C++ (Cpp) omap_add_gpmc_nand_device示例

示例#1

文件： board.c 项目： jiangxilong/barebox

static int beagle_devices_init(void)
{
	if (barebox_arm_machine() != MACH_TYPE_OMAP3_BEAGLE)
		return 0;

	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
	omap3_add_i2c1(NULL);

#ifdef CONFIG_USB_EHCI_OMAP
	if (ehci_omap_init(&omap_ehci_pdata) >= 0)
		omap3_add_ehci(&ehci_pdata);
#endif /* CONFIG_USB_EHCI_OMAP */
#ifdef CONFIG_OMAP_GPMC
	/* WP is made high and WAIT1 active Low */
	gpmc_generic_init(0x10);
#endif
	omap_add_gpmc_nand_device(&nand_plat);

	omap3_add_mmc1(NULL);

	armlinux_set_architecture(MACH_TYPE_OMAP3_BEAGLE);

	bbu_register_std_file_update("nand-xload", 0,
			"/dev/nand0.xload.bb", filetype_ch_image);
	bbu_register_std_file_update("nand", 0,
			"/dev/nand0.barebox.bb", filetype_arm_barebox);

	defaultenv_append_directory(defaultenv_beagle);

	return 0;
}

示例#2

文件： board.c 项目： SayCV/barebox-at91

static int pcm049_devices_init(void)
{
	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
	omap44xx_add_i2c1(NULL);
	omap44xx_add_mmc1(NULL);

	gpmc_generic_init(0x10);

	pcm049_network_init();

	omap_add_gpmc_nand_device(&nand_plat);

#ifdef CONFIG_PARTITION
	devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "xload_raw");
	dev_add_bb_dev("xload_raw", "xload");
	devfs_add_partition("nand0", SZ_128K, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", SZ_128K + SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
#endif

	armlinux_set_bootparams((void *)0x80000100);
	armlinux_set_architecture(MACH_TYPE_PCM049);

	return 0;
}

示例#3

文件： board.c 项目： RobertCNelson/barebox

static int pcm049_devices_init(void)
{
	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
	omap44xx_add_i2c1(NULL);
	omap44xx_add_mmc1(NULL);

	gpmc_generic_init(0x10);

	if (IS_ENABLED(CONFIG_DRIVER_NET_SMC911X))
		pcm049_network_init();

	omap_add_gpmc_nand_device(&nand_plat);

#ifdef CONFIG_PARTITION
	devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED, "xload_raw");
	dev_add_bb_dev("xload_raw", "xload");
	devfs_add_partition("nand0", SZ_128K, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", SZ_128K + SZ_512K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
#endif

	armlinux_set_architecture(MACH_TYPE_PCM049);

	if (IS_ENABLED(CONFIG_DRIVER_VIDEO_OMAP))
		omap_add_display(&pcm049_fb_data);

	return 0;
}

示例#4

文件： board.c 项目： AshishNamdev/barebox

static void pcm051_nand_init(void)
{
	pcm051_enable_nand_pin_mux();

	gpmc_generic_init(0x12);

	omap_add_gpmc_nand_device(&nand_plat);
}

示例#5

文件： board.c 项目： phytecindiabangalore/Cosmic-AM335x-bootloader

static void pcm051_nand_init(void)
{
    pcm051_enable_nand_pin_mux();

    gpmc_generic_init(0x12);

    add_generic_device("elm", 0, NULL, 0x48080000, SZ_64K,
                       IORESOURCE_MEM, NULL);

    omap_add_gpmc_nand_device(&nand_plat);
}

示例#6

文件： pca-a-l1.c 项目： gazoo74/barebox

static int pcaal1_init_devices(void)
{
    omap_add_gpmc_nand_device(&nand_plat);

    omap3_add_mmc1(&pcaal1_hsmmc_plat);

#ifdef CONFIG_DRIVER_NET_SMC911X
    pcaal1_setup_net_chip();
    add_generic_device("smc911x", DEVICE_ID_DYNAMIC, NULL, SMC911X_BASE, SZ_4K,
                       IORESOURCE_MEM, NULL);
#endif

    armlinux_set_architecture(MACH_TYPE_PCAAL1);

    return 0;
}

示例#7

文件： board.c 项目： bmourit/barebox

static int beagle_devices_init(void)
{
	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
	omap3_add_i2c1(NULL);

#ifdef CONFIG_USB_EHCI_OMAP
	if (ehci_omap_init(&omap_ehci_pdata) >= 0)
		omap3_add_ehci(&ehci_pdata);
#endif /* CONFIG_USB_EHCI_OMAP */
#ifdef CONFIG_OMAP_GPMC
	/* WP is made high and WAIT1 active Low */
	gpmc_generic_init(0x10);
#endif
	omap_add_gpmc_nand_device(&nand_plat);

	omap3_add_mmc1(NULL);

	armlinux_set_architecture(MACH_TYPE_OMAP3_BEAGLE);

	return 0;
}

示例#8

static int pcaaxl2_devices_init(void)
{
	u32 value;

	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));
	add_generic_device("i2c-omap", DEVICE_ID_DYNAMIC, NULL, 0x48070000, 0x1000,
				IORESOURCE_MEM, NULL);

	value = readl(OMAP4_CONTROL_PBIASLITE);
	value &= ~OMAP4_MMC1_PBIASLITE_VMODE;
	value |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |	OMAP4_MMC1_PWRDNZ);
	writel(value, OMAP4_CONTROL_PBIASLITE);

	add_generic_device("omap-hsmmc", DEVICE_ID_DYNAMIC, NULL, 0x4809C100, SZ_4K,
			   IORESOURCE_MEM, &mmc_device);

	gpmc_generic_init(0x10);

	pcaaxl2_network_init();

	omap_add_gpmc_nand_device(&nand_plat);

#ifdef CONFIG_PARTITION
	devfs_add_partition("nand0", 0x00000, SZ_128K,
			DEVFS_PARTITION_FIXED, "xload_raw");
	dev_add_bb_dev("xload_raw", "xload");
	devfs_add_partition("nand0", SZ_128K, SZ_256K,
			DEVFS_PARTITION_FIXED, "self_raw");
	dev_add_bb_dev("self_raw", "self0");
	devfs_add_partition("nand0", SZ_128K + SZ_256K, SZ_128K,
			DEVFS_PARTITION_FIXED, "env_raw");
	dev_add_bb_dev("env_raw", "env0");
#endif

	armlinux_set_bootparams((void *)0x80000100);
	armlinux_set_architecture(MACH_TYPE_PCAAXL2);

	return 0;
}