/**
* ehci_hcd_omap_drv_probe - initialize TI-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
*/
static int ehci_hcd_omap_drv_probe(struct platform_device *dev)
{
int retval = 0;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
dev_dbg(&dev->dev, "ehci_hcd_omap_drv_probe()\n");
if (usb_disabled())
return -ENODEV;
if (dev->resource[1].flags != IORESOURCE_IRQ) {
dev_dbg(&dev->dev, "resource[1] is not IORESOURCE_IRQ\n");
retval = -ENOMEM;
}
hcd = usb_create_hcd(&ehci_omap_hc_driver, &dev->dev, dev->dev.bus_id);
if (!hcd)
return -ENOMEM;
retval = omap_start_ehc(dev, hcd);
if (retval)
return retval;
hcd->rsrc_start = 0;
hcd->rsrc_len = 0;
hcd->rsrc_start = dev->resource[0].start;
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&dev->dev, "ioremap failed\n");
return -ENOMEM;
}
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
ehci->sbrn = 0x20;
ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = readl(&ehci->caps->hcs_params);
/* SET 1 micro-frame Interrupt interval */
writel(readl(&ehci->regs->command) | (1<<16), &ehci->regs->command);
retval = usb_add_hcd(hcd, dev->resource[1].start,
IRQF_DISABLED | IRQF_SHARED);
if (retval == 0)
return retval;
dev_dbg(hcd->self.controller, "ERR: add_hcd\n");
omap_stop_ehc(dev, hcd);
iounmap(hcd->regs);
usb_put_hcd(hcd);
return retval;
}
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
static int ehci_hcd_omap_probe(struct platform_device *pdev)
{
struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
struct ehci_hcd_omap *omap;
struct resource *res;
struct usb_hcd *hcd;
int irq = platform_get_irq(pdev, 0);
int ret = -ENODEV;
printk(KERN_DEBUG " ehci_hcd_omap_probe\n");
if (!pdata) {
dev_dbg(&pdev->dev, "missing platform_data\n");
goto err_pdata;
}
if (usb_disabled())
{
printk(KERN_DEBUG " usb_disabled\n");
goto err_disabled;
}
omap = kzalloc(sizeof(*omap), GFP_KERNEL);
printk(KERN_DEBUG " kzalloc done\n");
if (!omap) {
printk(KERN_DEBUG " problem with memory allocation\n");
ret = -ENOMEM;
goto err_disabled;
}
hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
printk(KERN_DEBUG " usb_create hcd done\n");
if (!hcd) {
printk(KERN_DEBUG " failed to create HCD\n");
dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
ret = -ENOMEM;
goto err_create_hcd;
}
platform_set_drvdata(pdev, omap);
omap->dev = &pdev->dev;
omap->phy_reset = pdata->phy_reset;
omap->reset_gpio_port[0] = pdata->reset_gpio_port[0];
omap->reset_gpio_port[1] = pdata->reset_gpio_port[1];
omap->reset_gpio_port[2] = pdata->reset_gpio_port[2];
omap->port_mode[0] = pdata->port_mode[0];
omap->port_mode[1] = pdata->port_mode[1];
omap->port_mode[2] = pdata->port_mode[2];
omap->ehci = hcd_to_ehci(hcd);
omap->ehci->sbrn = 0x20;
omap->suspended = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
printk(KERN_DEBUG " platform get ressources 0 done\n");
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
printk(KERN_DEBUG " EHCI ioremap failed\n");
dev_err(&pdev->dev, "EHCI ioremap failed\n");
ret = -ENOMEM;
goto err_ioremap;
}
/* we know this is the memory we want, no need to ioremap again */
omap->ehci->caps = hcd->regs;
omap->ehci_base = hcd->regs;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
printk(KERN_DEBUG " platform get ressources 1 done\n");
omap->uhh_base = ioremap(res->start, resource_size(res));
if (!omap->uhh_base) {
printk(KERN_DEBUG " UHH ioremap failed\n");
dev_err(&pdev->dev, "UHH ioremap failed\n");
ret = -ENOMEM;
goto err_uhh_ioremap;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
printk(KERN_DEBUG " platform get ressources 2 done\n");
ret = omap_start_ehc(omap, hcd);
if (ret) {
dev_dbg(&pdev->dev, "failed to start ehci\n");
printk(KERN_DEBUG " failed to start ehci\n");
goto err_start;
}
omap->ehci->regs = hcd->regs
+ HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
dbg_hcs_params(omap->ehci, "reset");
dbg_hcc_params(omap->ehci, "reset");
/* cache this readonly data; minimize chip reads */
omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
/* SET 1 micro-frame Interrupt interval */
writel(readl(&omap->ehci->regs->command) | (1 << 16),
&omap->ehci->regs->command);
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret) {
dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
printk(KERN_DEBUG " add hcd done\n");
return 0;
err_add_hcd:
omap_stop_ehc(omap, hcd);
err_start:
//iounmap(omap->tll_base);
err_tll_ioremap:
iounmap(omap->uhh_base);
err_uhh_ioremap:
iounmap(hcd->regs);
err_ioremap:
usb_put_hcd(hcd);
err_create_hcd:
kfree(omap);
err_disabled:
err_pdata:
return ret;
}
/**
* usb_hcd_omap_probe - initialize OMAP-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
static int usb_hcd_omap_probe (const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval, irq;
struct usb_hcd *hcd = 0;
struct ohci_hcd *ohci;
#ifdef CONFIG_MACH_MAPPHONE
struct ehci_hcd_omap *omap;
struct omap_usb_config *pdata = pdev->dev.platform_data;
struct resource *res;
int ret = -ENODEV;
retval = 0;
#else
if (pdev->num_resources != 2) {
printk(KERN_ERR "hcd probe: invalid num_resources: %i\n",
pdev->num_resources);
return -ENODEV;
}
if (pdev->resource[0].flags != IORESOURCE_MEM
|| pdev->resource[1].flags != IORESOURCE_IRQ) {
printk(KERN_ERR "hcd probe: invalid resource type\n");
return -ENODEV;
}
#endif
#ifndef CONFIG_ARCH_OMAP34XX
usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
if (IS_ERR(usb_host_ck))
return PTR_ERR(usb_host_ck);
if (!cpu_is_omap15xx())
usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
else
usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
if (IS_ERR(usb_dc_ck)) {
clk_put(usb_host_ck);
return PTR_ERR(usb_dc_ck);
}
#endif
#ifdef CONFIG_MACH_MAPPHONE
omap = kzalloc(sizeof(*omap), GFP_KERNEL);
if (!omap) {
ret = -ENOMEM;
goto err0;
}
#endif
hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
goto err0;
}
#ifndef CONFIG_MACH_MAPPHONE
#if defined(CONFIG_ARCH_OMAP34XX)
clk_enable(clk_get(NULL, "usbhost_ick"));
clk_enable(clk_get(NULL, "usbtll_ick"));
clk_enable(clk_get(NULL, "usbtll_fck"));
clk_enable(clk_get(NULL, "usbhost_120m_fck"));
clk_enable(clk_get(NULL, "usbhost_48m_fck"));
#endif
hcd->rsrc_start = pdev->resource[0].start;
hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
#else
platform_set_drvdata(pdev, hcd);
omap->dev = pdev;
memcpy(&omap->port_data, &pdata->port_data, sizeof(omap->port_data));
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
#endif
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dev_dbg(&pdev->dev, "request_mem_region failed\n");
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "can't ioremap OHCI HCD\n");
retval = -ENOMEM;
goto err2;
}
ohci = hcd_to_ohci(hcd);
ohci_hcd_init(ohci);
host_initialized = 0;
host_enabled = 1;
#ifdef CONFIG_MACH_MAPPHONE
ohci_irq_num = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
omap->uhh_base = ioremap(res->start, resource_size(res));
if (!omap->uhh_base) {
dev_err(&pdev->dev, "UHH ioremap failed\n");
ret = -ENOMEM;
goto err3;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
omap->tll_base = ioremap(res->start, resource_size(res));
if (!omap->tll_base) {
dev_err(&pdev->dev, "TLL ioremap failed\n");
ret = -ENOMEM;
goto err4;
}
#endif
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
retval = -ENXIO;
#ifdef CONFIG_MACH_MAPPHONE
goto err5;
#else
goto err3;
#endif
}
#ifdef CONFIG_MACH_MAPPHONE
retval = omap_start_ehc(omap, hcd);
if (retval) {
dev_dbg(&pdev->dev, "failed to start ohci\n");
goto err5;
}
#endif
retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
if (retval)
#ifndef CONFIG_MACH_MAPPHONE
goto err3;
#else
goto err5;
else
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
static int ehci_hcd_omap_probe(struct platform_device *pdev)
{
struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
struct ehci_hcd_omap *omap;
struct resource *res;
struct usb_hcd *hcd;
int irq = platform_get_irq(pdev, 0);
int ret = -ENODEV;
int i;
char supply[7];
if (!pdata) {
dev_dbg(&pdev->dev, "missing platform_data\n");
goto err_pdata;
}
if (usb_disabled())
goto err_disabled;
omap = kzalloc(sizeof(*omap), GFP_KERNEL);
if (!omap) {
ret = -ENOMEM;
goto err_disabled;
}
hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
ret = -ENOMEM;
goto err_create_hcd;
}
platform_set_drvdata(pdev, omap);
omap->dev = &pdev->dev;
omap->phy_reset = pdata->phy_reset;
omap->reset_gpio_port[0] = pdata->reset_gpio_port[0];
omap->reset_gpio_port[1] = pdata->reset_gpio_port[1];
omap->reset_gpio_port[2] = pdata->reset_gpio_port[2];
omap->port_mode[0] = pdata->port_mode[0];
omap->port_mode[1] = pdata->port_mode[1];
omap->port_mode[2] = pdata->port_mode[2];
omap->ehci = hcd_to_ehci(hcd);
omap->ehci->sbrn = 0x20;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "EHCI ioremap failed\n");
ret = -ENOMEM;
goto err_ioremap;
}
/* we know this is the memory we want, no need to ioremap again */
omap->ehci->caps = hcd->regs;
omap->ehci_base = hcd->regs;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
omap->uhh_base = ioremap(res->start, resource_size(res));
if (!omap->uhh_base) {
dev_err(&pdev->dev, "UHH ioremap failed\n");
ret = -ENOMEM;
goto err_uhh_ioremap;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
omap->tll_base = ioremap(res->start, resource_size(res));
if (!omap->tll_base) {
dev_err(&pdev->dev, "TLL ioremap failed\n");
ret = -ENOMEM;
goto err_tll_ioremap;
}
/* get ehci regulator and enable */
for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) {
omap->regulator[i] = NULL;
continue;
}
snprintf(supply, sizeof(supply), "hsusb%d", i);
omap->regulator[i] = regulator_get(omap->dev, supply);
if (IS_ERR(omap->regulator[i])) {
omap->regulator[i] = NULL;
dev_dbg(&pdev->dev,
"failed to get ehci port%d regulator\n", i);
} else {
regulator_enable(omap->regulator[i]);
}
}
ret = omap_start_ehc(omap, hcd);
if (ret) {
dev_dbg(&pdev->dev, "failed to start ehci\n");
goto err_start;
}
omap->ehci->regs = hcd->regs
+ HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
dbg_hcs_params(omap->ehci, "reset");
dbg_hcc_params(omap->ehci, "reset");
/* cache this readonly data; minimize chip reads */
omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret) {
dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
/* root ports should always stay powered */
ehci_port_power(omap->ehci, 1);
return 0;
err_add_hcd:
omap_stop_ehc(omap, hcd);
err_start:
for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
if (omap->regulator[i]) {
regulator_disable(omap->regulator[i]);
regulator_put(omap->regulator[i]);
}
}
iounmap(omap->tll_base);
err_tll_ioremap:
iounmap(omap->uhh_base);
err_uhh_ioremap:
iounmap(hcd->regs);
err_ioremap:
usb_put_hcd(hcd);
err_create_hcd:
kfree(omap);
err_disabled:
err_pdata:
return ret;
}
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
static int ehci_hcd_omap_probe(struct platform_device *pdev)
{
struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
struct ehci_hcd_omap *omap;
struct resource *res;
struct usb_hcd *hcd;
int irq = platform_get_irq(pdev, 0);
int ret = -ENODEV;
int i;
char supply[7];
char supply_aux[11];
if (!pdata) {
dev_dbg(&pdev->dev, "missing platform_data\n");
goto err_pdata;
}
if (usb_disabled())
goto err_disabled;
omap = kzalloc(sizeof(*omap), GFP_KERNEL);
if (!omap) {
ret = -ENOMEM;
goto err_disabled;
}
/* Electrical test support
* Interface is /sys/devices/platform/ehci-omap.0/portn
*/
if (pdata->port_mode[0] != EHCI_HCD_OMAP_MODE_UNKNOWN)
ret = device_create_file(&pdev->dev, &dev_attr_port1);
if (pdata->port_mode[1] != EHCI_HCD_OMAP_MODE_UNKNOWN)
ret = device_create_file(&pdev->dev, &dev_attr_port2);
if (pdata->port_mode[2] != EHCI_HCD_OMAP_MODE_UNKNOWN)
ret = device_create_file(&pdev->dev, &dev_attr_port3);
ghcd = hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
ret = -ENOMEM;
goto err_create_hcd;
}
platform_set_drvdata(pdev, omap);
omap->dev = &pdev->dev;
omap->phy_reset = pdata->phy_reset;
omap->reset_gpio_port[0] = pdata->reset_gpio_port[0];
omap->reset_gpio_port[1] = pdata->reset_gpio_port[1];
omap->reset_gpio_port[2] = pdata->reset_gpio_port[2];
omap->port_mode[0] = pdata->port_mode[0];
omap->port_mode[1] = pdata->port_mode[1];
omap->port_mode[2] = pdata->port_mode[2];
omap->aux[0] = pdata->aux[0];
omap->aux[1] = pdata->aux[1];
omap->aux[2] = pdata->aux[2];
omap->ehci = hcd_to_ehci(hcd);
omap->ehci->sbrn = 0x20;
gb_omap = omap;
omap->suspended = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "EHCI ioremap failed\n");
ret = -ENOMEM;
goto err_ioremap;
}
/* we know this is the memory we want, no need to ioremap again */
omap->ehci->caps = hcd->regs;
omap->ehci_base = hcd->regs;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
omap->uhh_base = ioremap(res->start, resource_size(res));
if (!omap->uhh_base) {
dev_err(&pdev->dev, "UHH ioremap failed\n");
ret = -ENOMEM;
goto err_uhh_ioremap;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
omap->tll_base = ioremap(res->start, resource_size(res));
if (!omap->tll_base) {
dev_err(&pdev->dev, "TLL ioremap failed\n");
ret = -ENOMEM;
goto err_tll_ioremap;
}
/* get ehci regulator and enable */
for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) {
omap->regulator[i] = NULL;
continue;
}
snprintf(supply, 7, "hsusb%d", i);
omap->regulator[i] = regulator_get(omap->dev, supply);
if (IS_ERR(omap->regulator[i])) {
dev_dbg(&pdev->dev,
"failed to get ehci port%d regulator\n", i);
omap->regulator[i] = NULL;
} else {
regulator_enable(omap->regulator[i]);
}
/* enable auxiliary supply if required */
if (omap->aux[i]) {
snprintf(supply_aux, 11, "hsusb%d-aux", i);
omap->regulator_aux[i] =
regulator_get(omap->dev, supply_aux);
if (IS_ERR(omap->regulator_aux[i])) {
dev_dbg(&pdev->dev,
"failed to get ehci port%d aux regulator\n", i);
omap->regulator[i] = NULL;
} else {
regulator_enable(omap->regulator_aux[i]);
}
}
}
ret = omap_start_ehc(omap, hcd);
if (ret) {
dev_dbg(&pdev->dev, "failed to start ehci\n");
goto err_start;
}
omap->ehci->regs = hcd->regs
+ HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
/* cache this readonly data; minimize chip reads */
omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
/* SET 1 micro-frame Interrupt interval */
writel(readl(&omap->ehci->regs->command) | (1 << 16),
&omap->ehci->regs->command);
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret) {
dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
/* here we "know" root ports should always stay powered */
ehci_port_power(omap->ehci, 1);
return 0;
err_add_hcd:
omap_stop_ehc(omap, hcd);
err_start:
iounmap(omap->tll_base);
err_tll_ioremap:
iounmap(omap->uhh_base);
err_uhh_ioremap:
iounmap(hcd->regs);
err_ioremap:
usb_put_hcd(hcd);
err_create_hcd:
kfree(omap);
err_disabled:
err_pdata:
return ret;
}
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
static int ehci_hcd_omap_probe(struct platform_device *pdev)
{
struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
struct ehci_hcd_omap *omap;
struct resource *res;
struct usb_hcd *hcd;
int irq = platform_get_irq(pdev, 0);
int ret = -ENODEV;
int i;
char supply[7];
char supply_aux[11];
if (!pdata) {
dev_dbg(&pdev->dev, "missing platform_data\n");
goto err_pdata;
}
if (usb_disabled())
goto err_disabled;
omap = kzalloc(sizeof(*omap), GFP_KERNEL);
if (!omap) {
ret = -ENOMEM;
goto err_disabled;
}
/* Electrical test support
* Interface is /sys/devices/platform/ehci-omap.0/portn
*/
if (pdata->port_mode[0] != EHCI_HCD_OMAP_MODE_UNKNOWN)
ret = device_create_file(&pdev->dev, &dev_attr_port1);
if (pdata->port_mode[1] != EHCI_HCD_OMAP_MODE_UNKNOWN)
ret = device_create_file(&pdev->dev, &dev_attr_port2);
if (pdata->port_mode[2] != EHCI_HCD_OMAP_MODE_UNKNOWN)
ret = device_create_file(&pdev->dev, &dev_attr_port3);
ghcd = hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
ret = -ENOMEM;
goto err_create_hcd;
}
platform_set_drvdata(pdev, omap);
omap->dev = &pdev->dev;
omap->phy_reset = pdata->phy_reset;
omap->reset_gpio_port[0] = pdata->reset_gpio_port[0];
omap->reset_gpio_port[1] = pdata->reset_gpio_port[1];
omap->reset_gpio_port[2] = pdata->reset_gpio_port[2];
omap->port_mode[0] = pdata->port_mode[0];
omap->port_mode[1] = pdata->port_mode[1];
omap->port_mode[2] = pdata->port_mode[2];
omap->aux[0] = pdata->aux[0];
omap->aux[1] = pdata->aux[1];
omap->aux[2] = pdata->aux[2];
omap->ehci = hcd_to_ehci(hcd);
omap->ehci->sbrn = 0x20;
gb_omap = omap;
omap->suspended = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "EHCI ioremap failed\n");
ret = -ENOMEM;
goto err_ioremap;
}
/* we know this is the memory we want, no need to ioremap again */
omap->ehci->caps = hcd->regs;
omap->ehci_base = hcd->regs;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
omap->uhh_base = ioremap(res->start, resource_size(res));
if (!omap->uhh_base) {
dev_err(&pdev->dev, "UHH ioremap failed\n");
ret = -ENOMEM;
goto err_uhh_ioremap;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
omap->tll_base = ioremap(res->start, resource_size(res));
if (!omap->tll_base) {
dev_err(&pdev->dev, "TLL ioremap failed\n");
ret = -ENOMEM;
goto err_tll_ioremap;
}
/* get ehci regulator and enable */
for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) {
omap->regulator[i] = NULL;
continue;
}
snprintf(supply, 7, "hsusb%d", i);
omap->regulator[i] = regulator_get(omap->dev, supply);
if (IS_ERR(omap->regulator[i])) {
dev_dbg(&pdev->dev,
"failed to get ehci port%d regulator\n", i);
omap->regulator[i] = NULL;
} else {
regulator_enable(omap->regulator[i]);
}
/* enable auxiliary supply if required */
if (omap->aux[i]) {
snprintf(supply_aux, 11, "hsusb%d-aux", i);
omap->regulator_aux[i] =
regulator_get(omap->dev, supply_aux);
if (IS_ERR(omap->regulator_aux[i])) {
dev_dbg(&pdev->dev,
"failed to get ehci port%d aux regulator\n", i);
omap->regulator[i] = NULL;
} else {
regulator_enable(omap->regulator_aux[i]);
}
}
}
ret = omap_start_ehc(omap, hcd);
if (ret) {
dev_dbg(&pdev->dev, "failed to start ehci\n");
goto err_start;
}
omap->ehci->regs = hcd->regs
+ HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
dbg_hcs_params(omap->ehci, "reset");
dbg_hcc_params(omap->ehci, "reset");
/* cache this readonly data; minimize chip reads */
omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
/* SET 1 micro-frame Interrupt interval */
writel(readl(&omap->ehci->regs->command) | (1 << 16),
&omap->ehci->regs->command);
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret) {
dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) &&
gpio_is_valid(omap->reset_gpio_port[0])) {
gpio_request(omap->reset_gpio_port[0], "HSUSB0 reset");
gpio_direction_output(omap->reset_gpio_port[0], 0);
}
if ((omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) &&
gpio_is_valid(omap->reset_gpio_port[1])) {
gpio_request(omap->reset_gpio_port[1], "HSUSB1 reset");
gpio_direction_output(omap->reset_gpio_port[1], 0);
}
/* reset the USB PHY */
if (omap->phy_reset)
ehci_omap_phy_reset(omap);
/* root ports should always stay powered */
ehci_port_power(omap->ehci, 1);
#ifdef CONFIG_LOGIC_OMAP3530_USB3320_HACK
{
struct usb_device *rdev = hcd->self.root_hub;
omap->ehci->no_selective_suspend = 1;
// Kill the auto suspend delay for the root hub
// Since we only have one port used, it's better
// if we go down right away.
if(rdev)
{
rdev->autosuspend_delay = 0;
}
}
#endif
#ifdef CONFIG_LOGIC_OMAP3530_USB3320_HACK
usb3320_hack_init(ehci_hcd_omap_hack_handler, &pdev->dev);
#endif
// Default wakeup enable should be off.
device_init_wakeup(&pdev->dev, 1);
device_set_wakeup_enable(&pdev->dev, 0);
return 0;
err_add_hcd:
omap_stop_ehc(omap, hcd);
err_start:
for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
if (omap->regulator[i]) {
regulator_disable(omap->regulator[i]);
regulator_put(omap->regulator[i]);
}
}
iounmap(omap->tll_base);
err_tll_ioremap:
iounmap(omap->uhh_base);
err_uhh_ioremap:
iounmap(hcd->regs);
err_ioremap:
usb_put_hcd(hcd);
kfree(omap);
err_create_hcd:
kfree(omap);
err_disabled:
err_pdata:
return ret;
}
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
static int ehci_hcd_omap_probe(struct platform_device *pdev)
{
struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
struct ehci_hcd_omap *omap;
struct resource *res;
struct usb_hcd *hcd;
int irq = platform_get_irq(pdev, 0);
int ret = -ENODEV;
if (!pdata) {
dev_dbg(&pdev->dev, "missing platform_data\n");
goto err_pdata;
}
#ifdef CONFIG_MAPPHONE_2NDBOOT
/* FIXME: Find proper defines for the addresses */
/* We need to get the interrupts in order */
printk(KERN_INFO "EHCI-OMAP: Fixing after 2nd-boot\n");
/* Mask IRQs */
omap_writel(0x2000, 0x482000cc);
/* Reset USBINTR */
omap_writel(0x00, 0x48064818);
/* Set ERROR status on everything (this may not be necessary) */
omap_writel(0x3f, 0x48064814);
/* Clear HCINTERRUPTSTATUS */
omap_writel(0x4000007f, 0x4806440c);
/* Clear HCINTERRUPTDISABLE */
omap_writel(0xc000007f, 0x48064414);
#endif
if (usb_disabled())
goto err_disabled;
#ifdef CONFIG_MAPPHONE_2NDBOOT
/* Enable IRQs */
omap_writel(0x0, 0x4806201c);
/* Set them to event pending */
omap_writel(0x7, 0x48062018);
#endif
ret = request_irq(78, usbtll_irq, IRQF_DISABLED | IRQF_SHARED,
"usbtll", pdev);
if (ret < 0) {
printk(KERN_ERR "\nCan't get USBTLL IRQ\n");
goto err_disabled;
}
omap = kzalloc(sizeof(*omap), GFP_KERNEL);
if (!omap) {
ret = -ENOMEM;
goto err_create_hcd;
}
hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
ret = -ENOMEM;
goto err_create_hcd;
}
platform_set_drvdata(pdev, omap);
omap->dev = pdev;
memcpy(&omap->port_data, &pdata->port_data, sizeof(omap->port_data));
omap->ehci = hcd_to_ehci(hcd);
omap->ehci->sbrn = 0x20;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "EHCI ioremap failed\n");
ret = -ENOMEM;
goto err_ioremap;
}
/* we know this is the memory we want, no need to ioremap again */
omap->ehci->caps = hcd->regs;
omap->ehci_base = hcd->regs;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
omap->uhh_base = ioremap(res->start, resource_size(res));
if (!omap->uhh_base) {
dev_err(&pdev->dev, "UHH ioremap failed\n");
ret = -ENOMEM;
goto err_uhh_ioremap;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
omap->tll_base = ioremap(res->start, resource_size(res));
if (!omap->tll_base) {
dev_err(&pdev->dev, "TLL ioremap failed\n");
ret = -ENOMEM;
goto err_tll_ioremap;
}
#ifdef CONFIG_HAS_WAKELOCK
wake_lock_init(&omap->ehci->wake_lock_ehci_rwu,
WAKE_LOCK_SUSPEND, "ehci_rwu");
wake_lock_init(&omap->ehci->wake_lock_ehci_pm,
WAKE_LOCK_SUSPEND, "ehci_pm");
#endif
ret = omap_start_ehc(omap, hcd);
if (ret) {
dev_dbg(&pdev->dev, "failed to start ehci\n");
goto err_start;
}
omap->ehci->regs = hcd->regs
+ HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
/* cache this readonly data; minimize chip reads */
omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
/* SET 1 micro-frame Interrupt interval */
writel(readl(&omap->ehci->regs->command) | (1 << 16),
&omap->ehci->regs->command);
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret) {
dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
return 0;
err_add_hcd:
omap_stop_ehc(omap, hcd);
err_start:
iounmap(omap->tll_base);
err_tll_ioremap:
iounmap(omap->uhh_base);
err_uhh_ioremap:
iounmap(hcd->regs);
err_ioremap:
usb_put_hcd(hcd);
err_create_hcd:
err_disabled:
err_pdata:
return ret;
}
