示例#1
0
static void msm_ehci_phy_susp_fail_work(struct work_struct *w)
{
	struct msm_hcd *mhcd = container_of(w, struct msm_hcd,
					phy_susp_fail_work);
	struct usb_hcd *hcd = mhcd_to_hcd(mhcd);

	msm_ehci_vbus_power(mhcd, 0);
	usb_remove_hcd(hcd);
	msm_hsusb_reset(mhcd);
	usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
	msm_ehci_vbus_power(mhcd, 1);
}
示例#2
0
static int __devinit ehci_msm2_probe(struct platform_device *pdev)
{
	struct usb_hcd *hcd;
	struct resource *res;
	struct msm_hcd *mhcd;
	const struct msm_usb_host_platform_data *pdata;
	char pdev_name[PDEV_NAME_LEN];
	int ret;

	dev_dbg(&pdev->dev, "ehci_msm2 probe\n");

	hcd = usb_create_hcd(&msm_hc2_driver, &pdev->dev,
				dev_name(&pdev->dev));
	if (!hcd) {
		dev_err(&pdev->dev, "Unable to create HCD\n");
		return  -ENOMEM;
	}

	hcd->irq = platform_get_irq(pdev, 0);
	if (hcd->irq < 0) {
		dev_err(&pdev->dev, "Unable to get IRQ resource\n");
		ret = hcd->irq;
		goto put_hcd;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(&pdev->dev, "Unable to get memory resource\n");
		ret = -ENODEV;
		goto put_hcd;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);
	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
	if (!hcd->regs) {
		dev_err(&pdev->dev, "ioremap failed\n");
		ret = -ENOMEM;
		goto put_hcd;
	}

	mhcd = hcd_to_mhcd(hcd);
	mhcd->dev = &pdev->dev;

	snprintf(pdev_name, PDEV_NAME_LEN, "%s.%d", pdev->name, pdev->id);
	mhcd->xo_handle = msm_xo_get(MSM_XO_TCXO_D0, pdev_name);
	if (IS_ERR(mhcd->xo_handle)) {
		dev_err(&pdev->dev, "%s not able to get the handle "
			"to vote for TCXO D0 buffer\n", __func__);
		ret = PTR_ERR(mhcd->xo_handle);
		goto unmap;
	}

	ret = msm_xo_mode_vote(mhcd->xo_handle, MSM_XO_MODE_ON);
	if (ret) {
		dev_err(&pdev->dev, "%s failed to vote for TCXO "
			"D0 buffer%d\n", __func__, ret);
		goto free_xo_handle;
	}

	ret = msm_ehci_init_clocks(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "unable to initialize clocks\n");
		ret = -ENODEV;
		goto devote_xo_handle;
	}

	ret = msm_ehci_init_vddcx(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "unable to initialize VDDCX\n");
		ret = -ENODEV;
		goto deinit_clocks;
	}

	ret = msm_ehci_config_vddcx(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
		goto deinit_vddcx;
	}

	ret = msm_ehci_ldo_init(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
		goto deinit_vddcx;
	}

	ret = msm_ehci_ldo_enable(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vreg enable failed\n");
		goto deinit_ldo;
	}

	ret = msm_ehci_init_vbus(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "unable to get vbus\n");
		goto disable_ldo;
	}

	ret = msm_hsusb_reset(mhcd);
	if (ret) {
		dev_err(&pdev->dev, "hsusb PHY initialization failed\n");
		goto vbus_deinit;
	}

	ret = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
	if (ret) {
		dev_err(&pdev->dev, "unable to register HCD\n");
		goto vbus_deinit;
	}

	pdata = mhcd->dev->platform_data;
	if (pdata && (!pdata->dock_connect_irq ||
				!irq_read_line(pdata->dock_connect_irq)))
		msm_ehci_vbus_power(mhcd, 1);

	device_init_wakeup(&pdev->dev, 1);
	wake_lock_init(&mhcd->wlock, WAKE_LOCK_SUSPEND, dev_name(&pdev->dev));
	wake_lock(&mhcd->wlock);
	INIT_WORK(&mhcd->phy_susp_fail_work, msm_ehci_phy_susp_fail_work);
	/*
	 * This pdev->dev is assigned parent of root-hub by USB core,
	 * hence, runtime framework automatically calls this driver's
	 * runtime APIs based on root-hub's state.
	 */
	/* configure pmic_gpio_irq for D+ change */
	if (pdata && pdata->pmic_gpio_dp_irq)
		mhcd->pmic_gpio_dp_irq = pdata->pmic_gpio_dp_irq;
	if (mhcd->pmic_gpio_dp_irq) {
		ret = request_threaded_irq(mhcd->pmic_gpio_dp_irq, NULL,
				msm_ehci_host_wakeup_irq,
				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
				"msm_ehci_host_wakeup", mhcd);
		if (!ret) {
			disable_irq_nosync(mhcd->pmic_gpio_dp_irq);
		} else {
			dev_err(&pdev->dev, "request_irq(%d) failed: %d\n",
					mhcd->pmic_gpio_dp_irq, ret);
			mhcd->pmic_gpio_dp_irq = 0;
		}
	}
	pm_runtime_set_active(&pdev->dev);
	pm_runtime_enable(&pdev->dev);

	//ASUS_BSP+++ BennyCheng "implement ehci3 phy power collapse mode"
	the_msm_hcd = mhcd;
	usb_ehci_phy_power_control(0);

	mutex_init(&mhcd->ehci_mutex);
	//ASUS_BSP--- BennyCheng "implement ehci3 phy power collapse mode"

	return 0;

vbus_deinit:
	msm_ehci_init_vbus(mhcd, 0);
disable_ldo:
	msm_ehci_ldo_enable(mhcd, 0);
deinit_ldo:
	msm_ehci_ldo_init(mhcd, 0);
deinit_vddcx:
	msm_ehci_init_vddcx(mhcd, 0);
deinit_clocks:
	msm_ehci_init_clocks(mhcd, 0);
devote_xo_handle:
	msm_xo_mode_vote(mhcd->xo_handle, MSM_XO_MODE_OFF);
free_xo_handle:
	msm_xo_put(mhcd->xo_handle);
unmap:
	iounmap(hcd->regs);
put_hcd:
	usb_put_hcd(hcd);

	return ret;
}
示例#3
0
static int msm_ehci_resume(struct msm_hcd *mhcd)
{
	struct usb_hcd *hcd = mhcd_to_hcd(mhcd);
	unsigned long timeout;
	unsigned temp;
	int ret;

	if (!atomic_read(&mhcd->in_lpm)) {
		dev_dbg(mhcd->dev, "%s called in !in_lpm\n", __func__);
		return 0;
	}

	//ASUS_BSP+++ BennyCheng "implement ehci3 phy power collapse mode"
	mutex_lock(&mhcd->ehci_mutex);
	//ASUS_BSP--- BennyCheng "implement ehci3 phy power collapse mode"

	if (mhcd->pmic_gpio_dp_irq_enabled) {
		disable_irq_wake(mhcd->pmic_gpio_dp_irq);
		disable_irq_nosync(mhcd->pmic_gpio_dp_irq);
		mhcd->pmic_gpio_dp_irq_enabled = 0;
	}
	wake_lock(&mhcd->wlock);

	/* Vote for TCXO when waking up the phy */
	ret = msm_xo_mode_vote(mhcd->xo_handle, MSM_XO_MODE_ON);
	if (ret)
		dev_err(mhcd->dev, "%s failed to vote for "
			"TCXO D0 buffer%d\n", __func__, ret);

	clk_prepare_enable(mhcd->core_clk);
	clk_prepare_enable(mhcd->iface_clk);

	msm_ehci_config_vddcx(mhcd, 1);

	//ASUS_BSP+++ BennyCheng "implement ehci3 phy power collapse mode"
	if (mhcd->lpm_flags & PHY_PWR_COLLAPSED) {
		msm_ehci_ldo_enable(mhcd, 1);
		mhcd->lpm_flags &= ~PHY_PWR_COLLAPSED;
	}
	//ASUS_BSP--- BennyCheng "implement ehci3 phy power collapse mode"

	temp = readl_relaxed(USB_USBCMD);
	temp &= ~ASYNC_INTR_CTRL;
	temp &= ~ULPI_STP_CTRL;
	writel_relaxed(temp, USB_USBCMD);

	if (!(readl_relaxed(USB_PORTSC) & PORTSC_PHCD))
		goto skip_phy_resume;

	temp = readl_relaxed(USB_PORTSC) & ~PORTSC_PHCD;
	writel_relaxed(temp, USB_PORTSC);

	timeout = jiffies + usecs_to_jiffies(PHY_RESUME_TIMEOUT_USEC);
	while ((readl_relaxed(USB_PORTSC) & PORTSC_PHCD) ||
			!(readl_relaxed(USB_ULPI_VIEWPORT) & ULPI_SYNC_STATE)) {
		if (time_after(jiffies, timeout)) {
			/*This is a fatal error. Reset the link and PHY*/
			dev_err(mhcd->dev, "Unable to resume USB. Resetting the h/w\n");
			msm_hsusb_reset(mhcd);
			break;
		}
		udelay(1);
	}

skip_phy_resume:

	usb_hcd_resume_root_hub(hcd);
	atomic_set(&mhcd->in_lpm, 0);

	if (mhcd->async_int) {
		mhcd->async_int = false;
		pm_runtime_put_noidle(mhcd->dev);
		enable_irq(hcd->irq);
	}

	if (atomic_read(&mhcd->pm_usage_cnt)) {
		atomic_set(&mhcd->pm_usage_cnt, 0);
		pm_runtime_put_noidle(mhcd->dev);
	}

	//ASUS_BSP+++ BennyCheng "implement ehci3 phy power collapse mode"
	mutex_unlock(&mhcd->ehci_mutex);
	//ASUS_BSP--- BennyCheng "implement ehci3 phy power collapse mode"

	dev_info(mhcd->dev, "EHCI USB exited from low power mode\n");

	return 0;
}
示例#4
0
static int msm_ehci_suspend(struct msm_hcd *mhcd)
{
	struct usb_hcd *hcd = mhcd_to_hcd(mhcd);
	unsigned long timeout;
	int ret;
	u32 portsc;

	if (atomic_read(&mhcd->in_lpm)) {
		dev_dbg(mhcd->dev, "%s called in lpm\n", __func__);
		return 0;
	}

	disable_irq(hcd->irq);

	/* Set the PHCD bit, only if it is not set by the controller.
	 * PHY may take some time or even fail to enter into low power
	 * mode (LPM). Hence poll for 500 msec and reset the PHY and link
	 * in failure case.
	 */
	portsc = readl_relaxed(USB_PORTSC);
	if (!(portsc & PORTSC_PHCD)) {
		writel_relaxed(portsc | PORTSC_PHCD,
				USB_PORTSC);

		timeout = jiffies + usecs_to_jiffies(PHY_SUSPEND_TIMEOUT_USEC);
		while (!(readl_relaxed(USB_PORTSC) & PORTSC_PHCD)) {
			if (time_after(jiffies, timeout)) {
				dev_err(mhcd->dev, "Unable to suspend PHY\n");
				msm_hsusb_reset(mhcd);
				break;
			}
			udelay(1);
		}
	}

	/*
	 * PHY has capability to generate interrupt asynchronously in low
	 * power mode (LPM). This interrupt is level triggered. So USB IRQ
	 * line must be disabled till async interrupt enable bit is cleared
	 * in USBCMD register. Assert STP (ULPI interface STOP signal) to
	 * block data communication from PHY.
	 */
	writel_relaxed(readl_relaxed(USB_USBCMD) | ASYNC_INTR_CTRL |
				ULPI_STP_CTRL, USB_USBCMD);

	/*
	 * Ensure that hardware is put in low power mode before
	 * clocks are turned OFF and VDD is allowed to minimize.
	 */
	mb();

	clk_disable_unprepare(mhcd->iface_clk);
	clk_disable_unprepare(mhcd->core_clk);

	/* usb phy does not require TCXO clock, hence vote for TCXO disable */
	ret = msm_xo_mode_vote(mhcd->xo_handle, MSM_XO_MODE_OFF);
	if (ret)
		dev_err(mhcd->dev, "%s failed to devote for "
			"TCXO D0 buffer%d\n", __func__, ret);

	msm_ehci_config_vddcx(mhcd, 0);

	atomic_set(&mhcd->in_lpm, 1);
	enable_irq(hcd->irq);
	if (mhcd->pmic_gpio_dp_irq) {
		mhcd->pmic_gpio_dp_irq_enabled = 1;
		enable_irq_wake(mhcd->pmic_gpio_dp_irq);
		enable_irq(mhcd->pmic_gpio_dp_irq);
	}
	wake_unlock(&mhcd->wlock);

	dev_info(mhcd->dev, "EHCI USB in low power mode\n");

	return 0;
}
static int msm_ehci_resume(struct msm_hcd *mhcd)
{
	struct usb_hcd *hcd = mhcd_to_hcd(mhcd);
	unsigned long timeout;
	unsigned temp;
	unsigned long flags;
	u32 func_ctrl;
	const struct msm_usb_host_platform_data *pdata;

	if (!atomic_read(&mhcd->in_lpm)) {
		dev_dbg(mhcd->dev, "%s called in !in_lpm\n", __func__);
		return 0;
	}

	/* Handles race with Async interrupt */
	disable_irq(hcd->irq);

	if (mhcd->pmic_gpio_dp_irq_enabled) {
		disable_irq_wake(mhcd->pmic_gpio_dp_irq);
		disable_irq_nosync(mhcd->pmic_gpio_dp_irq);
		mhcd->pmic_gpio_dp_irq_enabled = 0;
	}

	spin_lock_irqsave(&mhcd->wakeup_lock, flags);
	if (mhcd->async_irq_enabled) {
		disable_irq_wake(mhcd->async_irq);
		disable_irq_nosync(mhcd->async_irq);
		mhcd->async_irq_enabled = 0;
	}

	if (mhcd->wakeup_irq) {
		if (mhcd->wakeup_irq_enabled) {
			disable_irq_wake(mhcd->wakeup_irq);
			disable_irq_nosync(mhcd->wakeup_irq);
			mhcd->wakeup_irq_enabled = 0;
		}
	}
	spin_unlock_irqrestore(&mhcd->wakeup_lock, flags);

	pm_stay_awake(mhcd->dev);

	/* Vote for TCXO when waking up the phy */
	if (mhcd->xo_clk)
		clk_prepare_enable(mhcd->xo_clk);

	clk_prepare_enable(mhcd->core_clk);
	clk_prepare_enable(mhcd->iface_clk);

	msm_ehci_config_vddcx(mhcd, 1);

	temp = readl_relaxed(USB_USBCMD);
	temp &= ~ASYNC_INTR_CTRL;
	temp &= ~ULPI_STP_CTRL;
	writel_relaxed(temp, USB_USBCMD);

	if (!(readl_relaxed(USB_PORTSC) & PORTSC_PHCD))
		goto skip_phy_resume;

	temp = readl_relaxed(USB_PORTSC) & ~PORTSC_PHCD;
	writel_relaxed(temp, USB_PORTSC);

	timeout = jiffies + usecs_to_jiffies(PHY_RESUME_TIMEOUT_USEC);
	while ((readl_relaxed(USB_PORTSC) & PORTSC_PHCD) ||
			!(readl_relaxed(USB_ULPI_VIEWPORT) & ULPI_SYNC_STATE)) {
		if (time_after(jiffies, timeout)) {
			/*This is a fatal error. Reset the link and PHY*/
			dev_err(mhcd->dev, "Unable to resume USB. Resetting the h/w\n");
			msm_hsusb_reset(mhcd);
			break;
		}
		udelay(1);
	}

skip_phy_resume:
	pdata = mhcd->dev->platform_data;
	if (pdata && pdata->is_uicc) {
		/* put the controller in normal mode */
		func_ctrl = msm_ulpi_read(mhcd, ULPI_FUNC_CTRL);
		func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
		func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
		msm_ulpi_write(mhcd, func_ctrl, ULPI_FUNC_CTRL);
	}

	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
	usb_hcd_resume_root_hub(hcd);
	atomic_set(&mhcd->in_lpm, 0);

	if (atomic_read(&mhcd->pm_usage_cnt)) {
		atomic_set(&mhcd->pm_usage_cnt, 0);
		pm_runtime_put_noidle(mhcd->dev);
	}

	enable_irq(hcd->irq);
	dev_info(mhcd->dev, "EHCI USB exited from low power mode\n");

	return 0;
}
static int ehci_msm2_probe(struct platform_device *pdev)
{
	struct usb_hcd *hcd;
	struct resource *res;
	struct msm_hcd *mhcd;
	struct pinctrl_state *set_state;
	const struct msm_usb_host_platform_data *pdata;
	char pdev_name[PDEV_NAME_LEN];
	int ret;

	dev_dbg(&pdev->dev, "ehci_msm2 probe\n");

	/*
	 * Fail probe in case of uicc till userspace activates driver through
	 * sysfs entry.
	 */
	if (!uicc_card_present && pdev->dev.of_node && of_property_read_bool(
				pdev->dev.of_node, "qcom,usb2-enable-uicc"))
		return -ENODEV;

	hcd = usb_create_hcd(&ehci_msm2_hc_driver, &pdev->dev,
				dev_name(&pdev->dev));
	if (!hcd) {
		dev_err(&pdev->dev, "Unable to create HCD\n");
		return  -ENOMEM;
	}

	mhcd = hcd_to_mhcd(hcd);
	mhcd->dev = &pdev->dev;

	mhcd->xo_clk = clk_get(&pdev->dev, "xo");
	if (IS_ERR(mhcd->xo_clk)) {
		ret = PTR_ERR(mhcd->xo_clk);
		mhcd->xo_clk = NULL;
		if (ret == -EPROBE_DEFER)
			goto put_hcd;
	}

	ret = msm_ehci_init_clocks(mhcd, 1);
	if (ret)
		goto xo_put;

	if (pdev->dev.of_node) {
		dev_dbg(&pdev->dev, "device tree enabled\n");
		pdev->dev.platform_data = ehci_msm2_dt_to_pdata(pdev);
	}

	if (!pdev->dev.platform_data)
		dev_dbg(&pdev->dev, "No platform data given\n");

	pdata = pdev->dev.platform_data;

	if (!pdev->dev.dma_mask)
		pdev->dev.dma_mask = &ehci_msm_dma_mask;
	if (!pdev->dev.coherent_dma_mask)
		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);

	hcd_to_bus(hcd)->skip_resume = true;

	hcd->irq = platform_get_irq(pdev, 0);
	if (hcd->irq < 0) {
		dev_err(&pdev->dev, "Unable to get IRQ resource\n");
		ret = hcd->irq;
		goto deinit_clocks;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(&pdev->dev, "Unable to get memory resource\n");
		ret = -ENODEV;
		goto deinit_clocks;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);
	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
	if (!hcd->regs) {
		dev_err(&pdev->dev, "ioremap failed\n");
		ret = -ENOMEM;
		goto deinit_clocks;
	}


	spin_lock_init(&mhcd->wakeup_lock);

	mhcd->async_irq = platform_get_irq_byname(pdev, "async_irq");
	if (mhcd->async_irq < 0) {
		dev_dbg(&pdev->dev, "platform_get_irq for async_int failed\n");
		mhcd->async_irq = 0;
	} else {
		ret = request_irq(mhcd->async_irq, msm_async_irq,
				IRQF_TRIGGER_RISING, "msm_ehci_host", mhcd);
		if (ret) {
			dev_err(&pdev->dev, "request irq failed (ASYNC INT)\n");
			goto unmap;
		}
		disable_irq(mhcd->async_irq);
	}

	snprintf(pdev_name, PDEV_NAME_LEN, "%s.%d", pdev->name, pdev->id);
	if (mhcd->xo_clk)
		ret = clk_prepare_enable(mhcd->xo_clk);
	if (ret) {
		dev_err(&pdev->dev, "%s failed to vote for TCXO %d\n",
								__func__, ret);
		goto free_xo_handle;
	}

	/* Get pinctrl if target uses pinctrl */
	mhcd->hsusb_pinctrl = devm_pinctrl_get(&pdev->dev);
	if (IS_ERR(mhcd->hsusb_pinctrl)) {
		if (of_property_read_bool(pdev->dev.of_node, "pinctrl-names")) {
			dev_err(&pdev->dev, "Error encountered while getting pinctrl");
			ret = PTR_ERR(mhcd->hsusb_pinctrl);
			goto devote_xo_handle;
		}
		pr_debug("Target does not use pinctrl\n");
		mhcd->hsusb_pinctrl = NULL;
	}

	if (mhcd->hsusb_pinctrl) {
		set_state = pinctrl_lookup_state(mhcd->hsusb_pinctrl,
				"ehci_active");
		if (IS_ERR(set_state)) {
			pr_err("cannot get hsusb pinctrl active state\n");
			ret = PTR_ERR(set_state);
			goto devote_xo_handle;
		}
		ret = pinctrl_select_state(mhcd->hsusb_pinctrl, set_state);
		if (ret) {
			pr_err("cannot set hsusb pinctrl active state\n");
			goto devote_xo_handle;
		}
	}

	if (pdata && gpio_is_valid(pdata->resume_gpio)) {
		mhcd->resume_gpio = pdata->resume_gpio;
		ret = devm_gpio_request(&pdev->dev, mhcd->resume_gpio,
							"hsusb_resume");
		if (ret) {
			dev_err(&pdev->dev,
				"resume gpio(%d) request failed:%d\n",
				mhcd->resume_gpio, ret);
			mhcd->resume_gpio = -EINVAL;
		} else {
			/* to override ehci_bus_resume from ehci-hcd library */
			ehci_bus_resume_func = ehci_msm2_hc_driver.bus_resume;
			ehci_msm2_hc_driver.bus_resume =
				msm_ehci_bus_resume_with_gpio;
		}
	}

	if (pdata && gpio_is_valid(pdata->ext_hub_reset_gpio)) {
		ret = devm_gpio_request(&pdev->dev, pdata->ext_hub_reset_gpio,
							"hsusb_reset");
		if (ret) {
			dev_err(&pdev->dev,
				"reset gpio(%d) request failed:%d\n",
				pdata->ext_hub_reset_gpio, ret);
			goto pinctrl_sleep;
		} else {
			/* reset external hub */
			gpio_direction_output(pdata->ext_hub_reset_gpio, 0);
			/*
			 * Hub reset should be asserted for minimum 5microsec
			 * before deasserting.
			 */
			usleep_range(5, 1000);
			gpio_direction_output(pdata->ext_hub_reset_gpio, 1);
		}
	}

	spin_lock_init(&mhcd->wakeup_lock);

	ret = msm_ehci_init_vddcx(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "unable to initialize VDDCX\n");
		ret = -ENODEV;
		goto pinctrl_sleep;
	}

	ret = msm_ehci_config_vddcx(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
		goto deinit_vddcx;
	}

	ret = msm_ehci_ldo_init(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
		goto deinit_vddcx;
	}

	ret = msm_ehci_ldo_enable(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vreg enable failed\n");
		goto deinit_ldo;
	}

	ret = msm_ehci_init_vbus(mhcd, 1);
	if (ret)
		goto disable_ldo;

	hcd->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
	if (IS_ERR(hcd->phy)) {
		if (PTR_ERR(hcd->phy) == -EPROBE_DEFER) {
			dev_dbg(&pdev->dev, "usb-phy not probed yet\n");
			ret = -EPROBE_DEFER;
			goto vbus_deinit;
		}
		hcd->phy = NULL;
	}

	if (hcd->phy)
		usb_phy_init(hcd->phy);
	else if (pdata && pdata->use_sec_phy)
		mhcd->usb_phy_ctrl_reg = USB_PHY_CTRL2;
	else
		mhcd->usb_phy_ctrl_reg = USB_PHY_CTRL;

	ret = msm_hsusb_reset(mhcd);
	if (ret) {
		dev_err(&pdev->dev, "hsusb PHY initialization failed\n");
		goto vbus_deinit;
	}

	ret = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
	if (ret) {
		dev_err(&pdev->dev, "unable to register HCD\n");
		goto vbus_deinit;
	}

	pdata = mhcd->dev->platform_data;
	if (pdata && (!pdata->dock_connect_irq ||
				!irq_read_line(pdata->dock_connect_irq)))
		msm_ehci_vbus_power(mhcd, 1);

	/* For peripherals directly conneted to downstream port of root hub
	 * and require to drive suspend and resume by controller driver instead
	 * of root hub.
	 */
	if (pdata)
		mhcd->ehci.no_selective_suspend = pdata->no_selective_suspend;

	mhcd->wakeup_irq = platform_get_irq_byname(pdev, "wakeup_irq");
	if (mhcd->wakeup_irq > 0) {
		dev_dbg(&pdev->dev, "wakeup irq:%d\n", mhcd->wakeup_irq);

		irq_set_status_flags(mhcd->wakeup_irq, IRQ_NOAUTOEN);
		ret = request_irq(mhcd->wakeup_irq, msm_hsusb_wakeup_irq,
				IRQF_TRIGGER_HIGH,
				"msm_hsusb_wakeup", mhcd);
		if (ret) {
			dev_err(&pdev->dev, "request_irq(%d) failed:%d\n",
					mhcd->wakeup_irq, ret);
			mhcd->wakeup_irq = 0;
		}
	} else {
		mhcd->wakeup_irq = 0;
	}

	device_init_wakeup(&pdev->dev, 1);
	wakeup_source_init(&mhcd->ws, dev_name(&pdev->dev));
	pm_stay_awake(mhcd->dev);
	INIT_WORK(&mhcd->phy_susp_fail_work, msm_ehci_phy_susp_fail_work);
	/*
	 * This pdev->dev is assigned parent of root-hub by USB core,
	 * hence, runtime framework automatically calls this driver's
	 * runtime APIs based on root-hub's state.
	 */
	/* configure pmic_gpio_irq for D+ change */
	if (pdata && pdata->pmic_gpio_dp_irq)
		mhcd->pmic_gpio_dp_irq = pdata->pmic_gpio_dp_irq;
	if (mhcd->pmic_gpio_dp_irq) {
		ret = request_threaded_irq(mhcd->pmic_gpio_dp_irq, NULL,
				msm_ehci_host_wakeup_irq,
				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
				"msm_ehci_host_wakeup", mhcd);
		if (!ret) {
			disable_irq_nosync(mhcd->pmic_gpio_dp_irq);
		} else {
			dev_err(&pdev->dev, "request_irq(%d) failed: %d\n",
					mhcd->pmic_gpio_dp_irq, ret);
			mhcd->pmic_gpio_dp_irq = 0;
		}
	}
	pm_runtime_set_active(&pdev->dev);
	pm_runtime_enable(&pdev->dev);

	if (ehci_debugfs_init(mhcd) < 0)
		dev_err(mhcd->dev, "%s: debugfs init failed\n", __func__);

	return 0;

vbus_deinit:
	msm_ehci_init_vbus(mhcd, 0);
disable_ldo:
	msm_ehci_ldo_enable(mhcd, 0);
deinit_ldo:
	msm_ehci_ldo_init(mhcd, 0);
deinit_vddcx:
	msm_ehci_init_vddcx(mhcd, 0);
pinctrl_sleep:
	if (mhcd->hsusb_pinctrl) {
		set_state = pinctrl_lookup_state(mhcd->hsusb_pinctrl,
				"ehci_sleep");
		if (IS_ERR(set_state))
			pr_err("cannot get hsusb pinctrl sleep state\n");
		else
			pinctrl_select_state(mhcd->hsusb_pinctrl, set_state);
	}
devote_xo_handle:
	if (mhcd->xo_clk)
		clk_disable_unprepare(mhcd->xo_clk);
free_xo_handle:
	if (mhcd->xo_clk) {
		clk_put(mhcd->xo_clk);
		mhcd->xo_clk = NULL;
	}
	if (mhcd->async_irq)
		free_irq(mhcd->async_irq, mhcd);
unmap:
	iounmap(hcd->regs);
deinit_clocks:
	msm_ehci_init_clocks(mhcd, 0);
xo_put:
	if (mhcd->xo_clk)
		clk_put(mhcd->xo_clk);
put_hcd:
	usb_put_hcd(hcd);

	return ret;
}
static int msm_ehci_resume(struct msm_hcd *mhcd)
{
	struct usb_hcd *hcd = mhcd_to_hcd(mhcd);
	unsigned long timeout;
	unsigned temp;
	int ret;

	if (!atomic_read(&mhcd->in_lpm)) {
		dev_dbg(mhcd->dev, "%s called in !in_lpm\n", __func__);
		return 0;
	}

	wake_lock(&mhcd->wlock);

	/* Vote for TCXO when waking up the phy */
	ret = msm_xo_mode_vote(mhcd->xo_handle, MSM_XO_MODE_ON);
	if (ret)
		dev_err(mhcd->dev, "%s failed to vote for "
			"TCXO D0 buffer%d\n", __func__, ret);

	clk_prepare_enable(mhcd->core_clk);
	clk_prepare_enable(mhcd->iface_clk);

	msm_ehci_config_vddcx(mhcd, 1);

	temp = readl_relaxed(USB_USBCMD);
	temp &= ~ASYNC_INTR_CTRL;
	temp &= ~ULPI_STP_CTRL;
	writel_relaxed(temp, USB_USBCMD);

	if (!(readl_relaxed(USB_PORTSC) & PORTSC_PHCD))
		goto skip_phy_resume;

	temp = readl_relaxed(USB_PORTSC) & ~PORTSC_PHCD;
	writel_relaxed(temp, USB_PORTSC);

	timeout = jiffies + usecs_to_jiffies(PHY_RESUME_TIMEOUT_USEC);
	while ((readl_relaxed(USB_PORTSC) & PORTSC_PHCD) ||
			!(readl_relaxed(USB_ULPI_VIEWPORT) & ULPI_SYNC_STATE)) {
		if (time_after(jiffies, timeout)) {
			/*This is a fatal error. Reset the link and PHY*/
			dev_err(mhcd->dev, "Unable to resume USB. Resetting the h/w\n");
			msm_hsusb_reset(mhcd);
			break;
		}
		udelay(1);
	}

skip_phy_resume:

	atomic_set(&mhcd->in_lpm, 0);

	if (mhcd->async_int) {
		mhcd->async_int = false;
		pm_runtime_put_noidle(mhcd->dev);
		enable_irq(hcd->irq);
	}

	dev_info(mhcd->dev, "EHCI USB exited from low power mode\n");

	return 0;
}
示例#8
0
static int msm_ehci_resume(struct msm_hcd *mhcd)
{
	struct usb_hcd *hcd = mhcd_to_hcd(mhcd);
	unsigned long timeout;
	unsigned temp;
	int ret;
	unsigned long flags;

	if (!atomic_read(&mhcd->in_lpm)) {
		dev_dbg(mhcd->dev, "%s called in !in_lpm\n", __func__);
		return 0;
	}

	spin_lock_irqsave(&mhcd->wakeup_lock, flags);
	if (mhcd->wakeup_irq_enabled) {
		disable_irq_wake(mhcd->wakeup_irq);
		disable_irq_nosync(mhcd->wakeup_irq);
		mhcd->wakeup_irq_enabled = 0;
	}
	spin_unlock_irqrestore(&mhcd->wakeup_lock, flags);

	/* Handles race with Async interrupt */
	disable_irq(hcd->irq);

	if (mhcd->pmic_gpio_dp_irq_enabled) {
		disable_irq_wake(mhcd->pmic_gpio_dp_irq);
		disable_irq_nosync(mhcd->pmic_gpio_dp_irq);
		mhcd->pmic_gpio_dp_irq_enabled = 0;
	}
	spin_lock_irqsave(&mhcd->wakeup_lock, flags);
	if (mhcd->async_irq_enabled) {
		disable_irq_wake(mhcd->async_irq);
		disable_irq_nosync(mhcd->async_irq);
		mhcd->async_irq_enabled = 0;
	}
	spin_unlock_irqrestore(&mhcd->wakeup_lock, flags);

	wake_lock(&mhcd->wlock);

	/* Vote for TCXO when waking up the phy */
	if (!IS_ERR(mhcd->xo_clk)) {
		clk_prepare_enable(mhcd->xo_clk);
	} else {
		ret = msm_xo_mode_vote(mhcd->xo_handle, MSM_XO_MODE_ON);
		if (ret)
			dev_err(mhcd->dev, "%s failed to vote for TCXO D0 %d\n",
								__func__, ret);
	}

	clk_prepare_enable(mhcd->core_clk);
	clk_prepare_enable(mhcd->iface_clk);

	msm_ehci_config_vddcx(mhcd, 1);

	if (mhcd->flags & ALLOW_EHCI_RETENTION) {
		u32 phy_ctrl_val;
		
		phy_ctrl_val = readl_relaxed(USB_PHY_CTRL);
		phy_ctrl_val |= PHY_RETEN;
		writel_relaxed(phy_ctrl_val, USB_PHY_CTRL);
	}

	temp = readl_relaxed(USB_USBCMD);
	temp &= ~ASYNC_INTR_CTRL;
	temp &= ~ULPI_STP_CTRL;
	writel_relaxed(temp, USB_USBCMD);

	if (!(readl_relaxed(USB_PORTSC) & PORTSC_PHCD))
		goto skip_phy_resume;

	temp = readl_relaxed(USB_PORTSC) & ~(PORTSC_PHCD | PORT_RWC_BITS);
	writel_relaxed(temp, USB_PORTSC);

	timeout = jiffies + usecs_to_jiffies(PHY_RESUME_TIMEOUT_USEC);
	while ((readl_relaxed(USB_PORTSC) & PORTSC_PHCD) ||
			!(readl_relaxed(USB_ULPI_VIEWPORT) & ULPI_SYNC_STATE)) {
		if (time_after(jiffies, timeout)) {
			/*This is a fatal error. Reset the link and PHY*/
			dev_err(mhcd->dev, "Unable to resume USB. Resetting the h/w\n");
			msm_hsusb_reset(mhcd);
			break;
		}
		udelay(1);
	}

skip_phy_resume:

	usb_hcd_resume_root_hub(hcd);
	atomic_set(&mhcd->in_lpm, 0);

	if (mhcd->async_int) {
		mhcd->async_int = false;
		pm_runtime_put_noidle(mhcd->dev);
		enable_irq(hcd->irq);
	}

	if (atomic_read(&mhcd->pm_usage_cnt)) {
		atomic_set(&mhcd->pm_usage_cnt, 0);
		pm_runtime_put_noidle(mhcd->dev);
	}

	enable_irq(hcd->irq);
	dev_info(mhcd->dev, "EHCI USB exited from low power mode\n");

	return 0;
}
示例#9
0
static int __devinit ehci_msm2_probe(struct platform_device *pdev)
{
	struct usb_hcd *hcd;
	struct resource *res;
	struct msm_hcd *mhcd;
	const struct msm_usb_host_platform_data *pdata;
	char pdev_name[PDEV_NAME_LEN];
	int ret;
	int res_gpio;

	dev_info(&pdev->dev, "ehci_msm2 probe\n");

	/* If there is no WAN device present, we don't need to start the EHCI stack */
	if(!wan_present())
		return -ENODEV;

	if (pdev->dev.of_node) {
		dev_dbg(&pdev->dev, "device tree enabled\n");
		pdev->dev.platform_data = ehci_msm2_dt_to_pdata(pdev);
	}

	if (!pdev->dev.platform_data)
		dev_dbg(&pdev->dev, "No platform data given\n");

	if (!pdev->dev.dma_mask)
		pdev->dev.dma_mask = &ehci_msm_dma_mask;
	if (!pdev->dev.coherent_dma_mask)
		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);

	hcd = usb_create_hcd(&msm_hc2_driver, &pdev->dev,
				dev_name(&pdev->dev));
	if (!hcd) {
		dev_err(&pdev->dev, "Unable to create HCD\n");
		return  -ENOMEM;
	}

	hcd_to_bus(hcd)->skip_resume = true;

	hcd->irq = platform_get_irq(pdev, 0);
	if (hcd->irq < 0) {
		dev_err(&pdev->dev, "Unable to get IRQ resource\n");
		ret = hcd->irq;
		goto put_hcd;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res) {
		dev_err(&pdev->dev, "Unable to get memory resource\n");
		ret = -ENODEV;
		goto put_hcd;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);
	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
	if (!hcd->regs) {
		dev_err(&pdev->dev, "ioremap failed\n");
		ret = -ENOMEM;
		goto put_hcd;
	}

	mhcd = hcd_to_mhcd(hcd);
	mhcd->dev = &pdev->dev;

	spin_lock_init(&mhcd->wakeup_lock);

	mhcd->async_irq = platform_get_irq_byname(pdev, "async_irq");
	if (mhcd->async_irq < 0) {
		dev_dbg(&pdev->dev, "platform_get_irq for async_int failed\n");
		mhcd->async_irq = 0;
	} else {
		ret = request_irq(mhcd->async_irq, msm_async_irq,
				IRQF_TRIGGER_RISING, "msm_ehci_host", mhcd);
		if (ret) {
			dev_err(&pdev->dev, "request irq failed (ASYNC INT)\n");
			goto unmap;
		}
		disable_irq(mhcd->async_irq);
	}

	snprintf(pdev_name, PDEV_NAME_LEN, "%s.%d", pdev->name, pdev->id);
	mhcd->xo_clk = clk_get(&pdev->dev, "xo");
	if (!IS_ERR(mhcd->xo_clk)) {
		ret = clk_prepare_enable(mhcd->xo_clk);
	} else {
		mhcd->xo_handle = msm_xo_get(MSM_XO_TCXO_D0, pdev_name);
		if (IS_ERR(mhcd->xo_handle)) {
			dev_err(&pdev->dev, "%s fail to get handle for X0 D0\n",
								__func__);
			ret = PTR_ERR(mhcd->xo_handle);
			goto free_async_irq;
		} else {
			ret = msm_xo_mode_vote(mhcd->xo_handle, MSM_XO_MODE_ON);
		}
	}
	if (ret) {
		dev_err(&pdev->dev, "%s failed to vote for TCXO %d\n",
								__func__, ret);
		goto free_xo_handle;
	}

	if (pdev->dev.of_node) {
		res_gpio = of_get_named_gpio(pdev->dev.of_node, "usb2,resume-gpio", 0);
		if (res_gpio < 0){
			res_gpio = 0;
			goto devote_xo_handle; 
		}
		mhcd->resume_gpio = res_gpio;
		gpio_request(mhcd->resume_gpio, "USB2_RESUME");	

	} else {
		res = platform_get_resource_byname(pdev, IORESOURCE_IO, "resume_gpio");
		if (res) {
			dev_dbg(&pdev->dev, "resume_gpio:%d\n", res->start);
			mhcd->resume_gpio = res->start;
		}
	}
	if(pdev->dev.of_node){
		res_gpio = of_get_named_gpio(pdev->dev.of_node, "usb2,wakeup-gpio", 0);
		if (res_gpio < 0){
			res_gpio = 0;
			goto devote_xo_handle;
		}
		mhcd->wakeup_gpio = res_gpio;

	} else {
		res = platform_get_resource_byname(pdev, IORESOURCE_IO, "wakeup_gpio");
		if (res) {
			dev_dbg(&pdev->dev, "wakeup gpio:%d\n", res->start);
			mhcd->wakeup_gpio = res->start;
		}
	}
	if (pdev->dev.of_node)
		mhcd->wakeup_irq = gpio_to_irq(mhcd->wakeup_gpio);
	else
		mhcd->wakeup_irq = platform_get_irq_byname(pdev, "wakeup_irq");
	if (mhcd->wakeup_irq > 0) {
		dev_dbg(&pdev->dev, "wakeup irq:%d\n", res->start);

		irq_set_status_flags(mhcd->wakeup_irq, IRQ_NOAUTOEN);
		ret = request_irq(mhcd->wakeup_irq, msm_hsusb_wakeup_irq,
				IRQF_TRIGGER_HIGH,
				"msm_hsusb_wakeup", mhcd);
		if (ret) {
			dev_err(&pdev->dev, "request_irq(%d) failed:%d\n",
					mhcd->wakeup_irq, ret);
			mhcd->wakeup_irq = 0;
		}
	} else {
		mhcd->wakeup_irq = 0;
	}

	spin_lock_init(&mhcd->wakeup_lock);

	ret = msm_ehci_init_clocks(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "unable to initialize clocks\n");
		ret = -ENODEV;
		goto devote_xo_handle;
	}

	ret = msm_ehci_init_vddcx(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "unable to initialize VDDCX\n");
		ret = -ENODEV;
		goto deinit_clocks;
	}

	ret = msm_ehci_config_vddcx(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
		goto deinit_vddcx;
	}

	ret = msm_ehci_ldo_init(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
		goto deinit_vddcx;
	}

	ret = msm_ehci_ldo_enable(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "hsusb vreg enable failed\n");
		goto deinit_ldo;
	}

	ret = msm_ehci_init_vbus(mhcd, 1);
	if (ret) {
		dev_err(&pdev->dev, "unable to get vbus\n");
		goto disable_ldo;
	}

	pdata = mhcd->dev->platform_data;

	if (pdata && pdata->use_sec_phy)
		mhcd->usb_phy_ctrl_reg = USB_PHY_CTRL2;
	else
		mhcd->usb_phy_ctrl_reg = USB_PHY_CTRL;

	ret = msm_hsusb_reset(mhcd);
	if (ret) {
		dev_err(&pdev->dev, "hsusb PHY initialization failed\n");
		goto vbus_deinit;
	}

	if( pdata && pdata->phy_sof_workaround) {
		/* defer bus suspend until RH suspend */
		mhcd->ehci.susp_sof_bug = 1;
		mhcd->ehci.resume_sof_bug = 1;
	}

	ret = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
	if (ret) {
		dev_err(&pdev->dev, "unable to register HCD\n");
		goto vbus_deinit;
	}

	if (pdata && (!pdata->dock_connect_irq ||
				!irq_read_line(pdata->dock_connect_irq)))
		msm_ehci_vbus_power(mhcd, 1);

	device_init_wakeup(&pdev->dev, 1);
	wake_lock_init(&mhcd->wlock, WAKE_LOCK_SUSPEND, dev_name(&pdev->dev));
	wake_lock(&mhcd->wlock);
	INIT_WORK(&mhcd->phy_susp_fail_work, msm_ehci_phy_susp_fail_work);
	/*
	 * This pdev->dev is assigned parent of root-hub by USB core,
	 * hence, runtime framework automatically calls this driver's
	 * runtime APIs based on root-hub's state.
	 */
	/* configure pmic_gpio_irq for D+ change */
	if (pdata && pdata->pmic_gpio_dp_irq)
		mhcd->pmic_gpio_dp_irq = pdata->pmic_gpio_dp_irq;
	if (mhcd->pmic_gpio_dp_irq) {
		ret = request_threaded_irq(mhcd->pmic_gpio_dp_irq, NULL,
				msm_ehci_host_wakeup_irq,
				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
				"msm_ehci_host_wakeup", mhcd);
		if (!ret) {
			disable_irq_nosync(mhcd->pmic_gpio_dp_irq);
		} else {
			dev_err(&pdev->dev, "request_irq(%d) failed: %d\n",
					mhcd->pmic_gpio_dp_irq, ret);
			mhcd->pmic_gpio_dp_irq = 0;
		}
	}

	if (pdata && pdata->pd_rework_installed)
		mhcd->flags |= 	ALLOW_EHCI_RETENTION;

	pm_runtime_set_active(&pdev->dev);
	pm_runtime_enable(&pdev->dev);

	return 0;

vbus_deinit:
	msm_ehci_init_vbus(mhcd, 0);
disable_ldo:
	msm_ehci_ldo_enable(mhcd, 0);
deinit_ldo:
	msm_ehci_ldo_init(mhcd, 0);
deinit_vddcx:
	msm_ehci_init_vddcx(mhcd, 0);
deinit_clocks:
	msm_ehci_init_clocks(mhcd, 0);
devote_xo_handle:
	if (!IS_ERR(mhcd->xo_clk))
		clk_disable_unprepare(mhcd->xo_clk);
	else
		msm_xo_mode_vote(mhcd->xo_handle, MSM_XO_MODE_OFF);
	
	if(mhcd->wakeup_irq)
		free_irq(mhcd->wakeup_irq, mhcd);	
	if(mhcd->resume_gpio)
		gpio_free(mhcd->resume_gpio);	
free_xo_handle:
	if (!IS_ERR(mhcd->xo_clk))
		clk_put(mhcd->xo_clk);
	else
		msm_xo_put(mhcd->xo_handle);
free_async_irq:
	if (mhcd->async_irq)
		free_irq(mhcd->async_irq, mhcd);
unmap:
	iounmap(hcd->regs);
put_hcd:
	usb_put_hcd(hcd);

	return ret;
}