int
ompi_mtl_mx_add_procs(struct mca_mtl_base_module_t *mtl,
size_t nprocs,
struct ompi_proc_t** procs)
{
int i;
assert(mtl == &ompi_mtl_mx.super);
for( i = 0; i < (int) nprocs; i++ ){
mca_mtl_mx_endpoint_t* mtl_mx_endpoint =
mca_mtl_mx_endpoint_create(procs[i]);
if(NULL == mtl_mx_endpoint) {
return OMPI_ERROR;
}
procs[i]->proc_endpoints[OMPI_PROC_ENDPOINT_TAG_MTL] =
mtl_mx_endpoint;
}
/* because mx_connect isn't an interupting function, need to
progress MX as often as possible during the stage gate 2. This
would have happened after the stage gate anyway, so we're just
speeding things up a bit. */
#if OMPI_ENABLE_PROGRESS_THREADS == 0
/* switch from letting us sit in the event library for a bit each
time through opal_progress() to completely non-blocking */
opal_progress_set_event_flag(OPAL_EVLOOP_NONBLOCK);
#endif
return OMPI_SUCCESS;
}
int mca_spml_yoda_enable(bool enable)
{
SPML_VERBOSE(50, "*** yoda ENABLED ****");
if (false == enable) {
return OSHMEM_SUCCESS;
}
OBJ_CONSTRUCT(&mca_spml_yoda.lock, opal_mutex_t);
/**
*If we get here this is the SPML who get selected for the run. We
* should get ownership for the put and get requests list, and
* initialize them with the size of our own requests.
*/
opal_free_list_init (&mca_spml_base_put_requests,
sizeof(mca_spml_yoda_put_request_t),
opal_cache_line_size,
OBJ_CLASS(mca_spml_yoda_put_request_t),
0,
opal_cache_line_size,
mca_spml_yoda.free_list_num,
mca_spml_yoda.free_list_max,
mca_spml_yoda.free_list_inc,
NULL, 0, NULL, NULL, NULL);
opal_free_list_init (&mca_spml_base_get_requests,
sizeof(mca_spml_yoda_get_request_t),
opal_cache_line_size,
OBJ_CLASS(mca_spml_yoda_get_request_t),
0,
opal_cache_line_size,
mca_spml_yoda.free_list_num,
mca_spml_yoda.free_list_max,
mca_spml_yoda.free_list_inc,
NULL, 0, NULL, NULL, NULL);
mca_spml_yoda.enabled = true;
/* The following line resolves the issue with BTL tcp and SPML yoda. In this case the
* atomic_basic_lock(root_rank) function may behave as DoS attack on root_rank, since
* all the procceses will do shmem_int_get from root_rank. These calls would go through
* bml active messaging and will trigger replays in libevent on root rank. If the flag
* OPAL_ENVLOOP_ONCE is not set then libevent will continously progress constantly
* incoming events thus causing root_rank to stuck in libevent loop.
*/
opal_progress_set_event_flag(OPAL_EVLOOP_NONBLOCK | OPAL_EVLOOP_ONCE);
#if OSHMEM_WAIT_COMPLETION_DEBUG == 1
condition_dbg_init();
#endif
return OSHMEM_SUCCESS;
}
int ompi_mpi_finalize(void)
{
int ret;
static int32_t finalize_has_already_started = 0;
opal_list_item_t *item;
struct timeval ompistart, ompistop;
ompi_rte_collective_t *coll;
ompi_proc_t** procs;
size_t nprocs;
/* Be a bit social if an erroneous program calls MPI_FINALIZE in
two different threads, otherwise we may deadlock in
ompi_comm_free() (or run into other nasty lions, tigers, or
bears) */
if (! opal_atomic_cmpset_32(&finalize_has_already_started, 0, 1)) {
/* Note that if we're already finalized, we cannot raise an
MPI exception. The best that we can do is write something
to stderr. */
char hostname[MAXHOSTNAMELEN];
pid_t pid = getpid();
gethostname(hostname, sizeof(hostname));
opal_show_help("help-mpi-runtime.txt",
"mpi_finalize:invoked_multiple_times",
true, hostname, pid);
return MPI_ERR_OTHER;
}
ompi_mpiext_fini();
/* Per MPI-2:4.8, we have to free MPI_COMM_SELF before doing
anything else in MPI_FINALIZE (to include setting up such that
MPI_FINALIZED will return true). */
if (NULL != ompi_mpi_comm_self.comm.c_keyhash) {
ompi_attr_delete_all(COMM_ATTR, &ompi_mpi_comm_self,
ompi_mpi_comm_self.comm.c_keyhash);
OBJ_RELEASE(ompi_mpi_comm_self.comm.c_keyhash);
ompi_mpi_comm_self.comm.c_keyhash = NULL;
}
/* Proceed with MPI_FINALIZE */
ompi_mpi_finalized = true;
/* As finalize is the last legal MPI call, we are allowed to force the release
* of the user buffer used for bsend, before going anywhere further.
*/
(void)mca_pml_base_bsend_detach(NULL, NULL);
nprocs = 0;
procs = ompi_proc_all(&nprocs);
MCA_PML_CALL(del_procs(procs, nprocs));
free(procs);
#if OMPI_ENABLE_PROGRESS_THREADS == 0
opal_progress_set_event_flag(OPAL_EVLOOP_ONCE | OPAL_EVLOOP_NONBLOCK);
#endif
/* Redo ORTE calling opal_progress_event_users_increment() during
MPI lifetime, to get better latency when not using TCP */
opal_progress_event_users_increment();
/* check to see if we want timing information */
if (ompi_enable_timing != 0 && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistart, NULL);
}
/* NOTE: MPI-2.1 requires that MPI_FINALIZE is "collective" across
*all* connected processes. This only means that all processes
have to call it. It does *not* mean that all connected
processes need to synchronize (either directly or indirectly).
For example, it is quite easy to construct complicated
scenarios where one job is "connected" to another job via
transitivity, but have no direct knowledge of each other.
Consider the following case: job A spawns job B, and job B
later spawns job C. A "connectedness" graph looks something
like this:
A <--> B <--> C
So what are we *supposed* to do in this case? If job A is
still connected to B when it calls FINALIZE, should it block
until jobs B and C also call FINALIZE?
After lengthy discussions many times over the course of this
project, the issue was finally decided at the Louisville Feb
2009 meeting: no.
Rationale:
- "Collective" does not mean synchronizing. It only means that
every process call it. Hence, in this scenario, every
process in A, B, and C must call FINALIZE.
- KEY POINT: if A calls FINALIZE, then it is erroneous for B or
C to try to communicate with A again.
- Hence, OMPI is *correct* to only effect a barrier across each
jobs' MPI_COMM_WORLD before exiting. Specifically, if A
calls FINALIZE long before B or C, it's *correct* if A exits
at any time (and doesn't notify B or C that it is exiting).
- Arguably, if B or C do try to communicate with the now-gone
A, OMPI should try to print a nice error ("you tried to
communicate with a job that is already gone...") instead of
segv or other Badness. However, that is an *extremely*
difficult problem -- sure, it's easy for A to tell B that it
is finalizing, but how can A tell C? A doesn't even know
about C. You'd need to construct a "connected" graph in a
distributed fashion, which is fraught with race conditions,
etc.
Hence, our conclusion is: OMPI is *correct* in its current
behavior (of only doing a barrier across its own COMM_WORLD)
before exiting. Any problems that occur are as a result of
erroneous MPI applications. We *could* tighten up the erroneous
cases and ensure that we print nice error messages / don't
crash, but that is such a difficult problem that we decided we
have many other, much higher priority issues to handle that deal
with non-erroneous cases. */
/* wait for everyone to reach this point
This is a grpcomm barrier instead of an MPI barrier because an
MPI barrier doesn't ensure that all messages have been transmitted
before exiting, so the possibility of a stranded message exists.
*/
coll = OBJ_NEW(ompi_rte_collective_t);
coll->id = ompi_process_info.peer_fini_barrier;
coll->active = true;
if (OMPI_SUCCESS != (ret = ompi_rte_barrier(coll))) {
OMPI_ERROR_LOG(ret);
return ret;
}
/* wait for barrier to complete */
OMPI_LAZY_WAIT_FOR_COMPLETION(coll->active);
OBJ_RELEASE(coll);
/* check for timing request - get stop time and report elapsed
time if so */
if (ompi_enable_timing && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_finalize[%ld]: time to execute barrier %ld usec",
(long)OMPI_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
}
/*
* Shutdown the Checkpoint/Restart Mech.
*/
if (OMPI_SUCCESS != (ret = ompi_cr_finalize())) {
OMPI_ERROR_LOG(ret);
}
/* Shut down any bindings-specific issues: C++, F77, F90 */
/* Remove all memory associated by MPI_REGISTER_DATAREP (per
MPI-2:9.5.3, there is no way for an MPI application to
*un*register datareps, but we don't want the OMPI layer causing
memory leaks). */
while (NULL != (item = opal_list_remove_first(&ompi_registered_datareps))) {
OBJ_RELEASE(item);
}
OBJ_DESTRUCT(&ompi_registered_datareps);
/* Remove all F90 types from the hash tables. As the OBJ_DESTRUCT will
* call a special destructor able to release predefined types, we can
* simply call the OBJ_DESTRUCT on the hash table and all memory will
* be correctly released.
*/
OBJ_DESTRUCT( &ompi_mpi_f90_integer_hashtable );
OBJ_DESTRUCT( &ompi_mpi_f90_real_hashtable );
OBJ_DESTRUCT( &ompi_mpi_f90_complex_hashtable );
/* Free communication objects */
/* free file resources */
if (OMPI_SUCCESS != (ret = ompi_file_finalize())) {
return ret;
}
/* free window resources */
if (OMPI_SUCCESS != (ret = ompi_win_finalize())) {
return ret;
}
if (OMPI_SUCCESS != (ret = ompi_osc_base_finalize())) {
return ret;
}
/* free pml resource */
if(OMPI_SUCCESS != (ret = mca_pml_base_finalize())) {
return ret;
}
/* free communicator resources */
if (OMPI_SUCCESS != (ret = ompi_comm_finalize())) {
return ret;
}
/* free requests */
if (OMPI_SUCCESS != (ret = ompi_request_finalize())) {
return ret;
}
if (OMPI_SUCCESS != (ret = ompi_message_finalize())) {
return ret;
}
/* If requested, print out a list of memory allocated by ALLOC_MEM
but not freed by FREE_MEM */
if (0 != ompi_debug_show_mpi_alloc_mem_leaks) {
mca_mpool_base_tree_print();
}
/* Now that all MPI objects dealing with communications are gone,
shut down MCA types having to do with communications */
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_pml_base_framework) ) ) {
OMPI_ERROR_LOG(ret);
return ret;
}
/* shut down buffered send code */
mca_pml_base_bsend_fini();
#if OPAL_ENABLE_FT_CR == 1
/*
* Shutdown the CRCP Framework, must happen after PML shutdown
*/
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_crcp_base_framework) ) ) {
OMPI_ERROR_LOG(ret);
return ret;
}
#endif
/* Free secondary resources */
/* free attr resources */
if (OMPI_SUCCESS != (ret = ompi_attr_finalize())) {
return ret;
}
/* free group resources */
if (OMPI_SUCCESS != (ret = ompi_group_finalize())) {
return ret;
}
/* free proc resources */
if ( OMPI_SUCCESS != (ret = ompi_proc_finalize())) {
return ret;
}
/* finalize the pubsub functions */
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_pubsub_base_framework) ) ) {
return ret;
}
/* finalize the DPM framework */
if ( OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_dpm_base_framework))) {
return ret;
}
/* free internal error resources */
if (OMPI_SUCCESS != (ret = ompi_errcode_intern_finalize())) {
return ret;
}
/* free error code resources */
if (OMPI_SUCCESS != (ret = ompi_mpi_errcode_finalize())) {
return ret;
}
/* free errhandler resources */
if (OMPI_SUCCESS != (ret = ompi_errhandler_finalize())) {
return ret;
}
/* Free all other resources */
/* free op resources */
if (OMPI_SUCCESS != (ret = ompi_op_finalize())) {
return ret;
}
/* free ddt resources */
if (OMPI_SUCCESS != (ret = ompi_datatype_finalize())) {
return ret;
}
/* free info resources */
if (OMPI_SUCCESS != (ret = ompi_info_finalize())) {
return ret;
}
/* Close down MCA modules */
/* io is opened lazily, so it's only necessary to close it if it
was actually opened */
if (0 < ompi_io_base_framework.framework_refcnt) {
/* May have been "opened" multiple times. We want it closed now */
ompi_io_base_framework.framework_refcnt = 1;
if (OMPI_SUCCESS != mca_base_framework_close(&ompi_io_base_framework)) {
return ret;
}
}
(void) mca_base_framework_close(&ompi_topo_base_framework);
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_osc_base_framework))) {
return ret;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_coll_base_framework))) {
return ret;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_bml_base_framework))) {
return ret;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_mpool_base_framework))) {
return ret;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_rcache_base_framework))) {
return ret;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_allocator_base_framework))) {
return ret;
}
if (NULL != ompi_mpi_main_thread) {
OBJ_RELEASE(ompi_mpi_main_thread);
ompi_mpi_main_thread = NULL;
}
/* Leave the RTE */
if (OMPI_SUCCESS != (ret = ompi_rte_finalize())) {
return ret;
}
/* now close the rte framework */
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_rte_base_framework) ) ) {
OMPI_ERROR_LOG(ret);
return ret;
}
if (OPAL_SUCCESS != (ret = opal_finalize_util())) {
return ret;
}
/* All done */
return MPI_SUCCESS;
}
int orte_daemon(int argc, char *argv[])
{
int ret = 0;
opal_cmd_line_t *cmd_line = NULL;
char *rml_uri;
int i;
opal_buffer_t *buffer;
char hostname[100];
char *tmp_env_var = NULL;
/* initialize the globals */
memset(&orted_globals, 0, sizeof(orted_globals));
/* initialize the singleton died pipe to an illegal value so we can detect it was set */
orted_globals.singleton_died_pipe = -1;
/* init the failure orted vpid to an invalid value */
orted_globals.fail = ORTE_VPID_INVALID;
/* setup to check common command line options that just report and die */
cmd_line = OBJ_NEW(opal_cmd_line_t);
if (OPAL_SUCCESS != opal_cmd_line_create(cmd_line, orte_cmd_line_opts)) {
OBJ_RELEASE(cmd_line);
exit(1);
}
mca_base_cmd_line_setup(cmd_line);
if (ORTE_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false,
argc, argv))) {
char *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
fprintf(stderr, "Usage: %s [OPTION]...\n%s\n", argv[0], args);
free(args);
OBJ_RELEASE(cmd_line);
return ret;
}
/*
* Since this process can now handle MCA/GMCA parameters, make sure to
* process them.
*/
mca_base_cmd_line_process_args(cmd_line, &environ, &environ);
/* Ensure that enough of OPAL is setup for us to be able to run */
/*
* NOTE: (JJH)
* We need to allow 'mca_base_cmd_line_process_args()' to process command
* line arguments *before* calling opal_init_util() since the command
* line could contain MCA parameters that affect the way opal_init_util()
* functions. AMCA parameters are one such option normally received on the
* command line that affect the way opal_init_util() behaves.
* It is "safe" to call mca_base_cmd_line_process_args() before
* opal_init_util() since mca_base_cmd_line_process_args() does *not*
* depend upon opal_init_util() functionality.
*/
if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
exit(1);
}
/* save the environment for launch purposes. This MUST be
* done so that we can pass it to any local procs we
* spawn - otherwise, those local procs won't see any
* non-MCA envars that were set in the enviro when the
* orted was executed - e.g., by .csh
*/
orte_launch_environ = opal_argv_copy(environ);
/* purge any ess flag set in the environ when we were launched */
opal_unsetenv("OMPI_MCA_ess", &orte_launch_environ);
/* if orte_daemon_debug is set, let someone know we are alive right
* away just in case we have a problem along the way
*/
if (orted_globals.debug) {
gethostname(hostname, 100);
fprintf(stderr, "Daemon was launched on %s - beginning to initialize\n", hostname);
}
/* check for help request */
if (orted_globals.help) {
char *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
orte_show_help("help-orted.txt", "orted:usage", false,
argv[0], args);
free(args);
return 1;
}
#if defined(HAVE_SETSID) && !defined(__WINDOWS__)
/* see if we were directed to separate from current session */
if (orted_globals.set_sid) {
setsid();
}
#endif /* !defined(__WINDOWS__) */
/* see if they want us to spin until they can connect a debugger to us */
i=0;
while (orted_spin_flag) {
i++;
if (1000 < i) i=0;
}
#if OPAL_ENABLE_FT_CR == 1
/* Mark as a tool program */
tmp_env_var = mca_base_param_env_var("opal_cr_is_tool");
opal_setenv(tmp_env_var,
"1",
true, &environ);
free(tmp_env_var);
#endif
tmp_env_var = NULL; /* Silence compiler warning */
/* if mapreduce set, flag it */
if (orted_globals.mapreduce) {
orte_map_reduce = true;
}
/* Set the flag telling OpenRTE that I am NOT a
* singleton, but am "infrastructure" - prevents setting
* up incorrect infrastructure that only a singleton would
* require.
*/
if (orted_globals.hnp) {
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
ORTE_ERROR_LOG(ret);
return ret;
}
} else {
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_DAEMON))) {
ORTE_ERROR_LOG(ret);
return ret;
}
}
/* finalize the OPAL utils. As they are opened again from orte_init->opal_init
* we continue to have a reference count on them. So we have to finalize them twice...
*/
opal_finalize_util();
if ((int)ORTE_VPID_INVALID != orted_globals.fail) {
orted_globals.abort=false;
/* some vpid was ordered to fail. The value can be positive
* or negative, depending upon the desired method for failure,
* so need to check both here
*/
if (0 > orted_globals.fail) {
orted_globals.fail = -1*orted_globals.fail;
orted_globals.abort = true;
}
/* are we the specified vpid? */
if ((int)ORTE_PROC_MY_NAME->vpid == orted_globals.fail) {
/* if the user specified we delay, then setup a timer
* and have it kill us
*/
if (0 < orted_globals.fail_delay) {
ORTE_TIMER_EVENT(orted_globals.fail_delay, 0, shutdown_callback, ORTE_SYS_PRI);
} else {
opal_output(0, "%s is executing clean %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
orted_globals.abort ? "abort" : "abnormal termination");
/* do -not- call finalize as this will send a message to the HNP
* indicating clean termination! Instead, just forcibly cleanup
* the local session_dir tree and exit
*/
orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
/* if we were ordered to abort, do so */
if (orted_globals.abort) {
abort();
}
/* otherwise, return with non-zero status */
ret = ORTE_ERROR_DEFAULT_EXIT_CODE;
goto DONE;
}
}
}
/* detach from controlling terminal
* otherwise, remain attached so output can get to us
*/
if(!orte_debug_flag &&
!orte_debug_daemons_flag &&
orted_globals.daemonize) {
opal_daemon_init(NULL);
}
/* insert our contact info into our process_info struct so we
* have it for later use and set the local daemon field to our name
*/
orte_process_info.my_daemon_uri = orte_rml.get_contact_info();
ORTE_PROC_MY_DAEMON->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_DAEMON->vpid = ORTE_PROC_MY_NAME->vpid;
/* if I am also the hnp, then update that contact info field too */
if (ORTE_PROC_IS_HNP) {
orte_process_info.my_hnp_uri = orte_rml.get_contact_info();
ORTE_PROC_MY_HNP->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_HNP->vpid = ORTE_PROC_MY_NAME->vpid;
}
/* setup the primary daemon command receive function */
ret = orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
ORTE_RML_PERSISTENT, orte_daemon_recv, NULL);
if (ret != ORTE_SUCCESS && ret != ORTE_ERR_NOT_IMPLEMENTED) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* output a message indicating we are alive, our name, and our pid
* for debugging purposes
*/
if (orte_debug_daemons_flag) {
fprintf(stderr, "Daemon %s checking in as pid %ld on host %s\n",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)orte_process_info.pid,
orte_process_info.nodename);
}
/* We actually do *not* want the orted to voluntarily yield() the
processor more than necessary. The orted already blocks when
it is doing nothing, so it doesn't use any more CPU cycles than
it should; but when it *is* doing something, we do not want it
to be unnecessarily delayed because it voluntarily yielded the
processor in the middle of its work.
For example: when a message arrives at the orted, we want the
OS to wake up the orted in a timely fashion (which most OS's
seem good about doing) and then we want the orted to process
the message as fast as possible. If the orted yields and lets
aggressive MPI applications get the processor back, it may be a
long time before the OS schedules the orted to run again
(particularly if there is no IO event to wake it up). Hence,
routed OOB messages (for example) may be significantly delayed
before being delivered to MPI processes, which can be
problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
require OOB messages for wireup, etc.). */
opal_progress_set_yield_when_idle(false);
/* Change the default behavior of libevent such that we want to
continually block rather than blocking for the default timeout
and then looping around the progress engine again. There
should be nothing in the orted that cannot block in libevent
until "something" happens (i.e., there's no need to keep
cycling through progress because the only things that should
happen will happen in libevent). This is a minor optimization,
but what the heck... :-) */
opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);
/* if requested, obtain and report a new process name and my uri to the indicated pipe */
if (orted_globals.uri_pipe > 0) {
orte_job_t *jdata;
orte_proc_t *proc;
orte_node_t *node;
orte_app_context_t *app;
char *tmp, *nptr, *sysinfo;
int32_t ljob;
/* setup the singleton's job */
jdata = OBJ_NEW(orte_job_t);
orte_plm_base_create_jobid(jdata);
ljob = ORTE_LOCAL_JOBID(jdata->jobid);
opal_pointer_array_set_item(orte_job_data, ljob, jdata);
/* must create a map for it (even though it has no
* info in it) so that the job info will be picked
* up in subsequent pidmaps or other daemons won't
* know how to route
*/
jdata->map = OBJ_NEW(orte_job_map_t);
/* setup an app_context for the singleton */
app = OBJ_NEW(orte_app_context_t);
app->app = strdup("singleton");
app->num_procs = 1;
opal_pointer_array_add(jdata->apps, app);
#if 0
/* run our local allocator to read the available
* allocation in case this singleton decides to
* comm_spawn other procs
*/
if (ORTE_SUCCESS != (ret = orte_ras.allocate(jdata))) {
ORTE_ERROR_LOG(ret);
/* don't quit as this would cause the singleton
* to hang!
*/
}
#endif
/* setup a proc object for the singleton - since we
* -must- be the HNP, and therefore we stored our
* node on the global node pool, and since the singleton
* -must- be on the same node as us, indicate that
*/
proc = OBJ_NEW(orte_proc_t);
proc->name.jobid = jdata->jobid;
proc->name.vpid = 0;
proc->alive = true;
proc->state = ORTE_PROC_STATE_RUNNING;
proc->app_idx = 0;
/* obviously, it is on my node */
node = (orte_node_t*)opal_pointer_array_get_item(orte_node_pool, 0);
proc->node = node;
OBJ_RETAIN(node); /* keep accounting straight */
opal_pointer_array_add(jdata->procs, proc);
jdata->num_procs = 1;
/* and obviously it is one of my local procs */
OBJ_RETAIN(proc);
opal_pointer_array_add(orte_local_children, proc);
jdata->num_local_procs = 1;
/* set the trivial */
proc->local_rank = 0;
proc->node_rank = 0;
proc->app_rank = 0;
proc->state = ORTE_PROC_STATE_RUNNING;
proc->alive = true;
proc->app_idx = 0;
proc->local_proc = true;
#if OPAL_HAVE_HWLOC
proc->bind_idx = 0;
#endif
/* the singleton will use the first three collectives
* for its modex/barriers
*/
orte_grpcomm_base.coll_id += 3;
/* need to setup a pidmap for it */
jdata->pmap = (opal_byte_object_t*)malloc(sizeof(opal_byte_object_t));
if (ORTE_SUCCESS != (ret = orte_util_encode_pidmap(jdata->pmap))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* if we don't yet have a daemon map, then we have to generate one
* to pass back to it
*/
if (NULL == orte_odls_globals.dmap) {
orte_odls_globals.dmap = (opal_byte_object_t*)malloc(sizeof(opal_byte_object_t));
/* construct a nodemap */
if (ORTE_SUCCESS != (ret = orte_util_encode_nodemap(orte_odls_globals.dmap))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
}
/* create a string that contains our uri + the singleton's name + sysinfo */
orte_util_convert_process_name_to_string(&nptr, &proc->name);
orte_util_convert_sysinfo_to_string(&sysinfo, orte_local_cpu_type, orte_local_cpu_model);
asprintf(&tmp, "%s[%s][%s]", orte_process_info.my_daemon_uri, nptr, sysinfo);
free(nptr);
free(sysinfo);
/* pass that info to the singleton */
#ifndef __WINDOWS__
write(orted_globals.uri_pipe, tmp, strlen(tmp)+1); /* need to add 1 to get the NULL */
#else
send(orted_globals.uri_pipe, tmp, strlen(tmp)+1, 0); /* need to add 1 to get the NULL */
#endif
/* cleanup */
free(tmp);
}
/* if we were given a pipe to monitor for singleton termination, set that up */
if (orted_globals.singleton_died_pipe > 0) {
/* register shutdown handler */
pipe_handler = (opal_event_t*)malloc(sizeof(opal_event_t));
opal_event_set(orte_event_base, pipe_handler,
orted_globals.singleton_died_pipe,
OPAL_EV_READ,
pipe_closed,
pipe_handler);
opal_event_add(pipe_handler, NULL);
}
/* If I have a parent, then save his contact info so
* any messages we send can flow thru him.
*/
mca_base_param_reg_string_name("orte", "parent_uri",
"URI for the parent if tree launch is enabled.",
true, false, NULL, &rml_uri);
if (NULL != rml_uri) {
orte_process_name_t parent;
/* set the contact info into the hash table */
if (ORTE_SUCCESS != (ret = orte_rml.set_contact_info(rml_uri))) {
ORTE_ERROR_LOG(ret);
free(rml_uri);
goto DONE;
}
ret = orte_rml_base_parse_uris(rml_uri, &parent, NULL );
if( ORTE_SUCCESS != ret ) {
ORTE_ERROR_LOG(ret);
free(rml_uri);
goto DONE;
}
free(rml_uri);
/* tell the routed module that we have a path
* back to the HNP
*/
if (ORTE_SUCCESS != (ret = orte_routed.update_route(ORTE_PROC_MY_HNP, &parent))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* set the lifeline to point to our parent so that we
* can handle the situation if that lifeline goes away
*/
if (ORTE_SUCCESS != (ret = orte_routed.set_lifeline(&parent))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
}
/* if we are not the HNP...the only time we will be an HNP
* is if we are launched by a singleton to provide support
* for it
*/
if (!ORTE_PROC_IS_HNP) {
/* send the information to the orted report-back point - this function
* will process the data, but also counts the number of
* orteds that reported back so the launch procedure can continue.
* We need to do this at the last possible second as the HNP
* can turn right around and begin issuing orders to us
*/
buffer = OBJ_NEW(opal_buffer_t);
/* insert our name for rollup purposes */
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, ORTE_PROC_MY_NAME, 1, ORTE_NAME))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
/* for now, always include our contact info, even if we are using
* static ports. Eventually, this will be removed
*/
rml_uri = orte_rml.get_contact_info();
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &rml_uri, 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
/* include our node name */
opal_dss.pack(buffer, &orte_process_info.nodename, 1, OPAL_STRING);
#if OPAL_HAVE_HWLOC
/* add the local topology */
if (NULL != opal_hwloc_topology &&
(1 == ORTE_PROC_MY_NAME->vpid || orte_hetero_nodes)) {
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &opal_hwloc_topology, 1, OPAL_HWLOC_TOPO))) {
ORTE_ERROR_LOG(ret);
}
}
#endif
if ((orte_static_ports || orte_use_common_port) && !orted_globals.tree_spawn) {
/* use the rollup collective to send our data to the HNP
* so we minimize the HNP bottleneck
*/
orte_grpcomm_collective_t *coll;
coll = OBJ_NEW(orte_grpcomm_collective_t);
/* get the list of contributors we need from the routed module */
orte_routed.get_routing_list(ORTE_GRPCOMM_COLL_PEERS, coll);
/* add the collective to our list */
opal_list_append(&orte_grpcomm_base.active_colls, &coll->super);
/* send the buffer to ourselves to start the collective */
if (0 > (ret = orte_rml.send_buffer_nb(ORTE_PROC_MY_NAME, buffer,
ORTE_RML_TAG_ROLLUP, 0,
rml_cbfunc, NULL))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
} else {
/* send directly to the HNP's callback */
if (0 > (ret = orte_rml.send_buffer_nb(ORTE_PROC_MY_HNP, buffer,
ORTE_RML_TAG_ORTED_CALLBACK, 0,
rml_cbfunc, NULL))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
}
}
if (orte_debug_daemons_flag) {
opal_output(0, "%s orted: up and running - waiting for commands!", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
}
/* loop the event lib until an exit event is detected */
while (orte_event_base_active) {
opal_event_loop(orte_event_base, OPAL_EVLOOP_ONCE);
}
/* ensure all local procs are dead */
orte_odls.kill_local_procs(NULL);
DONE:
/* update the exit status, in case it wasn't done */
ORTE_UPDATE_EXIT_STATUS(orte_exit_status);
/* cleanup and leave */
orte_finalize();
if (orte_debug_flag) {
fprintf(stderr, "exiting with status %d\n", orte_exit_status);
}
exit(orte_exit_status);
}
int ompi_mpi_init(int argc, char **argv, int requested, int *provided)
{
int ret;
ompi_proc_t** procs;
size_t nprocs;
char *error = NULL;
struct timeval ompistart, ompistop;
bool rte_setup = false;
ompi_rte_collective_t *coll;
char *cmd=NULL, *av=NULL;
/* bitflag of the thread level support provided. To be used
* for the modex in order to work in heterogeneous environments. */
uint8_t threadlevel_bf;
/* Indicate that we have *started* MPI_INIT*. MPI_FINALIZE has
something sorta similar in a static local variable in
ompi_mpi_finalize(). */
ompi_mpi_init_started = true;
/* Setup enough to check get/set MCA params */
if (OPAL_SUCCESS != (ret = opal_init_util(&argc, &argv))) {
error = "ompi_mpi_init: opal_init_util failed";
goto error;
}
/* Register MCA variables */
if (OPAL_SUCCESS != (ret = ompi_register_mca_variables())) {
error = "ompi_mpi_init: ompi_register_mca_variables failed";
goto error;
}
if (OPAL_SUCCESS != (ret = opal_arch_set_fortran_logical_size(sizeof(ompi_fortran_logical_t)))) {
error = "ompi_mpi_init: opal_arch_set_fortran_logical_size failed";
goto error;
}
/* _After_ opal_init_util() but _before_ orte_init(), we need to
set an MCA param that tells libevent that it's ok to use any
mechanism in libevent that is available on this platform (e.g.,
epoll and friends). Per opal/event/event.s, we default to
select/poll -- but we know that MPI processes won't be using
pty's with the event engine, so it's ok to relax this
constraint and let any fd-monitoring mechanism be used. */
ret = mca_base_var_find("opal", "event", "*", "event_include");
if (ret >= 0) {
char *allvalue = "all";
/* We have to explicitly "set" the MCA param value here
because libevent initialization will re-register the MCA
param and therefore override the default. Setting the value
here puts the desired value ("all") in different storage
that is not overwritten if/when the MCA param is
re-registered. This is unless the user has specified a different
value for this MCA parameter. Make sure we check to see if the
default is specified before forcing "all" in case that is not what
the user desires. Note that we do *NOT* set this value as an
environment variable, just so that it won't be inherited by
any spawned processes and potentially cause unintented
side-effects with launching RTE tools... */
mca_base_var_set_value(ret, allvalue, 4, MCA_BASE_VAR_SOURCE_DEFAULT, NULL);
}
if (ompi_enable_timing && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistart, NULL);
}
/* if we were not externally started, then we need to setup
* some envars so the MPI_INFO_ENV can get the cmd name
* and argv (but only if the user supplied a non-NULL argv!), and
* the requested thread level
*/
if (NULL == getenv("OMPI_COMMAND") && NULL != argv && NULL != argv[0]) {
asprintf(&cmd, "OMPI_COMMAND=%s", argv[0]);
putenv(cmd);
}
if (NULL == getenv("OMPI_ARGV") && 1 < argc) {
char *tmp;
tmp = opal_argv_join(&argv[1], ' ');
asprintf(&av, "OMPI_ARGV=%s", tmp);
free(tmp);
putenv(av);
}
/* open the rte framework */
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_rte_base_framework, 0))) {
error = "ompi_rte_base_open() failed";
goto error;
}
/* no select is required as this is a static framework */
/* Setup RTE - note that we are an MPI process */
if (OMPI_SUCCESS != (ret = ompi_rte_init(NULL, NULL))) {
error = "ompi_mpi_init: ompi_rte_init failed";
goto error;
}
rte_setup = true;
/* check for timing request - get stop time and report elapsed time if so */
if (ompi_enable_timing && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init [%ld]: time from start to completion of rte_init %ld usec",
(long)OMPI_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
#if OPAL_HAVE_HWLOC
/* if hwloc is available but didn't get setup for some
* reason, do so now
*/
if (NULL == opal_hwloc_topology) {
if (OPAL_SUCCESS != (ret = opal_hwloc_base_get_topology())) {
error = "Topology init";
goto error;
}
}
#endif
/* Register the default errhandler callback - RTE will ignore if it
* doesn't support this capability
*/
ompi_rte_register_errhandler(ompi_errhandler_runtime_callback,
OMPI_RTE_ERRHANDLER_LAST);
/* Figure out the final MPI thread levels. If we were not
compiled for support for MPI threads, then don't allow
MPI_THREAD_MULTIPLE. Set this stuff up here early in the
process so that other components can make decisions based on
this value. */
ompi_mpi_thread_level(requested, provided);
/* determine the bitflag belonging to the threadlevel_support provided */
memset ( &threadlevel_bf, 0, sizeof(uint8_t));
OMPI_THREADLEVEL_SET_BITFLAG ( ompi_mpi_thread_provided, threadlevel_bf );
/* add this bitflag to the modex */
if ( OMPI_SUCCESS != (ret = ompi_modex_send_string("MPI_THREAD_LEVEL", &threadlevel_bf, sizeof(uint8_t)))) {
error = "ompi_mpi_init: modex send thread level";
goto error;
}
/* initialize datatypes. This step should be done early as it will
* create the local convertor and local arch used in the proc
* init.
*/
if (OMPI_SUCCESS != (ret = ompi_datatype_init())) {
error = "ompi_datatype_init() failed";
goto error;
}
/* Initialize OMPI procs */
if (OMPI_SUCCESS != (ret = ompi_proc_init())) {
error = "mca_proc_init() failed";
goto error;
}
/* Initialize the op framework. This has to be done *after*
ddt_init, but befor mca_coll_base_open, since some collective
modules (e.g., the hierarchical coll component) may need ops in
their query function. */
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_op_base_framework, 0))) {
error = "ompi_op_base_open() failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = ompi_op_base_find_available(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_THREAD_MULTIPLE))) {
error = "ompi_op_base_find_available() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = ompi_op_init())) {
error = "ompi_op_init() failed";
goto error;
}
/* Open up MPI-related MCA components */
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_allocator_base_framework, 0))) {
error = "mca_allocator_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_rcache_base_framework, 0))) {
error = "mca_rcache_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_mpool_base_framework, 0))) {
error = "mca_mpool_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_bml_base_framework, 0))) {
error = "mca_bml_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_pml_base_framework, 0))) {
error = "mca_pml_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_coll_base_framework, 0))) {
error = "mca_coll_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_osc_base_framework, 0))) {
error = "ompi_osc_base_open() failed";
goto error;
}
#if OPAL_ENABLE_FT_CR == 1
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_crcp_base_framework, 0))) {
error = "ompi_crcp_base_open() failed";
goto error;
}
#endif
/* In order to reduce the common case for MPI apps (where they
don't use MPI-2 IO or MPI-1 topology functions), the io and
topo frameworks are initialized lazily, at the first use of
relevant functions (e.g., MPI_FILE_*, MPI_CART_*, MPI_GRAPH_*),
so they are not opened here. */
/* Select which MPI components to use */
if (OMPI_SUCCESS !=
(ret = mca_mpool_base_init(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_THREAD_MULTIPLE))) {
error = "mca_mpool_base_init() failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = mca_pml_base_select(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_THREAD_MULTIPLE))) {
error = "mca_pml_base_select() failed";
goto error;
}
/* check for timing request - get stop time and report elapsed time if so */
if (ompi_enable_timing && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time from completion of rte_init to modex %ld usec",
(long)OMPI_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
/* exchange connection info - this function also acts as a barrier
* as it will not return until the exchange is complete
*/
coll = OBJ_NEW(ompi_rte_collective_t);
coll->id = ompi_process_info.peer_modex;
coll->active = true;
if (OMPI_SUCCESS != (ret = ompi_rte_modex(coll))) {
error = "rte_modex failed";
goto error;
}
/* wait for modex to complete - this may be moved anywhere in mpi_init
* so long as it occurs prior to calling a function that needs
* the modex info!
*/
OMPI_WAIT_FOR_COMPLETION(coll->active);
OBJ_RELEASE(coll);
if (ompi_enable_timing && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time to execute modex %ld usec",
(long)OMPI_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
/* select buffered send allocator component to be used */
if( OMPI_SUCCESS !=
(ret = mca_pml_base_bsend_init(OMPI_ENABLE_THREAD_MULTIPLE))) {
error = "mca_pml_base_bsend_init() failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = mca_coll_base_find_available(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_THREAD_MULTIPLE))) {
error = "mca_coll_base_find_available() failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = ompi_osc_base_find_available(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_THREAD_MULTIPLE))) {
error = "ompi_osc_base_find_available() failed";
goto error;
}
#if OPAL_ENABLE_FT_CR == 1
if (OMPI_SUCCESS != (ret = ompi_crcp_base_select() ) ) {
error = "ompi_crcp_base_select() failed";
goto error;
}
#endif
/* io and topo components are not selected here -- see comment
above about the io and topo frameworks being loaded lazily */
/* Initialize each MPI handle subsystem */
/* initialize requests */
if (OMPI_SUCCESS != (ret = ompi_request_init())) {
error = "ompi_request_init() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = ompi_message_init())) {
error = "ompi_message_init() failed";
goto error;
}
/* initialize info */
if (OMPI_SUCCESS != (ret = ompi_info_init())) {
error = "ompi_info_init() failed";
goto error;
}
/* initialize error handlers */
if (OMPI_SUCCESS != (ret = ompi_errhandler_init())) {
error = "ompi_errhandler_init() failed";
goto error;
}
/* initialize error codes */
if (OMPI_SUCCESS != (ret = ompi_mpi_errcode_init())) {
error = "ompi_mpi_errcode_init() failed";
goto error;
}
/* initialize internal error codes */
if (OMPI_SUCCESS != (ret = ompi_errcode_intern_init())) {
error = "ompi_errcode_intern_init() failed";
goto error;
}
/* initialize groups */
if (OMPI_SUCCESS != (ret = ompi_group_init())) {
error = "ompi_group_init() failed";
goto error;
}
/* initialize communicators */
if (OMPI_SUCCESS != (ret = ompi_comm_init())) {
error = "ompi_comm_init() failed";
goto error;
}
/* initialize file handles */
if (OMPI_SUCCESS != (ret = ompi_file_init())) {
error = "ompi_file_init() failed";
goto error;
}
/* initialize windows */
if (OMPI_SUCCESS != (ret = ompi_win_init())) {
error = "ompi_win_init() failed";
goto error;
}
/* initialize attribute meta-data structure for comm/win/dtype */
if (OMPI_SUCCESS != (ret = ompi_attr_init())) {
error = "ompi_attr_init() failed";
goto error;
}
/* identify the architectures of remote procs and setup
* their datatype convertors, if required
*/
if (OMPI_SUCCESS != (ret = ompi_proc_complete_init())) {
error = "ompi_proc_complete_init failed";
goto error;
}
/* If thread support was enabled, then setup OPAL to allow for
them. */
if ((OMPI_ENABLE_PROGRESS_THREADS == 1) ||
(*provided != MPI_THREAD_SINGLE)) {
opal_set_using_threads(true);
}
/* start PML/BTL's */
ret = MCA_PML_CALL(enable(true));
if( OMPI_SUCCESS != ret ) {
error = "PML control failed";
goto error;
}
/* add all ompi_proc_t's to PML */
if (NULL == (procs = ompi_proc_world(&nprocs))) {
error = "ompi_proc_world() failed";
goto error;
}
ret = MCA_PML_CALL(add_procs(procs, nprocs));
free(procs);
/* If we got "unreachable", then print a specific error message.
Otherwise, if we got some other failure, fall through to print
a generic message. */
if (OMPI_ERR_UNREACH == ret) {
opal_show_help("help-mpi-runtime",
"mpi_init:startup:pml-add-procs-fail", true);
error = NULL;
goto error;
} else if (OMPI_SUCCESS != ret) {
error = "PML add procs failed";
goto error;
}
MCA_PML_CALL(add_comm(&ompi_mpi_comm_world.comm));
MCA_PML_CALL(add_comm(&ompi_mpi_comm_self.comm));
/*
* Dump all MCA parameters if requested
*/
if (ompi_mpi_show_mca_params) {
ompi_show_all_mca_params(ompi_mpi_comm_world.comm.c_my_rank,
nprocs,
ompi_process_info.nodename);
}
/* Do we need to wait for a debugger? */
ompi_rte_wait_for_debugger();
/* check for timing request - get stop time and report elapsed
time if so, then start the clock again */
if (ompi_enable_timing && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time from modex to first barrier %ld usec",
(long)OMPI_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
/* wait for everyone to reach this point */
coll = OBJ_NEW(ompi_rte_collective_t);
coll->id = ompi_process_info.peer_init_barrier;
coll->active = true;
if (OMPI_SUCCESS != (ret = ompi_rte_barrier(coll))) {
error = "rte_barrier failed";
goto error;
}
/* wait for barrier to complete */
OMPI_WAIT_FOR_COMPLETION(coll->active);
OBJ_RELEASE(coll);
/* check for timing request - get stop time and report elapsed
time if so, then start the clock again */
if (ompi_enable_timing && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time to execute barrier %ld usec",
(long)OMPI_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
#if OMPI_ENABLE_PROGRESS_THREADS == 0
/* Start setting up the event engine for MPI operations. Don't
block in the event library, so that communications don't take
forever between procs in the dynamic code. This will increase
CPU utilization for the remainder of MPI_INIT when we are
blocking on RTE-level events, but may greatly reduce non-TCP
latency. */
opal_progress_set_event_flag(OPAL_EVLOOP_NONBLOCK);
#endif
/* wire up the mpi interface, if requested. Do this after the
non-block switch for non-TCP performance. Do before the
polling change as anyone with a complex wire-up is going to be
using the oob. */
if (OMPI_SUCCESS != (ret = ompi_init_preconnect_mpi())) {
error = "ompi_mpi_do_preconnect_all() failed";
goto error;
}
/* Setup the publish/subscribe (PUBSUB) framework */
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_pubsub_base_framework, 0))) {
error = "mca_pubsub_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = ompi_pubsub_base_select())) {
error = "ompi_pubsub_base_select() failed";
goto error;
}
/* Setup the dynamic process management (DPM) framework */
if (OMPI_SUCCESS != (ret = mca_base_framework_open(&ompi_dpm_base_framework, 0))) {
error = "ompi_dpm_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = ompi_dpm_base_select())) {
error = "ompi_dpm_base_select() failed";
goto error;
}
/* Determine the overall threadlevel support of all processes
in MPI_COMM_WORLD. This has to be done before calling
coll_base_comm_select, since some of the collective components
e.g. hierarch, might create subcommunicators. The threadlevel
requested by all processes is required in order to know
which cid allocation algorithm can be used. */
if ( OMPI_SUCCESS !=
( ret = ompi_comm_cid_init ())) {
error = "ompi_mpi_init: ompi_comm_cid_init failed";
goto error;
}
/* Init coll for the comms. This has to be after dpm_base_select,
(since dpm.mark_dyncomm is not set in the communicator creation
function else), but before dpm.dyncom_init, since this function
might require collective for the CID allocation. */
if (OMPI_SUCCESS !=
(ret = mca_coll_base_comm_select(MPI_COMM_WORLD))) {
error = "mca_coll_base_comm_select(MPI_COMM_WORLD) failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = mca_coll_base_comm_select(MPI_COMM_SELF))) {
error = "mca_coll_base_comm_select(MPI_COMM_SELF) failed";
goto error;
}
/* Check whether we have been spawned or not. We introduce that
at the very end, since we need collectives, datatypes, ptls
etc. up and running here.... */
if (OMPI_SUCCESS != (ret = ompi_dpm.dyn_init())) {
error = "ompi_comm_dyn_init() failed";
goto error;
}
/*
* Startup the Checkpoint/Restart Mech.
* Note: Always do this so tools don't hang when
* in a non-checkpointable build
*/
if (OMPI_SUCCESS != (ret = ompi_cr_init())) {
error = "ompi_cr_init";
goto error;
}
/* Undo OPAL calling opal_progress_event_users_increment() during
opal_init, to get better latency when not using TCP. Do
this *after* dyn_init, as dyn init uses lots of RTE
communication and we don't want to hinder the performance of
that code. */
opal_progress_event_users_decrement();
/* see if yield_when_idle was specified - if so, use it */
opal_progress_set_yield_when_idle(ompi_mpi_yield_when_idle);
/* negative value means use default - just don't do anything */
if (ompi_mpi_event_tick_rate >= 0) {
opal_progress_set_event_poll_rate(ompi_mpi_event_tick_rate);
}
/* At this point, we are fully configured and in MPI mode. Any
communication calls here will work exactly like they would in
the user's code. Setup the connections between procs and warm
them up with simple sends, if requested */
if (OMPI_SUCCESS != (ret = ompi_mpiext_init())) {
error = "ompi_mpiext_init";
goto error;
}
/* Fall through */
error:
if (ret != OMPI_SUCCESS) {
/* Only print a message if one was not already printed */
if (NULL != error) {
const char *err_msg = opal_strerror(ret);
/* If RTE was not setup yet, don't use opal_show_help */
if (rte_setup) {
opal_show_help("help-mpi-runtime",
"mpi_init:startup:internal-failure", true,
"MPI_INIT", "MPI_INIT", error, err_msg, ret);
} else {
opal_show_help("help-mpi-runtime",
"mpi_init:startup:internal-failure", true,
"MPI_INIT", "MPI_INIT", error, err_msg, ret);
}
}
return ret;
}
/* Initialize the registered datarep list to be empty */
OBJ_CONSTRUCT(&ompi_registered_datareps, opal_list_t);
/* Initialize the arrays used to store the F90 types returned by the
* MPI_Type_create_f90_XXX functions.
*/
OBJ_CONSTRUCT( &ompi_mpi_f90_integer_hashtable, opal_hash_table_t);
opal_hash_table_init(&ompi_mpi_f90_integer_hashtable, 16 /* why not? */);
OBJ_CONSTRUCT( &ompi_mpi_f90_real_hashtable, opal_hash_table_t);
opal_hash_table_init(&ompi_mpi_f90_real_hashtable, FLT_MAX_10_EXP);
OBJ_CONSTRUCT( &ompi_mpi_f90_complex_hashtable, opal_hash_table_t);
opal_hash_table_init(&ompi_mpi_f90_complex_hashtable, FLT_MAX_10_EXP);
/* All done. Wasn't that simple? */
ompi_mpi_initialized = true;
/* check for timing request - get stop time and report elapsed time if so */
if (ompi_enable_timing && 0 == OMPI_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time from barrier to complete mpi_init %ld usec",
(long)OMPI_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
}
return MPI_SUCCESS;
}
int orte_daemon(int argc, char *argv[])
{
int ret = 0;
opal_cmd_line_t *cmd_line = NULL;
char *rml_uri;
int i;
opal_buffer_t *buffer;
char hostname[100];
#if OPAL_ENABLE_FT_CR == 1
char *tmp_env_var = NULL;
#endif
/* initialize the globals */
memset(&orted_globals, 0, sizeof(orted_globals));
/* initialize the singleton died pipe to an illegal value so we can detect it was set */
orted_globals.singleton_died_pipe = -1;
/* init the failure orted vpid to an invalid value */
orted_globals.fail = ORTE_VPID_INVALID;
/* setup to check common command line options that just report and die */
cmd_line = OBJ_NEW(opal_cmd_line_t);
if (OPAL_SUCCESS != opal_cmd_line_create(cmd_line, orte_cmd_line_opts)) {
OBJ_RELEASE(cmd_line);
exit(1);
}
mca_base_cmd_line_setup(cmd_line);
if (ORTE_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false,
argc, argv))) {
char *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
fprintf(stderr, "Usage: %s [OPTION]...\n%s\n", argv[0], args);
free(args);
OBJ_RELEASE(cmd_line);
return ret;
}
/*
* Since this process can now handle MCA/GMCA parameters, make sure to
* process them.
*/
mca_base_cmd_line_process_args(cmd_line, &environ, &environ);
/* Ensure that enough of OPAL is setup for us to be able to run */
/*
* NOTE: (JJH)
* We need to allow 'mca_base_cmd_line_process_args()' to process command
* line arguments *before* calling opal_init_util() since the command
* line could contain MCA parameters that affect the way opal_init_util()
* functions. AMCA parameters are one such option normally received on the
* command line that affect the way opal_init_util() behaves.
* It is "safe" to call mca_base_cmd_line_process_args() before
* opal_init_util() since mca_base_cmd_line_process_args() does *not*
* depend upon opal_init_util() functionality.
*/
if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
exit(1);
}
/* save the environment for launch purposes. This MUST be
* done so that we can pass it to any local procs we
* spawn - otherwise, those local procs won't see any
* non-MCA envars that were set in the enviro when the
* orted was executed - e.g., by .csh
*/
orte_launch_environ = opal_argv_copy(environ);
/* purge any ess flag set in the environ when we were launched */
opal_unsetenv(OPAL_MCA_PREFIX"ess", &orte_launch_environ);
/* if orte_daemon_debug is set, let someone know we are alive right
* away just in case we have a problem along the way
*/
if (orted_globals.debug) {
gethostname(hostname, 100);
fprintf(stderr, "Daemon was launched on %s - beginning to initialize\n", hostname);
}
/* check for help request */
if (orted_globals.help) {
char *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
orte_show_help("help-orted.txt", "orted:usage", false,
argv[0], args);
free(args);
return 1;
}
#if defined(HAVE_SETSID)
/* see if we were directed to separate from current session */
if (orted_globals.set_sid) {
setsid();
}
#endif
/* see if they want us to spin until they can connect a debugger to us */
i=0;
while (orted_spin_flag) {
i++;
if (1000 < i) i=0;
}
#if OPAL_ENABLE_FT_CR == 1
/* Mark as a tool program */
(void) mca_base_var_env_name ("opal_cr_is_tool", &tmp_env_var);
opal_setenv(tmp_env_var,
"1",
true, &environ);
free(tmp_env_var);
#endif
/* if mapreduce set, flag it */
if (orted_globals.mapreduce) {
orte_map_reduce = true;
}
/* detach from controlling terminal
* otherwise, remain attached so output can get to us
*/
if(!orte_debug_flag &&
!orte_debug_daemons_flag &&
orted_globals.daemonize) {
opal_daemon_init(NULL);
}
/* Set the flag telling OpenRTE that I am NOT a
* singleton, but am "infrastructure" - prevents setting
* up incorrect infrastructure that only a singleton would
* require.
*/
if (orted_globals.hnp) {
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
ORTE_ERROR_LOG(ret);
return ret;
}
} else {
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_DAEMON))) {
ORTE_ERROR_LOG(ret);
return ret;
}
}
/* finalize the OPAL utils. As they are opened again from orte_init->opal_init
* we continue to have a reference count on them. So we have to finalize them twice...
*/
opal_finalize_util();
#if OPAL_HAVE_HWLOC
/* bind ourselves if so directed */
if (NULL != orte_daemon_cores) {
char **cores=NULL, tmp[128];
hwloc_obj_t pu;
hwloc_cpuset_t ours, pucpus, res;
int core;
/* could be a collection of comma-delimited ranges, so
* use our handy utility to parse it
*/
orte_util_parse_range_options(orte_daemon_cores, &cores);
if (NULL != cores) {
ours = hwloc_bitmap_alloc();
hwloc_bitmap_zero(ours);
pucpus = hwloc_bitmap_alloc();
res = hwloc_bitmap_alloc();
for (i=0; NULL != cores[i]; i++) {
core = strtoul(cores[i], NULL, 10);
if (NULL == (pu = opal_hwloc_base_get_pu(opal_hwloc_topology, core, OPAL_HWLOC_LOGICAL))) {
/* turn off the show help forwarding as we won't
* be able to cycle the event library to send
*/
orte_show_help_finalize();
/* the message will now come out locally */
orte_show_help("help-orted.txt", "orted:cannot-bind",
true, orte_process_info.nodename,
orte_daemon_cores);
ret = ORTE_ERR_NOT_SUPPORTED;
goto DONE;
}
hwloc_bitmap_and(pucpus, pu->online_cpuset, pu->allowed_cpuset);
hwloc_bitmap_or(res, ours, pucpus);
hwloc_bitmap_copy(ours, res);
}
/* if the result is all zeros, then don't bind */
if (!hwloc_bitmap_iszero(ours)) {
(void)hwloc_set_cpubind(opal_hwloc_topology, ours, 0);
if (opal_hwloc_report_bindings) {
opal_hwloc_base_cset2mapstr(tmp, sizeof(tmp), opal_hwloc_topology, ours);
opal_output(0, "Daemon %s is bound to cores %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), tmp);
}
}
/* cleanup */
hwloc_bitmap_free(ours);
hwloc_bitmap_free(pucpus);
hwloc_bitmap_free(res);
opal_argv_free(cores);
}
}
#endif
if ((int)ORTE_VPID_INVALID != orted_globals.fail) {
orted_globals.abort=false;
/* some vpid was ordered to fail. The value can be positive
* or negative, depending upon the desired method for failure,
* so need to check both here
*/
if (0 > orted_globals.fail) {
orted_globals.fail = -1*orted_globals.fail;
orted_globals.abort = true;
}
/* are we the specified vpid? */
if ((int)ORTE_PROC_MY_NAME->vpid == orted_globals.fail) {
/* if the user specified we delay, then setup a timer
* and have it kill us
*/
if (0 < orted_globals.fail_delay) {
ORTE_TIMER_EVENT(orted_globals.fail_delay, 0, shutdown_callback, ORTE_SYS_PRI);
} else {
opal_output(0, "%s is executing clean %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
orted_globals.abort ? "abort" : "abnormal termination");
/* do -not- call finalize as this will send a message to the HNP
* indicating clean termination! Instead, just forcibly cleanup
* the local session_dir tree and exit
*/
orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
/* if we were ordered to abort, do so */
if (orted_globals.abort) {
abort();
}
/* otherwise, return with non-zero status */
ret = ORTE_ERROR_DEFAULT_EXIT_CODE;
goto DONE;
}
}
}
/* insert our contact info into our process_info struct so we
* have it for later use and set the local daemon field to our name
*/
orte_process_info.my_daemon_uri = orte_rml.get_contact_info();
ORTE_PROC_MY_DAEMON->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_DAEMON->vpid = ORTE_PROC_MY_NAME->vpid;
/* if I am also the hnp, then update that contact info field too */
if (ORTE_PROC_IS_HNP) {
orte_process_info.my_hnp_uri = orte_rml.get_contact_info();
ORTE_PROC_MY_HNP->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_HNP->vpid = ORTE_PROC_MY_NAME->vpid;
}
/* setup the primary daemon command receive function */
orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
ORTE_RML_PERSISTENT, orte_daemon_recv, NULL);
/* output a message indicating we are alive, our name, and our pid
* for debugging purposes
*/
if (orte_debug_daemons_flag) {
fprintf(stderr, "Daemon %s checking in as pid %ld on host %s\n",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)orte_process_info.pid,
orte_process_info.nodename);
}
/* We actually do *not* want the orted to voluntarily yield() the
processor more than necessary. The orted already blocks when
it is doing nothing, so it doesn't use any more CPU cycles than
it should; but when it *is* doing something, we do not want it
to be unnecessarily delayed because it voluntarily yielded the
processor in the middle of its work.
For example: when a message arrives at the orted, we want the
OS to wake up the orted in a timely fashion (which most OS's
seem good about doing) and then we want the orted to process
the message as fast as possible. If the orted yields and lets
aggressive MPI applications get the processor back, it may be a
long time before the OS schedules the orted to run again
(particularly if there is no IO event to wake it up). Hence,
routed OOB messages (for example) may be significantly delayed
before being delivered to MPI processes, which can be
problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
require OOB messages for wireup, etc.). */
opal_progress_set_yield_when_idle(false);
/* Change the default behavior of libevent such that we want to
continually block rather than blocking for the default timeout
and then looping around the progress engine again. There
should be nothing in the orted that cannot block in libevent
until "something" happens (i.e., there's no need to keep
cycling through progress because the only things that should
happen will happen in libevent). This is a minor optimization,
but what the heck... :-) */
opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);
/* if requested, report my uri to the indicated pipe */
if (orted_globals.uri_pipe > 0) {
orte_job_t *jdata;
orte_proc_t *proc;
orte_node_t *node;
orte_app_context_t *app;
char *tmp, *nptr, *sysinfo;
int32_t ljob;
/* setup the singleton's job */
jdata = OBJ_NEW(orte_job_t);
orte_plm_base_create_jobid(jdata);
ljob = ORTE_LOCAL_JOBID(jdata->jobid);
opal_pointer_array_set_item(orte_job_data, ljob, jdata);
/* must create a map for it (even though it has no
* info in it) so that the job info will be picked
* up in subsequent pidmaps or other daemons won't
* know how to route
*/
jdata->map = OBJ_NEW(orte_job_map_t);
/* setup an app_context for the singleton */
app = OBJ_NEW(orte_app_context_t);
app->app = strdup("singleton");
app->num_procs = 1;
opal_pointer_array_add(jdata->apps, app);
/* setup a proc object for the singleton - since we
* -must- be the HNP, and therefore we stored our
* node on the global node pool, and since the singleton
* -must- be on the same node as us, indicate that
*/
proc = OBJ_NEW(orte_proc_t);
proc->name.jobid = jdata->jobid;
proc->name.vpid = 0;
ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_ALIVE);
proc->state = ORTE_PROC_STATE_RUNNING;
proc->app_idx = 0;
/* obviously, it is on my node */
node = (orte_node_t*)opal_pointer_array_get_item(orte_node_pool, 0);
proc->node = node;
OBJ_RETAIN(node); /* keep accounting straight */
opal_pointer_array_add(jdata->procs, proc);
jdata->num_procs = 1;
/* and it obviously is on the node */
OBJ_RETAIN(proc);
opal_pointer_array_add(node->procs, proc);
node->num_procs++;
/* and obviously it is one of my local procs */
OBJ_RETAIN(proc);
opal_pointer_array_add(orte_local_children, proc);
jdata->num_local_procs = 1;
/* set the trivial */
proc->local_rank = 0;
proc->node_rank = 0;
proc->app_rank = 0;
proc->state = ORTE_PROC_STATE_RUNNING;
proc->app_idx = 0;
ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_LOCAL);
/* create a string that contains our uri + sysinfo + PMIx server URI */
orte_util_convert_sysinfo_to_string(&sysinfo, orte_local_cpu_type, orte_local_cpu_model);
asprintf(&tmp, "%s[%s]%s", orte_process_info.my_daemon_uri, sysinfo, pmix_server_uri);
free(sysinfo);
/* pass that info to the singleton */
write(orted_globals.uri_pipe, tmp, strlen(tmp)+1); /* need to add 1 to get the NULL */
/* cleanup */
free(tmp);
/* since a singleton spawned us, we need to harvest
* any MCA params from the local environment so
* we can pass them along to any subsequent daemons
* we may start as the result of a comm_spawn
*/
for (i=0; NULL != environ[i]; i++) {
if (0 == strncmp(environ[i], OPAL_MCA_PREFIX, 9)) {
/* make a copy to manipulate */
tmp = strdup(environ[i]);
/* find the equal sign */
nptr = strchr(tmp, '=');
*nptr = '\0';
nptr++;
/* add the mca param to the orted cmd line */
opal_argv_append_nosize(&orted_cmd_line, "-"OPAL_MCA_CMD_LINE_ID);
opal_argv_append_nosize(&orted_cmd_line, &tmp[9]);
opal_argv_append_nosize(&orted_cmd_line, nptr);
free(tmp);
}
}
}
/* if we were given a pipe to monitor for singleton termination, set that up */
if (orted_globals.singleton_died_pipe > 0) {
/* register shutdown handler */
pipe_handler = (opal_event_t*)malloc(sizeof(opal_event_t));
opal_event_set(orte_event_base, pipe_handler,
orted_globals.singleton_died_pipe,
OPAL_EV_READ,
pipe_closed,
pipe_handler);
opal_event_add(pipe_handler, NULL);
}
/* If I have a parent, then save his contact info so
* any messages we send can flow thru him.
*/
orte_parent_uri = NULL;
(void) mca_base_var_register ("orte", "orte", NULL, "parent_uri",
"URI for the parent if tree launch is enabled.",
MCA_BASE_VAR_TYPE_STRING, NULL, 0,
MCA_BASE_VAR_FLAG_INTERNAL,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_CONSTANT,
&orte_parent_uri);
if (NULL != orte_parent_uri) {
orte_process_name_t parent;
/* set the contact info into the hash table */
orte_rml.set_contact_info(orte_parent_uri);
ret = orte_rml_base_parse_uris(orte_parent_uri, &parent, NULL);
if (ORTE_SUCCESS != ret) {
ORTE_ERROR_LOG(ret);
free (orte_parent_uri);
orte_parent_uri = NULL;
goto DONE;
}
/* don't need this value anymore */
free(orte_parent_uri);
orte_parent_uri = NULL;
/* tell the routed module that we have a path
* back to the HNP
*/
if (ORTE_SUCCESS != (ret = orte_routed.update_route(ORTE_PROC_MY_HNP, &parent))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* set the lifeline to point to our parent so that we
* can handle the situation if that lifeline goes away
*/
if (ORTE_SUCCESS != (ret = orte_routed.set_lifeline(&parent))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
}
/* if we are not the HNP...the only time we will be an HNP
* is if we are launched by a singleton to provide support
* for it
*/
if (!ORTE_PROC_IS_HNP) {
/* send the information to the orted report-back point - this function
* will process the data, but also counts the number of
* orteds that reported back so the launch procedure can continue.
* We need to do this at the last possible second as the HNP
* can turn right around and begin issuing orders to us
*/
buffer = OBJ_NEW(opal_buffer_t);
/* insert our name for rollup purposes */
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, ORTE_PROC_MY_NAME, 1, ORTE_NAME))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
/* for now, always include our contact info, even if we are using
* static ports. Eventually, this will be removed
*/
rml_uri = orte_rml.get_contact_info();
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &rml_uri, 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
/* include our node name */
opal_dss.pack(buffer, &orte_process_info.nodename, 1, OPAL_STRING);
/* if requested, include any non-loopback aliases for this node */
if (orte_retain_aliases) {
char **aliases=NULL;
uint8_t naliases, ni;
char hostname[ORTE_MAX_HOSTNAME_SIZE];
/* if we stripped the prefix or removed the fqdn,
* include full hostname as an alias
*/
gethostname(hostname, ORTE_MAX_HOSTNAME_SIZE);
if (strlen(orte_process_info.nodename) < strlen(hostname)) {
opal_argv_append_nosize(&aliases, hostname);
}
opal_ifgetaliases(&aliases);
naliases = opal_argv_count(aliases);
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &naliases, 1, OPAL_UINT8))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
for (ni=0; ni < naliases; ni++) {
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &aliases[ni], 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
}
opal_argv_free(aliases);
}
#if OPAL_HAVE_HWLOC
{
char *coprocessors;
/* add the local topology */
if (NULL != opal_hwloc_topology &&
(1 == ORTE_PROC_MY_NAME->vpid || orte_hetero_nodes)) {
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &opal_hwloc_topology, 1, OPAL_HWLOC_TOPO))) {
ORTE_ERROR_LOG(ret);
}
}
/* detect and add any coprocessors */
coprocessors = opal_hwloc_base_find_coprocessors(opal_hwloc_topology);
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &coprocessors, 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
}
/* see if I am on a coprocessor */
coprocessors = opal_hwloc_base_check_on_coprocessor();
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &coprocessors, 1, OPAL_STRING))) {
ORTE_ERROR_LOG(ret);
}
}
#endif
/* send to the HNP's callback - will be routed if routes are available */
if (0 > (ret = orte_rml.send_buffer_nb(ORTE_PROC_MY_HNP, buffer,
ORTE_RML_TAG_ORTED_CALLBACK,
orte_rml_send_callback, NULL))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
}
/* if we are tree-spawning, then we need to capture the MCA params
* from our cmd line so we can pass them along to the daemons we spawn -
* otherwise, only the first layer of daemons will ever see them
*/
if (orted_globals.tree_spawn) {
int j, k;
bool ignore;
char *no_keep[] = {
"orte_hnp_uri",
"orte_ess_jobid",
"orte_ess_vpid",
"orte_ess_num_procs",
"orte_parent_uri",
"mca_base_env_list",
NULL
};
for (i=0; i < argc; i++) {
if (0 == strcmp("-"OPAL_MCA_CMD_LINE_ID, argv[i]) ||
0 == strcmp("--"OPAL_MCA_CMD_LINE_ID, argv[i]) ) {
ignore = false;
/* see if this is something we cannot pass along */
for (k=0; NULL != no_keep[k]; k++) {
if (0 == strcmp(no_keep[k], argv[i+1])) {
ignore = true;
break;
}
}
if (!ignore) {
/* see if this is already present so we at least can
* avoid growing the cmd line with duplicates
*/
if (NULL != orted_cmd_line) {
for (j=0; NULL != orted_cmd_line[j]; j++) {
if (0 == strcmp(argv[i+1], orted_cmd_line[j])) {
/* already here - ignore it */
ignore = true;
break;
}
}
}
if (!ignore) {
opal_argv_append_nosize(&orted_cmd_line, argv[i]);
opal_argv_append_nosize(&orted_cmd_line, argv[i+1]);
opal_argv_append_nosize(&orted_cmd_line, argv[i+2]);
}
}
i += 2;
}
}
}
if (orte_debug_daemons_flag) {
opal_output(0, "%s orted: up and running - waiting for commands!", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
}
ret = ORTE_SUCCESS;
/* loop the event lib until an exit event is detected */
while (orte_event_base_active) {
opal_event_loop(orte_event_base, OPAL_EVLOOP_ONCE);
}
/* ensure all local procs are dead */
orte_odls.kill_local_procs(NULL);
DONE:
/* update the exit status, in case it wasn't done */
ORTE_UPDATE_EXIT_STATUS(ret);
/* cleanup and leave */
orte_finalize();
if (orte_debug_flag) {
fprintf(stderr, "exiting with status %d\n", orte_exit_status);
}
exit(orte_exit_status);
}
static int local_setup(void)
{
int ret;
char *error = NULL;
int value;
orte_proc_t *proc;
orte_node_t *node;
orte_app_context_t *app;
/* initialize the global list of local children and job data */
OBJ_CONSTRUCT(&orte_local_children, opal_list_t);
OBJ_CONSTRUCT(&orte_local_jobdata, opal_list_t);
/* determine the topology info */
if (0 == orte_default_num_sockets_per_board) {
/* we weren't given a number, so try to determine it */
if (OPAL_SUCCESS != opal_paffinity_base_get_socket_info(&value)) {
/* can't get any info - default to 1 */
value = 1;
}
orte_default_num_sockets_per_board = (uint8_t)value;
}
if (0 == orte_default_num_cores_per_socket) {
/* we weren't given a number, so try to determine it */
if (OPAL_SUCCESS != opal_paffinity_base_get_core_info(0, &value)) {
/* don't have topo info - can we at least get #processors? */
if (OPAL_SUCCESS != opal_paffinity_base_get_processor_info(&value)) {
/* can't get any info - default to 1 */
value = 1;
}
}
orte_default_num_cores_per_socket = (uint8_t)value;
}
/* setup the global job and node arrays */
orte_job_data = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_job_data,
1,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
1))) {
ORTE_ERROR_LOG(ret);
error = "setup job array";
goto error;
}
orte_node_pool = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_pool,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node array";
goto error;
}
/* Setup the job data object for the daemons */
/* create and store the job data object */
daemons = OBJ_NEW(orte_job_t);
daemons->jobid = ORTE_PROC_MY_NAME->jobid;
daemons->name = strdup("ORCM DVM");
daemons->instance = strdup(ORTE_JOBID_PRINT(ORTE_PROC_MY_NAME->jobid));
/* create an app */
app = OBJ_NEW(orte_app_context_t);
app->app = strdup("orcmd");
opal_argv_append_nosize(&app->argv, "orcmd");
/* add to the daemon job - always must be an app for a job */
opal_pointer_array_add(daemons->apps, app);
/* setup the daemon map so it knows how to map them */
daemons->map = OBJ_NEW(orte_job_map_t);
daemons->map->policy = ORTE_MAPPING_BYNODE;
/* save it */
opal_pointer_array_set_item(orte_job_data, 0, daemons);
/* ensure our mapping policy will utilize any VM */
ORTE_ADD_MAPPING_POLICY(ORTE_MAPPING_USE_VM);
/* use bynode mapping by default */
ORTE_ADD_MAPPING_POLICY(ORTE_MAPPING_BYNODE);
/* create and store a node object where we are */
node = OBJ_NEW(orte_node_t);
node->name = strdup(orte_process_info.nodename);
node->slots = 1; /* min number */
node->slots_alloc = node->slots;
node->index = ORTE_PROC_MY_NAME->vpid;
opal_pointer_array_set_item(orte_node_pool, ORTE_PROC_MY_NAME->vpid, node);
/* create and store a proc object for us */
proc = OBJ_NEW(orte_proc_t);
proc->name.jobid = ORTE_PROC_MY_NAME->jobid;
proc->name.vpid = ORTE_PROC_MY_NAME->vpid;
proc->pid = orte_process_info.pid;
proc->state = ORTE_PROC_STATE_RUNNING;
OBJ_RETAIN(node); /* keep accounting straight */
proc->node = node;
proc->nodename = node->name;
opal_pointer_array_set_item(daemons->procs, proc->name.vpid, proc);
/* record that the daemon (i.e., us) is on this node
* NOTE: we do not add the proc object to the node's
* proc array because we are not an application proc.
* Instead, we record it in the daemon field of the
* node object
*/
OBJ_RETAIN(proc); /* keep accounting straight */
node->daemon = proc;
node->daemon_launched = true;
node->state = ORTE_NODE_STATE_UP;
/* record that the daemon job is running */
daemons->num_procs = 1;
daemons->state = ORTE_JOB_STATE_RUNNING;
/* open and setup the opal_pstat framework so we can provide
* process stats if requested
*/
if (ORTE_SUCCESS != (ret = opal_pstat_base_open())) {
ORTE_ERROR_LOG(ret);
error = "opal_pstat_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_pstat_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_pstat_base_select";
goto error;
}
/* open and setup the local resource discovery framework */
if (ORTE_SUCCESS != (ret = opal_sysinfo_base_open())) {
ORTE_ERROR_LOG(ret);
error = "opal_sysinfo_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_sysinfo_base_select())) {
ORTE_ERROR_LOG(ret);
error = "opal_sysinfo_base_select";
goto error;
}
/* Setup the communication infrastructure */
/* Runtime Messaging Layer - this opens/selects the OOB as well */
if (ORTE_SUCCESS != (ret = orte_rml_base_open())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rml_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml_base_select";
goto error;
}
/* Routed system */
if (ORTE_SUCCESS != (ret = orte_routed_base_open())) {
ORTE_ERROR_LOG(ret);
error = "orte_routed_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_routed_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_routed_base_select";
goto error;
}
/* multicast */
if (ORTE_SUCCESS != (ret = orte_rmcast_base_open())) {
ORTE_ERROR_LOG(ret);
error = "orte_rmcast_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rmcast_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_rmcast_base_select";
goto error;
}
/* Open/select the odls */
if (ORTE_SUCCESS != (ret = orte_odls_base_open())) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_odls_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_select";
goto error;
}
/* enable communication with the rml */
if (ORTE_SUCCESS != (ret = orte_rml.enable_comm())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml.enable_comm";
goto error;
}
/* insert our contact info into our process_info struct so we
* have it for later use and set the local daemon field to our name
*/
orte_process_info.my_daemon_uri = orte_rml.get_contact_info();
ORTE_PROC_MY_DAEMON->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_DAEMON->vpid = ORTE_PROC_MY_NAME->vpid;
proc->rml_uri = orte_rml.get_contact_info();
/* setup the pnp framework */
if (ORCM_SUCCESS != (ret = orcm_pnp_base_open())) {
error = "pnp_open";
goto error;
}
if (ORCM_SUCCESS != (ret = orcm_pnp_base_select())) {
error = "pnp_select";
goto error;
}
/* setup the leader framework */
if (ORCM_SUCCESS != (ret = orcm_leader_base_open())) {
error = "leader_open";
goto error;
}
if (ORCM_SUCCESS != (ret = orcm_leader_base_select())) {
error = "leader_select";
goto error;
}
/* set the communication function */
orte_comm = orte_global_comm;
/* update the routing tree */
if (ORTE_SUCCESS != (ret = orte_routed.update_routing_tree())) {
ORTE_ERROR_LOG(ret);
error = "failed to update routing tree";
goto error;
}
/* setup the routed info - the selected routed component
* will know what to do.
*/
if (ORTE_SUCCESS != (ret = orte_routed.init_routes(ORTE_PROC_MY_NAME->jobid, NULL))) {
ORTE_ERROR_LOG(ret);
error = "orte_routed.init_routes";
goto error;
}
/* open/select the errmgr - do this after the daemon job
* has been defined so that the errmgr can get that
* job object
*/
if (ORTE_SUCCESS != (ret = orte_errmgr_base_open())) {
ORTE_ERROR_LOG(ret);
error = "orte_errmgr_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_errmgr_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_errmgr_base_select";
goto error;
}
/* We actually do *not* want an orcm to voluntarily yield() the
processor more than necessary. orcm already blocks when
it is doing nothing, so it doesn't use any more CPU cycles than
it should; but when it *is* doing something, we do not want it
to be unnecessarily delayed because it voluntarily yielded the
processor in the middle of its work.
For example: when a message arrives at orcm, we want the
OS to wake us up in a timely fashion (which most OS's
seem good about doing) and then we want orcm to process
the message as fast as possible. If orcm yields and lets
aggressive applications get the processor back, it may be a
long time before the OS schedules orcm to run again
(particularly if there is no IO event to wake it up). Hence,
routed OOB messages (for example) may be significantly delayed
before being delivered to processes, which can be
problematic in some scenarios */
opal_progress_set_yield_when_idle(false);
/* Change the default behavior of libevent such that we want to
continually block rather than blocking for the default timeout
and then looping around the progress engine again. There
should be nothing in the orcmd that cannot block in libevent
until "something" happens (i.e., there's no need to keep
cycling through progress because the only things that should
happen will happen in libevent). This is a minor optimization,
but what the heck... :-) */
opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);
/* setup the primary daemon command receive function */
ret = orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
ORTE_RML_NON_PERSISTENT, orte_daemon_recv, NULL);
if (ret != ORTE_SUCCESS && ret != ORTE_ERR_NOT_IMPLEMENTED) {
ORTE_ERROR_LOG(ret);
error = "daemon_recv";
goto error;
}
/* output a message indicating we are alive, our name, and our pid
* for debugging purposes
*/
if (orte_debug_daemons_flag) {
fprintf(stderr, "%s checking in as pid %ld on host %s\n",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)orte_process_info.pid,
orte_process_info.nodename);
}
/* listen for termination cmds */
if (ORCM_SUCCESS != (ret = orcm_pnp.register_receive("orcm", "0.1", "alpha",
ORCM_PNP_SYS_CHANNEL,
ORCM_PNP_TAG_TERMINATE,
vm_term, NULL))) {
error = "orcm recv";
goto error;
}
if (ORCM_SUCCESS != (ret = orcm_pnp.register_receive("orcm-stop", "0.1", "alpha",
ORCM_PNP_SYS_CHANNEL,
ORCM_PNP_TAG_TERMINATE,
vm_term, NULL))) {
error = "orcm-stop recv";
goto error;
}
/* register to catch vm commands requests */
if (ORCM_SUCCESS != (ret = orcm_pnp.register_receive("orcm-sched", "0.1", "alpha",
ORCM_PNP_SYS_CHANNEL,
ORCM_PNP_TAG_COMMAND,
vm_cmd, NULL))) {
error = "orcm-sched recv";
goto error;
}
/* listen for state data requests */
if (ORCM_SUCCESS != (ret = orcm_pnp.register_receive("orcm-sched", "0.1", "alpha",
ORCM_PNP_SYS_CHANNEL,
ORCM_PNP_TAG_BOOTSTRAP,
recv_contact, NULL))) {
error = "contact recv";
goto error;
}
/* setup the SENSOR framework */
if (ORTE_SUCCESS != (ret = orte_sensor_base_open())) {
ORTE_ERROR_LOG(ret);
error = "orte_sensor_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_sensor_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_sensor_select";
goto error;
}
/* announce our existence - this carries with it our rml uri and
* our local node system info
*/
if (ORCM_SUCCESS != (ret = orcm_pnp.announce("ORCMD", "0.1", "alpha", vm_tracker))) {
ORTE_ERROR_LOG(ret);
error = "announce";
goto error;
}
return ORTE_SUCCESS;
error:
orte_show_help("help-orte-runtime.txt",
"orte_init:startup:internal-failure",
true, error, ORTE_ERROR_NAME(ret), ret);
return ret;
}
int main(int argc, char *argv[])
{
int ret = 0;
opal_cmd_line_t *cmd_line = NULL;
char *rml_uri;
#if OPAL_ENABLE_FT_CR == 1
char * tmp_env_var = NULL;
#endif
/* init enough of opal to process cmd lines */
if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
exit(1);
}
/* setup to check common command line options that just report and die */
cmd_line = OBJ_NEW(opal_cmd_line_t);
opal_cmd_line_create(cmd_line, orte_server_cmd_line_opts);
mca_base_cmd_line_setup(cmd_line);
if (OPAL_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false, false,
argc, argv))) {
if (OPAL_ERR_SILENT != ret) {
fprintf(stderr, "%s: command line error (%s)\n", argv[0],
opal_strerror(ret));
}
return 1;
}
/* check for help request */
if (help) {
char *str, *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
str = opal_show_help_string("help-orte-server.txt",
"orteserver:usage", false,
argv[0], args);
if (NULL != str) {
printf("%s", str);
free(str);
}
free(args);
/* If we show the help message, that should be all we do */
return 0;
}
/*
* Since this process can now handle MCA/GMCA parameters, make sure to
* process them.
*/
mca_base_cmd_line_process_args(cmd_line, &environ, &environ);
/* if debug is set, then set orte_debug_flag so that the data server
* code will output
*/
if (debug) {
putenv(OPAL_MCA_PREFIX"orte_debug=1");
}
/* detach from controlling terminal
* otherwise, remain attached so output can get to us
*/
if(debug == false &&
no_daemonize == false) {
opal_daemon_init(NULL);
}
#if OPAL_ENABLE_FT_CR == 1
/* Disable the checkpoint notification routine for this
* tool. As we will never need to checkpoint this tool.
* Note: This must happen before opal_init().
*/
opal_cr_set_enabled(false);
/* Select the none component, since we don't actually use a checkpointer */
(void) mca_base_var_env_name("crs", &tmp_env_var);
opal_setenv(tmp_env_var,
"none",
true, &environ);
free(tmp_env_var);
tmp_env_var = NULL;
/* Mark as a tool program */
(void) mca_base_var_env_name("opal_cr_is_tool", &tmp_env_var);
opal_setenv(tmp_env_var,
"1",
true, &environ);
free(tmp_env_var);
#endif
/* don't want session directories */
orte_create_session_dirs = false;
/* Perform the standard init, but flag that we are an HNP */
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
fprintf(stderr, "orte-server: failed to initialize -- aborting\n");
exit(1);
}
/* report out our URI, if we were requested to do so, using syntax
* proposed in an email thread by Jeff Squyres
*/
if (NULL != report_uri) {
orte_oob_base_get_addr(&rml_uri);
if (0 == strcmp(report_uri, "-")) {
/* if '-', then output to stdout */
printf("%s\n", rml_uri);
} else if (0 == strcmp(report_uri, "+")) {
/* if '+', output to stderr */
fprintf(stderr, "%s\n", rml_uri);
} else {
/* treat it as a filename and output into it */
FILE *fp;
fp = fopen(report_uri, "w");
if (NULL == fp) {
fprintf(stderr, "orte-server: failed to open designated file %s -- aborting\n", report_uri);
orte_finalize();
exit(1);
}
fprintf(fp, "%s\n", rml_uri);
fclose(fp);
}
free(rml_uri);
}
/* setup the data server to listen for commands */
if (ORTE_SUCCESS != (ret = orte_data_server_init())) {
fprintf(stderr, "orte-server: failed to start data server -- aborting\n");
orte_finalize();
exit(1);
}
/* setup to listen for commands sent specifically to me */
orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
ORTE_RML_NON_PERSISTENT, orte_daemon_recv, NULL);
/* Set signal handlers to catch kill signals so we can properly clean up
* after ourselves.
*/
opal_event_set(orte_event_base, &term_handler, SIGTERM, OPAL_EV_SIGNAL,
shutdown_callback, NULL);
opal_event_add(&term_handler, NULL);
opal_event_set(orte_event_base, &int_handler, SIGINT, OPAL_EV_SIGNAL,
shutdown_callback, NULL);
opal_event_add(&int_handler, NULL);
/* We actually do *not* want the server to voluntarily yield() the
processor more than necessary. The server already blocks when
it is doing nothing, so it doesn't use any more CPU cycles than
it should; but when it *is* doing something, we do not want it
to be unnecessarily delayed because it voluntarily yielded the
processor in the middle of its work.
For example: when a message arrives at the server, we want the
OS to wake up the server in a timely fashion (which most OS's
seem good about doing) and then we want the server to process
the message as fast as possible. If the server yields and lets
aggressive MPI applications get the processor back, it may be a
long time before the OS schedules the server to run again
(particularly if there is no IO event to wake it up). Hence,
publish and lookup (for example) may be significantly delayed
before being delivered to MPI processes, which can be
problematic in some scenarios (e.g., COMM_SPAWN). */
opal_progress_set_yield_when_idle(false);
/* Change the default behavior of libevent such that we want to
continually block rather than blocking for the default timeout
and then looping around the progress engine again. There
should be nothing in the server that cannot block in libevent
until "something" happens (i.e., there's no need to keep
cycling through progress because the only things that should
happen will happen in libevent). This is a minor optimization,
but what the heck... :-) */
opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);
if (debug) {
opal_output(0, "%s orte-server: up and running!", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
}
/* wait to hear we are done */
while (orte_event_base_active) {
opal_event_loop(orte_event_base, OPAL_EVLOOP_ONCE);
}
ORTE_ACQUIRE_OBJECT(orte_event_base_active);
/* should never get here, but if we do... */
/* Finalize and clean up ourselves */
orte_finalize();
return orte_exit_status;
}
int orte_daemon(int argc, char *argv[])
{
int ret = 0;
opal_cmd_line_t *cmd_line = NULL;
int i;
opal_buffer_t *buffer;
char hostname[OPAL_MAXHOSTNAMELEN];
#if OPAL_ENABLE_FT_CR == 1
char *tmp_env_var = NULL;
#endif
/* initialize the globals */
memset(&orted_globals, 0, sizeof(orted_globals));
/* initialize the singleton died pipe to an illegal value so we can detect it was set */
orted_globals.singleton_died_pipe = -1;
bucket = OBJ_NEW(opal_buffer_t);
/* setup to check common command line options that just report and die */
cmd_line = OBJ_NEW(opal_cmd_line_t);
if (OPAL_SUCCESS != opal_cmd_line_create(cmd_line, orte_cmd_line_opts)) {
OBJ_RELEASE(cmd_line);
exit(1);
}
mca_base_cmd_line_setup(cmd_line);
if (ORTE_SUCCESS != (ret = opal_cmd_line_parse(cmd_line, false, false,
argc, argv))) {
char *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
fprintf(stderr, "Usage: %s [OPTION]...\n%s\n", argv[0], args);
free(args);
OBJ_RELEASE(cmd_line);
return ret;
}
/*
* Since this process can now handle MCA/GMCA parameters, make sure to
* process them.
*/
mca_base_cmd_line_process_args(cmd_line, &environ, &environ);
/* Ensure that enough of OPAL is setup for us to be able to run */
/*
* NOTE: (JJH)
* We need to allow 'mca_base_cmd_line_process_args()' to process command
* line arguments *before* calling opal_init_util() since the command
* line could contain MCA parameters that affect the way opal_init_util()
* functions. AMCA parameters are one such option normally received on the
* command line that affect the way opal_init_util() behaves.
* It is "safe" to call mca_base_cmd_line_process_args() before
* opal_init_util() since mca_base_cmd_line_process_args() does *not*
* depend upon opal_init_util() functionality.
*/
if (OPAL_SUCCESS != opal_init_util(&argc, &argv)) {
fprintf(stderr, "OPAL failed to initialize -- orted aborting\n");
exit(1);
}
/* save the environment for launch purposes. This MUST be
* done so that we can pass it to any local procs we
* spawn - otherwise, those local procs won't see any
* non-MCA envars that were set in the enviro when the
* orted was executed - e.g., by .csh
*/
orte_launch_environ = opal_argv_copy(environ);
/* purge any ess/pmix flags set in the environ when we were launched */
opal_unsetenv(OPAL_MCA_PREFIX"ess", &orte_launch_environ);
opal_unsetenv(OPAL_MCA_PREFIX"pmix", &orte_launch_environ);
/* if orte_daemon_debug is set, let someone know we are alive right
* away just in case we have a problem along the way
*/
if (orted_globals.debug) {
gethostname(hostname, sizeof(hostname));
fprintf(stderr, "Daemon was launched on %s - beginning to initialize\n", hostname);
}
/* check for help request */
if (orted_globals.help) {
char *args = NULL;
args = opal_cmd_line_get_usage_msg(cmd_line);
orte_show_help("help-orted.txt", "orted:usage", false,
argv[0], args);
free(args);
return 1;
}
#if defined(HAVE_SETSID)
/* see if we were directed to separate from current session */
if (orted_globals.set_sid) {
setsid();
}
#endif
/* see if they want us to spin until they can connect a debugger to us */
i=0;
while (orted_spin_flag) {
i++;
if (1000 < i) i=0;
}
#if OPAL_ENABLE_FT_CR == 1
/* Mark as a tool program */
(void) mca_base_var_env_name ("opal_cr_is_tool", &tmp_env_var);
opal_setenv(tmp_env_var,
"1",
true, &environ);
free(tmp_env_var);
#endif
/* detach from controlling terminal
* otherwise, remain attached so output can get to us
*/
if(!orte_debug_flag &&
!orte_debug_daemons_flag &&
orted_globals.daemonize) {
opal_daemon_init(NULL);
}
/* Set the flag telling OpenRTE that I am NOT a
* singleton, but am "infrastructure" - prevents setting
* up incorrect infrastructure that only a singleton would
* require.
*/
if (orted_globals.hnp) {
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_HNP))) {
ORTE_ERROR_LOG(ret);
return ret;
}
} else {
if (ORTE_SUCCESS != (ret = orte_init(&argc, &argv, ORTE_PROC_DAEMON))) {
ORTE_ERROR_LOG(ret);
return ret;
}
}
/* finalize the OPAL utils. As they are opened again from orte_init->opal_init
* we continue to have a reference count on them. So we have to finalize them twice...
*/
opal_finalize_util();
/* bind ourselves if so directed */
if (NULL != orte_daemon_cores) {
char **cores=NULL, tmp[128];
hwloc_obj_t pu;
hwloc_cpuset_t ours, res;
int core;
/* could be a collection of comma-delimited ranges, so
* use our handy utility to parse it
*/
orte_util_parse_range_options(orte_daemon_cores, &cores);
if (NULL != cores) {
ours = hwloc_bitmap_alloc();
hwloc_bitmap_zero(ours);
res = hwloc_bitmap_alloc();
for (i=0; NULL != cores[i]; i++) {
core = strtoul(cores[i], NULL, 10);
if (NULL == (pu = opal_hwloc_base_get_pu(opal_hwloc_topology, core, OPAL_HWLOC_LOGICAL))) {
/* turn off the show help forwarding as we won't
* be able to cycle the event library to send
*/
orte_show_help_finalize();
/* the message will now come out locally */
orte_show_help("help-orted.txt", "orted:cannot-bind",
true, orte_process_info.nodename,
orte_daemon_cores);
ret = ORTE_ERR_NOT_SUPPORTED;
hwloc_bitmap_free(ours);
hwloc_bitmap_free(res);
goto DONE;
}
hwloc_bitmap_or(res, ours, pu->cpuset);
hwloc_bitmap_copy(ours, res);
}
/* if the result is all zeros, then don't bind */
if (!hwloc_bitmap_iszero(ours)) {
(void)hwloc_set_cpubind(opal_hwloc_topology, ours, 0);
if (opal_hwloc_report_bindings) {
opal_hwloc_base_cset2mapstr(tmp, sizeof(tmp), opal_hwloc_topology, ours);
opal_output(0, "Daemon %s is bound to cores %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), tmp);
}
}
/* cleanup */
hwloc_bitmap_free(ours);
hwloc_bitmap_free(res);
opal_argv_free(cores);
}
}
if ((int)ORTE_VPID_INVALID != orted_debug_failure) {
orted_globals.abort=false;
/* some vpid was ordered to fail. The value can be positive
* or negative, depending upon the desired method for failure,
* so need to check both here
*/
if (0 > orted_debug_failure) {
orted_debug_failure = -1*orted_debug_failure;
orted_globals.abort = true;
}
/* are we the specified vpid? */
if ((int)ORTE_PROC_MY_NAME->vpid == orted_debug_failure) {
/* if the user specified we delay, then setup a timer
* and have it kill us
*/
if (0 < orted_debug_failure_delay) {
ORTE_TIMER_EVENT(orted_debug_failure_delay, 0, shutdown_callback, ORTE_SYS_PRI);
} else {
opal_output(0, "%s is executing clean %s", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
orted_globals.abort ? "abort" : "abnormal termination");
/* do -not- call finalize as this will send a message to the HNP
* indicating clean termination! Instead, just forcibly cleanup
* the local session_dir tree and exit
*/
orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
/* if we were ordered to abort, do so */
if (orted_globals.abort) {
abort();
}
/* otherwise, return with non-zero status */
ret = ORTE_ERROR_DEFAULT_EXIT_CODE;
goto DONE;
}
}
}
/* insert our contact info into our process_info struct so we
* have it for later use and set the local daemon field to our name
*/
orte_oob_base_get_addr(&orte_process_info.my_daemon_uri);
if (NULL == orte_process_info.my_daemon_uri) {
/* no way to communicate */
ret = ORTE_ERROR;
goto DONE;
}
ORTE_PROC_MY_DAEMON->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_DAEMON->vpid = ORTE_PROC_MY_NAME->vpid;
/* if I am also the hnp, then update that contact info field too */
if (ORTE_PROC_IS_HNP) {
orte_process_info.my_hnp_uri = strdup(orte_process_info.my_daemon_uri);
ORTE_PROC_MY_HNP->jobid = ORTE_PROC_MY_NAME->jobid;
ORTE_PROC_MY_HNP->vpid = ORTE_PROC_MY_NAME->vpid;
}
/* setup the primary daemon command receive function */
orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_DAEMON,
ORTE_RML_PERSISTENT, orte_daemon_recv, NULL);
/* output a message indicating we are alive, our name, and our pid
* for debugging purposes
*/
if (orte_debug_daemons_flag) {
fprintf(stderr, "Daemon %s checking in as pid %ld on host %s\n",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), (long)orte_process_info.pid,
orte_process_info.nodename);
}
/* We actually do *not* want the orted to voluntarily yield() the
processor more than necessary. The orted already blocks when
it is doing nothing, so it doesn't use any more CPU cycles than
it should; but when it *is* doing something, we do not want it
to be unnecessarily delayed because it voluntarily yielded the
processor in the middle of its work.
For example: when a message arrives at the orted, we want the
OS to wake up the orted in a timely fashion (which most OS's
seem good about doing) and then we want the orted to process
the message as fast as possible. If the orted yields and lets
aggressive MPI applications get the processor back, it may be a
long time before the OS schedules the orted to run again
(particularly if there is no IO event to wake it up). Hence,
routed OOB messages (for example) may be significantly delayed
before being delivered to MPI processes, which can be
problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
require OOB messages for wireup, etc.). */
opal_progress_set_yield_when_idle(false);
/* Change the default behavior of libevent such that we want to
continually block rather than blocking for the default timeout
and then looping around the progress engine again. There
should be nothing in the orted that cannot block in libevent
until "something" happens (i.e., there's no need to keep
cycling through progress because the only things that should
happen will happen in libevent). This is a minor optimization,
but what the heck... :-) */
opal_progress_set_event_flag(OPAL_EVLOOP_ONCE);
/* if requested, report my uri to the indicated pipe */
if (orted_globals.uri_pipe > 0) {
orte_job_t *jdata;
orte_proc_t *proc;
orte_node_t *node;
orte_app_context_t *app;
char *tmp, *nptr, *sysinfo;
char **singenv=NULL, *string_key, *env_str;
/* setup the singleton's job */
jdata = OBJ_NEW(orte_job_t);
/* default to ompi for now */
opal_argv_append_nosize(&jdata->personality, "ompi");
orte_plm_base_create_jobid(jdata);
opal_hash_table_set_value_uint32(orte_job_data, jdata->jobid, jdata);
/* must create a map for it (even though it has no
* info in it) so that the job info will be picked
* up in subsequent pidmaps or other daemons won't
* know how to route
*/
jdata->map = OBJ_NEW(orte_job_map_t);
/* setup an app_context for the singleton */
app = OBJ_NEW(orte_app_context_t);
app->app = strdup("singleton");
app->num_procs = 1;
opal_pointer_array_add(jdata->apps, app);
jdata->num_apps = 1;
/* setup a proc object for the singleton - since we
* -must- be the HNP, and therefore we stored our
* node on the global node pool, and since the singleton
* -must- be on the same node as us, indicate that
*/
proc = OBJ_NEW(orte_proc_t);
proc->name.jobid = jdata->jobid;
proc->name.vpid = 0;
proc->parent = 0;
ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_ALIVE);
proc->state = ORTE_PROC_STATE_RUNNING;
proc->app_idx = 0;
/* obviously, it is on my node */
node = (orte_node_t*)opal_pointer_array_get_item(orte_node_pool, 0);
proc->node = node;
OBJ_RETAIN(node); /* keep accounting straight */
opal_pointer_array_add(jdata->procs, proc);
jdata->num_procs = 1;
/* add the node to the job map */
OBJ_RETAIN(node);
opal_pointer_array_add(jdata->map->nodes, node);
jdata->map->num_nodes++;
/* and it obviously is on the node */
OBJ_RETAIN(proc);
opal_pointer_array_add(node->procs, proc);
node->num_procs++;
/* and obviously it is one of my local procs */
OBJ_RETAIN(proc);
opal_pointer_array_add(orte_local_children, proc);
jdata->num_local_procs = 1;
/* set the trivial */
proc->local_rank = 0;
proc->node_rank = 0;
proc->app_rank = 0;
proc->state = ORTE_PROC_STATE_RUNNING;
proc->app_idx = 0;
ORTE_FLAG_SET(proc, ORTE_PROC_FLAG_LOCAL);
/* set the ORTE_JOB_TRANSPORT_KEY from the environment */
orte_pre_condition_transports(jdata, NULL);
/* register the singleton's nspace with our PMIx server */
if (ORTE_SUCCESS != (ret = orte_pmix_server_register_nspace(jdata, false))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* use setup fork to create the envars needed by the singleton */
if (OPAL_SUCCESS != (ret = opal_pmix.server_setup_fork(&proc->name, &singenv))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* append the transport key to the envars needed by the singleton */
if (!orte_get_attribute(&jdata->attributes, ORTE_JOB_TRANSPORT_KEY, (void**)&string_key, OPAL_STRING) || NULL == string_key) {
ORTE_ERROR_LOG(ORTE_ERR_NOT_FOUND);
goto DONE;
}
asprintf(&env_str, OPAL_MCA_PREFIX"orte_precondition_transports=%s", string_key);
opal_argv_append_nosize(&singenv, env_str);
free(env_str);
nptr = opal_argv_join(singenv, '*');
opal_argv_free(singenv);
/* create a string that contains our uri + sysinfo + PMIx server URI envars */
orte_util_convert_sysinfo_to_string(&sysinfo, orte_local_cpu_type, orte_local_cpu_model);
asprintf(&tmp, "%s[%s]%s", orte_process_info.my_daemon_uri, sysinfo, nptr);
free(sysinfo);
free(nptr);
/* pass that info to the singleton */
if (OPAL_SUCCESS != (ret = opal_fd_write(orted_globals.uri_pipe, strlen(tmp)+1, tmp))) { ; /* need to add 1 to get the NULL */
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* cleanup */
free(tmp);
close(orted_globals.uri_pipe);
/* since a singleton spawned us, we need to harvest
* any MCA params from the local environment so
* we can pass them along to any subsequent daemons
* we may start as the result of a comm_spawn
*/
for (i=0; NULL != environ[i]; i++) {
if (0 == strncmp(environ[i], OPAL_MCA_PREFIX, 9)) {
/* make a copy to manipulate */
tmp = strdup(environ[i]);
/* find the equal sign */
nptr = strchr(tmp, '=');
*nptr = '\0';
nptr++;
/* add the mca param to the orted cmd line */
opal_argv_append_nosize(&orted_cmd_line, "-"OPAL_MCA_CMD_LINE_ID);
opal_argv_append_nosize(&orted_cmd_line, &tmp[9]);
opal_argv_append_nosize(&orted_cmd_line, nptr);
free(tmp);
}
}
}
/* if we were given a pipe to monitor for singleton termination, set that up */
if (orted_globals.singleton_died_pipe > 0) {
/* register shutdown handler */
pipe_handler = (opal_event_t*)malloc(sizeof(opal_event_t));
opal_event_set(orte_event_base, pipe_handler,
orted_globals.singleton_died_pipe,
OPAL_EV_READ,
pipe_closed,
pipe_handler);
opal_event_add(pipe_handler, NULL);
}
/* If I have a parent, then save his contact info so
* any messages we send can flow thru him.
*/
orte_parent_uri = NULL;
(void) mca_base_var_register ("orte", "orte", NULL, "parent_uri",
"URI for the parent if tree launch is enabled.",
MCA_BASE_VAR_TYPE_STRING, NULL, 0,
MCA_BASE_VAR_FLAG_INTERNAL,
OPAL_INFO_LVL_9,
MCA_BASE_VAR_SCOPE_CONSTANT,
&orte_parent_uri);
if (NULL != orte_parent_uri) {
orte_process_name_t parent;
opal_value_t val;
/* set the contact info into our local database */
ret = orte_rml_base_parse_uris(orte_parent_uri, &parent, NULL);
if (ORTE_SUCCESS != ret) {
ORTE_ERROR_LOG(ret);
free (orte_parent_uri);
orte_parent_uri = NULL;
goto DONE;
}
OBJ_CONSTRUCT(&val, opal_value_t);
val.key = OPAL_PMIX_PROC_URI;
val.type = OPAL_STRING;
val.data.string = orte_parent_uri;
if (OPAL_SUCCESS != (ret = opal_pmix.store_local(&parent, &val))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&val);
goto DONE;
}
val.key = NULL;
val.data.string = NULL;
OBJ_DESTRUCT(&val);
/* don't need this value anymore */
free(orte_parent_uri);
orte_parent_uri = NULL;
/* tell the routed module that we have a path
* back to the HNP
*/
if (ORTE_SUCCESS != (ret = orte_routed.update_route(NULL, ORTE_PROC_MY_HNP, &parent))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
/* set the lifeline to point to our parent so that we
* can handle the situation if that lifeline goes away
*/
if (ORTE_SUCCESS != (ret = orte_routed.set_lifeline(NULL, &parent))) {
ORTE_ERROR_LOG(ret);
goto DONE;
}
}
/* if we are not the HNP...the only time we will be an HNP
* is if we are launched by a singleton to provide support
* for it
*/
if (!ORTE_PROC_IS_HNP) {
orte_process_name_t target;
target.jobid = ORTE_PROC_MY_NAME->jobid;
if (orte_fwd_mpirun_port || orte_static_ports) {
/* setup the rollup callback */
orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_ORTED_CALLBACK,
ORTE_RML_PERSISTENT, rollup, NULL);
target.vpid = ORTE_PROC_MY_NAME->vpid;
/* since we will be waiting for any children to send us
* their rollup info before sending to our parent, save
* a little time in the launch phase by "warming up" the
* connection to our parent while we wait for our children */
buffer = OBJ_NEW(opal_buffer_t); // zero-byte message
if (0 > (ret = orte_rml.send_buffer_nb(orte_mgmt_conduit,
ORTE_PROC_MY_PARENT, buffer,
ORTE_RML_TAG_WARMUP_CONNECTION,
orte_rml_send_callback, NULL))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
} else {
target.vpid = 0;
}
/* send the information to the orted report-back point - this function
* will process the data, but also counts the number of
* orteds that reported back so the launch procedure can continue.
* We need to do this at the last possible second as the HNP
* can turn right around and begin issuing orders to us
*/
buffer = OBJ_NEW(opal_buffer_t);
/* insert our name for rollup purposes */
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, ORTE_PROC_MY_NAME, 1, ORTE_NAME))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
/* get any connection info we may have pushed */
{
opal_value_t *val = NULL, *kv;
opal_list_t *modex;
int32_t flag;
if (OPAL_SUCCESS != (ret = opal_pmix.get(ORTE_PROC_MY_NAME, NULL, NULL, &val)) || NULL == val) {
/* just pack a marker indicating we don't have any to share */
flag = 0;
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &flag, 1, OPAL_INT32))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
} else {
/* the data is returned as a list of key-value pairs in the opal_value_t */
if (OPAL_PTR == val->type) {
modex = (opal_list_t*)val->data.ptr;
flag = (int32_t)opal_list_get_size(modex);
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &flag, 1, OPAL_INT32))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
OPAL_LIST_FOREACH(kv, modex, opal_value_t) {
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &kv, 1, OPAL_VALUE))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
}
OPAL_LIST_RELEASE(modex);
} else {
opal_output(0, "VAL KEY: %s", (NULL == val->key) ? "NULL" : val->key);
/* single value */
flag = 1;
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &flag, 1, OPAL_INT32))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
if (ORTE_SUCCESS != (ret = opal_dss.pack(buffer, &val, 1, OPAL_VALUE))) {
ORTE_ERROR_LOG(ret);
OBJ_RELEASE(buffer);
goto DONE;
}
}
OBJ_RELEASE(val);
}
int ompi_mpi_init(int argc, char **argv, int requested, int *provided)
{
int ret;
ompi_proc_t** procs;
size_t nprocs;
char *error = NULL;
bool timing = false;
int param, value;
struct timeval ompistart, ompistop;
char *event_val = NULL;
opal_paffinity_base_cpu_set_t mask;
bool proc_bound;
#if 0
/* see comment below about sched_yield */
int num_processors;
#endif
bool orte_setup = false;
bool paffinity_enabled = false;
/* Setup enough to check get/set MCA params */
if (ORTE_SUCCESS != (ret = opal_init_util())) {
error = "ompi_mpi_init: opal_init_util failed";
goto error;
}
/* _After_ opal_init_util() but _before_ orte_init(), we need to
set an MCA param that tells libevent that it's ok to use any
mechanism in libevent that is available on this platform (e.g.,
epoll and friends). Per opal/event/event.s, we default to
select/poll -- but we know that MPI processes won't be using
pty's with the event engine, so it's ok to relax this
constraint and let any fd-monitoring mechanism be used. */
ret = mca_base_param_reg_string_name("opal", "event_include",
"Internal orted MCA param: tell opal_init() to use a specific mechanism in libevent",
false, false, "all", &event_val);
if (ret >= 0) {
/* We have to explicitly "set" the MCA param value here
because libevent initialization will re-register the MCA
param and therefore override the default. Setting the value
here puts the desired value ("all") in different storage
that is not overwritten if/when the MCA param is
re-registered. This is unless the user has specified a different
value for this MCA parameter. Make sure we check to see if the
default is specified before forcing "all" in case that is not what
the user desires. Note that we do *NOT* set this value as an
environment variable, just so that it won't be inherited by
any spawned processes and potentially cause unintented
side-effects with launching ORTE tools... */
if (0 == strcmp("all", event_val)) {
mca_base_param_set_string(ret, "all");
}
}
if( NULL != event_val ) {
free(event_val);
event_val = NULL;
}
/* check to see if we want timing information */
param = mca_base_param_reg_int_name("ompi", "timing",
"Request that critical timing loops be measured",
false, false, 0, &value);
if (value != 0) {
timing = true;
gettimeofday(&ompistart, NULL);
}
/* Setup ORTE - note that we are not a tool */
if (ORTE_SUCCESS != (ret = orte_init(ORTE_NON_TOOL))) {
error = "ompi_mpi_init: orte_init failed";
goto error;
}
orte_setup = true;
/* check for timing request - get stop time and report elapsed time if so */
if (timing && 0 == ORTE_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init [%ld]: time from start to completion of orte_init %ld usec",
(long)ORTE_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
/* Figure out the final MPI thread levels. If we were not
compiled for support for MPI threads, then don't allow
MPI_THREAD_MULTIPLE. Set this stuff up here early in the
process so that other components can make decisions based on
this value. */
ompi_mpi_thread_requested = requested;
if (OMPI_HAVE_THREAD_SUPPORT == 0) {
ompi_mpi_thread_provided = *provided = MPI_THREAD_SINGLE;
ompi_mpi_main_thread = NULL;
} else if (OMPI_ENABLE_MPI_THREADS == 1) {
ompi_mpi_thread_provided = *provided = requested;
ompi_mpi_main_thread = opal_thread_get_self();
} else {
if (MPI_THREAD_MULTIPLE == requested) {
ompi_mpi_thread_provided = *provided = MPI_THREAD_SERIALIZED;
} else {
ompi_mpi_thread_provided = *provided = requested;
}
ompi_mpi_main_thread = opal_thread_get_self();
}
ompi_mpi_thread_multiple = (ompi_mpi_thread_provided ==
MPI_THREAD_MULTIPLE);
/* Once we've joined the RTE, see if any MCA parameters were
passed to the MPI level */
if (OMPI_SUCCESS != (ret = ompi_mpi_register_params())) {
error = "mca_mpi_register_params() failed";
goto error;
}
/* if it hasn't already been done, setup process affinity.
* First check to see if a slot list was
* specified. If so, use it. If no slot list was specified,
* that's not an error -- just fall through and try the next
* paffinity scheme.
*/
ret = opal_paffinity_base_get(&mask);
if (OPAL_SUCCESS == ret) {
/* paffinity is supported - check for binding */
OPAL_PAFFINITY_PROCESS_IS_BOUND(mask, &proc_bound);
if (proc_bound) {
/* someone external set it - indicate it is set
* so that we know
*/
paffinity_enabled = true;
} else {
/* the system is capable of doing processor affinity, but it
* has not yet been set - see if a slot_list was given
*/
if (NULL != opal_paffinity_base_slot_list) {
/* It's an error if multiple paffinity schemes were specified */
if (opal_paffinity_alone) {
ret = OMPI_ERR_BAD_PARAM;
error = "Multiple processor affinity schemes specified (can only specify one)";
goto error;
}
ret = opal_paffinity_base_slot_list_set((long)ORTE_PROC_MY_NAME->vpid, opal_paffinity_base_slot_list);
if (OPAL_ERR_NOT_FOUND != ret) {
error = "opal_paffinity_base_slot_list_set() returned an error";
goto error;
}
paffinity_enabled = true;
} else if (opal_paffinity_alone) {
/* no slot_list, but they asked for paffinity */
int phys_cpu;
orte_node_rank_t nrank;
if (ORTE_NODE_RANK_INVALID == (nrank = orte_ess.get_node_rank(ORTE_PROC_MY_NAME))) {
error = "Could not get node rank - cannot set processor affinity";
goto error;
}
OPAL_PAFFINITY_CPU_ZERO(mask);
phys_cpu = opal_paffinity_base_get_physical_processor_id(nrank);
if (0 > phys_cpu) {
error = "Could not get physical processor id - cannot set processor affinity";
goto error;
}
OPAL_PAFFINITY_CPU_SET(phys_cpu, mask);
ret = opal_paffinity_base_set(mask);
if (OPAL_SUCCESS != ret) {
error = "Setting processor affinity failed";
goto error;
}
paffinity_enabled = true;
}
}
}
/* If we were able to set processor affinity, try setting up
memory affinity */
if (!opal_maffinity_setup && paffinity_enabled) {
if (OPAL_SUCCESS == opal_maffinity_base_open() &&
OPAL_SUCCESS == opal_maffinity_base_select()) {
opal_maffinity_setup = true;
}
}
/* initialize datatypes. This step should be done early as it will
* create the local convertor and local arch used in the proc
* init.
*/
if (OMPI_SUCCESS != (ret = ompi_ddt_init())) {
error = "ompi_ddt_init() failed";
goto error;
}
/* Initialize OMPI procs */
if (OMPI_SUCCESS != (ret = ompi_proc_init())) {
error = "mca_proc_init() failed";
goto error;
}
/* initialize ops. This has to be done *after* ddt_init, but
befor mca_coll_base_open, since come collective modules
(e.g. the hierarchical) need them in the query function
*/
if (OMPI_SUCCESS != (ret = ompi_op_init())) {
error = "ompi_op_init() failed";
goto error;
}
/* Open up MPI-related MCA components */
if (OMPI_SUCCESS != (ret = mca_allocator_base_open())) {
error = "mca_allocator_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_rcache_base_open())) {
error = "mca_rcache_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_mpool_base_open())) {
error = "mca_mpool_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_pml_base_open())) {
error = "mca_pml_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = mca_coll_base_open())) {
error = "mca_coll_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = ompi_osc_base_open())) {
error = "ompi_osc_base_open() failed";
goto error;
}
#if OPAL_ENABLE_FT == 1
if (OMPI_SUCCESS != (ret = ompi_crcp_base_open())) {
error = "ompi_crcp_base_open() failed";
goto error;
}
#endif
/* In order to reduce the common case for MPI apps (where they
don't use MPI-2 IO or MPI-1 topology functions), the io and
topo frameworks are initialized lazily, at the first use of
relevant functions (e.g., MPI_FILE_*, MPI_CART_*, MPI_GRAPH_*),
so they are not opened here. */
/* Select which MPI components to use */
if (OMPI_SUCCESS !=
(ret = mca_mpool_base_init(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_MPI_THREADS))) {
error = "mca_mpool_base_init() failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = mca_pml_base_select(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_MPI_THREADS))) {
error = "mca_pml_base_select() failed";
goto error;
}
/* select buffered send allocator component to be used */
ret=mca_pml_base_bsend_init(OMPI_ENABLE_MPI_THREADS);
if( OMPI_SUCCESS != ret ) {
error = "mca_pml_base_bsend_init() failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = mca_coll_base_find_available(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_MPI_THREADS))) {
error = "mca_coll_base_find_available() failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = ompi_osc_base_find_available(OMPI_ENABLE_PROGRESS_THREADS,
OMPI_ENABLE_MPI_THREADS))) {
error = "ompi_osc_base_find_available() failed";
goto error;
}
#if OPAL_ENABLE_FT == 1
if (OMPI_SUCCESS != (ret = ompi_crcp_base_select() ) ) {
error = "ompi_crcp_base_select() failed";
goto error;
}
#endif
/* io and topo components are not selected here -- see comment
above about the io and topo frameworks being loaded lazily */
/* Initialize each MPI handle subsystem */
/* initialize requests */
if (OMPI_SUCCESS != (ret = ompi_request_init())) {
error = "ompi_request_init() failed";
goto error;
}
/* initialize info */
if (OMPI_SUCCESS != (ret = ompi_info_init())) {
error = "ompi_info_init() failed";
goto error;
}
/* initialize error handlers */
if (OMPI_SUCCESS != (ret = ompi_errhandler_init())) {
error = "ompi_errhandler_init() failed";
goto error;
}
/* initialize error codes */
if (OMPI_SUCCESS != (ret = ompi_mpi_errcode_init())) {
error = "ompi_mpi_errcode_init() failed";
goto error;
}
/* initialize internal error codes */
if (OMPI_SUCCESS != (ret = ompi_errcode_intern_init())) {
error = "ompi_errcode_intern_init() failed";
goto error;
}
/* initialize groups */
if (OMPI_SUCCESS != (ret = ompi_group_init())) {
error = "ompi_group_init() failed";
goto error;
}
/* initialize communicators */
if (OMPI_SUCCESS != (ret = ompi_comm_init())) {
error = "ompi_comm_init() failed";
goto error;
}
/* initialize file handles */
if (OMPI_SUCCESS != (ret = ompi_file_init())) {
error = "ompi_file_init() failed";
goto error;
}
/* initialize windows */
if (OMPI_SUCCESS != (ret = ompi_win_init())) {
error = "ompi_win_init() failed";
goto error;
}
/* initialize attribute meta-data structure for comm/win/dtype */
if (OMPI_SUCCESS != (ret = ompi_attr_init())) {
error = "ompi_attr_init() failed";
goto error;
}
/* check for timing request - get stop time and report elapsed time if so */
if (timing && 0 == ORTE_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time from completion of orte_init to modex %ld usec",
(long)ORTE_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
/* exchange connection info - this function also acts as a barrier
* as it will not return until the exchange is complete
*/
if (OMPI_SUCCESS != (ret = orte_grpcomm.modex(NULL))) {
error = "orte_grpcomm_modex failed";
goto error;
}
if (timing && 0 == ORTE_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time to execute modex %ld usec",
(long)ORTE_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
/* identify the architectures of remote procs and setup
* their datatype convertors, if required
*/
if (OMPI_SUCCESS != (ret = ompi_proc_set_arch())) {
error = "ompi_proc_set_arch failed";
goto error;
}
/* If thread support was enabled, then setup OPAL to allow for
them. */
if ((OMPI_ENABLE_PROGRESS_THREADS == 1) ||
(*provided != MPI_THREAD_SINGLE)) {
opal_set_using_threads(true);
}
/* start PML/BTL's */
ret = MCA_PML_CALL(enable(true));
if( OMPI_SUCCESS != ret ) {
error = "PML control failed";
goto error;
}
/* add all ompi_proc_t's to PML */
if (NULL == (procs = ompi_proc_world(&nprocs))) {
error = "ompi_proc_world() failed";
goto error;
}
ret = MCA_PML_CALL(add_procs(procs, nprocs));
free(procs);
if( OMPI_SUCCESS != ret ) {
error = "PML add procs failed";
goto error;
}
MCA_PML_CALL(add_comm(&ompi_mpi_comm_world.comm));
MCA_PML_CALL(add_comm(&ompi_mpi_comm_self.comm));
/*
* Dump all MCA parameters if requested
*/
if (ompi_mpi_show_mca_params) {
ompi_show_all_mca_params(ompi_mpi_comm_world.comm.c_my_rank,
nprocs,
orte_process_info.nodename);
}
/* Do we need to wait for a debugger? */
ompi_wait_for_debugger();
/* check for timing request - get stop time and report elapsed
time if so, then start the clock again */
if (timing && 0 == ORTE_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time from modex thru complete oob wireup %ld usec",
(long)ORTE_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
/* wait for everyone to reach this point */
if (OMPI_SUCCESS != (ret = orte_grpcomm.barrier())) {
error = "orte_grpcomm_barrier failed";
goto error;
}
/* check for timing request - get stop time and report elapsed
time if so, then start the clock again */
if (timing && 0 == ORTE_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time to execute barrier %ld usec",
(long)ORTE_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
gettimeofday(&ompistart, NULL);
}
#if OMPI_ENABLE_PROGRESS_THREADS == 0
/* Start setting up the event engine for MPI operations. Don't
block in the event library, so that communications don't take
forever between procs in the dynamic code. This will increase
CPU utilization for the remainder of MPI_INIT when we are
blocking on ORTE-level events, but may greatly reduce non-TCP
latency. */
opal_progress_set_event_flag(OPAL_EVLOOP_NONBLOCK);
#endif
/* wire up the mpi interface, if requested. Do this after the
non-block switch for non-TCP performance. Do before the
polling change as anyone with a complex wire-up is going to be
using the oob. */
if (OMPI_SUCCESS != (ret = ompi_init_preconnect_mpi())) {
error = "ompi_mpi_do_preconnect_all() failed";
goto error;
}
/* Setup the publish/subscribe (PUBSUB) framework */
if (OMPI_SUCCESS != (ret = ompi_pubsub_base_open())) {
error = "ompi_pubsub_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = ompi_pubsub_base_select())) {
error = "ompi_pubsub_base_select() failed";
goto error;
}
/* Setup the dynamic process management (DPM) framework */
if (OMPI_SUCCESS != (ret = ompi_dpm_base_open())) {
error = "ompi_dpm_base_open() failed";
goto error;
}
if (OMPI_SUCCESS != (ret = ompi_dpm_base_select())) {
error = "ompi_dpm_base_select() failed";
goto error;
}
/* Init coll for the comms. This has to be after dpm_base_select,
(since dpm.mark_dyncomm is not set in the communicator creation
function else), but before dpm.dyncom_init, since this function
might require collective for the CID allocation. */
if (OMPI_SUCCESS !=
(ret = mca_coll_base_comm_select(MPI_COMM_WORLD))) {
error = "mca_coll_base_comm_select(MPI_COMM_WORLD) failed";
goto error;
}
if (OMPI_SUCCESS !=
(ret = mca_coll_base_comm_select(MPI_COMM_SELF))) {
error = "mca_coll_base_comm_select(MPI_COMM_SELF) failed";
goto error;
}
/* Check whether we have been spawned or not. We introduce that
at the very end, since we need collectives, datatypes, ptls
etc. up and running here.... */
if (OMPI_SUCCESS != (ret = ompi_dpm.dyn_init())) {
error = "ompi_comm_dyn_init() failed";
goto error;
}
/*
* Startup the Checkpoint/Restart Mech.
* Note: Always do this so tools don't hang when
* in a non-checkpointable build
*/
if (OMPI_SUCCESS != (ret = ompi_cr_init())) {
error = "ompi_cr_init";
goto error;
}
/* Undo OPAL calling opal_progress_event_users_increment() during
opal_init, to get better latency when not using TCP. Do
this *after* dyn_init, as dyn init uses lots of ORTE
communication and we don't want to hinder the performance of
that code. */
opal_progress_event_users_decrement();
/* see if yield_when_idle was specified - if so, use it */
param = mca_base_param_find("mpi", NULL, "yield_when_idle");
mca_base_param_lookup_int(param, &value);
if (value < 0) {
/* if no info is provided, just default to conservative */
opal_progress_set_yield_when_idle(true);
} else {
/* info was provided, so set idle accordingly */
opal_progress_set_yield_when_idle(value == 0 ? false : true);
}
param = mca_base_param_find("mpi", NULL, "event_tick_rate");
mca_base_param_lookup_int(param, &value);
/* negative value means use default - just don't do anything */
if (value >= 0) {
opal_progress_set_event_poll_rate(value);
}
/* At this point, we are fully configured and in MPI mode. Any
communication calls here will work exactly like they would in
the user's code. Setup the connections between procs and warm
them up with simple sends, if requested */
error:
if (ret != OMPI_SUCCESS) {
const char *err_msg = opal_strerror(ret);
/* If ORTE was not setup yet, don't use orte_show_help */
if (orte_setup) {
orte_show_help("help-mpi-runtime",
"mpi_init:startup:internal-failure", true,
"MPI_INIT", "MPI_INIT", error, err_msg, ret);
} else {
opal_show_help("help-mpi-runtime",
"mpi_init:startup:internal-failure", true,
"MPI_INIT", "MPI_INIT", error, err_msg, ret);
}
return ret;
}
/* Initialize the registered datarep list to be empty */
OBJ_CONSTRUCT(&ompi_registered_datareps, opal_list_t);
/* Initialize the arrays used to store the F90 types returned by the
* MPI_Type_create_f90_XXX functions.
*/
OBJ_CONSTRUCT( &ompi_mpi_f90_integer_hashtable, opal_hash_table_t);
opal_hash_table_init(&ompi_mpi_f90_integer_hashtable, 16 /* why not? */);
OBJ_CONSTRUCT( &ompi_mpi_f90_real_hashtable, opal_hash_table_t);
opal_hash_table_init(&ompi_mpi_f90_real_hashtable, FLT_MAX_10_EXP);
OBJ_CONSTRUCT( &ompi_mpi_f90_complex_hashtable, opal_hash_table_t);
opal_hash_table_init(&ompi_mpi_f90_complex_hashtable, FLT_MAX_10_EXP);
/* All done. Wasn't that simple? */
ompi_mpi_initialized = true;
/* check for timing request - get stop time and report elapsed time if so */
if (timing && 0 == ORTE_PROC_MY_NAME->vpid) {
gettimeofday(&ompistop, NULL);
opal_output(0, "ompi_mpi_init[%ld]: time from barrier p to complete mpi_init %ld usec",
(long)ORTE_PROC_MY_NAME->vpid,
(long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
(ompistop.tv_usec - ompistart.tv_usec)));
}
return MPI_SUCCESS;
}
int ompi_mpi_finalize(void)
{
int ret = MPI_SUCCESS;
opal_list_item_t *item;
ompi_proc_t** procs;
size_t nprocs;
OPAL_TIMING_DECLARE(tm);
OPAL_TIMING_INIT_EXT(&tm, OPAL_TIMING_GET_TIME_OF_DAY);
/* Be a bit social if an erroneous program calls MPI_FINALIZE in
two different threads, otherwise we may deadlock in
ompi_comm_free() (or run into other nasty lions, tigers, or
bears).
This lock is held for the duration of ompi_mpi_init() and
ompi_mpi_finalize(). Hence, if we get it, then no other thread
is inside the critical section (and we don't have to check the
*_started bool variables). */
opal_mutex_lock(&ompi_mpi_bootstrap_mutex);
if (!ompi_mpi_initialized || ompi_mpi_finalized) {
/* Note that if we're not initialized or already finalized, we
cannot raise an MPI exception. The best that we can do is
write something to stderr. */
char hostname[MAXHOSTNAMELEN];
pid_t pid = getpid();
gethostname(hostname, sizeof(hostname));
if (ompi_mpi_initialized) {
opal_show_help("help-mpi-runtime.txt",
"mpi_finalize: not initialized",
true, hostname, pid);
} else if (ompi_mpi_finalized) {
opal_show_help("help-mpi-runtime.txt",
"mpi_finalize:invoked_multiple_times",
true, hostname, pid);
}
opal_mutex_unlock(&ompi_mpi_bootstrap_mutex);
return MPI_ERR_OTHER;
}
ompi_mpi_finalize_started = true;
ompi_mpiext_fini();
/* Per MPI-2:4.8, we have to free MPI_COMM_SELF before doing
anything else in MPI_FINALIZE (to include setting up such that
MPI_FINALIZED will return true). */
if (NULL != ompi_mpi_comm_self.comm.c_keyhash) {
ompi_attr_delete_all(COMM_ATTR, &ompi_mpi_comm_self,
ompi_mpi_comm_self.comm.c_keyhash);
OBJ_RELEASE(ompi_mpi_comm_self.comm.c_keyhash);
ompi_mpi_comm_self.comm.c_keyhash = NULL;
}
/* Proceed with MPI_FINALIZE */
ompi_mpi_finalized = true;
/* As finalize is the last legal MPI call, we are allowed to force the release
* of the user buffer used for bsend, before going anywhere further.
*/
(void)mca_pml_base_bsend_detach(NULL, NULL);
#if OPAL_ENABLE_PROGRESS_THREADS == 0
opal_progress_set_event_flag(OPAL_EVLOOP_ONCE | OPAL_EVLOOP_NONBLOCK);
#endif
/* Redo ORTE calling opal_progress_event_users_increment() during
MPI lifetime, to get better latency when not using TCP */
opal_progress_event_users_increment();
/* check to see if we want timing information */
OPAL_TIMING_MSTART((&tm,"time to execute finalize barrier"));
/* NOTE: MPI-2.1 requires that MPI_FINALIZE is "collective" across
*all* connected processes. This only means that all processes
have to call it. It does *not* mean that all connected
processes need to synchronize (either directly or indirectly).
For example, it is quite easy to construct complicated
scenarios where one job is "connected" to another job via
transitivity, but have no direct knowledge of each other.
Consider the following case: job A spawns job B, and job B
later spawns job C. A "connectedness" graph looks something
like this:
A <--> B <--> C
So what are we *supposed* to do in this case? If job A is
still connected to B when it calls FINALIZE, should it block
until jobs B and C also call FINALIZE?
After lengthy discussions many times over the course of this
project, the issue was finally decided at the Louisville Feb
2009 meeting: no.
Rationale:
- "Collective" does not mean synchronizing. It only means that
every process call it. Hence, in this scenario, every
process in A, B, and C must call FINALIZE.
- KEY POINT: if A calls FINALIZE, then it is erroneous for B or
C to try to communicate with A again.
- Hence, OMPI is *correct* to only effect a barrier across each
jobs' MPI_COMM_WORLD before exiting. Specifically, if A
calls FINALIZE long before B or C, it's *correct* if A exits
at any time (and doesn't notify B or C that it is exiting).
- Arguably, if B or C do try to communicate with the now-gone
A, OMPI should try to print a nice error ("you tried to
communicate with a job that is already gone...") instead of
segv or other Badness. However, that is an *extremely*
difficult problem -- sure, it's easy for A to tell B that it
is finalizing, but how can A tell C? A doesn't even know
about C. You'd need to construct a "connected" graph in a
distributed fashion, which is fraught with race conditions,
etc.
Hence, our conclusion is: OMPI is *correct* in its current
behavior (of only doing a barrier across its own COMM_WORLD)
before exiting. Any problems that occur are as a result of
erroneous MPI applications. We *could* tighten up the erroneous
cases and ensure that we print nice error messages / don't
crash, but that is such a difficult problem that we decided we
have many other, much higher priority issues to handle that deal
with non-erroneous cases. */
/* Wait for everyone to reach this point. This is a grpcomm
barrier instead of an MPI barrier for (at least) two reasons:
1. An MPI barrier doesn't ensure that all messages have been
transmitted before exiting (e.g., a BTL can lie and buffer a
message without actually injecting it to the network, and
therefore require further calls to that BTL's progress), so
the possibility of a stranded message exists.
2. If the MPI communication is using an unreliable transport,
there's a problem of knowing that everyone has *left* the
barrier. E.g., one proc can send its ACK to the barrier
message to a peer and then leave the barrier, but the ACK
can get lost and therefore the peer is left in the barrier.
Point #1 has been known for a long time; point #2 emerged after
we added the first unreliable BTL to Open MPI and fixed the
del_procs behavior around May of 2014 (see
https://svn.open-mpi.org/trac/ompi/ticket/4669#comment:4 for
more details). */
opal_pmix.fence(NULL, 0);
/* check for timing request - get stop time and report elapsed
time if so */
OPAL_TIMING_MSTOP(&tm);
OPAL_TIMING_DELTAS(ompi_enable_timing, &tm);
OPAL_TIMING_REPORT(ompi_enable_timing_ext, &tm);
OPAL_TIMING_RELEASE(&tm);
/*
* Shutdown the Checkpoint/Restart Mech.
*/
if (OMPI_SUCCESS != (ret = ompi_cr_finalize())) {
OMPI_ERROR_LOG(ret);
}
/* Shut down any bindings-specific issues: C++, F77, F90 */
/* Remove all memory associated by MPI_REGISTER_DATAREP (per
MPI-2:9.5.3, there is no way for an MPI application to
*un*register datareps, but we don't want the OMPI layer causing
memory leaks). */
while (NULL != (item = opal_list_remove_first(&ompi_registered_datareps))) {
OBJ_RELEASE(item);
}
OBJ_DESTRUCT(&ompi_registered_datareps);
/* Remove all F90 types from the hash tables. As the OBJ_DESTRUCT will
* call a special destructor able to release predefined types, we can
* simply call the OBJ_DESTRUCT on the hash table and all memory will
* be correctly released.
*/
OBJ_DESTRUCT( &ompi_mpi_f90_integer_hashtable );
OBJ_DESTRUCT( &ompi_mpi_f90_real_hashtable );
OBJ_DESTRUCT( &ompi_mpi_f90_complex_hashtable );
/* Free communication objects */
/* free file resources */
if (OMPI_SUCCESS != (ret = ompi_file_finalize())) {
goto done;
}
/* free window resources */
if (OMPI_SUCCESS != (ret = ompi_win_finalize())) {
goto done;
}
if (OMPI_SUCCESS != (ret = ompi_osc_base_finalize())) {
goto done;
}
/* free communicator resources. this MUST come before finalizing the PML
* as this will call into the pml */
if (OMPI_SUCCESS != (ret = ompi_comm_finalize())) {
goto done;
}
/* call del_procs on all allocated procs even though some may not be known
* to the pml layer. the pml layer is expected to be resilient and ignore
* any unknown procs. */
nprocs = 0;
procs = ompi_proc_get_allocated (&nprocs);
MCA_PML_CALL(del_procs(procs, nprocs));
free(procs);
/* free pml resource */
if(OMPI_SUCCESS != (ret = mca_pml_base_finalize())) {
goto done;
}
/* free requests */
if (OMPI_SUCCESS != (ret = ompi_request_finalize())) {
goto done;
}
if (OMPI_SUCCESS != (ret = ompi_message_finalize())) {
goto done;
}
/* If requested, print out a list of memory allocated by ALLOC_MEM
but not freed by FREE_MEM */
if (0 != ompi_debug_show_mpi_alloc_mem_leaks) {
mca_mpool_base_tree_print(ompi_debug_show_mpi_alloc_mem_leaks);
}
/* Now that all MPI objects dealing with communications are gone,
shut down MCA types having to do with communications */
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_pml_base_framework) ) ) {
OMPI_ERROR_LOG(ret);
goto done;
}
/* shut down buffered send code */
mca_pml_base_bsend_fini();
#if OPAL_ENABLE_FT_CR == 1
/*
* Shutdown the CRCP Framework, must happen after PML shutdown
*/
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_crcp_base_framework) ) ) {
OMPI_ERROR_LOG(ret);
goto done;
}
#endif
/* Free secondary resources */
/* free attr resources */
if (OMPI_SUCCESS != (ret = ompi_attr_finalize())) {
goto done;
}
/* free group resources */
if (OMPI_SUCCESS != (ret = ompi_group_finalize())) {
goto done;
}
/* finalize the DPM subsystem */
if ( OMPI_SUCCESS != (ret = ompi_dpm_finalize())) {
goto done;
}
/* free internal error resources */
if (OMPI_SUCCESS != (ret = ompi_errcode_intern_finalize())) {
goto done;
}
/* free error code resources */
if (OMPI_SUCCESS != (ret = ompi_mpi_errcode_finalize())) {
goto done;
}
/* free errhandler resources */
if (OMPI_SUCCESS != (ret = ompi_errhandler_finalize())) {
goto done;
}
/* Free all other resources */
/* free op resources */
if (OMPI_SUCCESS != (ret = ompi_op_finalize())) {
goto done;
}
/* free ddt resources */
if (OMPI_SUCCESS != (ret = ompi_datatype_finalize())) {
goto done;
}
/* free info resources */
if (OMPI_SUCCESS != (ret = ompi_info_finalize())) {
goto done;
}
/* Close down MCA modules */
/* io is opened lazily, so it's only necessary to close it if it
was actually opened */
if (0 < ompi_io_base_framework.framework_refcnt) {
/* May have been "opened" multiple times. We want it closed now */
ompi_io_base_framework.framework_refcnt = 1;
if (OMPI_SUCCESS != mca_base_framework_close(&ompi_io_base_framework)) {
goto done;
}
}
(void) mca_base_framework_close(&ompi_topo_base_framework);
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_osc_base_framework))) {
goto done;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_coll_base_framework))) {
goto done;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_bml_base_framework))) {
goto done;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&opal_mpool_base_framework))) {
goto done;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&opal_rcache_base_framework))) {
goto done;
}
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&opal_allocator_base_framework))) {
goto done;
}
/* free proc resources */
if ( OMPI_SUCCESS != (ret = ompi_proc_finalize())) {
goto done;
}
if (NULL != ompi_mpi_main_thread) {
OBJ_RELEASE(ompi_mpi_main_thread);
ompi_mpi_main_thread = NULL;
}
/* Clean up memory/resources from the MPI dynamic process
functionality checker */
ompi_mpi_dynamics_finalize();
/* Leave the RTE */
if (OMPI_SUCCESS != (ret = ompi_rte_finalize())) {
goto done;
}
ompi_rte_initialized = false;
/* now close the rte framework */
if (OMPI_SUCCESS != (ret = mca_base_framework_close(&ompi_rte_base_framework) ) ) {
OMPI_ERROR_LOG(ret);
goto done;
}
if (OPAL_SUCCESS != (ret = opal_finalize_util())) {
goto done;
}
/* All done */
done:
opal_mutex_unlock(&ompi_mpi_bootstrap_mutex);
return ret;
}
