MV_STATUS mvPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType, MV_PEX_HAL_DATA *halData)
{
MV_PEX_MODE pexMode;
MV_U32 regVal;
MV_U32 status;
mvOsMemcpy(&pexHalData[pexIf], halData, sizeof(MV_PEX_HAL_DATA));
if (mvPexModeGet(pexIf, &pexMode) != MV_OK) {
mvOsPrintf("PEX init ERR. mvPexModeGet failed (pexType=%d)\n", pexMode.pexType);
return MV_ERROR;
}
if (pexMode.pexLinkUp == MV_FALSE) {
/* interface detected no Link. */
return MV_NO_SUCH;
}
/* Check that required PEX type is the one set in reset time */
if (pexType != pexMode.pexType) {
/* No Link. Shut down the Phy */
mvPexPhyPowerDown(pexIf);
mvOsPrintf("PEX init ERR. PEX type sampled mismatch (%d,%d)\n", pexType, pexMode.pexType);
return MV_ERROR;
}
if (MV_PEX_ROOT_COMPLEX == pexType) {
mvPexLocalBusNumSet(pexIf, PEX_HOST_BUS_NUM(pexIf));
mvPexLocalDevNumSet(pexIf, PEX_HOST_DEV_NUM(pexIf));
/* Local device master Enable */
mvPexMasterEnable(pexIf, MV_TRUE);
/* Local device slave Enable */
mvPexSlaveEnable(pexIf, mvPexLocalBusNumGet(pexIf), mvPexLocalDevNumGet(pexIf), MV_TRUE);
/* Interrupt disable */
status = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND));
status |= PXSAC_INT_DIS;
MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND), status);
} else {
regVal = MV_REG_READ(PEX_DBG_CTRL_REG(pexIf));
regVal &= ~(BIT16 | BIT19);
MV_REG_WRITE(PEX_DBG_CTRL_REG(pexIf), regVal);
}
return MV_OK;
}
MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType)
{
MV_PEX_MODE pexMode;
MV_U32 regVal;
MV_U32 status;
/* First implement Guideline (GL# PCI Express-2) Wrong Default Value */
/* to Transmitter Output Current (TXAMP) Relevant for: 88F5181-A1/B0/B1 */
/* and 88F5281-B0 and above, 88F5182, 88F5082, 88F5181L, 88F6082/L */
if ((mvCtrlModelGet() != MV_1281_DEV_ID) &&
(mvCtrlModelGet() != MV_6281_DEV_ID) &&
(mvCtrlModelGet() != MV_6192_DEV_ID) &&
(mvCtrlModelGet() != MV_6190_DEV_ID) &&
(mvCtrlModelGet() != MV_6180_DEV_ID) &&
(mvCtrlModelGet() != MV_6183_DEV_ID) &&
(mvCtrlModelGet() != MV_6183L_DEV_ID) &&
(mvCtrlModelGet() != MV_78100_DEV_ID) &&
(mvCtrlModelGet() != MV_78200_DEV_ID) &&
(mvCtrlModelGet() != MV_76100_DEV_ID) &&
(mvCtrlModelGet() != MV_78XX0_DEV_ID))
{
/* Read current value of TXAMP */
MV_REG_WRITE(0x41b00, 0x80820000); /* Write the read command */
regVal = MV_REG_READ(0x41b00); /* Extract the data */
/* Prepare new data for write */
regVal &= ~0x7; /* Clear bits [2:0] */
regVal |= 0x4; /* Set the new value */
regVal &= ~0x80000000; /* Set "write" command */
MV_REG_WRITE(0x41b00, regVal); /* Write the write command */
}
else
{
/* Implement 1.0V termination GL for 88F1281 device only */
/* BIT0 - Common mode feedback */
/* BIT3 - TxBuf, extra drive for 1.0V termination */
if (mvCtrlModelGet() == MV_1281_DEV_ID)
{
MV_REG_WRITE(0x41b00, 0x80860000); /* Write the read command */
regVal = MV_REG_READ(0x41b00); /* Extract the data */
regVal |= (BIT0 | BIT3);
regVal &= ~0x80000000; /* Set "write" command */
MV_REG_WRITE(0x41b00, regVal); /* Write the write command */
MV_REG_WRITE(0x31b00, 0x80860000); /* Write the read command */
regVal = MV_REG_READ(0x31b00); /* Extract the data */
regVal |= (BIT0 | BIT3);
regVal &= ~0x80000000; /* Set "write" command */
MV_REG_WRITE(0x31b00, regVal); /* Write the write command */
}
}
if( mvPexModeGet(pexIf, &pexMode) != MV_OK)
{
mvOsPrintf("PEX init ERR. mvPexModeGet failed (pexType=%d)\n",pexMode.pexType);
return MV_ERROR;
}
/* Check that required PEX type is the one set in reset time */
if (pexType != pexMode.pexType)
{
/* No Link. Shut down the Phy */
mvPexPowerDown(pexIf);
mvOsPrintf("PEX init ERR. PEX type sampled mismatch (%d,%d)\n",pexType,pexMode.pexType);
return MV_ERROR;
}
if (MV_PEX_ROOT_COMPLEX == pexType)
{
mvPexLocalBusNumSet(pexIf, PEX_HOST_BUS_NUM(pexIf));
mvPexLocalDevNumSet(pexIf, PEX_HOST_DEV_NUM(pexIf));
/* Local device master Enable */
mvPexMasterEnable(pexIf, MV_TRUE);
/* Local device slave Enable */
mvPexSlaveEnable(pexIf, mvPexLocalBusNumGet(pexIf),
mvPexLocalDevNumGet(pexIf), MV_TRUE);
/* Interrupt disable */
status = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND));
status |= PXSAC_INT_DIS;
MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND), status);
}
/* now wait 500 ms to be sure the link is valid (spec compliant) */
mvOsDelay(500);
/* Check if we have link */
if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN)
{
mvOsPrintf("PEX%d interface detected no Link.\n",pexIf);
return MV_NO_SUCH;
}
if (MV_PEX_WITDH_X1 == pexMode.pexWidth)
{
mvOsPrintf("PEX%d interface detected Link X1\n",pexIf);
}
else
{
mvOsPrintf("PEX%d interface detected Link X4\n",pexIf);
}
#ifdef PCIE_VIRTUAL_BRIDGE_SUPPORT
mvPexVrtBrgInit(pexIf);
#endif
return MV_OK;
}
MV_STATUS mvPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType, MV_PEX_HAL_DATA *halData)
{
MV_PEX_MODE pexMode;
MV_U32 regVal;
MV_U32 status;
MV_U16 ctrlModel, phyRegVal;
mvOsMemcpy(&pexHalData[pexIf], halData, sizeof(MV_PEX_HAL_DATA));
/* First implement Guideline (GL# PCI Express-2) Wrong Default Value */
/* to Transmitter Output Current (TXAMP) Relevant for: 88F5181-A1/B0/B1 */
/* and 88F5281-B0 and above, 88F5182, 88F5082, 88F5181L, 88F6082/L */
ctrlModel = pexHalData[pexIf].ctrlModel;
if ((ctrlModel != MV_1281_DEV_ID) &&
(ctrlModel != MV_6281_DEV_ID) &&
(ctrlModel != MV_6282_DEV_ID) &&
(ctrlModel != MV_6280_DEV_ID) &&
(ctrlModel != MV_6192_DEV_ID) &&
(ctrlModel != MV_6190_DEV_ID) &&
(ctrlModel != MV_6180_DEV_ID) &&
(ctrlModel != MV_6183_DEV_ID) &&
(ctrlModel != MV_6183L_DEV_ID) &&
(ctrlModel != MV_78100_DEV_ID) &&
(ctrlModel != MV_78200_DEV_ID) &&
(ctrlModel != MV_76100_DEV_ID) &&
(ctrlModel != MV_6323_DEV_ID) &&
(ctrlModel != MV_6322_DEV_ID) &&
(ctrlModel != MV_6321_DEV_ID) &&
(ctrlModel != MV_78XX0_DEV_ID) &&
(ctrlModel != MV_6510_DEV_ID) &&
(ctrlModel != MV_6530_DEV_ID) &&
(ctrlModel != MV_6550_DEV_ID) &&
(ctrlModel != MV_6560_DEV_ID) &&
(ctrlModel != MV_6710_DEV_ID) &&
(ctrlModel != MV_78130_DEV_ID) &&
(ctrlModel != MV_78160_DEV_ID) &&
(ctrlModel != MV_78230_DEV_ID) &&
(ctrlModel != MV_78260_DEV_ID) &&
(ctrlModel != MV_78460_DEV_ID) &&
(ctrlModel != MV_78000_DEV_ID)) {
/* Read current value of TXAMP */
MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), 0x80820000); /* Write the read command */
regVal = MV_REG_READ(PEX_PHY_ACCESS_REG(pexIf)); /* Extract the data */
/* Prepare new data for write */
regVal &= ~0x7; /* Clear bits [2:0] */
regVal |= 0x4; /* Set the new value */
regVal &= ~0x80000000; /* Set "write" command */
MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regVal); /* Write the write command */
} else {
/* Implement 1.0V termination GL for 88F1281 device only */
/* BIT0 - Common mode feedback */
/* BIT3 - TxBuf, extra drive for 1.0V termination */
if (ctrlModel == MV_1281_DEV_ID) {
MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), 0x80860000); /* Write the read command */
regVal = MV_REG_READ(0x41b00); /* Extract the data */
regVal |= (BIT0 | BIT3);
regVal &= ~0x80000000; /* Set "write" command */
MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regVal); /* Write the write command */
MV_REG_WRITE(0x31b00, 0x80860000); /* Write the read command */
regVal = MV_REG_READ(0x31b00); /* Extract the data */
regVal |= (BIT0 | BIT3);
regVal &= ~0x80000000; /* Set "write" command */
MV_REG_WRITE(0x31b00, regVal); /* Write the write command */
}
}
if ((ctrlModel == MV_6281_DEV_ID) ||
(ctrlModel == MV_6282_DEV_ID) ||
(ctrlModel == MV_6280_DEV_ID) ||
(ctrlModel == MV_6192_DEV_ID) ||
(ctrlModel == MV_6190_DEV_ID) ||
(ctrlModel == MV_6180_DEV_ID)) {
regVal = MV_REG_READ(0x100e4); /* This register currently doesn't appear in the FS */
regVal |= 0x3 << 25;
MV_REG_WRITE(0x100e4, regVal);
}
if (ctrlModel == MV_6282_DEV_ID) {
mvPexPhyRegRead(pexIf, 0x92, &phyRegVal);
phyRegVal &= ~(0x80F0);
phyRegVal |= 0x8080;
mvPexPhyRegWrite(pexIf, 0x92, phyRegVal);
} else if ((ctrlModel == MV_6510_DEV_ID) ||
(ctrlModel == MV_6530_DEV_ID) || (ctrlModel == MV_6550_DEV_ID) || (ctrlModel == MV_6560_DEV_ID)) {
regVal = MV_REG_READ(0x100e4); /* This register currently doesn't appear in the FS */
regVal |= 0x3 << 25;
MV_REG_WRITE(0x100e4, regVal);
mvPexPhyRegRead(pexIf, 0x92, &phyRegVal);
phyRegVal &= ~(0x80F0);
phyRegVal |= 0x8080;
mvPexPhyRegWrite(pexIf, 0x92, phyRegVal);
}
if (mvPexModeGet(pexIf, &pexMode) != MV_OK) {
mvOsPrintf("PEX init ERR. mvPexModeGet failed (pexType=%d)\n", pexMode.pexType);
return MV_ERROR;
}
/* Check that required PEX type is the one set in reset time */
if (pexType != pexMode.pexType) {
/* No Link. Shut down the Phy */
mvPexPhyPowerDown(pexIf);
mvOsPrintf("PEX init ERR. PEX type sampled mismatch (%d,%d)\n", pexType, pexMode.pexType);
return MV_ERROR;
}
if (MV_PEX_ROOT_COMPLEX == pexType) {
mvPexLocalBusNumSet(pexIf, PEX_HOST_BUS_NUM(pexIf));
mvPexLocalDevNumSet(pexIf, PEX_HOST_DEV_NUM(pexIf));
/* Local device master Enable */
mvPexMasterEnable(pexIf, MV_TRUE);
/* Local device slave Enable */
mvPexSlaveEnable(pexIf, mvPexLocalBusNumGet(pexIf), mvPexLocalDevNumGet(pexIf), MV_TRUE);
/* Interrupt disable */
status = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND));
status |= PXSAC_INT_DIS;
MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND), status);
if (ctrlModel == MV_6710_DEV_ID) {
/* PEX capability */
regVal = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CAPABILITY_REG)) & 0xF;
if (regVal == 0x2) {
/* KW40 set to Gen 2.0 - conf_auto_speed_change */
/* when bit is set, link will issue link speed change to the max link speed possible */
regVal = MV_REG_READ(PEX_CTRL_REG(pexIf)) | (1<<10);
MV_REG_WRITE(PEX_CTRL_REG(pexIf), regVal);
}
}
} else {
/* TODO: 14/12/10 - requested by CV to support EP Compliance */
MV_REG_WRITE(PEX_DBG_CTRL_REG(pexIf), 0x0F62F0C0);
MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), (0x80C2 << 16));
regVal = MV_REG_READ(PEX_PHY_ACCESS_REG(pexIf)) & 0xFFFF;
MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), (0xC2 << 16) | regVal | (1 << 2));
MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), (0x8080 << 16));
regVal = MV_REG_READ(PEX_PHY_ACCESS_REG(pexIf)) & 0xFFFF;
MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), (0x80 << 16) | regVal | (0x2 << 1));
}
mvSysPexCpuIfEnable(pexIf);
/* now wait 1ms to be sure the link is valid */
mvOsDelay(100);
/* Check if we have link */
if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN) {
/*mvOsPrintf("PEX%d interface detected no Link.\n", pexIf);*/
return MV_NO_SUCH;
}
#if 0
if (MV_PEX_WITDH_X1 == pexMode.pexWidth)
mvOsPrintf("PEX%d interface detected Link X1\n", pexIf);
else
mvOsPrintf("PEX%d interface detected Link X4\n", pexIf);
#endif
#ifdef PCIE_VIRTUAL_BRIDGE_SUPPORT
mvPexVrtBrgInit(pexIf);
#endif
return MV_OK;
}
