/**
* mnt_context_next_umount:
* @cxt: context
* @itr: iterator
* @fs: returns the current filesystem
* @mntrc: returns the return code from mnt_context_umount()
* @ignored: returns 1 for not matching
*
* This function tries to umount the next filesystem from mtab (as returned by
* mnt_context_get_mtab()).
*
* You can filter out filesystems by:
* mnt_context_set_options_pattern() to simulate umount -a -O pattern
* mnt_context_set_fstype_pattern() to simulate umount -a -t pattern
*
* If the filesystem is not mounted or does not match the defined criteria,
* then the function mnt_context_next_umount() returns zero, but the @ignored is
* non-zero. Note that the root filesystem is always ignored.
*
* If umount(2) syscall or umount.type helper failed, then the
* mnt_context_next_umount() function returns zero, but the @mntrc is non-zero.
* Use also mnt_context_get_status() to check if the filesystem was
* successfully umounted.
*
* Returns: 0 on success,
* <0 in case of error (!= umount(2) errors)
* 1 at the end of the list.
*/
int mnt_context_next_umount(struct libmnt_context *cxt,
struct libmnt_iter *itr,
struct libmnt_fs **fs,
int *mntrc,
int *ignored)
{
struct libmnt_table *mtab;
const char *tgt;
int rc;
if (ignored)
*ignored = 0;
if (mntrc)
*mntrc = 0;
if (!cxt || !fs || !itr)
return -EINVAL;
rc = mnt_context_get_mtab(cxt, &mtab);
cxt->mtab = NULL; /* do not reset mtab */
mnt_reset_context(cxt);
cxt->mtab = mtab;
if (rc)
return rc;
do {
rc = mnt_table_next_fs(mtab, itr, fs);
if (rc != 0)
return rc; /* no more filesystems (or error) */
tgt = mnt_fs_get_target(*fs);
} while (!tgt);
DBG(CXT, ul_debugobj(cxt, "next-umount: trying %s [fstype: %s, t-pattern: %s, options: %s, O-pattern: %s]", tgt,
mnt_fs_get_fstype(*fs), cxt->fstype_pattern, mnt_fs_get_options(*fs), cxt->optstr_pattern));
/* ignore filesystems which don't match options patterns */
if ((cxt->fstype_pattern && !mnt_fs_match_fstype(*fs,
cxt->fstype_pattern)) ||
/* ignore filesystems which don't match type patterns */
(cxt->optstr_pattern && !mnt_fs_match_options(*fs,
cxt->optstr_pattern))) {
if (ignored)
*ignored = 1;
DBG(CXT, ul_debugobj(cxt, "next-umount: not-match"));
return 0;
}
rc = mnt_context_set_fs(cxt, *fs);
if (rc)
return rc;
rc = mnt_context_umount(cxt);
if (mntrc)
*mntrc = rc;
return 0;
}
/* Check, if there already exists a mounted loop device on the mountpoint node
* with the same parameters.
*/
static int is_mounted_same_loopfile(struct libmnt_context *cxt,
const char *target,
const char *backing_file,
uint64_t offset)
{
struct libmnt_table *tb;
struct libmnt_iter itr;
struct libmnt_fs *fs;
struct libmnt_cache *cache;
assert(cxt);
assert(cxt->fs);
assert((cxt->flags & MNT_FL_MOUNTFLAGS_MERGED));
if (!target || !backing_file || mnt_context_get_mtab(cxt, &tb))
return 0;
DBG(CXT, mnt_debug_h(cxt, "checking if %s mounted on %s",
backing_file, target));
cache = mnt_context_get_cache(cxt);
mnt_reset_iter(&itr, MNT_ITER_BACKWARD);
/* Search for mountpoint node in mtab, procceed if any of these has the
* loop option set or the device is a loop device
*/
while (mnt_table_next_fs(tb, &itr, &fs) == 0) {
const char *src = mnt_fs_get_source(fs);
const char *opts = mnt_fs_get_user_options(fs);
char *val;
size_t len;
int res = 0;
if (!src || !mnt_fs_match_target(fs, target, cache))
continue;
if (strncmp(src, "/dev/loop", 9) == 0) {
res = loopdev_is_used((char *) src, backing_file,
offset, LOOPDEV_FL_OFFSET);
} else if (opts && (cxt->user_mountflags & MNT_MS_LOOP) &&
mnt_optstr_get_option(opts, "loop", &val, &len) == 0 && val) {
val = strndup(val, len);
res = loopdev_is_used((char *) val, backing_file,
offset, LOOPDEV_FL_OFFSET);
free(val);
}
if (res) {
DBG(CXT, mnt_debug_h(cxt, "%s already mounted", backing_file));
return 1;
}
}
return 0;
}
static int get_debugfs(char **path)
{
struct libmnt_context *cxt;
struct libmnt_table *tb;
struct libmnt_iter *itr = NULL;
struct libmnt_fs *fs;
int found = 0, ret;
cxt = mnt_new_context();
if (!cxt)
err(EXIT_FAILURE, "libmount context allocation failed");
itr = mnt_new_iter(MNT_ITER_FORWARD);
if (!itr)
err(EXIT_FAILURE, "failed to initialize libmount iterator");
if (mnt_context_get_mtab(cxt, &tb))
err(EXIT_FAILURE, "failed to read mtab");
while (mnt_table_next_fs(tb, itr, &fs) == 0) {
const char *type = mnt_fs_get_fstype(fs);
if (!strcmp(type, "debugfs")) {
found = 1;
break;
}
}
if (found) {
ret = asprintf(path, "%s/gpio", mnt_fs_get_target(fs));
if (ret < 0)
err(EXIT_FAILURE, "failed to format string");
}
mnt_free_iter(itr);
mnt_free_context(cxt);
if (!found)
return -1;
return 0;
}
static int lookup_umount_fs(struct libmnt_context *cxt)
{
int rc, loopdev = 0;
const char *tgt;
struct libmnt_table *mtab = NULL;
struct libmnt_fs *fs;
struct libmnt_cache *cache = NULL;
char *cn_tgt = NULL;
assert(cxt);
assert(cxt->fs);
DBG(CXT, mnt_debug_h(cxt, "umount: lookup FS"));
tgt = mnt_fs_get_target(cxt->fs);
if (!tgt) {
DBG(CXT, mnt_debug_h(cxt, "umount: undefined target"));
return -EINVAL;
}
/*
* The mtab file maybe huge and on systems with utab we have to merge
* userspace mount options into /proc/self/mountinfo. This all is
* expensive. The mtab filter allows to filter out entries, then
* mtab and utab are very tiny files.
*
* *but*... the filter uses mnt_fs_streq_{target,srcpath} functions
* where LABEL, UUID or symlinks are to canonicalized. It means that
* it's usable only for canonicalized stuff (e.g. kernel mountinfo).
*/
if (!cxt->mtab_writable && *tgt == '/' &&
!mnt_context_is_force(cxt) && !mnt_context_is_lazy(cxt)) {
struct stat st;
if (stat(tgt, &st) == 0 && S_ISDIR(st.st_mode)) {
/* we'll canonicalized /proc/self/mountinfo */
cache = mnt_context_get_cache(cxt);
cn_tgt = mnt_resolve_path(tgt, cache);
if (cn_tgt)
mnt_context_set_tabfilter(cxt, mtab_filter, cn_tgt);
}
}
rc = mnt_context_get_mtab(cxt, &mtab);
if (cn_tgt) {
mnt_context_set_tabfilter(cxt, NULL, NULL);
if (!cache)
free(cn_tgt);
}
if (rc) {
DBG(CXT, mnt_debug_h(cxt, "umount: failed to read mtab"));
return rc;
}
try_loopdev:
fs = mnt_table_find_target(mtab, tgt, MNT_ITER_BACKWARD);
if (!fs && mnt_context_is_swapmatch(cxt)) {
/*
* Maybe the option is source rather than target (sometimes
* people use e.g. "umount /dev/sda1")
*/
fs = mnt_table_find_source(mtab, tgt, MNT_ITER_BACKWARD);
if (fs) {
struct libmnt_fs *fs1 = mnt_table_find_target(mtab,
mnt_fs_get_target(fs),
MNT_ITER_BACKWARD);
if (!fs1) {
DBG(CXT, mnt_debug_h(cxt, "mtab is broken?!?!"));
return -EINVAL;
}
if (fs != fs1) {
/* Something was stacked over `file' on the
* same mount point. */
DBG(CXT, mnt_debug_h(cxt,
"umount: %s: %s is mounted "
"over it on the same point",
tgt, mnt_fs_get_source(fs1)));
return -EINVAL;
}
}
}
if (!fs && !loopdev && mnt_context_is_swapmatch(cxt)) {
/*
* Maybe the option is /path/file.img, try to convert to /dev/loopN
*/
struct stat st;
if (stat(tgt, &st) == 0 && S_ISREG(st.st_mode)) {
char *dev = NULL;
int count = loopdev_count_by_backing_file(tgt, &dev);
if (count == 1) {
DBG(CXT, mnt_debug_h(cxt,
"umount: %s --> %s (retry)", tgt, dev));
mnt_fs_set_source(cxt->fs, tgt);
mnt_fs_set_target(cxt->fs, dev);
free(dev);
tgt = mnt_fs_get_target(cxt->fs);
loopdev = 1; /* to avoid endless loop */
goto try_loopdev;
} else if (count > 1)
DBG(CXT, mnt_debug_h(cxt,
"umount: warning: %s is associated "
"with more than one loopdev", tgt));
}
}
if (!fs) {
DBG(CXT, mnt_debug_h(cxt, "umount: cannot find %s in mtab", tgt));
return 0;
}
if (fs != cxt->fs) {
/* copy from mtab to our FS description
*/
mnt_fs_set_source(cxt->fs, NULL);
mnt_fs_set_target(cxt->fs, NULL);
if (!mnt_copy_fs(cxt->fs, fs)) {
DBG(CXT, mnt_debug_h(cxt, "umount: failed to copy FS"));
return -errno;
}
DBG(CXT, mnt_debug_h(cxt, "umount: mtab applied"));
}
cxt->flags |= MNT_FL_TAB_APPLIED;
return rc;
}
/**
* mnt_context_find_umount_fs:
* @cxt: mount context
* @tgt: mountpoint, device, ...
* @pfs: returns point to filesystem
*
* Returns: 0 on success, <0 on error, 1 if target filesystem not found
*/
int mnt_context_find_umount_fs(struct libmnt_context *cxt,
const char *tgt,
struct libmnt_fs **pfs)
{
int rc;
struct libmnt_table *mtab = NULL;
struct libmnt_fs *fs;
char *loopdev = NULL;
if (pfs)
*pfs = NULL;
if (!cxt || !tgt || !pfs)
return -EINVAL;
DBG(CXT, ul_debugobj(cxt, "umount: lookup FS for '%s'", tgt));
if (!*tgt)
return 1; /* empty string is not an error */
/*
* The mount table may be huge, and on systems with utab we have to merge
* userspace mount options into /proc/self/mountinfo. This all is
* expensive. The tab filter allows to filter out entries, then
* a mount table and utab are very tiny files.
*
* *but*... the filter uses mnt_fs_streq_{target,srcpath} functions
* where LABEL, UUID or symlinks are canonicalized. It means that
* it's usable only for canonicalized stuff (e.g. kernel mountinfo).
*/
if (!mnt_context_mtab_writable(cxt) && *tgt == '/' &&
!mnt_context_is_force(cxt) && !mnt_context_is_lazy(cxt))
rc = mnt_context_get_mtab_for_target(cxt, &mtab, tgt);
else
rc = mnt_context_get_mtab(cxt, &mtab);
if (rc) {
DBG(CXT, ul_debugobj(cxt, "umount: failed to read mtab"));
return rc;
}
if (mnt_table_get_nents(mtab) == 0) {
DBG(CXT, ul_debugobj(cxt, "umount: mtab empty"));
return 1;
}
try_loopdev:
fs = mnt_table_find_target(mtab, tgt, MNT_ITER_BACKWARD);
if (!fs && mnt_context_is_swapmatch(cxt)) {
/*
* Maybe the option is source rather than target (sometimes
* people use e.g. "umount /dev/sda1")
*/
fs = mnt_table_find_source(mtab, tgt, MNT_ITER_BACKWARD);
if (fs) {
struct libmnt_fs *fs1 = mnt_table_find_target(mtab,
mnt_fs_get_target(fs),
MNT_ITER_BACKWARD);
if (!fs1) {
DBG(CXT, ul_debugobj(cxt, "mtab is broken?!?!"));
rc = -EINVAL;
goto err;
}
if (fs != fs1) {
/* Something was stacked over `file' on the
* same mount point. */
DBG(CXT, ul_debugobj(cxt,
"umount: %s: %s is mounted "
"over it on the same point",
tgt, mnt_fs_get_source(fs1)));
rc = -EINVAL;
goto err;
}
}
}
if (!fs && !loopdev && mnt_context_is_swapmatch(cxt)) {
/*
* Maybe the option is /path/file.img, try to convert to /dev/loopN
*/
struct stat st;
if (mnt_stat_mountpoint(tgt, &st) == 0 && S_ISREG(st.st_mode)) {
int count;
struct libmnt_cache *cache = mnt_context_get_cache(cxt);
const char *bf = cache ? mnt_resolve_path(tgt, cache) : tgt;
count = loopdev_count_by_backing_file(bf, &loopdev);
if (count == 1) {
DBG(CXT, ul_debugobj(cxt,
"umount: %s --> %s (retry)", tgt, loopdev));
tgt = loopdev;
goto try_loopdev;
} else if (count > 1)
DBG(CXT, ul_debugobj(cxt,
"umount: warning: %s is associated "
"with more than one loopdev", tgt));
}
}
if (pfs)
*pfs = fs;
free(loopdev);
DBG(CXT, ul_debugobj(cxt, "umount fs: %s", fs ? mnt_fs_get_target(fs) :
"<not found>"));
return fs ? 0 : 1;
err:
free(loopdev);
return rc;
}
static int lookup_umount_fs(struct libmnt_context *cxt)
{
int rc, loopdev = 0;
const char *tgt;
struct libmnt_table *mtab = NULL;
struct libmnt_fs *fs;
assert(cxt);
assert(cxt->fs);
DBG(CXT, mnt_debug_h(cxt, "umount: lookup FS"));
tgt = mnt_fs_get_target(cxt->fs);
if (!tgt) {
DBG(CXT, mnt_debug_h(cxt, "umount: undefined target"));
return -EINVAL;
}
rc = mnt_context_get_mtab(cxt, &mtab);
if (rc) {
DBG(CXT, mnt_debug_h(cxt, "umount: failed to read mtab"));
return rc;
}
try_loopdev:
fs = mnt_table_find_target(mtab, tgt, MNT_ITER_BACKWARD);
if (!fs) {
/* maybe the option is source rather than target (mountpoint) */
fs = mnt_table_find_source(mtab, tgt, MNT_ITER_BACKWARD);
if (fs) {
struct libmnt_fs *fs1 = mnt_table_find_target(mtab,
mnt_fs_get_target(fs),
MNT_ITER_BACKWARD);
if (!fs1) {
DBG(CXT, mnt_debug_h(cxt, "mtab is broken?!?!"));
return -EINVAL;
}
if (fs != fs1) {
/* Something was stacked over `file' on the
* same mount point. */
DBG(CXT, mnt_debug_h(cxt,
"umount: %s: %s is mounted "
"over it on the same point",
tgt, mnt_fs_get_source(fs1)));
return -EINVAL;
}
}
}
if (!fs && !loopdev) {
/*
* Maybe target is /path/file.img, try to convert to /dev/loopN
*/
struct stat st;
if (stat(tgt, &st) == 0 && S_ISREG(st.st_mode)) {
char *dev = NULL;
int count = loopdev_count_by_backing_file(tgt, &dev);
if (count == 1) {
DBG(CXT, mnt_debug_h(cxt,
"umount: %s --> %s (retry)", tgt, dev));
mnt_fs_set_source(cxt->fs, tgt);
mnt_fs_set_target(cxt->fs, dev);
free(dev);
tgt = mnt_fs_get_target(cxt->fs);
loopdev = 1; /* to avoid endless loop */
goto try_loopdev;
} else if (count > 1)
DBG(CXT, mnt_debug_h(cxt,
"umount: warning: %s is associated "
"with more than one loodev", tgt));
}
}
if (!fs) {
DBG(CXT, mnt_debug_h(cxt, "umount: cannot find %s in mtab", tgt));
return 0;
}
if (fs != cxt->fs) {
/* copy from mtab to our FS description
*/
mnt_fs_set_source(cxt->fs, NULL);
mnt_fs_set_target(cxt->fs, NULL);
if (!mnt_copy_fs(cxt->fs, fs)) {
DBG(CXT, mnt_debug_h(cxt, "umount: failed to copy FS"));
return -errno;
}
DBG(CXT, mnt_debug_h(cxt, "umount: mtab applied"));
}
cxt->flags |= MNT_FL_TAB_APPLIED;
return rc;
}
