static int pcm049_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
omap44xx_add_i2c1(NULL);
omap44xx_add_mmc1(NULL);
gpmc_generic_init(0x10);
pcm049_network_init();
omap_add_gpmc_nand_device(&nand_plat);
#ifdef CONFIG_PARTITION
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "xload_raw");
dev_add_bb_dev("xload_raw", "xload");
devfs_add_partition("nand0", SZ_128K, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_128K + SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_PCM049);
return 0;
}
static int pcm049_devices_init(void)
{
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
omap44xx_add_i2c1(NULL);
omap44xx_add_mmc1(NULL);
gpmc_generic_init(0x10);
if (IS_ENABLED(CONFIG_DRIVER_NET_SMC911X))
pcm049_network_init();
omap_add_gpmc_nand_device(&nand_plat);
#ifdef CONFIG_PARTITION
devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "xload_raw");
dev_add_bb_dev("xload_raw", "xload");
devfs_add_partition("nand0", SZ_128K, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
dev_add_bb_dev("self_raw", "self0");
devfs_add_partition("nand0", SZ_128K + SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", "env0");
#endif
armlinux_set_architecture(MACH_TYPE_PCM049);
if (IS_ENABLED(CONFIG_DRIVER_VIDEO_OMAP))
omap_add_display(&pcm049_fb_data);
return 0;
}
static int panda_devices_init(void)
{
panda_boardrev_init();
if (gpio_get_value(182)) {
/* enable software ioreq */
sr32(OMAP44XX_SCRM_AUXCLK3, 8, 1, 0x1);
/* set for sys_clk (38.4MHz) */
sr32(OMAP44XX_SCRM_AUXCLK3, 1, 2, 0x0);
/* set divisor to 2 */
sr32(OMAP44XX_SCRM_AUXCLK3, 16, 4, 0x1);
/* set the clock source to active */
sr32(OMAP44XX_SCRM_ALTCLKSRC, 0, 1, 0x1);
/* enable clocks */
sr32(OMAP44XX_SCRM_ALTCLKSRC, 2, 2, 0x3);
} else {
/* enable software ioreq */
sr32(OMAP44XX_SCRM_AUXCLK1, 8, 1, 0x1);
/* set for PER_DPLL */
sr32(OMAP44XX_SCRM_AUXCLK1, 1, 2, 0x2);
/* set divisor to 16 */
sr32(OMAP44XX_SCRM_AUXCLK1, 16, 4, 0xf);
/* set the clock source to active */
sr32(OMAP44XX_SCRM_ALTCLKSRC, 0, 1, 0x1);
/* enable clocks */
sr32(OMAP44XX_SCRM_ALTCLKSRC, 2, 2, 0x3);
}
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
omap44xx_add_i2c1(NULL);
omap44xx_add_mmc1(NULL);
panda_ehci_init();
panda_led_init();
armlinux_set_bootparams((void *)0x80000100);
armlinux_set_architecture(MACH_TYPE_OMAP4_PANDA);
return 0;
}
static int archosg9_devices_init(void){
i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
omap44xx_add_i2c1(NULL);
omap44xx_add_mmc1(NULL);
#if defined(CONFIG_KEYBOARD_TWL6030) && defined(CONFIG_KEYBOARD_GPIO)
add_generic_device_res("twl6030_pwrbtn", DEVICE_ID_DYNAMIC, 0, 0,
&pwrbtn_data);
add_gpio_keys_device(DEVICE_ID_DYNAMIC, &gk_data);
#endif
armlinux_set_bootparams((void *)0x80000100);
/*
* This should be:
* armlinux_set_architecture(MACH_TYPE_OMAP4_ARCHOSG9);
* But Archos has not registered it's board to arch/arm/tools/mach-types
* So here there is the hardcoded value
*/
armlinux_set_architecture(5032);
armlinux_set_revision(5);
armlinux_set_atag_appender(archos_append_atags);
return 0;
}
