/* Attach or detach a device on a root hub port. */
static void ohci_attach(USBPort *port1, USBDevice *dev)
{
OHCIState *s = port1->opaque;
OHCIPort *port = &s->rhport[port1->index];
uint32_t old_state = port->ctrl;
if (dev) {
if (port->port.dev) {
usb_attach(port1, NULL);
}
/* set connect status */
port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC;
/* update speed */
if (dev->speed == USB_SPEED_LOW)
port->ctrl |= OHCI_PORT_LSDA;
else
port->ctrl &= ~OHCI_PORT_LSDA;
port->port.dev = dev;
/* notify of remote-wakeup */
if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND)
ohci_set_interrupt(s, OHCI_INTR_RD);
/* send the attach message */
usb_send_msg(dev, USB_MSG_ATTACH);
dprintf("usb-ohci: Attached port %d\n", port1->index);
} else {
/* set connect status */
if (port->ctrl & OHCI_PORT_CCS) {
port->ctrl &= ~OHCI_PORT_CCS;
port->ctrl |= OHCI_PORT_CSC;
}
/* disable port */
if (port->ctrl & OHCI_PORT_PES) {
port->ctrl &= ~OHCI_PORT_PES;
port->ctrl |= OHCI_PORT_PESC;
}
dev = port->port.dev;
if (dev) {
/* send the detach message */
usb_send_msg(dev, USB_MSG_DETACH);
}
port->port.dev = NULL;
dprintf("usb-ohci: Detached port %d\n", port1->index);
}
if (old_state != port->ctrl)
ohci_set_interrupt(s, OHCI_INTR_RHSC);
}
/* Set root hub status */
static void ohci_set_hub_status(OHCIState *ohci, uint32_t val)
{
uint32_t old_state;
old_state = ohci->rhstatus;
/* write 1 to clear OCIC */
if (val & OHCI_RHS_OCIC)
ohci->rhstatus &= ~OHCI_RHS_OCIC;
if (val & OHCI_RHS_LPS) {
int i;
for (i = 0; i < ohci->num_ports; i++)
ohci_port_power(ohci, i, 0);
DPRINTF("usb-ohci: powered down all ports\n");
}
if (val & OHCI_RHS_LPSC) {
int i;
for (i = 0; i < ohci->num_ports; i++)
ohci_port_power(ohci, i, 1);
DPRINTF("usb-ohci: powered up all ports\n");
}
if (val & OHCI_RHS_DRWE)
ohci->rhstatus |= OHCI_RHS_DRWE;
if (val & OHCI_RHS_CRWE)
ohci->rhstatus &= ~OHCI_RHS_DRWE;
if (old_state != ohci->rhstatus)
ohci_set_interrupt(ohci, OHCI_INTR_RHSC);
}
/* Do frame processing on frame boundary */
static void ohci_frame_boundary(void *opaque)
{
OHCIState *ohci = opaque;
struct ohci_hcca hcca;
ohci_read_hcca(ohci, ohci->hcca, &hcca);
/* Process all the lists at the end of the frame */
if (ohci->ctl & OHCI_CTL_PLE) {
int n;
n = ohci->frame_number & 0x1f;
ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0);
}
/* Cancel all pending packets if either of the lists has been disabled. */
if (ohci->async_td &&
ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) {
usb_cancel_packet(&ohci->usb_packet);
ohci->async_td = 0;
}
ohci->old_ctl = ohci->ctl;
ohci_process_lists(ohci, 0);
/* Frame boundary, so do EOF stuf here */
ohci->frt = ohci->fit;
/* Increment frame number and take care of endianness. */
ohci->frame_number = (ohci->frame_number + 1) & 0xffff;
hcca.frame = cpu_to_le16(ohci->frame_number);
if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) {
if (!ohci->done)
abort();
if (ohci->intr & ohci->intr_status)
ohci->done |= 1;
hcca.done = cpu_to_le32(ohci->done);
ohci->done = 0;
ohci->done_count = 7;
ohci_set_interrupt(ohci, OHCI_INTR_WD);
}
if (ohci->done_count != 7 && ohci->done_count != 0)
ohci->done_count--;
/* Do SOF stuff here */
ohci_sof(ohci);
/* Writeback HCCA */
ohci_put_hcca(ohci, ohci->hcca, &hcca);
}
/* Set root hub port status */
static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val)
{
uint32_t old_state;
OHCIPort *port;
port = &ohci->rhport[portnum];
old_state = port->ctrl;
/* Write to clear CSC, PESC, PSSC, OCIC, PRSC */
if (val & OHCI_PORT_WTC)
port->ctrl &= ~(val & OHCI_PORT_WTC);
if (val & OHCI_PORT_CCS)
port->ctrl &= ~OHCI_PORT_PES;
ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES);
if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) {
DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum);
}
if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) {
DPRINTF("usb-ohci: port %d: RESET\n", portnum);
usb_send_msg(port->port.dev, USB_MSG_RESET);
port->ctrl &= ~OHCI_PORT_PRS;
/* ??? Should this also set OHCI_PORT_PESC. */
port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC;
}
/* Invert order here to ensure in ambiguous case, device is
* powered up...
*/
if (val & OHCI_PORT_LSDA)
ohci_port_power(ohci, portnum, 0);
if (val & OHCI_PORT_PPS)
ohci_port_power(ohci, portnum, 1);
if (old_state != port->ctrl)
ohci_set_interrupt(ohci, OHCI_INTR_RHSC);
return;
}
static void ohci_detach(USBPort *port1)
{
OHCIState *s = port1->opaque;
OHCIPort *port = &s->rhport[port1->index];
uint32_t old_state = port->ctrl;
/* set connect status */
if (port->ctrl & OHCI_PORT_CCS) {
port->ctrl &= ~OHCI_PORT_CCS;
port->ctrl |= OHCI_PORT_CSC;
}
/* disable port */
if (port->ctrl & OHCI_PORT_PES) {
port->ctrl &= ~OHCI_PORT_PES;
port->ctrl |= OHCI_PORT_PESC;
}
DPRINTF("usb-ohci: Detached port %d\n", port1->index);
if (old_state != port->ctrl)
ohci_set_interrupt(s, OHCI_INTR_RHSC);
}
/* Attach or detach a device on a root hub port. */
static void ohci_attach(USBPort *port1)
{
OHCIState *s = port1->opaque;
OHCIPort *port = &s->rhport[port1->index];
/* set connect status */
port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC;
/* update speed */
if (port->port.dev->speed == USB_SPEED_LOW) {
port->ctrl |= OHCI_PORT_LSDA;
} else {
port->ctrl &= ~OHCI_PORT_LSDA;
}
/* notify of remote-wakeup */
if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
ohci_set_interrupt(s, OHCI_INTR_RD);
}
DPRINTF("usb-ohci: Attached port %d\n", port1->index);
}
/* Generate a SOF event, and set a timer for EOF */
static void ohci_sof(OHCIState *ohci)
{
ohci->sof_time = qemu_get_clock_ns(vm_clock);
qemu_mod_timer(ohci->eof_timer, ohci->sof_time + usb_frame_time);
ohci_set_interrupt(ohci, OHCI_INTR_SF);
}
