示例#1
0
STATIC mp_obj_t gen_resume_and_raise(mp_obj_t self_in, mp_obj_t send_value, mp_obj_t throw_value) {
    mp_obj_t ret;
    switch (mp_obj_gen_resume(self_in, send_value, throw_value, &ret)) {
        case MP_VM_RETURN_NORMAL:
            // Optimize return w/o value in case generator is used in for loop
            if (ret == mp_const_none || ret == MP_OBJ_STOP_ITERATION) {
                return MP_OBJ_STOP_ITERATION;
            } else {
                nlr_raise(mp_obj_new_exception_args(&mp_type_StopIteration, 1, &ret));
            }

        case MP_VM_RETURN_YIELD:
            if (throw_value != MP_OBJ_NULL && mp_obj_is_subclass_fast(mp_obj_get_type(throw_value), &mp_type_GeneratorExit)) {
                nlr_raise(mp_obj_new_exception_msg(&mp_type_RuntimeError, "generator ignored GeneratorExit"));
            }
            return ret;

        case MP_VM_RETURN_EXCEPTION:
            // TODO: Optimization of returning MP_OBJ_STOP_ITERATION is really part
            // of mp_iternext() protocol, but this function is called by other methods
            // too, which may not handled MP_OBJ_STOP_ITERATION.
            if (mp_obj_is_subclass_fast(mp_obj_get_type(ret), &mp_type_StopIteration)) {
                return MP_OBJ_STOP_ITERATION;
            } else {
                nlr_raise(ret);
            }

        default:
            assert(0);
            return mp_const_none;
    }
}
示例#2
0
STATIC void *thread_entry(void *args_in) {
    // Execution begins here for a new thread.  We do not have the GIL.

    thread_entry_args_t *args = (thread_entry_args_t*)args_in;

    mp_state_thread_t ts;
    mp_thread_set_state(&ts);

    mp_stack_set_top(&ts + 1); // need to include ts in root-pointer scan
    mp_stack_set_limit(args->stack_size);

    #if MICROPY_ENABLE_PYSTACK
    // TODO threading and pystack is not fully supported, for now just make a small stack
    mp_obj_t mini_pystack[128];
    mp_pystack_init(mini_pystack, &mini_pystack[128]);
    #endif

    // set locals and globals from the calling context
    mp_locals_set(args->dict_locals);
    mp_globals_set(args->dict_globals);

    MP_THREAD_GIL_ENTER();

    // signal that we are set up and running
    mp_thread_start();

    // TODO set more thread-specific state here:
    //  mp_pending_exception? (root pointer)
    //  cur_exception (root pointer)

    DEBUG_printf("[thread] start ts=%p args=%p stack=%p\n", &ts, &args, MP_STATE_THREAD(stack_top));

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        mp_call_function_n_kw(args->fun, args->n_args, args->n_kw, args->args);
        nlr_pop();
    } else {
        // uncaught exception
        // check for SystemExit
        mp_obj_base_t *exc = (mp_obj_base_t*)nlr.ret_val;
        if (mp_obj_is_subclass_fast(MP_OBJ_FROM_PTR(exc->type), MP_OBJ_FROM_PTR(&mp_type_SystemExit))) {
            // swallow exception silently
        } else {
            // print exception out
            mp_printf(MICROPY_ERROR_PRINTER, "Unhandled exception in thread started by ");
            mp_obj_print_helper(MICROPY_ERROR_PRINTER, args->fun, PRINT_REPR);
            mp_printf(MICROPY_ERROR_PRINTER, "\n");
            mp_obj_print_exception(MICROPY_ERROR_PRINTER, MP_OBJ_FROM_PTR(exc));
        }
    }

    DEBUG_printf("[thread] finish ts=%p\n", &ts);

    // signal that we are finished
    mp_thread_finish();

    MP_THREAD_GIL_EXIT();

    return NULL;
}
示例#3
0
// Return true if exception (type or instance) is a subclass of given
// exception type.  Assumes exc_type is a subclass of BaseException, as
// defined by mp_obj_is_exception_type(exc_type).
bool mp_obj_exception_match(mp_obj_t exc, mp_const_obj_t exc_type) {
    // if exc is an instance of an exception, then extract and use its type
    if (mp_obj_is_exception_instance(exc)) {
        exc = MP_OBJ_FROM_PTR(mp_obj_get_type(exc));
    }
    return mp_obj_is_subclass_fast(exc, exc_type);
}
示例#4
0
mp_obj_t mp_obj_tuple_binary_op(mp_uint_t op, mp_obj_t lhs, mp_obj_t rhs) {
    mp_obj_tuple_t *o = lhs;
    switch (op) {
        case MP_BINARY_OP_ADD: {
            if (!mp_obj_is_subclass_fast(mp_obj_get_type(rhs), (mp_obj_t)&mp_type_tuple)) {
                return MP_OBJ_NULL; // op not supported
            }
            mp_obj_tuple_t *p = rhs;
            mp_obj_tuple_t *s = mp_obj_new_tuple(o->len + p->len, NULL);
            mp_seq_cat(s->items, o->items, o->len, p->items, p->len, mp_obj_t);
            return s;
        }
        case MP_BINARY_OP_MULTIPLY: {
            mp_int_t n;
            if (!mp_obj_get_int_maybe(rhs, &n)) {
                return MP_OBJ_NULL; // op not supported
            }
            if (n <= 0) {
                return mp_const_empty_tuple;
            }
            mp_obj_tuple_t *s = mp_obj_new_tuple(o->len * n, NULL);
            mp_seq_multiply(o->items, sizeof(*o->items), o->len, n, s->items);
            return s;
        }
        case MP_BINARY_OP_EQUAL:
        case MP_BINARY_OP_LESS:
        case MP_BINARY_OP_LESS_EQUAL:
        case MP_BINARY_OP_MORE:
        case MP_BINARY_OP_MORE_EQUAL:
            return MP_BOOL(tuple_cmp_helper(op, lhs, rhs));

        default:
            return MP_OBJ_NULL; // op not supported
    }
}
示例#5
0
STATIC mp_obj_t gen_resume_and_raise(mp_obj_t self_in, mp_obj_t send_value, mp_obj_t throw_value) {
    mp_obj_t ret;
    switch (mp_obj_gen_resume(self_in, send_value, throw_value, &ret)) {
        case MP_VM_RETURN_NORMAL:
        default:
            // Optimize return w/o value in case generator is used in for loop
            if (ret == mp_const_none || ret == MP_OBJ_STOP_ITERATION) {
                return MP_OBJ_STOP_ITERATION;
            } else {
                nlr_raise(mp_obj_new_exception_args(&mp_type_StopIteration, 1, &ret));
            }

        case MP_VM_RETURN_YIELD:
            return ret;

        case MP_VM_RETURN_EXCEPTION:
            // TODO: Optimization of returning MP_OBJ_STOP_ITERATION is really part
            // of mp_iternext() protocol, but this function is called by other methods
            // too, which may not handled MP_OBJ_STOP_ITERATION.
            if (mp_obj_is_subclass_fast(MP_OBJ_FROM_PTR(mp_obj_get_type(ret)), MP_OBJ_FROM_PTR(&mp_type_StopIteration))) {
                mp_obj_t val = mp_obj_exception_get_value(ret);
                if (val == mp_const_none) {
                    return MP_OBJ_STOP_ITERATION;
                }
            }
            nlr_raise(ret);
    }
}
示例#6
0
mp_obj_t mp_obj_tuple_binary_op(int op, mp_obj_t lhs, mp_obj_t rhs) {
    mp_obj_tuple_t *o = lhs;
    switch (op) {
        case MP_BINARY_OP_ADD: {
            if (!mp_obj_is_subclass_fast(mp_obj_get_type(rhs), (mp_obj_t)&mp_type_tuple)) {
                return MP_OBJ_NULL; // op not supported
            }
            mp_obj_tuple_t *p = rhs;
            mp_obj_tuple_t *s = mp_obj_new_tuple(o->len + p->len, NULL);
            mp_seq_cat(s->items, o->items, o->len, p->items, p->len, mp_obj_t);
            return s;
        }
        case MP_BINARY_OP_MULTIPLY: {
            if (!MP_OBJ_IS_SMALL_INT(rhs)) {
                return MP_OBJ_NULL; // op not supported
            }
            int n = MP_OBJ_SMALL_INT_VALUE(rhs);
            mp_obj_tuple_t *s = mp_obj_new_tuple(o->len * n, NULL);
            mp_seq_multiply(o->items, sizeof(*o->items), o->len, n, s->items);
            return s;
        }
        case MP_BINARY_OP_EQUAL:
        case MP_BINARY_OP_LESS:
        case MP_BINARY_OP_LESS_EQUAL:
        case MP_BINARY_OP_MORE:
        case MP_BINARY_OP_MORE_EQUAL:
            return MP_BOOL(tuple_cmp_helper(op, lhs, rhs));

        default:
            return MP_OBJ_NULL; // op not supported
    }
}
示例#7
0
inline void do_str(const char *src) {
    mp_lexer_t *lex = mp_lexer_new_from_str_len(MP_QSTR__lt_stdin_gt_, src, strlen(src), 0);
    if (lex == NULL) {
        tt_abort_msg("Lexer initialization error");
    }

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        qstr source_name = lex->source_name;
        mp_parse_node_t pn = mp_parse(lex, MP_PARSE_FILE_INPUT);
        mp_obj_t module_fun = mp_compile(pn, source_name, MP_EMIT_OPT_NONE, true);
        mp_call_function_0(module_fun);
        nlr_pop();
    } else {
        mp_obj_t exc = (mp_obj_t)nlr.ret_val;
        if (mp_obj_is_subclass_fast(mp_obj_get_type(exc), &mp_type_SystemExit)) {
            // Assume that sys.exit() is called to skip the test.
            // TODO: That can be always true, we should set up convention to
            // use specific exit code as skip indicator.
            tinytest_set_test_skipped_();
            return;
        }
        mp_obj_print_exception(&mp_plat_print, exc);
        tt_abort_msg("Uncaught exception");
    }
end:
    ;
}
示例#8
0
// return true if the given object is an exception type
bool mp_obj_is_exception_type(mp_obj_t self_in) {
    if (MP_OBJ_IS_TYPE(self_in, &mp_type_type)) {
        // optimisation when self_in is a builtin exception
        mp_obj_type_t *self = self_in;
        if (self->make_new == mp_obj_exception_make_new) {
            return true;
        }
    }
    return mp_obj_is_subclass_fast(self_in, &mp_type_BaseException);
}
示例#9
0
STATIC mp_obj_t gen_instance_close(mp_obj_t self_in) {
    mp_obj_t ret;
    switch (mp_obj_gen_resume(self_in, mp_const_none, (mp_obj_t)&mp_const_GeneratorExit_obj, &ret)) {
        case MP_VM_RETURN_YIELD:
            nlr_raise(mp_obj_new_exception_msg(&mp_type_RuntimeError, "generator ignored GeneratorExit"));

        // Swallow StopIteration & GeneratorExit (== successful close), and re-raise any other
        case MP_VM_RETURN_EXCEPTION:
            // ret should always be an instance of an exception class
            if (mp_obj_is_subclass_fast(mp_obj_get_type(ret), &mp_type_GeneratorExit) ||
                mp_obj_is_subclass_fast(mp_obj_get_type(ret), &mp_type_StopIteration)) {
                return mp_const_none;
            }
            nlr_raise(ret);

        default:
            // The only choice left is MP_VM_RETURN_NORMAL which is successful close
            return mp_const_none;
    }
}
示例#10
0
mp_obj_t tuple_binary_op(int op, mp_obj_t lhs, mp_obj_t rhs) {
    mp_obj_tuple_t *o = lhs;
    switch (op) {
        case MP_BINARY_OP_SUBSCR:
        {
#if MICROPY_ENABLE_SLICE
            if (MP_OBJ_IS_TYPE(rhs, &mp_type_slice)) {
                machine_uint_t start, stop;
                if (!m_seq_get_fast_slice_indexes(o->len, rhs, &start, &stop)) {
                    assert(0);
                }
                mp_obj_tuple_t *res = mp_obj_new_tuple(stop - start, NULL);
                m_seq_copy(res->items, o->items + start, res->len, mp_obj_t);
                return res;
            }
#endif
            uint index = mp_get_index(o->base.type, o->len, rhs, false);
            return o->items[index];
        }
        case MP_BINARY_OP_ADD:
        {
            if (!mp_obj_is_subclass_fast(mp_obj_get_type(rhs), (mp_obj_t)&mp_type_tuple)) {
                return NULL;
            }
            mp_obj_tuple_t *p = rhs;
            mp_obj_tuple_t *s = mp_obj_new_tuple(o->len + p->len, NULL);
            m_seq_cat(s->items, o->items, o->len, p->items, p->len, mp_obj_t);
            return s;
        }
        case MP_BINARY_OP_MULTIPLY:
        {
            if (!MP_OBJ_IS_SMALL_INT(rhs)) {
                return NULL;
            }
            int n = MP_OBJ_SMALL_INT_VALUE(rhs);
            mp_obj_tuple_t *s = mp_obj_new_tuple(o->len * n, NULL);
            mp_seq_multiply(o->items, sizeof(*o->items), o->len, n, s->items);
            return s;
        }
        case MP_BINARY_OP_EQUAL:
        case MP_BINARY_OP_LESS:
        case MP_BINARY_OP_LESS_EQUAL:
        case MP_BINARY_OP_MORE:
        case MP_BINARY_OP_MORE_EQUAL:
            return MP_BOOL(tuple_cmp_helper(op, lhs, rhs));
        case MP_BINARY_OP_NOT_EQUAL:
            return MP_BOOL(!tuple_cmp_helper(MP_BINARY_OP_EQUAL, lhs, rhs));

        default:
            // op not supported
            return NULL;
    }
}
STATIC void *thread_entry(void *args_in) {
    // Execution begins here for a new thread.  We do not have the GIL.

    thread_entry_args_t *args = (thread_entry_args_t*)args_in;

    mp_state_thread_t ts;
    mp_thread_set_state(&ts);

    mp_stack_set_top(&ts + 1); // need to include ts in root-pointer scan
    mp_stack_set_limit(args->stack_size);

    MP_THREAD_GIL_ENTER();

    // signal that we are set up and running
    mp_thread_start();

    // TODO set more thread-specific state here:
    //  mp_pending_exception? (root pointer)
    //  cur_exception (root pointer)
    //  dict_locals? (root pointer) uPy doesn't make a new locals dict for functions, just for classes, so it's different to CPy

    DEBUG_printf("[thread] start ts=%p args=%p stack=%p\n", &ts, &args, MP_STATE_THREAD(stack_top));

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        mp_call_function_n_kw(args->fun, args->n_args, args->n_kw, args->args);
        nlr_pop();
    } else {
        // uncaught exception
        // check for SystemExit
        mp_obj_base_t *exc = (mp_obj_base_t*)nlr.ret_val;
        if (mp_obj_is_subclass_fast(MP_OBJ_FROM_PTR(exc->type), MP_OBJ_FROM_PTR(&mp_type_SystemExit))) {
            // swallow exception silently
        } else {
            // print exception out
            mp_printf(&mp_plat_print, "Unhandled exception in thread started by ");
            mp_obj_print_helper(&mp_plat_print, args->fun, PRINT_REPR);
            mp_printf(&mp_plat_print, "\n");
            mp_obj_print_exception(&mp_plat_print, MP_OBJ_FROM_PTR(exc));
        }
    }

    DEBUG_printf("[thread] finish ts=%p\n", &ts);

    // signal that we are finished
    mp_thread_finish();

    MP_THREAD_GIL_EXIT();

    return NULL;
}
示例#12
0
// If exc is SystemExit, return value where FORCED_EXIT bit set,
// and lower 8 bits are SystemExit value. For all other exceptions,
// return 1.
STATIC int handle_uncaught_exception(mp_obj_t exc) {
    // check for SystemExit
    if (mp_obj_is_subclass_fast(mp_obj_get_type(exc), &mp_type_SystemExit)) {
        // None is an exit value of 0; an int is its value; anything else is 1
        mp_obj_t exit_val = mp_obj_exception_get_value(exc);
        mp_int_t val = 0;
        if (exit_val != mp_const_none && !mp_obj_get_int_maybe(exit_val, &val)) {
            val = 1;
        }
        return FORCED_EXIT | (val & 255);
    }

    // Report all other exceptions
    mp_obj_print_exception(&mp_stderr_print, exc);
    return 1;
}
示例#13
0
void do_str(const char *src, mp_parse_input_kind_t input_kind) {
    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        mp_lexer_t *lex = mp_lexer_new_from_str_len(MP_QSTR__lt_stdin_gt_, src, strlen(src), 0);
        qstr source_name = lex->source_name;
        mp_parse_tree_t parse_tree = mp_parse(lex, input_kind);
        mp_obj_t module_fun = mp_compile(&parse_tree, source_name, MP_EMIT_OPT_NONE, false);
        mp_call_function_0(module_fun);
        nlr_pop();
    } else {
        // uncaught exception
        if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_SystemExit)) {
            // at the moment, the value of SystemExit is unused
        } else {
            mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);
        }
    }
}
示例#14
0
STATIC mp_obj_t gen_instance_throw(uint n_args, const mp_obj_t *args) {
    mp_obj_t exc = (n_args == 2) ? args[1] : args[2];
    exc = mp_make_raise_obj(exc);
    if (mp_obj_is_subclass_fast(mp_obj_get_type(exc), &mp_type_GeneratorExit)) {
        // Throwing GeneratorExit is equivalent of calling close aka
        // GeneratorExit should be handled specially
        // TODO: Calling .close() will throw new exception instance, not one
        // given to throw, which is not ok.
        return gen_instance_close(args[0]);
    }

    mp_obj_t ret = gen_resume_and_raise(args[0], mp_const_none, exc);
    if (ret == MP_OBJ_NULL) {
        nlr_jump(mp_obj_new_exception(&mp_type_StopIteration));
    } else {
        return ret;
    }
}
示例#15
0
// parses, compiles and executes the code in the lexer
// frees the lexer before returning
// EXEC_FLAG_PRINT_EOF prints 2 EOF chars: 1 after normal output, 1 after exception output
// EXEC_FLAG_ALLOW_DEBUGGING allows debugging info to be printed after executing the code
// EXEC_FLAG_IS_REPL is used for REPL inputs (flag passed on to mp_compile)
STATIC int parse_compile_execute(mp_lexer_t *lex, mp_parse_input_kind_t input_kind, int exec_flags) {
    int ret = 0;

    mp_parse_error_kind_t parse_error_kind;
    mp_parse_node_t pn = mp_parse(lex, input_kind, &parse_error_kind);
    qstr source_name = mp_lexer_source_name(lex);

    // check for parse error
    if (pn == MP_PARSE_NODE_NULL) {
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            stdout_tx_strn("\x04", 1);
        }
        mp_parse_show_exception(lex, parse_error_kind);
        mp_lexer_free(lex);
        goto finish;
    }

    mp_lexer_free(lex);

    mp_obj_t module_fun = mp_compile(pn, source_name, MP_EMIT_OPT_NONE, exec_flags & EXEC_FLAG_IS_REPL);

    // check for compile error
    if (mp_obj_is_exception_instance(module_fun)) {
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            stdout_tx_strn("\x04", 1);
        }
        mp_obj_print_exception(module_fun);
        goto finish;
    }

    // execute code
    nlr_buf_t nlr;
    uint32_t start = HAL_GetTick();
    if (nlr_push(&nlr) == 0) {
        mp_hal_set_interrupt_char(CHAR_CTRL_C); // allow ctrl-C to interrupt us
        mp_call_function_0(module_fun);
        mp_hal_set_interrupt_char(-1); // disable interrupt
        nlr_pop();
        ret = 1;
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            stdout_tx_strn("\x04", 1);
        }
    } else {
        // uncaught exception
        // FIXME it could be that an interrupt happens just before we disable it here
        mp_hal_set_interrupt_char(-1); // disable interrupt
        // print EOF after normal output
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            stdout_tx_strn("\x04", 1);
        }
        // check for SystemExit
        if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_SystemExit)) {
            // at the moment, the value of SystemExit is unused
            ret = PYEXEC_FORCED_EXIT;
        } else {
            mp_obj_print_exception((mp_obj_t)nlr.ret_val);
            ret = 0;
        }
    }

    // display debugging info if wanted
    if ((exec_flags & EXEC_FLAG_ALLOW_DEBUGGING) && repl_display_debugging_info) {
        mp_uint_t ticks = HAL_GetTick() - start; // TODO implement a function that does this properly
        printf("took " UINT_FMT " ms\n", ticks);
        gc_collect();
        // qstr info
        {
            mp_uint_t n_pool, n_qstr, n_str_data_bytes, n_total_bytes;
            qstr_pool_info(&n_pool, &n_qstr, &n_str_data_bytes, &n_total_bytes);
            printf("qstr:\n  n_pool=" UINT_FMT "\n  n_qstr=" UINT_FMT "\n  n_str_data_bytes=" UINT_FMT "\n  n_total_bytes=" UINT_FMT "\n", n_pool, n_qstr, n_str_data_bytes, n_total_bytes);
        }

        // GC info
        {
            gc_info_t info;
            gc_info(&info);
            printf("GC:\n");
            printf("  " UINT_FMT " total\n", info.total);
            printf("  " UINT_FMT " : " UINT_FMT "\n", info.used, info.free);
            printf("  1=" UINT_FMT " 2=" UINT_FMT " m=" UINT_FMT "\n", info.num_1block, info.num_2block, info.max_block);
        }
    }

finish:
    if (exec_flags & EXEC_FLAG_PRINT_EOF) {
        stdout_tx_strn("\x04", 1);
    }

    return ret;
}
示例#16
0
// parses, compiles and executes the code in the lexer
// frees the lexer before returning
// EXEC_FLAG_PRINT_EOF prints 2 EOF chars: 1 after normal output, 1 after exception output
// EXEC_FLAG_ALLOW_DEBUGGING allows debugging info to be printed after executing the code
// EXEC_FLAG_IS_REPL is used for REPL inputs (flag passed on to mp_compile)
STATIC int parse_compile_execute(const void *source, mp_parse_input_kind_t input_kind, int exec_flags) {
    int ret = 0;
    uint32_t start = 0;

    // by default a SystemExit exception returns 0
    pyexec_system_exit = 0;

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        mp_obj_t module_fun;
        #if MICROPY_MODULE_FROZEN_MPY
        if (exec_flags & EXEC_FLAG_SOURCE_IS_RAW_CODE) {
            // source is a raw_code object, create the function
            module_fun = mp_make_function_from_raw_code(source, MP_OBJ_NULL, MP_OBJ_NULL);
        } else
        #endif
        {
            #if MICROPY_ENABLE_COMPILER
            mp_lexer_t *lex;
            if (exec_flags & EXEC_FLAG_SOURCE_IS_VSTR) {
                const vstr_t *vstr = source;
                lex = mp_lexer_new_from_str_len(MP_QSTR__lt_stdin_gt_, vstr->buf, vstr->len, 0);
            } else if (exec_flags & EXEC_FLAG_SOURCE_IS_FILENAME) {
                lex = mp_lexer_new_from_file(source);
            } else {
                lex = (mp_lexer_t*)source;
            }
            // source is a lexer, parse and compile the script
            qstr source_name = lex->source_name;
            mp_parse_tree_t parse_tree = mp_parse(lex, input_kind);
            module_fun = mp_compile(&parse_tree, source_name, MP_EMIT_OPT_NONE, exec_flags & EXEC_FLAG_IS_REPL);
            #else
            mp_raise_msg(&mp_type_RuntimeError, "script compilation not supported");
            #endif
        }

        // execute code
        mp_hal_set_interrupt_char(CHAR_CTRL_C); // allow ctrl-C to interrupt us
        start = mp_hal_ticks_ms();
        mp_call_function_0(module_fun);
        mp_hal_set_interrupt_char(-1); // disable interrupt
        nlr_pop();
        ret = 1;
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            mp_hal_stdout_tx_strn("\x04", 1);
        }
    } else {
        // uncaught exception
        // FIXME it could be that an interrupt happens just before we disable it here
        mp_hal_set_interrupt_char(-1); // disable interrupt
        // print EOF after normal output
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            mp_hal_stdout_tx_strn("\x04", 1);
        }
        // check for SystemExit
        if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_SystemExit)) {
            // at the moment, the value of SystemExit is unused
            ret = pyexec_system_exit;
        } else {
            mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);
            ret = 0;
        }
    }

    // display debugging info if wanted
    if ((exec_flags & EXEC_FLAG_ALLOW_DEBUGGING) && repl_display_debugging_info) {
        mp_uint_t ticks = mp_hal_ticks_ms() - start; // TODO implement a function that does this properly
        printf("took " UINT_FMT " ms\n", ticks);
        // qstr info
        {
            size_t n_pool, n_qstr, n_str_data_bytes, n_total_bytes;
            qstr_pool_info(&n_pool, &n_qstr, &n_str_data_bytes, &n_total_bytes);
            printf("qstr:\n  n_pool=" UINT_FMT "\n  n_qstr=" UINT_FMT "\n  "
                   "n_str_data_bytes=" UINT_FMT "\n  n_total_bytes=" UINT_FMT "\n",
                   (unsigned)n_pool, (unsigned)n_qstr, (unsigned)n_str_data_bytes, (unsigned)n_total_bytes);
        }

        #if MICROPY_ENABLE_GC
        // run collection and print GC info
        gc_collect();
        gc_dump_info();
        #endif
    }

    if (exec_flags & EXEC_FLAG_PRINT_EOF) {
        mp_hal_stdout_tx_strn("\x04", 1);
    }

    return ret;
}
示例#17
0
// parses, compiles and executes the code in the lexer
// frees the lexer before returning
// EXEC_FLAG_PRINT_EOF prints 2 EOF chars: 1 after normal output, 1 after exception output
// EXEC_FLAG_ALLOW_DEBUGGING allows debugging info to be printed after executing the code
// EXEC_FLAG_IS_REPL is used for REPL inputs (flag passed on to mp_compile)
STATIC int parse_compile_execute(const void *source, mp_parse_input_kind_t input_kind, int exec_flags) {
    int ret = 0;

    // by default a SystemExit exception returns 0
    pyexec_system_exit = 0;

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        mp_obj_t module_fun;
        #if MICROPY_MODULE_FROZEN_MPY
        if (exec_flags & EXEC_FLAG_SOURCE_IS_RAW_CODE) {
            // source is a raw_code object, create the function
            module_fun = mp_make_function_from_raw_code(source, MP_OBJ_NULL, MP_OBJ_NULL);
        } else
        #endif
        {
            #if MICROPY_ENABLE_COMPILER
            mp_lexer_t *lex;
            if (exec_flags & EXEC_FLAG_SOURCE_IS_VSTR) {
                const vstr_t *vstr = source;
                lex = mp_lexer_new_from_str_len(MP_QSTR__lt_stdin_gt_, vstr->buf, vstr->len, 0);
            } else if (exec_flags & EXEC_FLAG_SOURCE_IS_FILENAME) {
                lex = mp_lexer_new_from_file(source);
            } else {
                lex = (mp_lexer_t*)source;
            }
            // source is a lexer, parse and compile the script
            qstr source_name = lex->source_name;
            mp_parse_tree_t parse_tree = mp_parse(lex, input_kind);
            module_fun = mp_compile(&parse_tree, source_name, MP_EMIT_OPT_NONE, exec_flags & EXEC_FLAG_IS_REPL);
            #else
            mp_raise_msg(&mp_type_RuntimeError, "script compilation not supported");
            #endif
        }

        // execute code
        mp_hal_set_interrupt_char(CHAR_CTRL_C); // allow ctrl-C to interrupt us
        mp_call_function_0(module_fun);
        mp_hal_set_interrupt_char(-1); // disable interrupt
        nlr_pop();
        ret = 1;
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            mp_hal_stdout_tx_strn("\x04", 1);
        }
    } else {
        // uncaught exception
        // FIXME it could be that an interrupt happens just before we disable it here
        mp_hal_set_interrupt_char(-1); // disable interrupt
        // print EOF after normal output
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            mp_hal_stdout_tx_strn("\x04", 1);
        }
        // check for SystemExit
        if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_SystemExit)) {
            // at the moment, the value of SystemExit is unused
            ret = pyexec_system_exit;
        } else {
            mp_obj_print_exception(&mp_plat_print, (mp_obj_t)nlr.ret_val);
            ret = 0;
        }
    }

    if (exec_flags & EXEC_FLAG_PRINT_EOF) {
        mp_hal_stdout_tx_strn("\x04", 1);
    }

    return ret;
}
示例#18
0
// returns standard error codes: 0 for success, 1 for all other errors
STATIC int execute_from_lexer(mp_lexer_t *lex, mp_parse_input_kind_t input_kind, bool is_repl) {
    if (lex == NULL) {
        return 1;
    }

    if (0) {
        // just tokenise
        while (!mp_lexer_is_kind(lex, MP_TOKEN_END)) {
            mp_token_show(mp_lexer_cur(lex));
            mp_lexer_to_next(lex);
        }
        mp_lexer_free(lex);
        return 0;
    }

    mp_parse_error_kind_t parse_error_kind;
    mp_parse_node_t pn = mp_parse(lex, input_kind, &parse_error_kind);

    if (pn == MP_PARSE_NODE_NULL) {
        // parse error
        mp_parse_show_exception(lex, parse_error_kind);
        mp_lexer_free(lex);
        return 1;
    }

    qstr source_name = mp_lexer_source_name(lex);
    #if MICROPY_PY___FILE__
    if (input_kind == MP_PARSE_FILE_INPUT) {
        mp_store_global(MP_QSTR___file__, MP_OBJ_NEW_QSTR(source_name));
    }
    #endif
    mp_lexer_free(lex);

    /*
    printf("----------------\n");
    mp_parse_node_print(pn, 0);
    printf("----------------\n");
    */

    mp_obj_t module_fun = mp_compile(pn, source_name, emit_opt, is_repl);

    if (module_fun == mp_const_none) {
        // compile error
        return 1;
    }

    if (compile_only) {
        return 0;
    }

    // execute it
    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        mp_call_function_0(module_fun);
        nlr_pop();
        return 0;
    } else {
        // uncaught exception
        // check for SystemExit
        mp_obj_t exc = (mp_obj_t)nlr.ret_val;
        if (mp_obj_is_subclass_fast(mp_obj_get_type(exc), &mp_type_SystemExit)) {
            mp_obj_t exit_val = mp_obj_exception_get_value(exc);
            mp_int_t val;
            if (!mp_obj_get_int_maybe(exit_val, &val)) {
                val = 0;
            }
            exit(val);
        }
        mp_obj_print_exception((mp_obj_t)nlr.ret_val);
        return 1;
    }
}
示例#19
0
// parses, compiles and executes the code in the lexer
// frees the lexer before returning
// EXEC_FLAG_PRINT_EOF prints 2 EOF chars: 1 after normal output, 1 after exception output
// EXEC_FLAG_ALLOW_DEBUGGING allows debugging info to be printed after executing the code
// EXEC_FLAG_IS_REPL is used for REPL inputs (flag passed on to mp_compile)
STATIC int parse_compile_execute(mp_lexer_t *lex, mp_parse_input_kind_t input_kind, int exec_flags) {
    int ret = 0;
    uint32_t start = 0;

    nlr_buf_t nlr;
    if (nlr_push(&nlr) == 0) {
        // parse and compile the script
        qstr source_name = lex->source_name;
        mp_parse_node_t pn = mp_parse(lex, input_kind);
        mp_obj_t module_fun = mp_compile(pn, source_name, MP_EMIT_OPT_NONE, exec_flags & EXEC_FLAG_IS_REPL);

        // execute code
        mp_hal_set_interrupt_char(CHAR_CTRL_C); // allow ctrl-C to interrupt us
        start = HAL_GetTick();
        mp_call_function_0(module_fun);
        mp_hal_set_interrupt_char(-1); // disable interrupt
        nlr_pop();
        ret = 1;
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            mp_hal_stdout_tx_strn("\x04", 1);
        }
    } else {
        // uncaught exception
        // FIXME it could be that an interrupt happens just before we disable it here
        mp_hal_set_interrupt_char(-1); // disable interrupt
        // print EOF after normal output
        if (exec_flags & EXEC_FLAG_PRINT_EOF) {
            mp_hal_stdout_tx_strn("\x04", 1);
        }
        // check for SystemExit
        if (mp_obj_is_subclass_fast(mp_obj_get_type((mp_obj_t)nlr.ret_val), &mp_type_SystemExit)) {
            // at the moment, the value of SystemExit is unused
            ret = PYEXEC_FORCED_EXIT;
        } else {
            mp_obj_print_exception(printf_wrapper, NULL, (mp_obj_t)nlr.ret_val);
            ret = 0;
        }
    }

    // display debugging info if wanted
    if ((exec_flags & EXEC_FLAG_ALLOW_DEBUGGING) && repl_display_debugging_info) {
        mp_uint_t ticks = HAL_GetTick() - start; // TODO implement a function that does this properly
        printf("took " UINT_FMT " ms\n", ticks);
        gc_collect();
        // qstr info
        {
            mp_uint_t n_pool, n_qstr, n_str_data_bytes, n_total_bytes;
            qstr_pool_info(&n_pool, &n_qstr, &n_str_data_bytes, &n_total_bytes);
            printf("qstr:\n  n_pool=" UINT_FMT "\n  n_qstr=" UINT_FMT "\n  n_str_data_bytes=" UINT_FMT "\n  n_total_bytes=" UINT_FMT "\n", n_pool, n_qstr, n_str_data_bytes, n_total_bytes);
        }

        // GC info
        gc_dump_info();
    }

    if (exec_flags & EXEC_FLAG_PRINT_EOF) {
        mp_hal_stdout_tx_strn("\x04", 1);
    }

    return ret;
}