#endif 

	/*
	 * We add a slight delay here so that resume can progress
	 * in parallel.
	 */
	mmc_detect_change(host, 1);

	return err;
}
示例#11
0
int mmc_resume_bus(struct mmc_host *host)
{
	unsigned long flags;
	int err = 0;

	if (!mmc_bus_needs_resume(host))
		return -EINVAL;

	printk("%s: Starting deferred resume\n", mmc_hostname(host));
	spin_lock_irqsave(&host->lock, flags);
	host->bus_resume_flags &= ~MMC_BUSRESUME_NEEDS_RESUME;
	host->rescan_disable = 0;
	spin_unlock_irqrestore(&host->lock, flags);

	mmc_bus_get(host);
	if (host->bus_ops && !host->bus_dead) {
		mmc_power_up(host);
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
	}

#ifdef CONFIG_MACH_P1
	if (!err) {
#endif /* CONFIG_MACH_P1 */
	if (host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);
#ifdef CONFIG_MACH_P1
	} else {
		printk(KERN_WARNING "%s: error %d during resume "
					"(card was removed?)\n",
					mmc_hostname(host), err);
	}
#endif /* CONFIG_MACH_P1 */

	mmc_bus_put(host);
	printk("%s: Deferred resume completed\n", mmc_hostname(host));
	return err;
}
示例#12
0
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (mmc_bus_manual_resume(host)) {
		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
		mmc_bus_put(host);
		return 0;
	}

	if (host->bus_ops && !host->bus_dead) {
		if (!(host->pm_flags & MMC_PM_KEEP_POWER)) {
			mmc_power_up(host);
			mmc_select_voltage(host, host->ocr);
		}
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
	#ifdef CONFIG_MACH_LGE_MMC_REFRESH
		if(err == 0xbcbc)
		{
			printk(KERN_WARNING "%s: error %x during resume "
					    "(retry will be done)\n",
					    mmc_hostname(host), err);

		}else
	#endif
		if (err) {
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			err = 0;
		}
	}
	mmc_bus_put(host);

	return err;
}
示例#13
0
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (mmc_bus_manual_resume(host)) {
#ifndef CONFIG_PM_RUNTIME
		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
#endif
		mmc_bus_put(host);
		return 0;
	}

	if (host->bus_ops && !host->bus_dead) {
		if (!(host->pm_flags & MMC_PM_KEEP_POWER)) {
			mmc_power_up(host);
			mmc_select_voltage(host, host->ocr);
		}
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
		if (err) {
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			err = 0;
		}
	}
	mmc_bus_put(host);

	/*
	 * We add a slight delay here so that resume can progress
	 * in parallel.
	 */
	if (!(host->pm_flags & MMC_PM_KEEP_POWER))
		mmc_detect_change(host, 1);

	return err;
}
示例#14
0
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{
	int err = 0;

	mmc_bus_get(host);
	if (host->bus_resume_flags & MMC_BUSRESUME_MANUAL_RESUME) {
		host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
		mmc_bus_put(host);
		return 0;
	}

	if (host->bus_ops && !host->bus_dead) {
		if (!(host->pm_flags & MMC_PM_KEEP_POWER)) {
			mmc_power_up(host);
			mmc_select_voltage(host, host->ocr);
		}
		BUG_ON(!host->bus_ops->resume);
		err = host->bus_ops->resume(host);
		if (err) {
			printk(KERN_WARNING "%s: error %d during resume "
					    "(card was removed?)\n",
					    mmc_hostname(host), err);
			err = 0;
		}
	}
	mmc_bus_put(host);

	/*
	 * We add a slight delay here so that resume can progress
	 * in parallel.
	 */
#if 1 /* ATHENV */
	if (!host->card || host->card->type != MMC_TYPE_SDIO) 
#endif /* ATHENV */
	mmc_detect_change(host, 1);

	return err;
}
示例#15
0
/**
 *	mmc_resume_host - resume a previously suspended host
 *	@host: mmc host
 */
int mmc_resume_host(struct mmc_host *host)
{

#ifdef CONFIG_HUAWEI_WIFI_SDCC
    struct msmsdcc_host *sdcc_host = mmc_priv(host);
#endif

    mmc_bus_get(host);
    if (host->bus_resume_flags & MMC_BUSRESUME_MANUAL_RESUME) {
        host->bus_resume_flags |= MMC_BUSRESUME_NEEDS_RESUME;
        mmc_bus_put(host);
        return 0;
    }

    if (host->bus_ops && !host->bus_dead) {
        mmc_power_up(host);
        mmc_select_voltage(host, host->ocr);
        BUG_ON(!host->bus_ops->resume);
        host->bus_ops->resume(host);
    }
    mmc_bus_put(host);

    /*
     * We add a slight delay here so that resume can progress
     * in parallel.
     */
#ifdef CONFIG_HUAWEI_WIFI_SDCC
    if (sdcc_host->pdev_id != ATH_WLAN_SLOT) {
#endif
        mmc_detect_change(host, 1);
#ifdef CONFIG_HUAWEI_WIFI_SDCC
    }
#endif

    return 0;
}
示例#16
0
int mmc_reinit(struct mmc_host *host)
{
	u32 ocr;
	int err = 0;

	/* close */
	mmc_power_off(host);

	mmc_delay(100);
	
	/* init */
	mmc_power_up(host);
	
	/* open */
	mmc_go_idle(host);
	mmc_send_if_cond(host, host->ocr_avail);
	err = mmc_send_app_op_cond(host, 0, &ocr);

	if (!err) {
		err = mmc_sd_reinit_card(host, ocr);
	}

	return err;
}
示例#17
0
void mmc_power_up_brcm(struct mmc_host *host)
{
	pr_info("%s\n",__func__);
	mmc_power_up(host);
}
示例#18
0
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;
	int extend_wakelock = 0;

	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	/* If the card was removed the bus will be marked
	 * as dead - extend the wakelock so userspace
	 * can respond */
	if (host->bus_dead)
		extend_wakelock = 1;

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
		goto out;

	mmc_claim_host(host);

	mmc_power_up(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	err = mmc_send_io_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sdio(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...then normal SD...
	 */
	err = mmc_send_app_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sd(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...and finally MMC.
	 */
	err = mmc_send_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_mmc(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	mmc_release_host(host);
	mmc_power_off(host);

out:
	/* give userspace some time to react */
#ifdef CONFIG_HUAWEI_WIFI_SDCC
    wake_unlock(&mmc_delayed_work_wake_lock);
#else
	wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);
#endif
	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}
示例#19
0
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err=0;
	unsigned long flags;
	int extend_wakelock = 0;

	printk("%s: %s start\n", mmc_hostname(host), __func__);
	spin_lock_irqsave(&host->lock, flags);

	if (host->rescan_disable) {
		spin_unlock_irqrestore(&host->lock, flags);
		return;
	}

	spin_unlock_irqrestore(&host->lock, flags);


	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	/* If the card was removed the bus will be marked
	 * as dead - extend the wakelock so userspace
	 * can respond */
	if (host->bus_dead)
		extend_wakelock = 1;

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
		goto out;

	mmc_claim_host(host);

	mmc_power_up(host);
	sdio_reset(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	err = mmc_send_io_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sdio(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...then normal SD...
	 */
	err = mmc_send_app_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sd(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...and finally MMC.
	 */
	err = mmc_send_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_mmc(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	mmc_release_host(host);
	mmc_power_off(host);

out:
	printk("%s: %s rescann is out\n", mmc_hostname(host), __func__);
	if (extend_wakelock)
		wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);
	else
		wake_unlock(&mmc_delayed_work_wake_lock);

	if (host->caps & MMC_CAP_NEEDS_POLL)
	{
		printk("%s : schedule host->detect(mmc_sd_detect)\n",__func__);
		mmc_schedule_delayed_work(&host->detect, HZ);
	}
}
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;

	mmc_bus_get(host);

	if (host->bus_ops == NULL) {
		/*
		 * Only we can add a new handler, so it's safe to
		 * release the lock here.
		 */
		mmc_bus_put(host);

		if (host->ops->get_cd && host->ops->get_cd(host) == 0)
			goto out;

		mmc_claim_host(host);

		mmc_power_up(host);
		mmc_go_idle(host);

		mmc_send_if_cond(host, host->ocr_avail);

		/*
		 * First we search for SDIO...
		 */
		err = mmc_send_io_op_cond(host, 0, &ocr);
		if (!err) {
			if (mmc_attach_sdio(host, ocr))
				mmc_power_off(host);
			goto out;
		}

		/*
		 * ...then normal SD...
		 */
		err = mmc_send_app_op_cond(host, 0, &ocr);
		if (!err) {
			if (mmc_attach_sd(host, ocr))
				mmc_power_off(host);
			goto out;
		}

		/*
		 * ...and finally MMC.
		 */
		err = mmc_send_op_cond(host, 0, &ocr);
		if (!err) {
			if (mmc_attach_mmc(host, ocr))
				mmc_power_off(host);
			goto out;
		}

		mmc_release_host(host);
		mmc_power_off(host);
	} else {
		if (host->bus_ops->detect && !host->bus_dead)
			host->bus_ops->detect(host);

		mmc_bus_put(host);
	}
out:
	/* give userspace some time to react */
	wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);

	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}
示例#21
0
/*
 * Starting point for SD card init.
 */
int mmc_attach_sd(struct mmc_host *host, u32 ocr)
{
	int err;
#ifdef CONFIG_MMC_PARANOID_SD_INIT
	int retries;
#endif

	BUG_ON(!host);
	WARN_ON(!host->claimed);

	mmc_sd_attach_bus_ops(host);

	/*
	 * We need to get OCR a different way for SPI.
	 */
	if (mmc_host_is_spi(host)) {
		mmc_go_idle(host);

		err = mmc_spi_read_ocr(host, 0, &ocr);
		if (err)
			goto err;
	}

	/*
	 * Sanity check the voltages that the card claims to
	 * support.
	 */
	if (ocr & 0x7F) {
		printk(KERN_WARNING "%s: card claims to support voltages "
		       "below the defined range. These will be ignored.\n",
		       mmc_hostname(host));
		ocr &= ~0x7F;
	}

	if (ocr & MMC_VDD_165_195) {
		printk(KERN_WARNING "%s: SD card claims to support the "
		       "incompletely defined 'low voltage range'. This "
		       "will be ignored.\n", mmc_hostname(host));
		ocr &= ~MMC_VDD_165_195;
	}

	host->ocr = mmc_select_voltage(host, ocr);

	/*
	 * Can we support the voltage(s) of the card(s)?
	 */
	if (!host->ocr) {
		err = -EINVAL;
		goto err;
	}

	/*
	 * Detect and init the card.
	 */
#ifdef CONFIG_MMC_PARANOID_SD_INIT
	retries = 5;
	while (retries) {
		err = mmc_sd_init_card(host, host->ocr, NULL);
		if (err) 
		{
			#if 1
			if (!strcmp(mmc_hostname(host), "mmc2"))
			{
				g_sd_power_dircect_ctrl = 1;
				mmc_power_off(host);
				mdelay(200);
				mmc_power_up(host);
				mmc_select_voltage(host, host->ocr);
				mdelay(10);
				g_sd_power_dircect_ctrl = 0;
				printk("\n(SD initialization) retry count=%d\n",retries);
			}
			#endif
			retries--;
			continue;
		}
		break;
	}

	if (!retries) {
		printk(KERN_ERR "%s: mmc_sd_init_card() failure (err = %d)\n",
		       mmc_hostname(host), err);
		goto err;
	}
#else
	err = mmc_sd_init_card(host, host->ocr, NULL);
	if (err)
		goto err;
#endif

	mmc_release_host(host);

	err = mmc_add_card(host->card);
	if (err)
		goto remove_card;

	return 0;

remove_card:
	mmc_remove_card(host->card);
	host->card = NULL;
	mmc_claim_host(host);
err:
	mmc_detach_bus(host);
	mmc_release_host(host);

	printk(KERN_ERR "%s: error %d whilst initialising SD card\n",
		mmc_hostname(host), err);

	return err;
}
示例#22
0
void mmc_power_reset(struct mmc_host *host, unsigned long delay)
{
	mmc_power_off(host);
	mdelay(delay);
	mmc_power_up(host);
}
示例#23
0
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;
	int extend_wakelock = 0;

	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead) {
		if(host->ops->get_cd && host->ops->get_cd(host) == 0) {
			if(host->bus_ops->remove)
				host->bus_ops->remove(host);

			mmc_claim_host(host);
			mmc_detach_bus(host);
			mmc_release_host(host);
		}
		else
			host->bus_ops->detect(host);
	}

	/* If the card was removed the bus will be marked
	 * as dead - extend the wakelock so userspace
	 * can respond */
	if (host->bus_dead)
		extend_wakelock = 1;

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
		goto out;

	mmc_claim_host(host);

	mmc_power_up(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	printk(KERN_DEBUG "*** DEBUG : First we search for SDIO...(%d)***\n", host->index);
	err = mmc_send_io_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sdio(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...then normal SD...
	 */
	printk(KERN_DEBUG "*** DEBUG : ...then normal SD...(%d) ***\n", host->index);
	err = mmc_send_app_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sd(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...and finally MMC.
	 */
	printk(KERN_DEBUG "*** DEBUG : ...and finally MMC. (%d)***\n", host->index);
	err = mmc_send_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_mmc(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	mmc_release_host(host);
	mmc_power_off(host);

out:
	if (--wakelock_refs > 0) {
		pr_debug("%s: other host want the wakelock\n", mmc_hostname(host));
	}
	else {
#if defined(CONFIG_MMC_BLOCK_DEFERRED_RESUME) && defined(CONFIG_MACH_S5PC110_P1)
		wake_lock_timeout(&mmc_delayed_work_wake_lock, 3*HZ);
#else /* CONFIG_MMC_BLOCK_DEFERRED_RESUME && CONFIG_MACH_S5PC110_P1 */
		if (extend_wakelock)
			wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);
		else
			wake_unlock(&mmc_delayed_work_wake_lock);
#endif /* CONFIG_MMC_BLOCK_DEFERRED_RESUME && CONFIG_MACH_S5PC110_P1 */
	}
	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}
示例#24
0
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;
	unsigned long flags;

	spin_lock_irqsave(&host->lock, flags);

	if (host->rescan_disable) {
		spin_unlock_irqrestore(&host->lock, flags);
		return;
	}

	spin_unlock_irqrestore(&host->lock, flags);


	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
		goto out;

	mmc_claim_host(host);

	mmc_power_up(host);
	sdio_reset(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	err = mmc_send_io_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sdio(host, ocr)) {
			mmc_claim_host(host);
			/* try SDMEM (but not MMC) even if SDIO is broken */
			if (mmc_send_app_op_cond(host, 0, &ocr))
				goto out_fail;

			if (mmc_attach_sd(host, ocr))
				mmc_power_off(host);
		}
		goto out;
	}

	/*
	 * ...then normal SD...
	 */
	err = mmc_send_app_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sd(host, ocr))
			mmc_power_off(host);
		goto out;
	}

	/*
	 * ...and finally MMC.
	 */
	err = mmc_send_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_mmc(host, ocr))
			mmc_power_off(host);
		goto out;
	}

out_fail:
	mmc_release_host(host);
	mmc_power_off(host);

out:
	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}
示例#25
0
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;
	unsigned long flags;
	int extend_wakelock = 0;

	spin_lock_irqsave(&host->lock, flags);

	if (host->rescan_disable) {
		spin_unlock_irqrestore(&host->lock, flags);
		return;
	}

	spin_unlock_irqrestore(&host->lock, flags);


	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	/* If the card was removed the bus will be marked
	 * as dead - extend the wakelock so userspace
	 * can respond */
	if (host->bus_dead)
		extend_wakelock = 1;

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
		goto out;

	mmc_claim_host(host);

	mmc_power_up(host);
	sdio_reset(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	err = mmc_send_io_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sdio(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...then normal SD...
	 */
	err = mmc_send_app_op_cond(host, 0, &ocr);
	if (!err) {
	#ifdef CONFIG_MACH_LGE_MMC_REFRESH
		if (mmc_attach_sd(host, ocr))
		{
		
			extern int omap_hsmmc_regulator_force_refresh(struct mmc_host *mmc);
						
		
			omap_hsmmc_regulator_force_refresh(host);
			printk(KERN_WARNING "%s: omap_hsmmc_regulator_force_refresh() done \n",mmc_hostname(host), err);
			
			mmc_claim_host(host);

			mmc_power_up(host);
			sdio_reset(host);
			mmc_go_idle(host);
			mmc_send_if_cond(host, host->ocr_avail);
			mmc_send_app_op_cond(host, 0, &ocr);
			if(mmc_attach_sd(host, ocr))
			{
				mmc_power_off(host);
				printk("[microSD]f=%s, line=%d, retry initialize FAIL  \n", __func__, __LINE__);	
			}
			else
				printk("[microSD]f=%s, line=%d, retry initialize SUCCESS  \n", __func__, __LINE__);	
		}
	#else
		if (mmc_attach_sd(host, ocr))
			mmc_power_off(host);
	#endif	//CONFIG_MACH_LGE_MMC_REFRESH
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...and finally MMC.
	 */
	err = mmc_send_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_mmc(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	mmc_release_host(host);
	mmc_power_off(host);

out:
	if (extend_wakelock)
		wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);
	else
		wake_unlock(&mmc_delayed_work_wake_lock);

	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}
示例#26
0
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;
	int extend_wakelock = 0;

	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	/* If the card was removed the bus will be marked
	 * as dead - extend the wakelock so userspace
	 * can respond */
	if (host->bus_dead)
		extend_wakelock = 1;

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
		goto out;

	mmc_claim_host(host);

	mmc_power_up(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	err = mmc_send_io_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sdio(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...then normal SD...
	 */
	err = mmc_send_app_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sd(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...and finally MMC.
	 */
	err = mmc_send_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_mmc(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	mmc_release_host(host);
	mmc_power_off(host);

out:
    //Div6-D1-JL-UsbPorting-00+{
    //This is used for checking that SD card is inserted or not.
    //By another project, the index number may be different. (mmc interface index)
	if (host->index == 2)
	{
		if (host->bus_ops == NULL)
        {      
			storage_state = false;		
        }
		else			  	
        {      
			storage_state = true;		
        }
	}
	//Div6-D1-JL-UsbPorting-00+}
	
	if (extend_wakelock)
		wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);
	else
		wake_unlock(&mmc_delayed_work_wake_lock);

	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}
示例#27
0
void wlan_mmc_rescan(void *wlan_host)
{
	struct mmc_host *host = ((struct sdhci_host *)wlan_host)->mmc;
	u32 ocr;
	int err;

    printk("in %s\r\n", __func__);
    
	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	mmc_claim_host(host);

	mmc_power_up(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	err = mmc_send_io_op_cond(host, 0, &ocr);
	printk("in %s, mmc_send_io_op_cond return %d\r\n", __func__, err);
	if (!err) {
		if (err = mmc_attach_sdio(host, ocr))
			mmc_power_off(host);
		printk("in %s, mmc_attach_sdio return %d\r\n", __func__, err);
		goto out;
	}

	mmc_release_host(host);
	mmc_power_off(host);

out:

	if (host->detect_complete)
		complete(host->detect_complete);

        /*
	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
        */
}
示例#28
0
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;
	int extend_wakelock = 0;

        printk("in %s\r\n", __func__);
        
	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	/* If the card was removed the bus will be marked
	 * as dead - extend the wakelock so userspace
	 * can respond */
	if (host->bus_dead)
		extend_wakelock = 1;

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
		goto out;

	mmc_claim_host(host);

	mmc_power_up(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	err = mmc_send_io_op_cond(host, 0, &ocr);
	printk("in %s, mmc_send_io_op_cond return %d\r\n", __func__, err);
	if (!err) {
		if (mmc_attach_sdio(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...then normal SD...
	 */
	err = mmc_send_app_op_cond(host, 0, &ocr);
	printk("in %s, mmc_send_app_op_cond return %d\r\n", __func__, err);
	if (!err) {
		if (mmc_attach_sd(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...and finally MMC.
	 */
	err = mmc_send_op_cond(host, 0, &ocr);
	printk("in %s, mmc_send_op_cond return %d\r\n", __func__, err);
	if (!err) {
		if (mmc_attach_mmc(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	mmc_release_host(host);
	mmc_power_off(host);

out:
	if (extend_wakelock)
		wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);
	else
		wake_unlock(&mmc_delayed_work_wake_lock);

	if (host->detect_complete)
		complete(host->detect_complete);
//     sunbingtong_101016_begin not polling
//	if (host->caps & MMC_CAP_NEEDS_POLL)
//		mmc_schedule_delayed_work(&host->detect, HZ);
//     sunbingtong_101016_end not polling
}
示例#29
0
文件: core.c 项目: robacklin/ts4700
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;

	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead)
		host->bus_ops->detect(host);

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

		/*
		 * Only we can add a new handler, so it's safe to
		 * release the lock here.
		 */
		mmc_bus_put(host);

		if (host->ops->get_cd && host->ops->get_cd(host) == 0)
			goto out;

		mmc_claim_host(host);

		mmc_power_up(host);
		mmc_go_idle(host);

		mmc_send_if_cond(host, host->ocr_avail);

		/*
		 * First we search for SDIO...
		 */
		err = mmc_send_io_op_cond(host, 0, &ocr);
		if (!err) {
			if (mmc_attach_sdio(host, ocr))
				mmc_power_off(host);
			goto out;
		}

		/*
		 * ...then normal SD...
		 */
		err = mmc_send_app_op_cond(host, 0, &ocr);
		if (!err) {
			if (mmc_attach_sd(host, ocr))
				mmc_power_off(host);
			goto out;
		}

		/*
		 * ...and finally MMC.
		 */
		err = mmc_send_op_cond(host, 0xFF800000, &ocr);
		if (!err) {
			if (mmc_attach_mmc(host, ocr))
				mmc_power_off(host);
			goto out;
		}

		mmc_release_host(host);
		mmc_power_off(host);

out:
	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}
示例#30
0
void mmc_rescan(struct work_struct *work)
{
	struct mmc_host *host =
		container_of(work, struct mmc_host, detect.work);
	u32 ocr;
	int err;
	int extend_wakelock = 0;

	mmc_bus_get(host);

	/* if there is a card registered, check whether it is still present */
	if ((host->bus_ops != NULL) && host->bus_ops->detect && !host->bus_dead) {
		if(host->ops->get_cd && host->ops->get_cd(host) == 0) {
			if(host->bus_ops->remove)
				host->bus_ops->remove(host);

			mmc_claim_host(host);
			mmc_detach_bus(host);
			mmc_release_host(host);
		}
		else
			host->bus_ops->detect(host);
	}

	/* If the card was removed the bus will be marked
	 * as dead - extend the wakelock so userspace
	 * can respond */
	if (host->bus_dead)
		extend_wakelock = 1;

	mmc_bus_put(host);


	mmc_bus_get(host);

	/* if there still is a card present, stop here */
	if (host->bus_ops != NULL) {
		mmc_bus_put(host);
		goto out;
	}

	/* detect a newly inserted card */

	/*
	 * Only we can add a new handler, so it's safe to
	 * release the lock here.
	 */
	mmc_bus_put(host);

	if (host->ops->get_cd && host->ops->get_cd(host) == 0)
		goto out;

	mmc_claim_host(host);

	mmc_power_up(host);
	mmc_go_idle(host);

	mmc_send_if_cond(host, host->ocr_avail);

	/*
	 * First we search for SDIO...
	 */
	printk(KERN_DEBUG "*** DEBUG : First we search for SDIO...(%d)***\n", host->index);
	err = mmc_send_io_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sdio(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...then normal SD...
	 */
	printk(KERN_DEBUG "*** DEBUG : ...then normal SD...(%d) ***\n", host->index);
	err = mmc_send_app_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_sd(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	/*
	 * ...and finally MMC.
	 */
	printk(KERN_DEBUG "*** DEBUG : ...and finally MMC. (%d)***\n", host->index);
	err = mmc_send_op_cond(host, 0, &ocr);
	if (!err) {
		if (mmc_attach_mmc(host, ocr))
			mmc_power_off(host);
		extend_wakelock = 1;
		goto out;
	}

	mmc_release_host(host);
	mmc_power_off(host);

out:
#if 0
	//if (extend_wakelock)
	//	wake_lock_timeout(&mmc_delayed_work_wake_lock, HZ / 2);
	//else
	//	wake_unlock(&mmc_delayed_work_wake_lock);
#else
	if (atomic_dec_return(&wakelock_refs) > 0) {
		printk(KERN_DEBUG "Another host want the wakelock : %d\n", atomic_read(&wakelock_refs));
	}
	else {
		printk(KERN_DEBUG "mmc%d: wake_lock_timeout 1sec %d\n", host->index, atomic_read(&wakelock_refs));
		wake_lock_timeout(&mmc_delayed_work_wake_lock, msecs_to_jiffies(1000));
	}
#endif

	if (host->caps & MMC_CAP_NEEDS_POLL)
		mmc_schedule_delayed_work(&host->detect, HZ);
}