void
TestMultifunctionNode() {
typedef tbb::flow::multifunction_node<int, tbb::flow::tuple<int, int>, P> multinode_type;
REMARK("Testing multifunction_node");
test_reversal<P,multinode_type> my_test;
REMARK(":");
tbb::flow::graph g;
multinode_type mf(g, tbb::flow::serial, mf_body<multinode_type>(serial_fn_state0));
tbb::flow::queue_node<int> qin(g);
tbb::flow::queue_node<int> qodd_out(g);
tbb::flow::queue_node<int> qeven_out(g);
tbb::flow::make_edge(qin,mf);
tbb::flow::make_edge(tbb::flow::output_port<0>(mf), qeven_out);
tbb::flow::make_edge(tbb::flow::output_port<1>(mf), qodd_out);
g.wait_for_all();
for( int ii = 0; ii <
#if TBB_PREVIEW_FLOW_GRAPH_FEATURES
2
#else
1
#endif
; ++ii) {
serial_fn_state0 = 0;
if(ii == 0) REMARK(" reset preds"); else REMARK(" 2nd");
qin.try_put(0);
// wait for node to be active
BACKOFF_WAIT(serial_fn_state0 == 0, "timed out waiting for first put");
qin.try_put(1);
BACKOFF_WAIT((!my_test(mf)), "Timed out waiting");
ASSERT(my_test(mf), "fail second put test");
g.my_root_task->cancel_group_execution();
// release node
serial_fn_state0 = 2;
g.wait_for_all();
ASSERT(my_test(mf), "fail cancel group test");
#if TBB_PREVIEW_FLOW_GRAPH_FEATURES
if( ii == 1) {
REMARK(" rf_extract");
g.reset(tbb::flow::rf_extract);
ASSERT(tbb::flow::output_port<0>(mf).my_successors.empty(), "output_port<0> not reset (rf_extract)");
ASSERT(tbb::flow::output_port<1>(mf).my_successors.empty(), "output_port<1> not reset (rf_extract)");
}
else
#endif
{
g.reset();
}
ASSERT(mf.my_predecessors.empty(), "edge didn't reset");
ASSERT((ii == 0 && !qin.my_successors.empty()) || (ii == 1 && qin.my_successors.empty()), "edge didn't reset");
}
REMARK(" done\n");
}
int main() {
my_test();
return 0;
}
int main(int argc, char **argv)
{
ros::init(argc, argv, "cds_control_node");
ros::NodeHandle nh("~");
CdsCartesianTestNode my_test(nh);
my_test.run();
return 0;
}
TEST_P(classifier_test, save_load) {
jubatus::util::math::random::mtrand rand(0);
const size_t example_size = 1000;
vector<pair<string, datum> > data;
make_random_data(rand, data, example_size);
for (size_t i = 0; i < example_size; i++) {
classifier_->train(data[i]);
}
std::string save_data;
save_model(classifier_->get_mixable_holder(), save_data);
classifier_->clear();
load_model(classifier_->get_mixable_holder(), save_data);
my_test();
}
int main(void)
{
int i,j;
gr_clearkey();
printf("Press any key to start...");
while(gr_khit()==0);
gr_setmode(MODE_LORES_TEXT_PAGE_1);
gr_fill(PAGE_1, BLACK);
while(gr_khit()==0);
my_test();
j=0;
for(i=0;i<48;i++) {
gr_hlin(39,0,i,j,PAGE_1);
j++;
if (j==16) j=0;
}
j=0;
for(i=0;i<40;i++) {
gr_vlin(47,0,i,j,PAGE_1);
j++;
if (j==16) j=0;
}
gr_clearkey();
while(gr_khit()==0);
for (i=33;i>0;i--) {
gr_sprite(i, 10, 6, 6, PAGE_1, sprite);
}
gr_clearkey();
while(gr_khit()==0);
for (i=0;i<16;i++) {
gr_fill(0, i);
}
return 0;
}
int main(void){
my_test();
int errcheck = 0;
int *ERR = &errcheck;
section_t *fourteen = section_new(ERR);
if(error_output(ERR))
return 0;
section_auditory_add(fourteen, 67, 25, ERR);
if(error_output(ERR))
return 0;
int plc = section_total_places(fourteen, ERR);
if(error_output(ERR))
return 0;
printf("\nPlaces: %d", plc);
auditory_occupy(fourteen, 67, "Hadyniak", ERR);
if(error_output(ERR))
return 0;
char *name = auditory_isoccupied(fourteen, 67, ERR);
if(error_output(ERR))
return 0;
printf("Auditory 67-14 is occupied by %s", name);
return 0;
}
int kmain(unsigned int magic,multibootInfo *mb)
{
construct(); //construct the global objects
char ans;
cout<<"Nano OS is booting\n";
String::strcpy(boot_dev,(const char *)mb->bootDevice);
memend=mb->memoryUpper*1024+0x100000; //memory end upper memory in bytes +1MB
// well now show the world we have managed our Memory ;)
multiboot *m_boot;
m_boot=multiboot::Instance();
m_boot->set_multiboot_info(mb);
m_boot->set_multiboot_hdr();
cout<<"===============================\n";
cout<<"Available Memory : "<<(unsigned int)m_boot->get_mem_avail()/1024<<"\n";
cout<<" Used Memory : "<<(unsigned int)m_boot->get_mem_used()/1024<<"\n";
cout<<"===============================\n";
cout.flags(hex|showbase);
cout<<"Kernel start "<<(unsigned int)m_boot->get_k_start()<<" Kernel end "<<(unsigned int)m_boot->get_k_end() \
<<" kernel length ="<<(unsigned int)m_boot->get_k_length()<<"\n";
cout.flags(dec);
kend = m_boot->get_k_end();
// Before we do any thing we should initialize our Heap based memory allocator( Thanks to Chris Giese )
init_heap();
// Setup our Descriptor tables GDT and IDT
cout<<"Setting up GDT ";
GDT::setup();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
cout<<"setting up IDT ";
IDT::setup();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
// After our IDT is loaded We should install our interrupt
cout<<"setting up IRQ subsystem ";
IRQ::setup();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
// Now, as our IRQ subsystem is set we should install keyboard sothat, our system will be interractive.
cout<<"installing key board \n";
kbd::setup();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
// The operating system and the digital computers are worthless if there is no timer
// so install and initialize the timer
cout<<"installing timer interrupt ";
TIMER *my_timer = TIMER::Instance();
my_timer->setup();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
cout<<"my_timer at "<<(unsigned int)my_timer<<"\n";
cout<<"Mboot at "<<(unsigned int)m_boot<<"\n";
// So all the basic systems are in place now
// We should initialize the PCI subsystem
cout<<"Scanning PCI...\n";
pci_bus *sys_pci_bus=pci_bus::Instance();
sys_pci_bus->scan();
sys_pci_bus->list_dev();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
// now we can start our interrupt system
cout<<"\n\n"<<"Enabling Interrupts ";
enable();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
// now check if we have any PCI IDE
cout<<"Initilizing storage susbsystem(PCI-IDE) ";
init_disks();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
cout<<"Initializing Net device...";
detect_netdev();
cout.SetColour(RED,BLACK,0);
cout<<"done\n";
cout.SetColour(WHITE,BLACK,0);
//cout<<"\nDone\n";
//here let us try our Network ethernet device setup
//sys_nic0->send_arp_request();
//cout<<"net init complete\n";
//cout<<"sending\n";
//for(int i=0;i<10;i++)
// test_req_arp();
// show which IRQs are installed not necessary but it comes handy while debugging the ISRs.
//cout<<"\n"<<"Dumping IRQ routines \n";
//IRQ::dump_irq_routines();
// Our tasks are thread implemented in kernel and it depends on timer interrupt
// so now we can start the tasking subsystem
//cout<<"Initializing tasking ";
//init_tasks();
// bellow this we should not see anything.. why? because in the tasks we started 2 threads
// one idle thread and other is our Shell
//cout<<"done\n";
init_syscall();
my_test();
for(;;);
cout<<"\nReached End of kernel\n shoud not happen \n\nGOODBYE\n";
disable();
halt();
return 0;
}
TEST_P(classifier_test, my_test) {
my_test();
}
