int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_FLASH_CFI_DRIVER
int portwidth;
MV_U32 devParam;
#endif
#if defined(MV_INCLUDE_TWSI)
MV_TWSI_ADDR slave;
#endif
MV_GPP_HAL_DATA gppHalData;
unsigned int i;
maskAllInt();
/* must initialize the int in order for udelay to work */
//alior interrupt_init();
timer_init();
/* Init the Board environment module (device bank params init) */
mvBoardEnvInit();
#if defined(MV_INCLUDE_TWSI)
slave.type = ADDR7_BIT;
slave.address = 0;
mvTwsiInit(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_TCLK, &slave, 0);
#endif
/* Init the Controlloer environment module (MPP init) */
mvCtrlEnvInit();
mvBoardDebugLed(3);
/* Init the Controller CPU interface */
mvCpuIfInit(mvCpuAddrWinMap);
/* Init the GPIO sub-system */
gppHalData.ctrlRev = mvCtrlRevGet();
mvGppInit(&gppHalData);
/* arch number of Integrator Board */
gd->bd->bi_arch_number = 529; //KW2 arch number
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
/* relocate the exception vectors */
/* U-Boot is running from DRAM at this stage */
for(i = 0; i < 0x100; i+=4)
{
*(unsigned int *)(0x0 + i) = *(unsigned int*)(TEXT_BASE + i);
}
mvBoardDebugLed(4);
return 0;
}
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
if (whoAmI() != 0)
return 0;
#if defined(MV_INCLUDE_TWSI)
MV_TWSI_ADDR slave;
#endif
unsigned int i;
maskAllInt();
/* Init the Board environment module (device bank params init) */
mvBoardEnvInit();
#if defined(MV_INCLUDE_TWSI)
slave.type = ADDR7_BIT;
slave.address = 0;
mvTwsiInit(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_TCLK, &slave, 0);
#endif
/* Init the Controlloer environment module (MPP init) */
mvCtrlEnvInit();
#if defined(CONFIG_DISPLAY_CPUINFO)
late_print_cpuinfo(); /* display cpu info (and speed) */
#endif
mvBoardDebugLed(2);
mvCpuIfInit(mvCpuAddrWinMap);
#ifdef MV_NOR_BOOT
env_init();
#endif
/* Init the GPIO sub-system */
MV_GPP_HAL_DATA gppHalData;
gppHalData.ctrlRev = mvCtrlRevGet();
mvGppInit(&gppHalData);
gd->bd->bi_arch_number = 528;
gd->bd->bi_boot_params = 0x00000100;
/* relocate the exception vectors */
/* U-Boot is running from DRAM at this stage */
for (i = 0; i < 0x100; i += 4)
*(unsigned int*)(0x0 + i) =
*(unsigned int*)(CONFIG_SYS_TEXT_BASE + i);
mvBoardDebugLed(4);
return 0;
}
static void __init mv_init(void)
{
/* init the Board environment */
mvBoardEnvInit();
/* init the controller environment */
if (mvCtrlEnvInit() ) {
printk( "Controller env initialization failed.\n" );
return;
}
/* Init the CPU windows setting and the access protection windows. */
if (mvCpuIfInit(mv_sys_map())) {
printk( "Cpu Interface initialization failed.\n" );
return;
}
#if defined (CONFIG_MV78XX0_Z0)
mvCpuIfBridgeReorderWAInit();
#endif
/* Init Tclk & SysClk */
mvTclk = mvBoardTclkGet();
mvSysclk = mvBoardSysClkGet();
support_wait_for_interrupt = 1;
#ifdef CONFIG_JTAG_DEBUG
support_wait_for_interrupt = 0; /* for Lauterbach */
#endif
mv_vfp_init();
elf_hwcap &= ~HWCAP_JAVA;
serial_initialize();
/* At this point, the CPU windows are configured according to default definitions in mvSysHwConfig.h */
/* and cpuAddrWinMap table in mvCpuIf.c. Now it's time to change defaults for each platform. */
mvCpuIfAddrDecShow(whoAmI());
print_board_info();
}
/*****************************************************************************
* UART
****************************************************************************/
static struct resource mv_uart_resources[] = {
{
.start = PORT0_BASE,
.end = PORT0_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0,
.end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
{
.start = PORT1_BASE,
.end = PORT1_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1,
.end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
};
static struct plat_serial8250_port mv_uart_data[] = {
{
.mapbase = PORT0_BASE,
.membase = (char *)PORT0_BASE,
.irq = IRQ_UART0,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = PORT1_BASE,
.membase = (char *)PORT1_BASE,
.irq = IRQ_UART1,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
},
{ },
};
static struct platform_device mv_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = mv_uart_data,
},
.num_resources = ARRAY_SIZE(mv_uart_resources),
.resource = mv_uart_resources,
};
static void serial_initialize(void)
{
mv_uart_data[0].uartclk = mv_uart_data[1].uartclk = mvTclk;
platform_device_register(&mv_uart);
}
static void __init mv_vfp_init(void)
{
#if defined CONFIG_VFP_FASTVFP
printk("VFP initialized to Run Fast Mode.\n");
#endif
}
#if defined(MV_88F6183)
#ifdef CONFIG_MV_INCLUDE_AUDIO
typedef struct {
unsigned int base;
unsigned int size;
} _audio_mem_info;
typedef struct {
u32 spdif_rec;
u32 spdif_play;
u32 i2s_rec;
u32 i2s_play;
_audio_mem_info mem_array[MV_DRAM_MAX_CS + 1];
} _audio_info;
_audio_info audio_info = {1, 1, 1, 1};
static struct resource mv_snd_resources[] = {
[0] = {
.start = INTER_REGS_BASE + AUDIO_REG_BASE,
.end = INTER_REGS_BASE + AUDIO_REG_BASE + SZ_16K -1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_AUDIO_INT,
.end = IRQ_AUDIO_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = NR_IRQS, /* should obtained from board information*/
.end = NR_IRQS, /* should obtained from board information */
.flags = IORESOURCE_IRQ,
}
};
static u64 mv_snd_dmamask = 0xFFFFFFFFUL;
static struct platform_device mv_snd_device = {
.name = "mv88fx_snd",
.id = -1,
.dev = {
.dma_mask = &mv_snd_dmamask,
.coherent_dma_mask = 0xFFFFFFFF,
.platform_data = &audio_info,
},
.num_resources = ARRAY_SIZE(mv_snd_resources),
.resource = mv_snd_resources,
};
#endif /* #ifdef CONFIG_MV_INCLUDE_AUDIO */
#ifdef CONFIG_MV_INCLUDE_SDIO
static struct resource mvsdmmc_resources[] = {
[0] = {
.start = INTER_REGS_BASE + 0x80000,
.end = INTER_REGS_BASE + 0x80000 + SZ_1K -1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = SDIO_IRQ_NUM,
.end = SDIO_IRQ_NUM,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = NR_IRQS, /* should obtained from board information*/
.end = NR_IRQS, /* should obtained from board information */
.flags = IORESOURCE_IRQ,
}
};
static u64 mvsdmmc_dmamask = 0xffffffffUL;
static struct platform_device mvsdmmc_device = {
.name = "mvsdmmc",
.id = -1,
.dev = {
.dma_mask = &mvsdmmc_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(mvsdmmc_resources),
.resource = mvsdmmc_resources,
};
#endif /* CONFIG_MV_INCLUDE_SDIO */
static struct platform_device *devices[] __initdata = {
#ifdef CONFIG_MV_INCLUDE_AUDIO
&mv_snd_device,
#endif
#ifdef CONFIG_MV_INCLUDE_SDIO
&mvsdmmc_device,
#endif
NULL
};
#endif /* #if defined(MV_88F6183) */
static void __init mv_init(void)
{
unsigned int temp;
/* init the Board environment */
if (mvBoardIdGet() != RD_88F6082_MICRO_DAS_NAS) /* excluded for HDD power problem - to be fixed */
mvBoardEnvInit();
/* init the controller environment */
if( mvCtrlEnvInit() ) {
printk( "Controller env initialization failed.\n" );
return;
}
if(mvBoardIdGet() == RD_88F5181_POS_NAS) {
temp = MV_REG_READ(GPP_DATA_OUT_REG(0));
temp &= ~(1 << 0x5);
/* for host mode should be set to 0 */
if(!mvIsUsbHost) {
temp |= (1 << 0x5);
}
MV_REG_WRITE(GPP_DATA_OUT_REG(0), temp);
}
/* Init the CPU windows setting and the access protection windows. */
if( mvCpuIfInit(mv_sys_map()) ) {
printk( "Cpu Interface initialization failed.\n" );
return;
}
/* Init Tclk & SysClk */
mvTclk = mvBoardTclkGet();
mvSysclk = mvBoardSysClkGet();
printk("Sys Clk = %d, Tclk = %d\n",mvSysclk ,mvTclk );
if ((mvCtrlModelGet() == MV_5281_DEV_ID) || (mvCtrlModelGet() == MV_1281_DEV_ID)
|| (mvCtrlModelGet() == MV_6183_DEV_ID))
mv_orion_ver = MV_ORION2; /* Orion II */
else
mv_orion_ver = MV_ORION1; /* Orion I */
/* Implement workaround for FEr# CPU-C16: Wait for interrupt command */
/* is not processed properly, the workaround is not to use this command */
/* the erratum is relevant for 5281 devices with revision less than C0 */
if((mvCtrlModelGet() == MV_5281_DEV_ID)
&& (mvCtrlRevGet() < MV_5281_C0_REV))
{
support_wait_for_interrupt = 0;
}
#ifdef CONFIG_JTAG_DEBUG
support_wait_for_interrupt = 0; /* for Lauterbach */
#endif
mv_vfp_init();
elf_hwcap &= ~HWCAP_JAVA;
serial_initialize();
/* At this point, the CPU windows are configured according to default definitions in mvSysHwConfig.h */
/* and cpuAddrWinMap table in mvCpuIf.c. Now it's time to change defaults for each platform. */
mvCpuIfAddDecShow();
#if defined(CONFIG_MTD_PHYSMAP)
mv_mtd_initialize();
#endif
print_board_info();
#ifdef CONFIG_MV_INCLUDE_IDMA
mvDmaInit();
#endif
#if defined(MV_88F6183)
#ifdef CONFIG_MV_INCLUDE_SDIO
mvsdmmc_resources[2].end = mvBoardSDIOGpioPinGet() + IRQ_GPP_START;
mvsdmmc_resources[2].start = mvBoardSDIOGpioPinGet() + IRQ_GPP_START;
irq_int_type[mvBoardSDIOGpioPinGet()] = GPP_IRQ_TYPE_CHANGE_LEVEL;
#endif /* CONFIG_MV_INCLUDE_SDIO */
#ifdef CONFIG_MV_INCLUDE_AUDIO
for (temp=0 ; temp< MV_DRAM_MAX_CS; temp++) {
MV_DRAM_DEC_WIN win;
audio_info.mem_array[temp].base = 0;
audio_info.mem_array[temp].size = 0;
mvDramIfWinGet(SDRAM_CS0 + temp, &win);
if (win.enable) {
audio_info.mem_array[temp].base = win.addrWin.baseLow;
audio_info.mem_array[temp].size = win.addrWin.size;
}
}
#endif /* CONFIG_MV_INCLUDE_AUDIO */
if ((temp = ARRAY_SIZE(devices) - 1))
platform_add_devices(devices, temp);
#endif /* MV_88F6183 */
return;
}
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
int clock_divisor;
unsigned int i;
MV_GPP_HAL_DATA gppHalData;
clock_divisor = (CONFIG_SYS_TCLK / 16)/115200;
/* muti-core support, initiate each Uart to each cpu */
mvUartInit(whoAmI(), clock_divisor, mvUartBase(whoAmI()));
if (whoAmI() != 0)
return 0;
#if defined(MV_INCLUDE_TWSI)
MV_TWSI_ADDR slave;
#endif
maskAllInt();
/* must initialize the int in order for udelay to work */
/* interrupt_init(); - no interrupt handling in u-boot */
timer_init();
/* Init the Board environment module (device bank params init) */
mvBoardEnvInit();
#if defined(MV_INCLUDE_TWSI)
slave.type = ADDR7_BIT;
slave.address = 0;
mvTwsiInit(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_TCLK, &slave, 0);
#endif
/* Init the Controlloer environment module (MPP init) */
mvCtrlEnvInit();
#if defined(CONFIG_DISPLAY_CPUINFO)
late_print_cpuinfo(); /* display cpu info (and speed) */
#endif
mvBoardDebugLed(2);
/* Init the Controller CPU interface */
mvCpuIfInit(mvCpuAddrWinMap);
#if defined(MV_NOR_BOOT)
env_init();
#endif
if (mvBoardCpssBoardIdSet(mvBoardIdGet()) != MV_OK)
printf("%s: Error: Failed to set Board ID for CPSS!\n", __func__);
/* Init the GPIO sub-system */
gppHalData.ctrlRev = mvCtrlRevGet();
mvGppInit(&gppHalData);
/* arch number of Integrator Board */
gd->bd->bi_arch_number=mv_get_arch_number();
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
/* relocate the exception vectors */
/* U-Boot is running from DRAM at this stage */
for(i = 0; i < 0x100; i+=4) {
*(unsigned int *)(0x0 + i) = *(unsigned int*)(CONFIG_SYS_TEXT_BASE + i);
}
mvBoardDebugLed(4);
return 0;
}