void idmanager_triggerAboutBridge() {
uint8_t number_bytes_from_input_buffer;
uint8_t input_buffer;
//get command from OpenSerial
number_bytes_from_input_buffer = openserial_getInputBuffer(&input_buffer,sizeof(input_buffer));
if (number_bytes_from_input_buffer!=sizeof(input_buffer)) {
openserial_printError(COMPONENT_IDMANAGER,ERR_INPUTBUFFER_LENGTH,
(errorparameter_t)number_bytes_from_input_buffer,
(errorparameter_t)1);
return;
};
//handle command
switch (input_buffer) {
case ACTION_YES:
idmanager_setIsBridge(TRUE);
break;
case ACTION_NO:
idmanager_setIsBridge(FALSE);
break;
case ACTION_TOGGLE:
if (idmanager_getIsBridge()) {
idmanager_setIsBridge(FALSE);
} else {
idmanager_setIsBridge(TRUE);
}
break;
}
return;
}
void icmpv6echo_trigger() {
uint8_t number_bytes_from_input_buffer;
uint8_t input_buffer[16];
OpenQueueEntry_t* msg;
//get command from OpenSerial (16B IPv6 destination address)
number_bytes_from_input_buffer = openserial_getInputBuffer(&(input_buffer[0]),sizeof(input_buffer));
if (number_bytes_from_input_buffer!=sizeof(input_buffer)) {
openserial_printError(COMPONENT_ICMPv6ECHO,ERR_INPUTBUFFER_LENGTH,
(errorparameter_t)number_bytes_from_input_buffer,
(errorparameter_t)0);
return;
};
icmpv6echo_vars.hisAddress.type = ADDR_128B;
memcpy(&(icmpv6echo_vars.hisAddress.addr_128b[0]),&(input_buffer[0]),16);
//send
if (icmpv6echo_vars.busySending==TRUE) {
openserial_printError(COMPONENT_ICMPv6ECHO,ERR_BUSY_SENDING,
(errorparameter_t)0,
(errorparameter_t)0);
} else {
icmpv6echo_vars.busySending = TRUE;
msg = openqueue_getFreePacketBuffer(COMPONENT_ICMPv6ECHO);
if (msg==NULL) {
openserial_printError(COMPONENT_ICMPv6ECHO,ERR_NO_FREE_PACKET_BUFFER,
(errorparameter_t)0,
(errorparameter_t)0);
icmpv6echo_vars.busySending = FALSE;
return;
}
//admin
msg->creator = COMPONENT_ICMPv6ECHO;
msg->owner = COMPONENT_ICMPv6ECHO;
//l4
msg->l4_protocol = IANA_ICMPv6;
msg->l4_sourcePortORicmpv6Type = IANA_ICMPv6_ECHO_REQUEST;
//l3
memcpy(&(msg->l3_destinationAdd),&icmpv6echo_vars.hisAddress,sizeof(open_addr_t));
//payload
packetfunctions_reserveHeaderSize(msg,4);
packetfunctions_htonl(0x789abcde,(uint8_t*)(msg->payload));
//ICMPv6 header
packetfunctions_reserveHeaderSize(msg,sizeof(ICMPv6_ht));
((ICMPv6_ht*)(msg->payload))->type = msg->l4_sourcePortORicmpv6Type;
((ICMPv6_ht*)(msg->payload))->code = 0;
// Below Identifier might need to be replaced by the identifier used by icmpv6rpl
// packetfunctions_htons(0x1234 ,(uint8_t*)&((ICMPv6_ht*)(msg->payload))->identifier);
// Below sequence_number might need to be removed
// packetfunctions_htons(icmpv6echo_vars.seq++ ,(uint8_t*)&((ICMPv6_ht*)(msg->payload))->sequence_number);
packetfunctions_calculateChecksum(msg,(uint8_t*)&(((ICMPv6_ht*)(msg->payload))->checksum));//do last
//send
if (icmpv6_send(msg)!=E_SUCCESS) {
icmpv6echo_vars.busySending = FALSE;
openqueue_freePacketBuffer(msg);
}
}
}
void openbridge_trigger() {
uint8_t input_buffer[136];//worst case: 8B of next hop + 128B of data
OpenQueueEntry_t* pkt;
uint8_t numDataBytes;
numDataBytes = openserial_getNumDataBytes();
openserial_getInputBuffer(&(input_buffer[0]),numDataBytes);
if (idmanager_getIsBridge()==TRUE && numDataBytes>0) {
pkt = openqueue_getFreePacketBuffer(COMPONENT_OPENBRIDGE);
if (pkt==NULL) {
openserial_printError(COMPONENT_OPENBRIDGE,ERR_NO_FREE_PACKET_BUFFER,
(errorparameter_t)0,
(errorparameter_t)0);
return;
}
//admin
pkt->creator = COMPONENT_OPENBRIDGE;
pkt->owner = COMPONENT_OPENBRIDGE;
//l2
pkt->l2_nextORpreviousHop.type = ADDR_64B;
memcpy(&(pkt->l2_nextORpreviousHop.addr_64b[0]),&(input_buffer[0]),8);
//payload
packetfunctions_reserveHeaderSize(pkt,numDataBytes-8);
memcpy(pkt->payload,&(input_buffer[8]),numDataBytes-8);
//send
if ((iphc_sendFromBridge(pkt))==E_FAIL) {
openqueue_freePacketBuffer(pkt);
}
}
}
void openbridge_triggerData(void) {
uint8_t input_buffer[136];//worst case: 8B of next hop + 128B of data
OpenQueueEntry_t* pkt;
uint8_t numDataBytes;
numDataBytes = openserial_getNumDataBytes();
//poipoi xv
//this is a temporal workaround as we are never supposed to get chunks of data
//longer than input buffer size.. I assume that HDLC will solve that.
// MAC header is 13B + 8 next hop so we cannot accept packets that are longer than 118B
if (numDataBytes>(136 - 21) || numDataBytes<8){
//to prevent too short or too long serial frames to kill the stack
openserial_printError(COMPONENT_OPENBRIDGE,ERR_INPUTBUFFER_LENGTH,
(errorparameter_t)numDataBytes,
(errorparameter_t)0);
return;
}
//copying the buffer once we know it is not too big
openserial_getInputBuffer(&(input_buffer[0]),numDataBytes);
if (idmanager_getIsDAGroot()==TRUE && numDataBytes>0) {
pkt = openqueue_getFreePacketBuffer(COMPONENT_OPENBRIDGE);
if (pkt==NULL) {
openserial_printError(COMPONENT_OPENBRIDGE,ERR_NO_FREE_PACKET_BUFFER,
(errorparameter_t)0,
(errorparameter_t)0);
return;
}
//admin
pkt->creator = COMPONENT_OPENBRIDGE;
pkt->owner = COMPONENT_OPENBRIDGE;
//l2
pkt->l2_nextORpreviousHop.type = ADDR_64B;
memcpy(&(pkt->l2_nextORpreviousHop.addr_64b[0]),&(input_buffer[0]),8);
//payload
packetfunctions_reserveHeaderSize(pkt,numDataBytes-8);
memcpy(pkt->payload,&(input_buffer[8]),numDataBytes-8);
//this is to catch the too short packet. remove it after fw-103 is solved.
if (numDataBytes<16){
openserial_printError(COMPONENT_OPENBRIDGE,ERR_INVALIDSERIALFRAME,
(errorparameter_t)0,
(errorparameter_t)0);
}
//send
if ((iphc_sendFromBridge(pkt))==E_FAIL) {
openqueue_freePacketBuffer(pkt);
}
}
}
void idmanager_triggerAboutRoot() {
uint8_t number_bytes_from_input_buffer;
uint8_t input_buffer[9];
open_addr_t myPrefix;
uint8_t dodagid[16];
//=== get command from OpenSerial
number_bytes_from_input_buffer = openserial_getInputBuffer(input_buffer,sizeof(input_buffer));
if (number_bytes_from_input_buffer!=sizeof(input_buffer)) {
openserial_printError(COMPONENT_IDMANAGER,ERR_INPUTBUFFER_LENGTH,
(errorparameter_t)number_bytes_from_input_buffer,
(errorparameter_t)0);
return;
};
//=== handle command
// take action (byte 0)
switch (input_buffer[0]) {
case ACTION_YES:
idmanager_setIsDAGroot(TRUE);
break;
case ACTION_NO:
idmanager_setIsDAGroot(FALSE);
break;
case ACTION_TOGGLE:
if (idmanager_getIsDAGroot()) {
idmanager_setIsDAGroot(FALSE);
} else {
idmanager_setIsDAGroot(TRUE);
}
break;
}
// store prefix (bytes 1-8)
myPrefix.type = ADDR_PREFIX;
memcpy(
myPrefix.prefix,
&input_buffer[1],
sizeof(myPrefix.prefix)
);
idmanager_setMyID(&myPrefix);
// indicate DODAGid to RPL
memcpy(&dodagid[0],idmanager_vars.myPrefix.prefix,8); // prefix
memcpy(&dodagid[8],idmanager_vars.my64bID.addr_64b,8); // eui64
icmpv6rpl_writeDODAGid(dodagid);
return;
}
void tcpinject_trigger() {
uint8_t number_bytes_from_input_buffer;
uint8_t input_buffer[18];
//get command from OpenSerial (16B IPv6 destination address, 2B destination port)
number_bytes_from_input_buffer = openserial_getInputBuffer(&(input_buffer[0]),sizeof(input_buffer));
if (number_bytes_from_input_buffer!=sizeof(input_buffer)) {
openserial_printError(COMPONENT_TCPINJECT,ERR_INPUTBUFFER_LENGTH,
(errorparameter_t)number_bytes_from_input_buffer,
(errorparameter_t)0);
return;
};
tcpinject_vars.hisAddress.type = ADDR_128B;
memcpy(&(tcpinject_vars.hisAddress.addr_128b[0]),&(input_buffer[0]),16);
tcpinject_vars.hisPort = packetfunctions_ntohs(&(input_buffer[16]));
//connect
opentcp_connect(&tcpinject_vars.hisAddress,tcpinject_vars.hisPort,WKP_TCP_INJECT);
}
void udpinject_trigger() {
OpenQueueEntry_t* pkt;
uint8_t number_bytes_from_input_buffer;
uint8_t input_buffer[18];
//get command from OpenSerial (16B IPv6 destination address, 2B destination port)
number_bytes_from_input_buffer = openserial_getInputBuffer(&(input_buffer[0]),sizeof(input_buffer));
if (number_bytes_from_input_buffer!=sizeof(input_buffer)) {
openserial_printError(COMPONENT_UDPINJECT,ERR_INPUTBUFFER_LENGTH,
(errorparameter_t)number_bytes_from_input_buffer,
(errorparameter_t)0);
return;
};
//prepare packet
pkt = openqueue_getFreePacketBuffer(COMPONENT_UDPINJECT);
if (pkt==NULL) {
openserial_printError(COMPONENT_UDPINJECT,ERR_NO_FREE_PACKET_BUFFER,
(errorparameter_t)0,
(errorparameter_t)0);
return;
}
pkt->creator = COMPONENT_UDPINJECT;
pkt->owner = COMPONENT_UDPINJECT;
pkt->l4_protocol = IANA_UDP;
pkt->l4_sourcePortORicmpv6Type = WKP_UDP_INJECT;
pkt->l4_destination_port = packetfunctions_ntohs(&(input_buffer[16]));
pkt->l3_destinationAdd.type = ADDR_128B;
memcpy(&(pkt->l3_destinationAdd.addr_128b[0]),&(input_buffer[0]),16);
packetfunctions_reserveHeaderSize(pkt,6);
((uint8_t*)pkt->payload)[0] = 'p';
((uint8_t*)pkt->payload)[1] = 'o';
((uint8_t*)pkt->payload)[2] = 'i';
((uint8_t*)pkt->payload)[3] = 'p';
((uint8_t*)pkt->payload)[4] = 'o';
((uint8_t*)pkt->payload)[5] = 'i';
//send packet
if ((openudp_send(pkt))==E_FAIL) {
openqueue_freePacketBuffer(pkt);
}
}
void openserial_handleCommands(void){
uint8_t input_buffer[20];
uint8_t numDataBytes;
uint8_t commandId;
uint8_t commandLen;
uint8_t comandParam_8;
uint16_t comandParam_16;
uint8_t code,cellOptions,numCell,listOffset,maxListLen;
uint8_t ptr;
cellInfo_ht celllist_add[CELLLIST_MAX_LEN];
cellInfo_ht celllist_delete[CELLLIST_MAX_LEN];
open_addr_t neighbor;
bool foundNeighbor;
ptr = 0;
memset(celllist_add,0,CELLLIST_MAX_LEN*sizeof(cellInfo_ht));
memset(celllist_delete,0,CELLLIST_MAX_LEN*sizeof(cellInfo_ht));
numDataBytes = openserial_getInputBufferFillLevel();
//copying the buffer
openserial_getInputBuffer(&(input_buffer[ptr]),numDataBytes);
ptr++;
commandId = openserial_vars.inputBuf[ptr];
ptr++;
commandLen = openserial_vars.inputBuf[ptr];
ptr++;
switch(commandId) {
case COMMAND_SET_EBPERIOD:
comandParam_8 = openserial_vars.inputBuf[ptr];
sixtop_setEBPeriod(comandParam_8); // one byte, in seconds
break;
case COMMAND_SET_CHANNEL:
comandParam_8 = openserial_vars.inputBuf[ptr];
// set communication channel for protocol stack
ieee154e_setSingleChannel(comandParam_8); // one byte
break;
case COMMAND_SET_KAPERIOD: // two bytes, in slots
comandParam_16 = (openserial_vars.inputBuf[ptr] & 0x00ff) | \
((openserial_vars.inputBuf[ptr+1]<<8) & 0xff00);
sixtop_setKaPeriod(comandParam_16);
break;
case COMMAND_SET_DIOPERIOD: // two bytes, in mili-seconds
comandParam_16 = (openserial_vars.inputBuf[ptr] & 0x00ff) | \
((openserial_vars.inputBuf[ptr+1]<<8) & 0xff00);
icmpv6rpl_setDIOPeriod(comandParam_16);
break;
case COMMAND_SET_DAOPERIOD: // two bytes, in mili-seconds
comandParam_16 = (openserial_vars.inputBuf[ptr] & 0x00ff) | \
((openserial_vars.inputBuf[ptr+1]<<8) & 0xff00);
icmpv6rpl_setDAOPeriod(comandParam_16);
break;
case COMMAND_SET_DAGRANK: // two bytes
comandParam_16 = (openserial_vars.inputBuf[ptr] & 0x00ff) | \
((openserial_vars.inputBuf[ptr+1]<<8) & 0xff00);
icmpv6rpl_setMyDAGrank(comandParam_16);
break;
case COMMAND_SET_SECURITY_STATUS: // one byte
comandParam_8 = openserial_vars.inputBuf[ptr];
ieee154e_setIsSecurityEnabled(comandParam_8);
break;
case COMMAND_SET_SLOTFRAMELENGTH: // two bytes
comandParam_16 = (openserial_vars.inputBuf[ptr] & 0x00ff) | \
((openserial_vars.inputBuf[ptr+1]<<8) & 0xff00);
schedule_setFrameLength(comandParam_16);
break;
case COMMAND_SET_ACK_STATUS:
comandParam_8 = openserial_vars.inputBuf[ptr];
ieee154e_setIsAckEnabled(comandParam_8);
break;
case COMMAND_SET_6P_ADD:
case COMMAND_SET_6P_DELETE:
case COMMAND_SET_6P_RELOCATE:
case COMMAND_SET_6P_COUNT:
case COMMAND_SET_6P_LIST:
case COMMAND_SET_6P_CLEAR:
// get preferred parent
foundNeighbor =icmpv6rpl_getPreferredParentEui64(&neighbor);
if (foundNeighbor==FALSE) {
break;
}
// the following sequence of bytes are, slotframe, cellOption, numCell, celllist
openserial_get6pInfo(commandId,&code,&cellOptions,&numCell,celllist_add,celllist_delete,&listOffset,&maxListLen,ptr,commandLen);
sixtop_request(
code, // code
&neighbor, // neighbor
numCell, // number cells
cellOptions, // cellOptions
celllist_add, // celllist to add
celllist_delete, // celllist to delete (not used)
msf_getsfid(), // sfid
listOffset, // list command offset (not used)
maxListLen // list command maximum celllist (not used)
);
break;
case COMMAND_SET_SLOTDURATION:
comandParam_16 = (openserial_vars.inputBuf[ptr] & 0x00ff) | \
((openserial_vars.inputBuf[ptr+1]<<8) & 0xff00);
ieee154e_setSlotDuration(comandParam_16);
break;
case COMMAND_SET_6PRESPONSE:
comandParam_8 = openserial_vars.inputBuf[ptr];
if (comandParam_8 ==1) {
sixtop_setIsResponseEnabled(TRUE);
} else {
if (comandParam_8 == 0) {
sixtop_setIsResponseEnabled(FALSE);
} else {
// security only can be 1 or 0
break;
}
}
break;
case COMMAND_SET_UINJECTPERIOD:
comandParam_8 = openserial_vars.inputBuf[ptr];
msf_appPktPeriod(comandParam_8);
break;
case COMMAND_SET_ECHO_REPLY_STATUS:
comandParam_8 = openserial_vars.inputBuf[ptr];
if (comandParam_8 == 1) {
icmpv6echo_setIsReplyEnabled(TRUE);
} else {
if (comandParam_8 == 0) {
icmpv6echo_setIsReplyEnabled(FALSE);
} else {
// ack reply
break;
}
}
break;
case COMMAND_SET_JOIN_KEY:
if (commandLen != 16) { break; }
idmanager_setJoinKey(&openserial_vars.inputBuf[ptr]);
break;
default:
// wrong command ID
break;
}
}
