static int
ohci_pci_probe(device_t self)
{
const char *desc = ohci_pci_match(self);
if (desc) {
device_set_desc(self, desc);
return 0;
} else {
return ENXIO;
}
}
static int
ohci_pci_attach(device_t self)
{
ohci_softc_t *sc = device_get_softc(self);
int err;
int rid;
/* XXX where does it say so in the spec? */
sc->sc_bus.usbrev = USBREV_1_0;
pci_enable_busmaster(self);
/*
* Some Sun PCIO-2 USB controllers have their intpin register
* bogusly set to 0, although it should be 4. Correct that.
*/
if (pci_get_devid(self) == PCI_OHCI_DEVICEID_PCIO2USB &&
pci_get_intpin(self) == 0)
pci_set_intpin(self, 4);
rid = PCI_CBMEM;
sc->io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->io_res) {
device_printf(self, "Could not map memory\n");
return ENXIO;
}
sc->iot = rman_get_bustag(sc->io_res);
sc->ioh = rman_get_bushandle(sc->io_res);
rid = 0;
sc->irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->irq_res == NULL) {
device_printf(self, "Could not allocate irq\n");
ohci_pci_detach(self);
return ENXIO;
}
sc->sc_bus.bdev = device_add_child(self, "usb", -1);
if (!sc->sc_bus.bdev) {
device_printf(self, "Could not add USB device\n");
ohci_pci_detach(self);
return ENOMEM;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
/* ohci_pci_match will never return NULL if ohci_pci_probe succeeded */
device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self));
switch (pci_get_vendor(self)) {
case PCI_OHCI_VENDORID_ACERLABS:
ksprintf(sc->sc_vendor, "AcerLabs");
break;
case PCI_OHCI_VENDORID_AMD:
ksprintf(sc->sc_vendor, "AMD");
break;
case PCI_OHCI_VENDORID_APPLE:
ksprintf(sc->sc_vendor, "Apple");
break;
case PCI_OHCI_VENDORID_ATI:
ksprintf(sc->sc_vendor, "ATI");
break;
case PCI_OHCI_VENDORID_CMDTECH:
ksprintf(sc->sc_vendor, "CMDTECH");
break;
case PCI_OHCI_VENDORID_NEC:
ksprintf(sc->sc_vendor, "NEC");
break;
case PCI_OHCI_VENDORID_NVIDIA:
case PCI_OHCI_VENDORID_NVIDIA2:
ksprintf(sc->sc_vendor, "nVidia");
break;
case PCI_OHCI_VENDORID_OPTI:
ksprintf(sc->sc_vendor, "OPTi");
break;
case PCI_OHCI_VENDORID_SIS:
ksprintf(sc->sc_vendor, "SiS");
break;
default:
if (bootverbose)
device_printf(self, "(New OHCI DeviceId=0x%08x)\n",
pci_get_devid(self));
ksprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self));
}
err = bus_setup_intr(self, sc->irq_res, 0,
(driver_intr_t *) ohci_intr, sc, &sc->ih, NULL);
if (err) {
device_printf(self, "Could not setup irq, %d\n", err);
sc->ih = NULL;
ohci_pci_detach(self);
return ENXIO;
}
/*
* OHCI interrupts which occur early will leave them disabled,
* so run the interrupt manually once we're done with the init.
*/
err = ohci_init(sc);
if (err == 0)
err = device_probe_and_attach(sc->sc_bus.bdev);
if (err) {
device_printf(self, "USB init failed\n");
ohci_pci_detach(self);
return EIO;
}
return 0;
}
static int
ohci_pci_attach(device_t self)
{
ohci_softc_t *sc = device_get_softc(self);
int err;
int rid;
/* XXX where does it say so in the spec? */
sc->sc_bus.usbrev = USBREV_1_0;
pci_enable_busmaster(self);
/*
* Some Sun PCIO-2 USB controllers have their intpin register
* bogusly set to 0, although it should be 4. Correct that.
*/
if (pci_get_devid(self) == PCI_OHCI_DEVICEID_PCIO2USB &&
pci_get_intpin(self) == 0)
pci_set_intpin(self, 4);
rid = PCI_CBMEM;
sc->io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->io_res) {
device_printf(self, "Could not map memory\n");
return ENXIO;
}
sc->iot = rman_get_bustag(sc->io_res);
sc->ioh = rman_get_bushandle(sc->io_res);
rid = 0;
sc->irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->irq_res == NULL) {
device_printf(self, "Could not allocate irq\n");
ohci_pci_detach(self);
return ENXIO;
}
sc->sc_bus.bdev = device_add_child(self, "usb", -1);
if (!sc->sc_bus.bdev) {
device_printf(self, "Could not add USB device\n");
ohci_pci_detach(self);
return ENOMEM;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
/* ohci_pci_match will never return NULL if ohci_pci_probe succeeded */
device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self));
switch (pci_get_vendor(self)) {
case PCI_OHCI_VENDORID_ACERLABS:
sprintf(sc->sc_vendor, "AcerLabs");
break;
case PCI_OHCI_VENDORID_AMD:
sprintf(sc->sc_vendor, "AMD");
break;
case PCI_OHCI_VENDORID_APPLE:
sprintf(sc->sc_vendor, "Apple");
break;
case PCI_OHCI_VENDORID_ATI:
sprintf(sc->sc_vendor, "ATI");
break;
case PCI_OHCI_VENDORID_CMDTECH:
sprintf(sc->sc_vendor, "CMDTECH");
break;
case PCI_OHCI_VENDORID_NEC:
sprintf(sc->sc_vendor, "NEC");
break;
case PCI_OHCI_VENDORID_NVIDIA:
case PCI_OHCI_VENDORID_NVIDIA2:
sprintf(sc->sc_vendor, "nVidia");
break;
case PCI_OHCI_VENDORID_OPTI:
sprintf(sc->sc_vendor, "OPTi");
break;
case PCI_OHCI_VENDORID_SIS:
sprintf(sc->sc_vendor, "SiS");
break;
default:
if (bootverbose)
device_printf(self, "(New OHCI DeviceId=0x%08x)\n",
pci_get_devid(self));
sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self));
}
err = bus_setup_intr(self, sc->irq_res, INTR_TYPE_BIO, NULL, ohci_intr,
sc, &sc->ih);
if (err) {
device_printf(self, "Could not setup irq, %d\n", err);
sc->ih = NULL;
ohci_pci_detach(self);
return ENXIO;
}
/* Allocate a parent dma tag for DMA maps */
err = bus_dma_tag_create(bus_get_dma_tag(self), 1, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
BUS_SPACE_MAXSIZE_32BIT, USB_DMA_NSEG, BUS_SPACE_MAXSIZE_32BIT, 0,
NULL, NULL, &sc->sc_bus.parent_dmatag);
if (err) {
device_printf(self, "Could not allocate parent DMA tag (%d)\n",
err);
ohci_pci_detach(self);
return ENXIO;
}
/* Allocate a dma tag for transfer buffers */
err = bus_dma_tag_create(sc->sc_bus.parent_dmatag, 1, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
BUS_SPACE_MAXSIZE_32BIT, USB_DMA_NSEG, BUS_SPACE_MAXSIZE_32BIT, 0,
busdma_lock_mutex, &Giant, &sc->sc_bus.buffer_dmatag);
if (err) {
device_printf(self, "Could not allocate transfer tag (%d)\n",
err);
ohci_pci_detach(self);
return ENXIO;
}
err = ohci_init(sc);
if (!err) {
sc->sc_flags |= OHCI_SCFLG_DONEINIT;
err = device_probe_and_attach(sc->sc_bus.bdev);
}
if (err) {
device_printf(self, "USB init failed\n");
ohci_pci_detach(self);
return EIO;
}
return 0;
}
static int
ohci_pci_attach(device_t self)
{
ohci_softc_t *sc = device_get_softc(self);
int rid;
int err;
/* initialise some bus fields */
sc->sc_bus.parent = self;
sc->sc_bus.devices = sc->sc_devices;
sc->sc_bus.devices_max = OHCI_MAX_DEVICES;
/* get all DMA memory */
if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self),
&ohci_iterate_hw_softc)) {
return (ENOMEM);
}
sc->sc_dev = self;
pci_enable_busmaster(self);
/*
* Some Sun PCIO-2 USB controllers have their intpin register
* bogusly set to 0, although it should be 4. Correct that.
*/
if (pci_get_devid(self) == 0x1103108e && pci_get_intpin(self) == 0)
pci_set_intpin(self, 4);
rid = PCI_CBMEM;
sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->sc_io_res) {
device_printf(self, "Could not map memory\n");
goto error;
}
sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = rman_get_size(sc->sc_io_res);
rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(self, "Could not allocate irq\n");
goto error;
}
sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
if (!sc->sc_bus.bdev) {
device_printf(self, "Could not add USB device\n");
goto error;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
/*
* ohci_pci_match will never return NULL if ohci_pci_probe
* succeeded
*/
device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self));
switch (pci_get_vendor(self)) {
case PCI_OHCI_VENDORID_ACERLABS:
sprintf(sc->sc_vendor, "AcerLabs");
break;
case PCI_OHCI_VENDORID_AMD:
sprintf(sc->sc_vendor, "AMD");
break;
case PCI_OHCI_VENDORID_APPLE:
sprintf(sc->sc_vendor, "Apple");
break;
case PCI_OHCI_VENDORID_ATI:
sprintf(sc->sc_vendor, "ATI");
break;
case PCI_OHCI_VENDORID_CMDTECH:
sprintf(sc->sc_vendor, "CMDTECH");
break;
case PCI_OHCI_VENDORID_NEC:
sprintf(sc->sc_vendor, "NEC");
break;
case PCI_OHCI_VENDORID_NVIDIA:
case PCI_OHCI_VENDORID_NVIDIA2:
sprintf(sc->sc_vendor, "nVidia");
break;
case PCI_OHCI_VENDORID_OPTI:
sprintf(sc->sc_vendor, "OPTi");
break;
case PCI_OHCI_VENDORID_SIS:
sprintf(sc->sc_vendor, "SiS");
break;
case PCI_OHCI_VENDORID_SUN:
sprintf(sc->sc_vendor, "SUN");
break;
default:
if (bootverbose) {
device_printf(self, "(New OHCI DeviceId=0x%08x)\n",
pci_get_devid(self));
}
sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self));
}
/* sc->sc_bus.usbrev; set by ohci_init() */
#if (__FreeBSD_version >= 700031)
err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl);
#else
err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
(driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl);
#endif
if (err) {
device_printf(self, "Could not setup irq, %d\n", err);
sc->sc_intr_hdl = NULL;
goto error;
}
err = ohci_init(sc);
if (!err) {
err = device_probe_and_attach(sc->sc_bus.bdev);
}
if (err) {
device_printf(self, "USB init failed\n");
goto error;
}
return (0);
error:
ohci_pci_detach(self);
return (ENXIO);
}
